TopologyElementalDensity

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Results.TopologyElementalDensity

Bases: object

Defines a TopologyElementalDensity.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
ClearGeneratedData	Clears the result.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
EvaluateAllResults	Run the EvaluateAllResults action.
ExportAnimation	Run the ExportAnimation action.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.

Properties

CalculateTimeHistory	Gets or sets the CalculateTimeHistory.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
DataModelObjectCategory	Gets the current DataModelObject's category.
ExclusionsParticipation	Gets or sets the ExclusionsParticipation.
Figures	Gets the list of associated figures.
FinalMass	Gets the FinalMass.
FinalVolume	Gets the FinalVolume.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
IterationNumber	Gets the IterationNumber.
IterationStep	Gets or sets the IterationStep.
Location	Gets or sets the Location.
Maximum	Gets the Maximum.
Minimum	Gets the Minimum.
OriginalMass	Gets the OriginalMass.
OriginalVolume	Gets the OriginalVolume.
PercentMassOfOriginal	Gets the PercentMassOfOriginal.
PercentVolumeOfOriginal	Gets the PercentVolumeOfOriginal.
Properties	Gets the list of properties for this object.
RetainedThreshold	Gets or sets the RetainedThreshold.
ScopingMethod	Gets or sets the ScopingMethod.
Selection	Gets or sets the Selection.
ShowOptimizedRegion	Gets or sets the ShowOptimizedRegion.
Suppressed	Gets or sets the Suppressed.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property TopologyElementalDensity.CalculateTimeHistory: bool | None

Gets or sets the CalculateTimeHistory.

property TopologyElementalDensity.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property TopologyElementalDensity.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property TopologyElementalDensity.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property TopologyElementalDensity.ExclusionsParticipation: bool | None

Gets or sets the ExclusionsParticipation.

property TopologyElementalDensity.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property TopologyElementalDensity.FinalMass: Ansys.Core.Units.Quantity | None

Gets the FinalMass.

property TopologyElementalDensity.FinalVolume: Ansys.Core.Units.Quantity | None

Gets the FinalVolume.

property TopologyElementalDensity.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property TopologyElementalDensity.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None

Gets the internal object. For advanced usage only.

property TopologyElementalDensity.IterationNumber: int | None

Gets the IterationNumber.

property TopologyElementalDensity.IterationStep: int | None

Gets or sets the IterationStep.

property TopologyElementalDensity.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property TopologyElementalDensity.Maximum: float | None

Gets the Maximum.

property TopologyElementalDensity.Minimum: float | None

Gets the Minimum.

property TopologyElementalDensity.OriginalMass: Ansys.Core.Units.Quantity | None

Gets the OriginalMass.

property TopologyElementalDensity.OriginalVolume: Ansys.Core.Units.Quantity | None

Gets the OriginalVolume.

property TopologyElementalDensity.PercentMassOfOriginal: float | None

Gets the PercentMassOfOriginal.

property TopologyElementalDensity.PercentVolumeOfOriginal: float | None

Gets the PercentVolumeOfOriginal.

property TopologyElementalDensity.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property TopologyElementalDensity.RetainedThreshold: float | None

Gets or sets the RetainedThreshold.

property TopologyElementalDensity.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ScopingMethod.

property TopologyElementalDensity.Selection: Ansys.ACT.Automation.Mechanical.OptimizationRegion | None

Gets or sets the Selection.

property TopologyElementalDensity.ShowOptimizedRegion: Ansys.Mechanical.DataModel.Enums.TopologyOptimizationResultShowType | None

Gets or sets the ShowOptimizedRegion.

property TopologyElementalDensity.Suppressed: bool | None

Gets or sets the Suppressed.

property TopologyElementalDensity.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

TopologyElementalDensity.Activate() → None

Activate the current object.

TopologyElementalDensity.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

TopologyElementalDensity.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

TopologyElementalDensity.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

TopologyElementalDensity.ClearGeneratedData() → None

Clears the result.

TopologyElementalDensity.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

TopologyElementalDensity.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

TopologyElementalDensity.Delete() → None

Run the Delete action.

TopologyElementalDensity.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

TopologyElementalDensity.EvaluateAllResults() → None

Run the EvaluateAllResults action.

TopologyElementalDensity.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None

Run the ExportAnimation action.

TopologyElementalDensity.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

TopologyElementalDensity.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

TopologyElementalDensity.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

TopologyElementalDensity.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

TopologyElementalDensity.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

TopologyElementalDensity.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

TopologyElementalDensity.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

TopologyElementalDensity.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.