MeshWorkflowGroup
#
- class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.MeshWorkflowGroup#
Bases:
object
Defines a MeshWorkflowGroup.
Overview#
|
Generates all mesh workflows, i.e. executes the “Input”, the “Steps”, and the “Output” as needed. |
|
Resets all mesh workflows completely, i.e. also the geometry scoping transferred into each mesh workflow will be reset and all inactive geometry parts/bodies will become active again. Steps, controls, and outcomes will be reset to their initial state while any user-defined property settings will remain as-is. |
|
Adds a new workflow to the “MeshWorkflowGroup” object. |
|
Get Mesh Quality Warning Limit |
|
Run the Delete action. |
|
Gets the list of children, filtered by type. |
|
Gets the list of children, filtered by type. |
|
Creates a new child Comment. |
|
Creates a new child Figure. |
|
Creates a new child Image. |
|
Activate the current object. |
|
Copies all visible properties from this object to another. |
|
Creates a copy of the current DataModelObject. |
|
Run the GroupAllSimilarChildren action. |
|
Run the GroupSimilarObjects action. |
|
Get a property by its unique name. |
|
Get a property by its API name. |
|
Creates a new parameter for a Property. |
|
Gets the parameter corresponding to the given property. |
|
Removes the parameter from the parameter set corresponding to the given property. |
|
Gets the internal object. For advanced usage only. |
|
Gets the ActiveWorkflow. |
|
Gets the current DataModelObject’s category. |
|
Gets the list of children. |
|
Gets the list of associated comments. |
|
Gets the list of associated figures. |
|
Gets the list of associated images. |
|
Gets the internal object. For advanced usage only. |
|
Gets the list of properties for this object. |
|
Gets the list of properties that are visible for this object. |
Property detail#
- property MeshWorkflowGroup.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSEngineeringModelAuto | None
Gets the internal object. For advanced usage only.
- property MeshWorkflowGroup.ActiveWorkflow: Ansys.ACT.Automation.Mechanical.MeshWorkflow | None
Gets the ActiveWorkflow.
- property MeshWorkflowGroup.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None
Gets the current DataModelObject’s category.
- property MeshWorkflowGroup.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None
Gets the list of children.
- property MeshWorkflowGroup.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None
Gets the list of associated comments.
- property MeshWorkflowGroup.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None
Gets the list of associated figures.
- property MeshWorkflowGroup.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None
Gets the list of associated images.
- property MeshWorkflowGroup.InternalObject: System.Object | None
Gets the internal object. For advanced usage only.
- property MeshWorkflowGroup.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties for this object.
- property MeshWorkflowGroup.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None
Gets the list of properties that are visible for this object.
Method detail#
- MeshWorkflowGroup.GenerateWorkflows() System.Void
Generates all mesh workflows, i.e. executes the “Input”, the “Steps”, and the “Output” as needed.
- MeshWorkflowGroup.ClearGeneratedData() System.Void
Resets all mesh workflows completely, i.e. also the geometry scoping transferred into each mesh workflow will be reset and all inactive geometry parts/bodies will become active again. Steps, controls, and outcomes will be reset to their initial state while any user-defined property settings will remain as-is.
- MeshWorkflowGroup.AddMeshWorkflow(type: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.WorkflowType) Ansys.ACT.Automation.Mechanical.MeshWorkflow
Adds a new workflow to the “MeshWorkflowGroup” object.
- MeshWorkflowGroup.GetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity
Get Mesh Quality Warning Limit
- MeshWorkflowGroup.Delete() System.Void
Run the Delete action.
- MeshWorkflowGroup.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) System.Collections.Generic.IList[ChildrenType]
Gets the list of children, filtered by type.
- MeshWorkflowGroup.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]
Gets the list of children, filtered by type.
- MeshWorkflowGroup.AddComment() Ansys.ACT.Automation.Mechanical.Comment
Creates a new child Comment.
- MeshWorkflowGroup.AddFigure() Ansys.ACT.Automation.Mechanical.Figure
Creates a new child Figure.
- MeshWorkflowGroup.AddImage(filePath: System.String) Ansys.ACT.Automation.Mechanical.Image
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
- MeshWorkflowGroup.Activate() System.Void
Activate the current object.
- MeshWorkflowGroup.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) System.Void
Copies all visible properties from this object to another.
- MeshWorkflowGroup.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject
Creates a copy of the current DataModelObject.
- MeshWorkflowGroup.GroupAllSimilarChildren() System.Void
Run the GroupAllSimilarChildren action.
- MeshWorkflowGroup.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder
Run the GroupSimilarObjects action.
- MeshWorkflowGroup.PropertyByName(name: System.String) Ansys.ACT.Automation.Mechanical.Property
Get a property by its unique name.
- MeshWorkflowGroup.PropertyByAPIName(name: System.String) Ansys.ACT.Automation.Mechanical.Property
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
- MeshWorkflowGroup.CreateParameter(propName: System.String) Ansys.ACT.Interfaces.Mechanical.IParameter
Creates a new parameter for a Property.
- MeshWorkflowGroup.GetParameter(propName: System.String) Ansys.ACT.Interfaces.Mechanical.IParameter
Gets the parameter corresponding to the given property.
- MeshWorkflowGroup.RemoveParameter(propName: System.String) System.Void
Removes the parameter from the parameter set corresponding to the given property.