RemotePoint
#
- class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.RemotePoint#
Bases:
object
Defines a RemotePoint.
Overview#
Activate the current object. |
|
Creates a new CommandSnippet |
|
Creates a new child Comment. |
|
Copies all visible properties from this object to another. |
|
Creates a new parameter for a Property. |
|
Run the Delete action. |
|
Creates a copy of the current DataModelObject. |
|
Gets the list of children, filtered by type. |
|
Returns the mesh region associated to the remote point. |
|
Gets the parameter corresponding to the given property. |
|
Run the GroupAllSimilarChildren action. |
|
Run the GroupSimilarObjects action. |
|
Run the PromoteToNamedSelection action. |
|
Get a property by its API name. |
|
Get a property by its unique name. |
|
Removes the parameter from the parameter set corresponding to the given property. |
Gets or sets the Behavior. |
|
Gets the list of children. |
|
Gets the list of associated comments. |
|
Gets or sets the CoordinateSystem. |
|
Gets or sets the DOFSelection. |
|
Gets the current DataModelObject's category. |
|
Gets or sets the Formulation. |
|
Remote point is globally available |
|
Gets the internal object. For advanced usage only. |
|
Gets or sets the Location. |
|
Gets or sets the Material. |
|
Gets or sets the OutlineSelection. |
|
Gets or sets the PilotNodeAPDLName. |
|
Gets or sets the PilotNodeScopingType. |
|
Gets or sets the PinballRegion. |
|
Gets or sets the Point. |
|
Gets the list of properties for this object. |
|
Gets or sets the Radius. |
|
Gets or sets the ReadOnly. |
|
Gets or sets the RelaxationMethod. |
|
Gets or sets the RotationX. |
|
Gets or sets the RotationY. |
|
Gets or sets the RotationZ. |
|
Gets or sets the ScopingMethod. |
|
Gets or sets the Suppressed. |
|
Gets the list of properties that are visible for this object. |
|
Gets or sets the XComponent. |
|
Gets or sets the XCoordinate. |
|
Gets or sets the YComponent. |
|
Gets or sets the YCoordinate. |
|
Gets or sets the ZComponent. |
|
Gets or sets the ZCoordinate. |
Property detail#
- property RemotePoint.Behavior: Ansys.Mechanical.DataModel.Enums.LoadBehavior | None#
Gets or sets the Behavior.
- property RemotePoint.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#
Gets the list of children.
- property RemotePoint.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#
Gets the list of associated comments.
- property RemotePoint.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the CoordinateSystem.
- property RemotePoint.DOFSelection: Ansys.Mechanical.DataModel.Enums.RemotePointDOFSelectionType | None#
Gets or sets the DOFSelection.
- property RemotePoint.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#
Gets the current DataModelObject's category.
- property RemotePoint.Formulation: Ansys.Mechanical.DataModel.Enums.RemotePointFormulation | None#
Gets or sets the Formulation.
- property RemotePoint.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSRemotePointAuto | None#
Gets the internal object. For advanced usage only.
- property RemotePoint.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the Location.
- property RemotePoint.OutlineSelection: Iterable[Ansys.ACT.Automation.Mechanical.RemotePoint] | None#
Gets or sets the OutlineSelection.
- property RemotePoint.PilotNodeScopingType: Ansys.Mechanical.DataModel.Enums.PilotNodeScopingType | None#
Gets or sets the PilotNodeScopingType.
- property RemotePoint.PinballRegion: Ansys.Core.Units.Quantity | None#
Gets or sets the PinballRegion.
- property RemotePoint.Point: Ansys.ACT.Automation.Mechanical.ConstructionPoint | None#
Gets or sets the Point.
- property RemotePoint.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties for this object.
- property RemotePoint.RotationX: Ansys.Mechanical.DataModel.Enums.ActiveOrInactive | None#
Gets or sets the RotationX.
- property RemotePoint.RotationY: Ansys.Mechanical.DataModel.Enums.ActiveOrInactive | None#
Gets or sets the RotationY.
- property RemotePoint.RotationZ: Ansys.Mechanical.DataModel.Enums.ActiveOrInactive | None#
Gets or sets the RotationZ.
- property RemotePoint.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#
Gets or sets the ScopingMethod.
- property RemotePoint.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties that are visible for this object.
- property RemotePoint.XComponent: Ansys.Mechanical.DataModel.Enums.ActiveOrInactive | None#
Gets or sets the XComponent.
- property RemotePoint.YComponent: Ansys.Mechanical.DataModel.Enums.ActiveOrInactive | None#
Gets or sets the YComponent.
- property RemotePoint.ZComponent: Ansys.Mechanical.DataModel.Enums.ActiveOrInactive | None#
Gets or sets the ZComponent.
Method detail#
- RemotePoint.AddCommandSnippet() Ansys.ACT.Automation.Mechanical.CommandSnippet #
Creates a new CommandSnippet
- RemotePoint.AddComment() Ansys.ACT.Automation.Mechanical.Comment #
Creates a new child Comment.
- RemotePoint.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None #
Copies all visible properties from this object to another.
- RemotePoint.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Creates a new parameter for a Property.
- RemotePoint.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject #
Creates a copy of the current DataModelObject.
- RemotePoint.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType] #
Gets the list of children, filtered by type.
- RemotePoint.GetMeshRegion() Ansys.ACT.Interfaces.Mesh.IMeshRegion #
Returns the mesh region associated to the remote point.
- RemotePoint.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Gets the parameter corresponding to the given property.
- RemotePoint.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder #
Run the GroupSimilarObjects action.
- RemotePoint.PromoteToNamedSelection() Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection] #
Run the PromoteToNamedSelection action.
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.