ContactRegion
#
- class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Connections.ContactRegion#
Bases:
object
Defines a ContactRegion.
Overview#
Activate the current object. |
|
Creates a new CommandSnippet |
|
Creates a new child Comment. |
|
Creates a new child Figure. |
|
Creates a new child Image. |
|
Creates a new PythonCodeEventBased |
|
Copies all visible properties from this object to another. |
|
Creates a new parameter for a Property. |
|
Run the Delete action. |
|
Creates a copy of the current DataModelObject. |
|
Run the FlipContactTarget action. |
|
Gets the list of children, filtered by type. |
|
Gets the parameter corresponding to the given property. |
|
Run the GroupAllSimilarChildren action. |
|
Run the GroupSimilarObjects action. |
|
Run the LoadContactRegionSettings action. |
|
Run the PromoteToNamedSelection action. |
|
Run the PromoteToRemotePoint action. |
|
Get a property by its API name. |
|
Get a property by its unique name. |
|
Removes the parameter from the parameter set corresponding to the given property. |
|
Run the RenameBasedOnDefinition action. |
|
Run the ResetToDefault action. |
|
Run the SaveContactRegionSettings action. |
|
Run the SearchConnectionsForDuplicatePairs action. |
|
Run the SetDefaultAPDLNames action. |
Gets the AutomaticDetectionValue. |
|
Gets or sets the AutomaticElectricCapacitance. |
|
Gets or sets the AutomaticElectricConductance. |
|
Gets or sets the AutomaticNormalStiffness. |
|
Gets or sets the AutomaticThermalConductance. |
|
Gets or sets the BeamBeamDetection. |
|
Gets or sets the BeamBeamModel. |
|
Gets or sets the BeamMaterialName. |
|
Gets or sets the BeamRadius. |
|
Gets or sets the Behavior. |
|
Gets or sets the BondedMaximumOffset. |
|
Gets or sets the Breakable. |
|
Gets the list of children. |
|
Gets the list of associated comments. |
|
Gets or sets the ConstraintType. |
|
Gets or sets the ContactAPDLName. |
|
Gets the ContactBodies. |
|
Gets or sets the ContactCenterPoint. |
|
Gets or sets the ContactEndingPoint. |
|
Gets or sets the ContactFormulation. |
|
Gets or sets the ContactGeometryCorrection. |
|
Gets or sets the ContactOrientation. |
|
Gets or sets the ContactShellFace. |
|
Gets or sets the ContactStartingPoint. |
|
Gets or sets the ContactType. |
|
Gets or sets the ContinuousDistanceComputation. |
|
Gets the current DataModelObject's category. |
|
Gets or sets the DecayConstant. |
|
Gets or sets the DetectionMethod. |
|
Gets or sets the DisplayElementNormal. |
|
Gets or sets the DynamicCoefficient. |
|
Gets or sets the EdgeContactType. |
|
Gets or sets the ElasticSlipTolerance. |
|
Gets or sets the ElasticSlipToleranceFactor. |
|
Gets or sets the ElasticSlipToleranceValue. |
|
Gets or sets the ElectricCapacitanceValue. |
|
Gets or sets the ElectricConductanceValue. |
|
Gets the list of associated figures. |
|
Gets or sets the FlipContact. |
|
Gets or sets the FlipTarget. |
|
Gets or sets the FrictionCoefficient. |
|
Gets or sets the Handedness. |
|
Gets the list of associated images. |
|
Gets or sets the InitialClearance. |
|
Gets or sets the InitialClearanceFactor. |
|
Gets or sets the InitialClearanceValue. |
|
Gets or sets the InterfaceTreatment. |
|
Gets the internal object. For advanced usage only. |
|
Gets or sets the LineLineDetection. |
|
Gets or sets the Material. |
|
Gets or sets the MeanPitchDiameter. |
|
Gets or sets the NormalForceExponent. |
|
Gets or sets the NormalForceLimit. |
|
Gets or sets the NormalStiffnessFactor. |
|
Gets or sets the NormalStiffnessValue. |
|
Gets or sets the NormalStiffnessValueType. |
|
Gets or sets the NormalStressExponent. |
|
Gets or sets the NormalStressLimit. |
|
Gets or sets the PenetrationTolerance. |
|
Gets or sets the PenetrationToleranceFactor. |
|
Gets or sets the PenetrationToleranceValue. |
|
Gets or sets the PinballFactor. |
|
Gets or sets the PinballRadius. |
|
Gets or sets the PinballRegion. |
|
Gets or sets the PitchDistance. |
|
Gets or sets the PressureAtZeroPenetration. |
|
Gets or sets the PressureAtZeroPenetrationFactor. |
|
Gets or sets the PressureAtZeroPenetrationValue. |
|
Gets the list of properties for this object. |
|
Gets or sets the Protected. |
|
Gets or sets the RBDContactDetection. |
|
Gets or sets the ReadOnly. |
|
Gets or sets the RestitutionFactor. |
|
Gets the ScopeMode. |
|
Gets or sets the SharedSourceBody. |
|
Gets or sets the SharedSourceReverseNormalLocation. |
|
Gets or sets the SharedTargetBody. |
|
Gets or sets the SharedTargetReverseNormalLocation. |
|
Gets or sets the ShearForceExponent. |
|
Gets or sets the ShearForceLimit. |
|
Gets or sets the ShearStressExponent. |
|
Gets or sets the ShearStressLimit. |
|
Gets or sets the ShellThicknessEffect. |
|
Gets or sets the SmallSliding. |
|
Gets or sets the SourceLocation. |
|
Gets or sets the StabilizationDampingFactor. |
|
Gets or sets the Suppressed. |
|
Gets or sets the TargetAPDLName. |
|
Gets the TargetBodies. |
|
Gets or sets the TargetCenterPoint. |
|
Gets or sets the TargetEndingPoint. |
|
Gets or sets the TargetGeometryCorrection. |
|
Gets or sets the TargetLocation. |
|
Gets or sets the TargetOrientation. |
|
Gets or sets the TargetShellFace. |
|
Gets or sets the TargetStartingPoint. |
|
Gets or sets the ThermalConductanceValue. |
|
Gets or sets the ThreadAngle. |
|
Gets or sets the ThreadType. |
|
Gets or sets the TimeStepControls. |
|
Gets or sets the TrimContact. |
|
Gets or sets the TrimTolerance. |
|
Gets or sets the UpdateStiffness. |
|
Gets or sets the UserOffset. |
|
Gets the list of properties that are visible for this object. |
Property detail#
- property ContactRegion.AutomaticDetectionValue: Ansys.Core.Units.Quantity | None#
Gets the AutomaticDetectionValue.
- property ContactRegion.AutomaticElectricCapacitance: bool | None#
Gets or sets the AutomaticElectricCapacitance.
- property ContactRegion.AutomaticElectricConductance: bool | None#
Gets or sets the AutomaticElectricConductance.
- property ContactRegion.AutomaticNormalStiffness: bool | None#
Gets or sets the AutomaticNormalStiffness.
- property ContactRegion.AutomaticThermalConductance: bool | None#
Gets or sets the AutomaticThermalConductance.
- property ContactRegion.BeamBeamDetection: Ansys.Mechanical.DataModel.Enums.BeamBeamContactDetectionType | None#
Gets or sets the BeamBeamDetection.
- property ContactRegion.BeamBeamModel: Ansys.Mechanical.DataModel.Enums.BeamBeamModel | None#
Gets or sets the BeamBeamModel.
- property ContactRegion.BeamRadius: Ansys.Core.Units.Quantity | None#
Gets or sets the BeamRadius.
- property ContactRegion.Behavior: Ansys.Mechanical.DataModel.Enums.ContactBehavior | None#
Gets or sets the Behavior.
- property ContactRegion.BondedMaximumOffset: Ansys.Core.Units.Quantity | None#
Gets or sets the BondedMaximumOffset.
- property ContactRegion.Breakable: Ansys.Mechanical.DataModel.Enums.BondedBreakableType | None#
Gets or sets the Breakable.
- property ContactRegion.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#
Gets the list of children.
- property ContactRegion.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#
Gets the list of associated comments.
- property ContactRegion.ConstraintType: Ansys.Mechanical.DataModel.Enums.ContactConstraintType | None#
Gets or sets the ConstraintType.
- property ContactRegion.ContactCenterPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the ContactCenterPoint.
- property ContactRegion.ContactEndingPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the ContactEndingPoint.
- property ContactRegion.ContactFormulation: Ansys.Mechanical.DataModel.Enums.ContactFormulation | None#
Gets or sets the ContactFormulation.
- property ContactRegion.ContactGeometryCorrection: Ansys.Mechanical.DataModel.Enums.ContactCorrection | None#
Gets or sets the ContactGeometryCorrection.
- property ContactRegion.ContactOrientation: Ansys.Mechanical.DataModel.Enums.ContactOrientation | None#
Gets or sets the ContactOrientation.
- property ContactRegion.ContactShellFace: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#
Gets or sets the ContactShellFace.
- property ContactRegion.ContactStartingPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the ContactStartingPoint.
- property ContactRegion.ContactType: Ansys.Mechanical.DataModel.Enums.ContactType | None#
Gets or sets the ContactType.
- property ContactRegion.ContinuousDistanceComputation: Ansys.Mechanical.DataModel.Enums.YesNoProgrammedControlled | None#
Gets or sets the ContinuousDistanceComputation.
- property ContactRegion.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#
Gets the current DataModelObject's category.
- property ContactRegion.DetectionMethod: Ansys.Mechanical.DataModel.Enums.ContactDetectionPoint | None#
Gets or sets the DetectionMethod.
- property ContactRegion.EdgeContactType: Ansys.Mechanical.DataModel.Enums.EdgeContactType | None#
Gets or sets the EdgeContactType.
- property ContactRegion.ElasticSlipTolerance: Ansys.Mechanical.DataModel.Enums.ContactElasticSlipToleranceType | None#
Gets or sets the ElasticSlipTolerance.
- property ContactRegion.ElasticSlipToleranceFactor: float | None#
Gets or sets the ElasticSlipToleranceFactor.
- property ContactRegion.ElasticSlipToleranceValue: Ansys.Core.Units.Quantity | None#
Gets or sets the ElasticSlipToleranceValue.
- property ContactRegion.ElectricCapacitanceValue: Ansys.Core.Units.Quantity | None#
Gets or sets the ElectricCapacitanceValue.
- property ContactRegion.ElectricConductanceValue: Ansys.Core.Units.Quantity | None#
Gets or sets the ElectricConductanceValue.
- property ContactRegion.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#
Gets the list of associated figures.
- property ContactRegion.Handedness: Ansys.Mechanical.DataModel.Enums.ContactBoltThreadHand | None#
Gets or sets the Handedness.
- property ContactRegion.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#
Gets the list of associated images.
- property ContactRegion.InitialClearance: Ansys.Mechanical.DataModel.Enums.InitialClearanceType | None#
Gets or sets the InitialClearance.
- property ContactRegion.InitialClearanceFactor: float | None#
Gets or sets the InitialClearanceFactor.
- property ContactRegion.InitialClearanceValue: Ansys.Core.Units.Quantity | None#
Gets or sets the InitialClearanceValue.
- property ContactRegion.InterfaceTreatment: Ansys.Mechanical.DataModel.Enums.ContactInitialEffect | None#
Gets or sets the InterfaceTreatment.
- property ContactRegion.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSContactRegionAuto | None#
Gets the internal object. For advanced usage only.
- property ContactRegion.LineLineDetection: Ansys.Mechanical.DataModel.Enums.LineLineContactDetectionType | None#
Gets or sets the LineLineDetection.
- property ContactRegion.MeanPitchDiameter: Ansys.Core.Units.Quantity | None#
Gets or sets the MeanPitchDiameter.
- property ContactRegion.NormalForceLimit: Ansys.Core.Units.Quantity | None#
Gets or sets the NormalForceLimit.
- property ContactRegion.NormalStiffnessValue: Ansys.Core.Units.Quantity | None#
Gets or sets the NormalStiffnessValue.
- property ContactRegion.NormalStiffnessValueType: Ansys.Mechanical.DataModel.Enums.ElementControlsNormalStiffnessType | None#
Gets or sets the NormalStiffnessValueType.
- property ContactRegion.NormalStressLimit: Ansys.Core.Units.Quantity | None#
Gets or sets the NormalStressLimit.
- property ContactRegion.PenetrationTolerance: Ansys.Mechanical.DataModel.Enums.ContactPenetrationToleranceType | None#
Gets or sets the PenetrationTolerance.
- property ContactRegion.PenetrationToleranceFactor: float | None#
Gets or sets the PenetrationToleranceFactor.
- property ContactRegion.PenetrationToleranceValue: Ansys.Core.Units.Quantity | None#
Gets or sets the PenetrationToleranceValue.
- property ContactRegion.PinballRadius: Ansys.Core.Units.Quantity | None#
Gets or sets the PinballRadius.
- property ContactRegion.PinballRegion: Ansys.Mechanical.DataModel.Enums.ContactPinballType | None#
Gets or sets the PinballRegion.
- property ContactRegion.PitchDistance: Ansys.Core.Units.Quantity | None#
Gets or sets the PitchDistance.
- property ContactRegion.PressureAtZeroPenetration: Ansys.Mechanical.DataModel.Enums.PressureAtZeroPenetrationType | None#
Gets or sets the PressureAtZeroPenetration.
- property ContactRegion.PressureAtZeroPenetrationFactor: float | None#
Gets or sets the PressureAtZeroPenetrationFactor.
- property ContactRegion.PressureAtZeroPenetrationValue: Ansys.Core.Units.Quantity | None#
Gets or sets the PressureAtZeroPenetrationValue.
- property ContactRegion.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties for this object.
- property ContactRegion.RBDContactDetection: Ansys.Mechanical.DataModel.Enums.DSRBDContactDetection | None#
Gets or sets the RBDContactDetection.
- property ContactRegion.ScopeMode: Ansys.Mechanical.DataModel.Enums.AutomaticOrManual | None#
Gets the ScopeMode.
Gets or sets the SharedSourceBody.
Gets or sets the SharedSourceReverseNormalLocation.
Gets or sets the SharedTargetBody.
Gets or sets the SharedTargetReverseNormalLocation.
- property ContactRegion.ShearForceLimit: Ansys.Core.Units.Quantity | None#
Gets or sets the ShearForceLimit.
- property ContactRegion.ShearStressLimit: Ansys.Core.Units.Quantity | None#
Gets or sets the ShearStressLimit.
- property ContactRegion.SmallSliding: Ansys.Mechanical.DataModel.Enums.ContactSmallSlidingType | None#
Gets or sets the SmallSliding.
- property ContactRegion.SourceLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the SourceLocation.
- property ContactRegion.StabilizationDampingFactor: float | None#
Gets or sets the StabilizationDampingFactor.
- property ContactRegion.TargetCenterPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the TargetCenterPoint.
- property ContactRegion.TargetEndingPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the TargetEndingPoint.
- property ContactRegion.TargetGeometryCorrection: Ansys.Mechanical.DataModel.Enums.TargetCorrection | None#
Gets or sets the TargetGeometryCorrection.
- property ContactRegion.TargetLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the TargetLocation.
- property ContactRegion.TargetOrientation: Ansys.Mechanical.DataModel.Enums.TargetOrientation | None#
Gets or sets the TargetOrientation.
- property ContactRegion.TargetShellFace: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#
Gets or sets the TargetShellFace.
- property ContactRegion.TargetStartingPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the TargetStartingPoint.
- property ContactRegion.ThermalConductanceValue: Ansys.Core.Units.Quantity | None#
Gets or sets the ThermalConductanceValue.
- property ContactRegion.ThreadAngle: Ansys.Core.Units.Quantity | None#
Gets or sets the ThreadAngle.
- property ContactRegion.ThreadType: Ansys.Mechanical.DataModel.Enums.ContactBoltThreadType | None#
Gets or sets the ThreadType.
- property ContactRegion.TimeStepControls: Ansys.Mechanical.DataModel.Enums.ContactTimeStepControls | None#
Gets or sets the TimeStepControls.
- property ContactRegion.TrimContact: Ansys.Mechanical.DataModel.Enums.ContactTrimType | None#
Gets or sets the TrimContact.
- property ContactRegion.TrimTolerance: Ansys.Core.Units.Quantity | None#
Gets or sets the TrimTolerance.
- property ContactRegion.UpdateStiffness: Ansys.Mechanical.DataModel.Enums.UpdateContactStiffness | None#
Gets or sets the UpdateStiffness.
- property ContactRegion.UserOffset: Ansys.Core.Units.Quantity | None#
Gets or sets the UserOffset.
Method detail#
- ContactRegion.AddCommandSnippet() Ansys.ACT.Automation.Mechanical.CommandSnippet #
Creates a new CommandSnippet
- ContactRegion.AddComment() Ansys.ACT.Automation.Mechanical.Comment #
Creates a new child Comment.
- ContactRegion.AddFigure() Ansys.ACT.Automation.Mechanical.Figure #
Creates a new child Figure.
- ContactRegion.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image #
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
- ContactRegion.AddPythonCodeEventBased() Ansys.ACT.Automation.Mechanical.PythonCodeEventBased #
Creates a new PythonCodeEventBased
- ContactRegion.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None #
Copies all visible properties from this object to another.
- ContactRegion.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Creates a new parameter for a Property.
- ContactRegion.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject #
Creates a copy of the current DataModelObject.
- ContactRegion.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType] #
Gets the list of children, filtered by type.
- ContactRegion.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Gets the parameter corresponding to the given property.
- ContactRegion.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder #
Run the GroupSimilarObjects action.
- ContactRegion.LoadContactRegionSettings(fName: str) None #
Run the LoadContactRegionSettings action.
- ContactRegion.PromoteToNamedSelection() Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection] #
Run the PromoteToNamedSelection action.
- ContactRegion.PromoteToRemotePoint() Iterable[Ansys.ACT.Automation.Mechanical.RemotePoint] #
Run the PromoteToRemotePoint action.
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
- ContactRegion.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property #
Get a property by its unique name.
- ContactRegion.RemoveParameter(propName: str) None #
Removes the parameter from the parameter set corresponding to the given property.
- ContactRegion.SaveContactRegionSettings(fName: str) None #
Run the SaveContactRegionSettings action.