`EndRelease`#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.EndRelease#

Bases: object

Defines a EndRelease.

Overview#

Methods

`Delete`	Run the Delete action.
`GetChildren`	Gets the list of children, filtered by type.
`GetChildren`	Gets the list of children, filtered by type.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`Activate`	Activate the current object.
`CopyTo`	Copies all visible properties from this object to another.
`Duplicate`	Creates a copy of the current DataModelObject.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PropertyByName`	Get a property by its unique name.
`PropertyByAPIName`	Get a property by its API name.
`CreateParameter`	Creates a new parameter for a Property.
`GetParameter`	Gets the parameter corresponding to the given property.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.

Properties

`CoordinateSystem`	Gets or sets the Coordinate System.
`InternalObject`	Gets the internal object. For advanced usage only.
`Behavior`	Gets or sets the Behavior.
`RotationX`	Gets or sets the RotationX.
`RotationY`	Gets or sets the RotationY.
`RotationZ`	Gets or sets the RotationZ.
`TranslationX`	Gets or sets the TranslationX.
`TranslationY`	Gets or sets the TranslationY.
`TranslationZ`	Gets or sets the TranslationZ.
`IndependentEdges`	Gets or sets the IndependentEdges.
`Suppressed`	Gets or sets the Suppressed.
`EdgeLocation`	Gets or sets the EdgeLocation.
`VertexLocation`	Gets or sets the VertexLocation.
`DataModelObjectCategory`	Gets the current DataModelObject’s category.
`Children`	Gets the list of children.
`Comments`	Gets the list of associated comments.
`Figures`	Gets the list of associated figures.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`Properties`	Gets the list of properties for this object.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Property detail#

property EndRelease.CoordinateSystem: Ansys.Mechanical.DataModel.Interfaces.ICoordinateSystemSelection | None: Gets or sets the Coordinate System.

property EndRelease.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSBeamEndReleaseAuto | None: Gets the internal object. For advanced usage only.

property EndRelease.Behavior: Ansys.Mechanical.DataModel.Enums.BeamEndReleaseBehavior | None: Gets or sets the Behavior.

property EndRelease.RotationX: Ansys.Mechanical.DataModel.Enums.FixedOrFree | None: Gets or sets the RotationX.

property EndRelease.RotationY: Ansys.Mechanical.DataModel.Enums.FixedOrFree | None: Gets or sets the RotationY.

property EndRelease.RotationZ: Ansys.Mechanical.DataModel.Enums.FixedOrFree | None: Gets or sets the RotationZ.

property EndRelease.TranslationX: Ansys.Mechanical.DataModel.Enums.FixedOrFree | None: Gets or sets the TranslationX.

property EndRelease.TranslationY: Ansys.Mechanical.DataModel.Enums.FixedOrFree | None: Gets or sets the TranslationY.

property EndRelease.TranslationZ: Ansys.Mechanical.DataModel.Enums.FixedOrFree | None: Gets or sets the TranslationZ.

property EndRelease.IndependentEdges: System.Boolean | None: Gets or sets the IndependentEdges.

property EndRelease.Suppressed: System.Boolean | None: Gets or sets the Suppressed.

property EndRelease.EdgeLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None: Gets or sets the EdgeLocation.

property EndRelease.VertexLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None: Gets or sets the VertexLocation.

property EndRelease.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None: Gets the current DataModelObject’s category.

property EndRelease.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets the list of children.

property EndRelease.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None: Gets the list of associated comments.

property EndRelease.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None: Gets the list of associated figures.

property EndRelease.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None: Gets the list of associated images.

property EndRelease.InternalObject: System.Object | None: Gets the internal object. For advanced usage only.

property EndRelease.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties for this object.

property EndRelease.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties that are visible for this object.

Method detail#

EndRelease.Delete() → System.Void: Run the Delete action.

EndRelease.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]: Gets the list of children, filtered by type.

EndRelease.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Gets the list of children, filtered by type.

EndRelease.AddComment() → Ansys.ACT.Automation.Mechanical.Comment: Creates a new child Comment.

EndRelease.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure: Creates a new child Figure.

EndRelease.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

EndRelease.Activate() → System.Void: Activate the current object.

EndRelease.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void: Copies all visible properties from this object to another.

EndRelease.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Creates a copy of the current DataModelObject.

EndRelease.GroupAllSimilarChildren() → System.Void: Run the GroupAllSimilarChildren action.

EndRelease.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder: Run the GroupSimilarObjects action.

EndRelease.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property: Get a property by its unique name.

EndRelease.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

EndRelease.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Creates a new parameter for a Property.

EndRelease.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Gets the parameter corresponding to the given property.

EndRelease.RemoveParameter(propName: System.String) → System.Void: Removes the parameter from the parameter set corresponding to the given property.