`MembraneStressEquivalent`#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Results.StressResults.MembraneStressEquivalent#

Bases: object

Defines a MembraneStressEquivalent.

Overview#

Methods

`Activate`	Activate the current object.
`AddAlert`	Creates a new Alert
`AddComment`	Creates a new child Comment.
`AddConvergence`	Creates a new Convergence
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`ClearGeneratedData`	Run the ClearGeneratedData action.
`CopyTo`	Copies all visible properties from this object to another.
`CreateParameter`	CreateParameter method.
`CreateResultsAtAllSets`	Creates results at all sets for results under a solution.
`Delete`	Run the Delete action.
`Duplicate`	Creates a copy of the current DataModelObject.
`DuplicateWithoutResults`	Run the DuplicateWithoutResults action.
`EvaluateAllResults`	Run the EvaluateAllResults action.
`ExportAnimation`	Run the ExportAnimation action.
`ExportToTextFile`	Run the ExportToTextFile action.
`FetchRemoteResults`	Run the FetchRemoteResult action.
`GetChildren`	Gets the list of children, filtered by type.
`GetParameter`	Gets the parameter corresponding to the given property.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PromoteToNamedSelection`	Run the PromoteToNamedSelection action.
`PropertyByAPIName`	Get a property by its API name.
`PropertyByName`	Get a property by its unique name.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.
`RenameBasedOnDefinition`	Run the RenameBasedOnDefinition action.

Properties

`Amplitude`	Gets or sets the Amplitude.
`Average`	Gets the Average.
`AverageAcrossBodies`	Gets or sets the AverageAcrossBodies.
`AverageRadiusOfCurvature`	Gets or sets the AverageRadiusOfCurvature.
`BendingInside`	Gets the BendingInside.
`BendingOutside`	Gets the BendingOutside.
`By`	Gets or sets the By.
`CalculateTimeHistory`	Gets or sets the CalculateTimeHistory.
`Children`	Gets the list of children.
`CombinationNumber`	Gets or sets the Combination Number for a Solution Combination result.
`Comments`	Gets the list of associated comments.
`CoordinateSystem`	Gets or sets the Coordinate System.
`CrackFrontNumber`	Gets or sets the CrackFrontNumber.
`CyclicMode`	Gets or sets the CyclicMode.
`DataModelObjectCategory`	Gets the current DataModelObject's category.
`DisplayOption`	Gets or sets the DisplayOption.
`DisplayTime`	Gets or sets the DisplayTime.
`DpfEvaluation`	Gets or sets the DpfEvaluation.
`EnvironmentSelection`	Gets or sets the EnvironmentSelection.
`Figures`	Gets the list of associated figures.
`Frequency`	Gets or sets the Frequency.
`GlobalIDs`	Gets or sets the GlobalIDs.
`GraphControlsXAxis`	Gets or sets the GraphControlsXAxis.
`HarmonicIndex`	Gets or sets the HarmonicIndex.
`Identifier`	Gets or sets the Identifier.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`IsSolved`	Gets the IsSolved.
`ItemType`	Gets or sets the ItemType.
`IterationNumber`	Gets the IterationNumber.
`IterationStep`	Gets or sets the IterationStep.
`Layer`	Gets or sets the Layer.
`Linearized2DBehavior`	Gets or sets the Linearized2DBehavior.
`LoadMultiplier`	Gets the LoadMultiplier.
`LoadStep`	Gets the LoadStep.
`LoadStepForMaximumOfMaximumValues`	Get the Load Step for the maximum of maximum values.
`LoadStepForMaximumOfMinimumValues`	Get the Load Step for the maximum of minimum values.
`LoadStepForMinimumOfMaximumValues`	Get the Load Step for the minimum of maximum values.
`LoadStepForMinimumOfMinimumValues`	Get the Load Step for the minimum of minimum values.
`LoadStepNumber`	Gets or sets the LoadStepNumber.
`Location`	Gets or sets the Location.
`Maximum`	Gets the Maximum.
`MaximumOccursOn`	Gets the MaximumOccursOn.
`MaximumOfMaximumOverTime`	Gets the MaximumOfMaximumOverTime.
`MaximumOfMinimumOverTime`	Gets the MaximumOfMinimumOverTime.
`Membrane`	Gets the Membrane.
`MembraneBendingCenter`	Gets the MembraneBendingCenter.
`MembraneBendingInside`	Gets the MembraneBendingInside.
`MembraneBendingOutside`	Gets the MembraneBendingOutside.
`Minimum`	Gets the Minimum.
`MinimumOccursOn`	Gets the MinimumOccursOn.
`MinimumOfMaximumOverTime`	Gets the MinimumOfMaximumOverTime.
`MinimumOfMinimumOverTime`	Gets the MinimumOfMinimumOverTime.
`Mode`	Gets or sets the Mode.
`NamedSelections`	Gets or sets the NamedSelections.
`NormalOrientation`	Gets or sets the NormalOrientation.
`Path`	Path property.
`PeakCenter`	Gets the PeakCenter.
`PeakInside`	Gets the PeakInside.
`PeakOutside`	Gets the PeakOutside.
`PhaseIncrement`	Gets or sets the PhaseIncrement.
`Plies`	Plies property.
`PlotData`	Gets the result table.
`Ply`	Gets or sets the Ply selection.
`Position`	Gets or sets the Position.
`Probability`	Gets the Probability.
`Properties`	Gets the list of properties for this object.
`ReportedFrequency`	Gets the ReportedFrequency.
`ScaleFactor`	Gets or sets the ScaleFactor.
`ScopingMethod`	Gets or sets the ScopingMethod.
`SetNumber`	Gets or sets the Set Number.
`SolutionCombinationDriver`	Gets or sets the SolutionCombinationDriver.
`SolverComponentIDs`	Gets or sets the SolverComponentIDs.
`StressStrainType`	Gets or sets the StressStrainType.
`SubScopeBy`	Gets or sets the SubScopeBy.
`Substep`	Gets the Substep.
`Subtype`	Gets or sets the Subtype.
`Suppressed`	Gets or sets the Suppressed.
`Surface`	Surface property.
`SurfaceCoating`	SurfaceCoating property.
`SweepingPhase`	Gets or sets the SweepingPhase.
`ThroughThicknessBendingStress`	Gets or sets the ThroughThicknessBendingStress.
`Time`	Gets the Time.
`TimeForMaximumOfMaximumValues`	Get the Time for the maximum of maximum values.
`TimeForMaximumOfMinimumValues`	Get the Time for the maximum of minimum values.
`TimeForMinimumOfMaximumValues`	Get the Time for the minimum of maximum values.
`TimeForMinimumOfMinimumValues`	Get the Time for the minimum of minimum values.
`TotalCenter`	Gets the TotalCenter.
`TotalInside`	Gets the TotalInside.
`TotalOutside`	Gets the TotalOutside.
`VisibleProperties`	Gets the list of properties that are visible for this object.
`WaterfallShowTextOnMosaic`	Gets or sets the Waterfall Mosaic Text Property.

Property detail#

property MembraneStressEquivalent.Amplitude: bool | None#: Gets or sets the Amplitude.

property MembraneStressEquivalent.Average: Ansys.Core.Units.Quantity | None#: Gets the Average.

property MembraneStressEquivalent.AverageAcrossBodies: bool | None#: Gets or sets the AverageAcrossBodies.

property MembraneStressEquivalent.AverageRadiusOfCurvature: Ansys.Core.Units.Quantity | None#: Gets or sets the AverageRadiusOfCurvature.

property MembraneStressEquivalent.BendingInside: Ansys.Core.Units.Quantity | None#: Gets the BendingInside.

property MembraneStressEquivalent.BendingOutside: Ansys.Core.Units.Quantity | None#: Gets the BendingOutside.

property MembraneStressEquivalent.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None#: Gets or sets the By.

property MembraneStressEquivalent.CalculateTimeHistory: bool | None#: Gets or sets the CalculateTimeHistory.

property MembraneStressEquivalent.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets the list of children.

property MembraneStressEquivalent.CombinationNumber: int | None#: Gets or sets the Combination Number for a Solution Combination result.

property MembraneStressEquivalent.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#: Gets the list of associated comments.

property MembraneStressEquivalent.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#: Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property MembraneStressEquivalent.CrackFrontNumber: int | None#: Gets or sets the CrackFrontNumber.

property MembraneStressEquivalent.CyclicMode: int | None#: Gets or sets the CyclicMode.

property MembraneStressEquivalent.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#: Gets the current DataModelObject's category.

property MembraneStressEquivalent.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None#: Gets or sets the DisplayOption.

property MembraneStressEquivalent.DisplayTime: Ansys.Core.Units.Quantity | None#: Gets or sets the DisplayTime.

property MembraneStressEquivalent.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None#: Gets or sets the DpfEvaluation.

property MembraneStressEquivalent.EnvironmentSelection: Ansys.ACT.Automation.Mechanical.Analysis | None#: Gets or sets the EnvironmentSelection.

property MembraneStressEquivalent.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#: Gets the list of associated figures.

property MembraneStressEquivalent.Frequency: Ansys.Core.Units.Quantity | None#: Gets or sets the Frequency.

property MembraneStressEquivalent.GlobalIDs: str | None#: Gets or sets the GlobalIDs.

property MembraneStressEquivalent.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None#: Gets or sets the GraphControlsXAxis.

property MembraneStressEquivalent.HarmonicIndex: int | None#: Gets or sets the HarmonicIndex.

property MembraneStressEquivalent.Identifier: str | None#: Gets or sets the Identifier.

property MembraneStressEquivalent.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#: Gets the list of associated images.

property MembraneStressEquivalent.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None#: Gets the internal object. For advanced usage only.

property MembraneStressEquivalent.IsSolved: bool | None#: Gets the IsSolved.

property MembraneStressEquivalent.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None#: Gets or sets the ItemType.

property MembraneStressEquivalent.IterationNumber: int | None#: Gets the IterationNumber.

property MembraneStressEquivalent.IterationStep: int | None#: Gets or sets the IterationStep.

property MembraneStressEquivalent.Layer: int | None#: Gets or sets the Layer.

property MembraneStressEquivalent.Linearized2DBehavior: Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None#: Gets or sets the Linearized2DBehavior.

property MembraneStressEquivalent.LoadMultiplier: float | None#: Gets the LoadMultiplier.

property MembraneStressEquivalent.LoadStep: int | None#: Gets the LoadStep.

property MembraneStressEquivalent.LoadStepForMaximumOfMaximumValues: int | None#: Get the Load Step for the maximum of maximum values.

property MembraneStressEquivalent.LoadStepForMaximumOfMinimumValues: int | None#: Get the Load Step for the maximum of minimum values.

property MembraneStressEquivalent.LoadStepForMinimumOfMaximumValues: int | None#: Get the Load Step for the minimum of maximum values.

property MembraneStressEquivalent.LoadStepForMinimumOfMinimumValues: int | None#: Get the Load Step for the minimum of minimum values.

property MembraneStressEquivalent.LoadStepNumber: int | None#: Gets or sets the LoadStepNumber.

property MembraneStressEquivalent.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#: Gets or sets the Location.

property MembraneStressEquivalent.Maximum: Ansys.Core.Units.Quantity | None#: Gets the Maximum.

property MembraneStressEquivalent.MaximumOccursOn: str | None#: Gets the MaximumOccursOn.

property MembraneStressEquivalent.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MaximumOfMaximumOverTime.

property MembraneStressEquivalent.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MaximumOfMinimumOverTime.

property MembraneStressEquivalent.Membrane: Ansys.Core.Units.Quantity | None#: Gets the Membrane.

property MembraneStressEquivalent.MembraneBendingCenter: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingCenter.

property MembraneStressEquivalent.MembraneBendingInside: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingInside.

property MembraneStressEquivalent.MembraneBendingOutside: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingOutside.

property MembraneStressEquivalent.Minimum: Ansys.Core.Units.Quantity | None#: Gets the Minimum.

property MembraneStressEquivalent.MinimumOccursOn: str | None#: Gets the MinimumOccursOn.

property MembraneStressEquivalent.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MinimumOfMaximumOverTime.

property MembraneStressEquivalent.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MinimumOfMinimumOverTime.

property MembraneStressEquivalent.Mode: int | None#: Gets or sets the Mode.

property MembraneStressEquivalent.NamedSelections: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets or sets the NamedSelections.

property MembraneStressEquivalent.NormalOrientation: Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None#: Gets or sets the NormalOrientation.

property MembraneStressEquivalent.Path: Ansys.ACT.Automation.Mechanical.Path | None#: Path property.

property MembraneStressEquivalent.PeakCenter: Ansys.Core.Units.Quantity | None#: Gets the PeakCenter.

property MembraneStressEquivalent.PeakInside: Ansys.Core.Units.Quantity | None#: Gets the PeakInside.

property MembraneStressEquivalent.PeakOutside: Ansys.Core.Units.Quantity | None#: Gets the PeakOutside.

property MembraneStressEquivalent.PhaseIncrement: Ansys.Core.Units.Quantity | None#: Gets or sets the PhaseIncrement.

property MembraneStressEquivalent.Plies: Iterable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None#: Plies property.

property MembraneStressEquivalent.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None#: Gets the result table.

property MembraneStressEquivalent.Ply: Iterable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None#: Gets or sets the Ply selection.

property MembraneStressEquivalent.Position: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#: Gets or sets the Position.

property MembraneStressEquivalent.Probability: float | None#: Gets the Probability.

property MembraneStressEquivalent.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties for this object.

property MembraneStressEquivalent.ReportedFrequency: Ansys.Core.Units.Quantity | None#: Gets the ReportedFrequency.

property MembraneStressEquivalent.ScaleFactor: Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None#: Gets or sets the ScaleFactor.

property MembraneStressEquivalent.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#: Gets or sets the ScopingMethod.

property MembraneStressEquivalent.SetNumber: int | None#: Gets or sets the Set Number.

property MembraneStressEquivalent.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None#: Gets or sets the SolutionCombinationDriver.

property MembraneStressEquivalent.SolverComponentIDs: str | None#: Gets or sets the SolverComponentIDs.

property MembraneStressEquivalent.StressStrainType: Ansys.Mechanical.DataModel.Enums.StressStrainType | None#: Gets or sets the StressStrainType.

property MembraneStressEquivalent.SubScopeBy: Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None#: Gets or sets the SubScopeBy.

property MembraneStressEquivalent.Substep: int | None#: Gets the Substep.

property MembraneStressEquivalent.Subtype: Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None#: Gets or sets the Subtype.

property MembraneStressEquivalent.Suppressed: bool | None#: Gets or sets the Suppressed.

property MembraneStressEquivalent.Surface: Ansys.ACT.Automation.Mechanical.Surface | None#: Surface property.

property MembraneStressEquivalent.SurfaceCoating: Ansys.ACT.Automation.Mechanical.SurfaceCoating | None#: SurfaceCoating property.

property MembraneStressEquivalent.SweepingPhase: Ansys.Core.Units.Quantity | None#: Gets or sets the SweepingPhase.

property MembraneStressEquivalent.ThroughThicknessBendingStress: Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None#: Gets or sets the ThroughThicknessBendingStress.

property MembraneStressEquivalent.Time: Ansys.Core.Units.Quantity | None#: Gets the Time.

property MembraneStressEquivalent.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the maximum of maximum values.

property MembraneStressEquivalent.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the maximum of minimum values.

property MembraneStressEquivalent.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the minimum of maximum values.

property MembraneStressEquivalent.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the minimum of minimum values.

property MembraneStressEquivalent.TotalCenter: Ansys.Core.Units.Quantity | None#: Gets the TotalCenter.

property MembraneStressEquivalent.TotalInside: Ansys.Core.Units.Quantity | None#: Gets the TotalInside.

property MembraneStressEquivalent.TotalOutside: Ansys.Core.Units.Quantity | None#: Gets the TotalOutside.

property MembraneStressEquivalent.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties that are visible for this object.

property MembraneStressEquivalent.WaterfallShowTextOnMosaic: bool | None#: Gets or sets the Waterfall Mosaic Text Property.

Method detail#

MembraneStressEquivalent.Activate() → None#: Activate the current object.

MembraneStressEquivalent.AddAlert() → Ansys.ACT.Automation.Mechanical.Results.Alert#: Creates a new Alert

MembraneStressEquivalent.AddComment() → Ansys.ACT.Automation.Mechanical.Comment#: Creates a new child Comment.

MembraneStressEquivalent.AddConvergence() → Ansys.ACT.Automation.Mechanical.Results.Convergence#: Creates a new Convergence

MembraneStressEquivalent.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure#: Creates a new child Figure.

MembraneStressEquivalent.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image#

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

MembraneStressEquivalent.ClearGeneratedData() → None#: Run the ClearGeneratedData action.

MembraneStressEquivalent.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None#: Copies all visible properties from this object to another.

MembraneStressEquivalent.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: CreateParameter method.

MembraneStressEquivalent.CreateResultsAtAllSets() → List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]#: Creates results at all sets for results under a solution.

MembraneStressEquivalent.Delete() → None#: Run the Delete action.

MembraneStressEquivalent.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Creates a copy of the current DataModelObject.

MembraneStressEquivalent.DuplicateWithoutResults() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Run the DuplicateWithoutResults action.

MembraneStressEquivalent.EvaluateAllResults() → None#: Run the EvaluateAllResults action.

MembraneStressEquivalent.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None#: Run the ExportAnimation action.

MembraneStressEquivalent.ExportToTextFile(filePath: str) → None#: Run the ExportToTextFile action.

MembraneStressEquivalent.FetchRemoteResults() → None#: Run the FetchRemoteResult action.

MembraneStressEquivalent.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]#: Gets the list of children, filtered by type.

MembraneStressEquivalent.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: Gets the parameter corresponding to the given property.

MembraneStressEquivalent.GroupAllSimilarChildren() → None#: Run the GroupAllSimilarChildren action.

MembraneStressEquivalent.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#: Run the GroupSimilarObjects action.

MembraneStressEquivalent.PromoteToNamedSelection() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]#: Run the PromoteToNamedSelection action.

MembraneStressEquivalent.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property#

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MembraneStressEquivalent.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property#: Get a property by its unique name.

MembraneStressEquivalent.RemoveParameter(propName: str) → None#: Removes the parameter from the parameter set corresponding to the given property.

MembraneStressEquivalent.RenameBasedOnDefinition() → None#: Run the RenameBasedOnDefinition action.