`EXDAnalysisSettings`#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.AnalysisSettings.EXDAnalysisSettings#

Bases: object

Defines Analysis Settings for Explicit Dynamics System. Note: Cycles in the UI are referred to as TimeSteps in API

Overview#

Methods

`GetStepEndTime`	Gets the Step End Time at a given solution step.
`SetStepEndTime`	Sets the Step End Time for a given solution step.
`GetLoadStepType`	Gets the LoadStepType for a step.
`SetLoadStepType`	Sets the LoadStepType for a step.
`getADRConvergenceMethod`	Gets the Covergence Method for ADR loadstep.
`setADRConvergenceMethod`	Sets the Covergence Method for ADR loadstep.
`getADRConvergenceTolerance`	Gets the Covergence Tolerance for ADR loadstep.
`setADRConvergenceTolerance`	Sets the Covergence Tolerance for ADR loadstep.
`getADRMaximumIterations`	Gets the Maximum Iterations for ADR loadstep.
`setADRMaximumIterations`	Sets the Maximum Iterations for ADR loadstep.
`GetAutomaticMassScalingType`	Gets the AutomaticMassScalingType for a load step.
`SetAutomaticMassScalingType`	Sets the AutomaticMassScalingType for a load step.
`GetMassScalingMinTimeStep`	Gets the MassScalingMinTimeStep for a load step.
`SetMassScalingMinTimeStep`	Sets the MassScalingMinTimeStep for a load step.
`GetStaticDamping`	Gets the StaticDamping.
`SetStaticDamping`	Sets the StaticDamping.
`GetSaveResultsOnType`	Gets the Save Results Type for a load step.
`SetSaveResultsOnType`	Sets the Save Results Type for a load step.
`GetSaveResultsOnTime`	Gets the Time increment for Save Results On for a load step.
`SetSaveResultsOnTime`	Set the Time increment for Save Results On for a load step.
`GetSaveResultsOnTimeSteps`	Gets the Cycle increment for Save Results On for a load step.
`SetSaveResultsOnTimeSteps`	Sets the Cycle increment for Save Results On for a load step.
`GetSaveResultsOnPoints`	Gets the Points increment for Save Results On for a load step.
`SetSaveResultsOnPoints`	Set the Points increment for Save Results On for a load step.
`GetSaveRestartsOnType`	Gets the Save Restarts Type for a load step.
`SetSaveRestartsOnType`	Sets the Save Restarts Type for a load step.
`GetSaveRestartsOnTime`	Gets the Time increment for Save Restarts On for a load step.
`SetSaveRestartsOnTime`	Set the Time increment for Save Restarts On for a load step.
`GetSaveRestartsOnTimeSteps`	Gets the Cycle increment for Save Restarts On for a load step.
`SetSaveRestartsOnTimeSteps`	Set the Cycle increment for Save Restarts On for a load step.
`GetSaveRestartsOnPoints`	Gets the Points increment for Save Restarts On Points for a load step.
`SetSaveRestartsOnPoints`	Set the Points increment for Save Restarts On for a load step.
`GetSaveProbeDataOnType`	Gets the Save ProbeData Type for a load step.
`SetSaveProbeDataOnType`	Sets the Save ProbeData Type for a load step.
`GetSaveProbeDataOnTime`	Gets the Time increment for Save ProbeData On for a load step.
`SetSaveProbeDataOnTime`	Set the Time increment for Save ProbeData On for a load step.
`GetSaveProbeDataOnTimeSteps`	Gets the Cycle increment for Save ProbeData On for a load step.
`SetSaveProbeDataOnTimeSteps`	Set the Cycle increment for Save ProbeData On for a load step.
`DeleteAllRestartPoints`	DeleteAllRestartPoints method.
`GetChildren`	Gets the list of children, filtered by type.
`GetChildren`	Gets the list of children, filtered by type.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`Activate`	Activate the current object.
`CopyTo`	Copies all visible properties from this object to another.
`Duplicate`	Creates a copy of the current DataModelObject.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PropertyByName`	Get a property by its unique name.
`PropertyByAPIName`	Get a property by its API name.
`CreateParameter`	Creates a new parameter for a Property.
`GetParameter`	Gets the parameter corresponding to the given property.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.

Properties

`InternalObject`	Gets the Internal Object. For advanced usage only.
`PreferenceType`	Gets or sets the PreferenceType
`NumberOfSteps`	Gets or sets the NumberOfSteps.
`CurrentStepNumber`	Gets or sets the CurrentStepNumber.
`ResumeFromTimeStep`	Gets or sets the ResumeFromCycle.
`MaximumTimeSteps`	Gets or sets the MaximumNumberofCycles.
`MaximumEnergyError`	Gets or sets the MaximumEnergyError.
`ReferenceEnergyTimeStep`	Gets or sets the ReferenceEnergyCycle.
`InitialTimeStep`	Gets or sets the InitialTimeStep.
`MinimumTimeStep`	Gets or sets the MinimumTimeStep.
`MaximumTimeStep`	Gets or sets the MaximumTimeStep.
`TimeStepSafetyFactor`	Gets or sets the TimeStepSafetyFactor.
`CharZoneDimensionType`	Gets or sets the CharZoneDimensionType.
`StepawareMassScalingType`	Gets or Sets the Step aware Mass Scaling Controls.
`AutomaticMassScalingType`	Gets or sets the AutomaticMassScaling.
`MassScalingMinTimeStep`	Gets or sets the MassScalingMinTimeStep.
`MassScalingMaxElem`	Gets or sets the MassScalingMaxElem.
`MassScalingMaxPart`	Gets or sets the MassScalingMaxPart.
`MassScalingUpdateFreq`	Gets or sets the MassScalingUpdateFreq.
`SolverPrecisionType`	Gets or sets the SolverPrecisionType.
`SolveUnits`	Gets or sets the SolveUnits.
`BeamSolutionType`	Gets or sets the BeamSolutionType.
`BeamTimeStepSafetyFactor`	Gets or sets the BeamTimeStepSafetyFactor.
`HexIntegrationType`	Gets or sets the HexIntegrationType.
`ShellSublayers`	Gets or sets the ShellSublayers.
`ShellShearCorrectionFactor`	Gets or sets the ShellShearCorrectionFactor.
`ShellWarpCorrection`	Gets or sets the ShellWarpCorrection.
`ShellThicknessUpdateType`	Gets or sets the ShellThicknessUpdateType.
`PusoCoefficient`	Gets or sets the PusoCoefficient.
`TetPressureIntegrationType`	Gets or sets the TetIntegrationType.
`ShellInertiaUpdateType`	Gets or sets the ShellInertiaUpdateType.
`DensityUpdateType`	Gets or sets the DensityUpdateType.
`SphMinTimeStep`	Gets or sets the Minimum Timestep for SPH.
`SPHMinDensityFactor`	Gets or sets the Minimum Density Factor for SPH.
`SPHMaxDensityFactor`	Gets or sets the Maximum Density Factor for SPH.
`SPHNodeDensityCutoffOption`	Gets or sets the SPHNodeDensityCutoffOption.
`DetonationBurnType`	Gets or sets the DetonationBurnType.
`MinimumVelocity`	Gets or sets the MinimumVelocity.
`MaximumVelocity`	Gets or sets the MaximumVelocity.
`RadiusCutoff`	Gets or sets the RadiusCutoff.
`MinimumStrainCutOff`	Gets or sets the MinimumStrainCutOff.
`EulerSizeDefType`	Gets or sets the EulerSizeDefType.
`EulerDomainType`	Gets or sets the EulerDomainType.
`EulerDisplayBox`	Gets or sets the EulerDisplayBox.
`EulerDomScopeDefType`	Gets or sets the EulerDomScopeDefType.
`EulerXScaleFactor`	Gets or sets the EulerXScaleFactor.
`EulerYScaleFactor`	Gets or sets the EulerYScaleFactor.
`EulerZScaleFactor`	Gets or sets the EulerZScaleFactor.
`EulerXOrigin`	Gets or sets the EulerXOrigin.
`EulerYOrigin`	Gets or sets the EulerYOrigin.
`EulerZOrigin`	Gets or sets the EulerZOrigin.
`EulerXDim`	Gets or sets the EulerXDim.
`EulerYDim`	Gets or sets the EulerYDim.
`EulerZDim`	Gets or sets the EulerZDim.
`EulerResolutionDefType`	Gets or sets the EulerResolutionDefType.
`EulerGradedDefinition`	Gets or sets the EulerGradedDefinition.
`EulerGradeIncrement`	Gets or sets the EulerGradeIncrement.
`EulerGradeNumberOfTimes`	Gets or sets the EulerGradeNumberOfTimes.
`EulerCellSize`	Gets or sets the EulerCellSize.
`EulerTotalCells`	Gets or sets the EulerTotalCells.
`EulerXZones`	Gets or sets the EulerXZones.
`EulerYZones`	Gets or sets the EulerYZones.
`EulerZZones`	Gets or sets the EulerZZones.
`EulerBoundLowerX`	Gets or sets the EulerBoundLowerX.
`EulerBoundLowerY`	Gets or sets the EulerBoundLowerY.
`EulerBoundLowerZ`	Gets or sets the EulerBoundLowerZ.
`EulerBoundUpperX`	Gets or sets the EulerBoundUpperX.
`EulerBoundUpperY`	Gets or sets the EulerBoundUpperY.
`EulerBoundUpperZ`	Gets or sets the EulerBoundUpperZ.
`EulerTrackType`	Gets the EulerTrackType.
`EulerPropertyXmin`	Gets or sets the EulerPropertyXmin.
`EulerPropertyYmin`	Gets or sets the EulerPropertyYmin.
`EulerPropertyZmin`	Gets or sets the EulerPropertyZmin.
`EulerPropertyXsize`	Gets or sets the EulerPropertyXsize.
`EulerPropertyYsize`	Gets or sets the EulerPropertyYsize.
`EulerPropertyZsize`	Gets or sets the EulerPropertyZsize.
`EulerPropertyXres`	Gets or sets the EulerPropertyXres.
`EulerPropertyYres`	Gets or sets the EulerPropertyYres.
`EulerPropertyZres`	Gets or sets the EulerPropertyZres.
`EulerPropertyDisplayBox`	Gets or sets the EulerPropertyDisplayBox.
`LinearArtificialViscosity`	Gets or sets the LinearArtificialViscosity.
`QuadraticArtificialViscosity`	Gets or sets the QuadraticArtificialViscosity.
`LinearViscosityExpansionType`	Gets or sets the LinearViscosityExpansionType.
`ArtificialViscosityForShellsType`	Gets or sets the ArtificialViscosityForShellsType.
`LinearViscositySPH`	Gets or sets the Linear Artificial Viscosity for SPH.
`QuadratricViscositySPH`	Gets or sets the Quadratic Artificial Viscosity for SPH.
`HourglassDampingType`	Gets or sets the HourglassDampingType.
`StiffnessCoefficient`	Gets or sets the StiffnessCoefficient.
`ViscousCoefficient`	Gets or sets the ViscousCoefficient.
`ViscousCoefficientFB`	Gets or sets the ViscousCoefficientFB.
`ErosionOnGeomStrainType`	Gets or sets the ErosionOnGeomStrainType.
`ErosionGeomStrainLimit`	Gets or sets the ErosionGeomStrainLimit
`ErosionOnMaterialFailureType`	Gets or sets the ErosionOnMaterialFailureType
`ErosionOnMinElemTimestepType`	Gets or sets the ErosionOnMinElemTimestepType
`ErosionMinElemTimestep`	Gets or sets the ErosionMinElemTimestep
`ErosionRetainIntertiaType`	Gets or sets the ErosionRetainIntertiaType
`StepawareOutputControlsType`	Gets or Sets the Step aware Output Controls.
`OutputContactForcesOnType`	Gets or Sets OutputContactForces Increment Type.
`OutputContactForcesOnTime`	Gets or Sets the Time increment for OutputContactForcesOnTime.
`OutputContactForcesOnTimeSteps`	Gets or Sets the Cycle increment for OutputContactForcesOnTimeSteps.
`OutputContactForcesOnPoints`	Gets or Sets the Points increment for OutputContactForcesOnPoints.
`SavePrintSummaryOnType`	Gets or Sets SavePrintSummaryOnType.
`SavePrintSummaryOnTime`	Gets or Sets the Time increment for SavePrintSummaryOnTime.
`SavePrintSummaryOnTimeSteps`	Gets or Sets Cycle increment for SavePrintSummaryOnTimeSteps.
`OutputRemapFile`	Gets or Sets the Output Remap File Type.
`SaveUserEditOnType`	Gets or Sets SaveUserEditOnType.
`SaveUserEditOnTime`	Gets or Sets Time increment for SaveUserEditOnTime.
`SaveUserEditOnTimeSteps`	Gets or Sets Cycle increment for SaveUserEditOnTimeSteps.
`Graph`	Graph property.
`InternalObject`	Gets the internal object. For advanced usage only.
`ScratchSolverFilesDirectory`	Gets the ScratchSolverFilesDirectory.
`SolverFilesDirectory`	Gets the SolverFilesDirectory.
`DataModelObjectCategory`	Gets the current DataModelObject’s category.
`Children`	Gets the list of children.
`Comments`	Gets the list of associated comments.
`Figures`	Gets the list of associated figures.
`Images`	Gets the list of associated images.
`Properties`	Gets the list of properties for this object.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Property detail#

property EXDAnalysisSettings.InternalObject: System.Object | None: Gets the Internal Object. For advanced usage only.

property EXDAnalysisSettings.PreferenceType: Ansys.Mechanical.DataModel.Enums.EXDPreferenceType | None: Gets or sets the PreferenceType

property EXDAnalysisSettings.NumberOfSteps: System.Int32 | None: Gets or sets the NumberOfSteps.

property EXDAnalysisSettings.CurrentStepNumber: System.Int32 | None: Gets or sets the CurrentStepNumber.

property EXDAnalysisSettings.ResumeFromTimeStep: System.Int32 | None: Gets or sets the ResumeFromCycle.

property EXDAnalysisSettings.MaximumTimeSteps: System.Int32 | None: Gets or sets the MaximumNumberofCycles.

property EXDAnalysisSettings.MaximumEnergyError: System.Double | None: Gets or sets the MaximumEnergyError.

property EXDAnalysisSettings.ReferenceEnergyTimeStep: System.Int32 | None: Gets or sets the ReferenceEnergyCycle.

property EXDAnalysisSettings.InitialTimeStep: Ansys.Core.Units.Quantity | None: Gets or sets the InitialTimeStep.

property EXDAnalysisSettings.MinimumTimeStep: Ansys.Core.Units.Quantity | None: Gets or sets the MinimumTimeStep.

property EXDAnalysisSettings.MaximumTimeStep: Ansys.Core.Units.Quantity | None: Gets or sets the MaximumTimeStep.

property EXDAnalysisSettings.TimeStepSafetyFactor: System.Double | None: Gets or sets the TimeStepSafetyFactor.

property EXDAnalysisSettings.CharZoneDimensionType: Ansys.Mechanical.DataModel.Enums.EXDCharZoneDimensionType | None: Gets or sets the CharZoneDimensionType.

property EXDAnalysisSettings.StepawareMassScalingType: System.Boolean | None: Gets or Sets the Step aware Mass Scaling Controls.

property EXDAnalysisSettings.AutomaticMassScalingType: System.Boolean | None: Gets or sets the AutomaticMassScaling.

property EXDAnalysisSettings.MassScalingMinTimeStep: Ansys.Core.Units.Quantity | None: Gets or sets the MassScalingMinTimeStep.

property EXDAnalysisSettings.MassScalingMaxElem: System.Double | None: Gets or sets the MassScalingMaxElem.

property EXDAnalysisSettings.MassScalingMaxPart: System.Double | None: Gets or sets the MassScalingMaxPart.

property EXDAnalysisSettings.MassScalingUpdateFreq: System.Int32 | None: Gets or sets the MassScalingUpdateFreq.

property EXDAnalysisSettings.SolverPrecisionType: Ansys.Mechanical.DataModel.Enums.EXDSolverPrecisionType | None: Gets or sets the SolverPrecisionType.

property EXDAnalysisSettings.SolveUnits: Ansys.Mechanical.DataModel.Enums.EXDSolveUnitsType | None: Gets or sets the SolveUnits.

property EXDAnalysisSettings.BeamSolutionType: Ansys.Mechanical.DataModel.Enums.EXDBeamSolutionType | None: Gets or sets the BeamSolutionType.

property EXDAnalysisSettings.BeamTimeStepSafetyFactor: System.Double | None: Gets or sets the BeamTimeStepSafetyFactor.

property EXDAnalysisSettings.HexIntegrationType: Ansys.Mechanical.DataModel.Enums.EXDHexIntegrationType | None: Gets or sets the HexIntegrationType.

property EXDAnalysisSettings.ShellSublayers: System.Int32 | None: Gets or sets the ShellSublayers.

property EXDAnalysisSettings.ShellShearCorrectionFactor: System.Double | None: Gets or sets the ShellShearCorrectionFactor.

property EXDAnalysisSettings.ShellWarpCorrection: System.Boolean | None: Gets or sets the ShellWarpCorrection.

property EXDAnalysisSettings.ShellThicknessUpdateType: Ansys.Mechanical.DataModel.Enums.EXDShellThicknessUpdateType | None: Gets or sets the ShellThicknessUpdateType.

property EXDAnalysisSettings.PusoCoefficient: System.Double | None: Gets or sets the PusoCoefficient.

property EXDAnalysisSettings.TetPressureIntegrationType: Ansys.Mechanical.DataModel.Enums.EXDTetPressureIntegrationType | None: Gets or sets the TetIntegrationType.

property EXDAnalysisSettings.ShellInertiaUpdateType: Ansys.Mechanical.DataModel.Enums.EXDShellInertiaUpdateType | None: Gets or sets the ShellInertiaUpdateType.

property EXDAnalysisSettings.DensityUpdateType: Ansys.Mechanical.DataModel.Enums.EXDDensityUpdateType | None: Gets or sets the DensityUpdateType.

property EXDAnalysisSettings.SphMinTimeStep: Ansys.Core.Units.Quantity | None: Gets or sets the Minimum Timestep for SPH.

property EXDAnalysisSettings.SPHMinDensityFactor: System.Double | None: Gets or sets the Minimum Density Factor for SPH.

property EXDAnalysisSettings.SPHMaxDensityFactor: System.Double | None: Gets or sets the Maximum Density Factor for SPH.

property EXDAnalysisSettings.SPHNodeDensityCutoffOption: Ansys.Mechanical.DataModel.Enums.EXDSPHNodeDensityCutoffOption | None: Gets or sets the SPHNodeDensityCutoffOption.

property EXDAnalysisSettings.DetonationBurnType: Ansys.Mechanical.DataModel.Enums.EXDDetonationBurnType | None: Gets or sets the DetonationBurnType.

property EXDAnalysisSettings.MinimumVelocity: Ansys.Core.Units.Quantity | None: Gets or sets the MinimumVelocity.

property EXDAnalysisSettings.MaximumVelocity: Ansys.Core.Units.Quantity | None: Gets or sets the MaximumVelocity.

property EXDAnalysisSettings.RadiusCutoff: System.Double | None: Gets or sets the RadiusCutoff.

property EXDAnalysisSettings.MinimumStrainCutOff: System.Double | None: Gets or sets the MinimumStrainCutOff.

property EXDAnalysisSettings.EulerSizeDefType: Ansys.Mechanical.DataModel.Enums.EXDEulerSizeDefType | None: Gets or sets the EulerSizeDefType.

property EXDAnalysisSettings.EulerDomainType: Ansys.Mechanical.DataModel.Enums.EXDEulerDomainType | None: Gets or sets the EulerDomainType.

property EXDAnalysisSettings.EulerDisplayBox: System.Boolean | None: Gets or sets the EulerDisplayBox.

property EXDAnalysisSettings.EulerDomScopeDefType: Ansys.Mechanical.DataModel.Enums.EXDEulerDomScopeDefType | None: Gets or sets the EulerDomScopeDefType.

property EXDAnalysisSettings.EulerXScaleFactor: System.Double | None: Gets or sets the EulerXScaleFactor.

property EXDAnalysisSettings.EulerYScaleFactor: System.Double | None: Gets or sets the EulerYScaleFactor.

property EXDAnalysisSettings.EulerZScaleFactor: System.Double | None: Gets or sets the EulerZScaleFactor.

property EXDAnalysisSettings.EulerXOrigin: Ansys.Core.Units.Quantity | None: Gets or sets the EulerXOrigin.

property EXDAnalysisSettings.EulerYOrigin: Ansys.Core.Units.Quantity | None: Gets or sets the EulerYOrigin.

property EXDAnalysisSettings.EulerZOrigin: Ansys.Core.Units.Quantity | None: Gets or sets the EulerZOrigin.

property EXDAnalysisSettings.EulerXDim: Ansys.Core.Units.Quantity | None: Gets or sets the EulerXDim.

property EXDAnalysisSettings.EulerYDim: Ansys.Core.Units.Quantity | None: Gets or sets the EulerYDim.

property EXDAnalysisSettings.EulerZDim: Ansys.Core.Units.Quantity | None: Gets or sets the EulerZDim.

property EXDAnalysisSettings.EulerResolutionDefType: Ansys.Mechanical.DataModel.Enums.EXDEulerResolutionDefType | None: Gets or sets the EulerResolutionDefType.

property EXDAnalysisSettings.EulerGradedDefinition: Ansys.Mechanical.DataModel.Enums.EXDEulerGradedDefinition | None: Gets or sets the EulerGradedDefinition.

property EXDAnalysisSettings.EulerGradeIncrement: Ansys.Core.Units.Quantity | None: Gets or sets the EulerGradeIncrement.

property EXDAnalysisSettings.EulerGradeNumberOfTimes: System.Int32 | None: Gets or sets the EulerGradeNumberOfTimes.

property EXDAnalysisSettings.EulerCellSize: Ansys.Core.Units.Quantity | None: Gets or sets the EulerCellSize.

property EXDAnalysisSettings.EulerTotalCells: System.Int32 | None: Gets or sets the EulerTotalCells.

property EXDAnalysisSettings.EulerXZones: System.Int32 | None: Gets or sets the EulerXZones.

property EXDAnalysisSettings.EulerYZones: System.Int32 | None: Gets or sets the EulerYZones.

property EXDAnalysisSettings.EulerZZones: System.Int32 | None: Gets or sets the EulerZZones.

property EXDAnalysisSettings.EulerBoundLowerX: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None: Gets or sets the EulerBoundLowerX.

property EXDAnalysisSettings.EulerBoundLowerY: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None: Gets or sets the EulerBoundLowerY.

property EXDAnalysisSettings.EulerBoundLowerZ: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None: Gets or sets the EulerBoundLowerZ.

property EXDAnalysisSettings.EulerBoundUpperX: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None: Gets or sets the EulerBoundUpperX.

property EXDAnalysisSettings.EulerBoundUpperY: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None: Gets or sets the EulerBoundUpperY.

property EXDAnalysisSettings.EulerBoundUpperZ: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None: Gets or sets the EulerBoundUpperZ.

property EXDAnalysisSettings.EulerTrackType: Ansys.Mechanical.DataModel.Enums.EXDEulerTrackType | None: Gets the EulerTrackType.

property EXDAnalysisSettings.EulerPropertyXmin: Ansys.Core.Units.Quantity | None: Gets or sets the EulerPropertyXmin.

property EXDAnalysisSettings.EulerPropertyYmin: Ansys.Core.Units.Quantity | None: Gets or sets the EulerPropertyYmin.

property EXDAnalysisSettings.EulerPropertyZmin: Ansys.Core.Units.Quantity | None: Gets or sets the EulerPropertyZmin.

property EXDAnalysisSettings.EulerPropertyXsize: Ansys.Core.Units.Quantity | None: Gets or sets the EulerPropertyXsize.

property EXDAnalysisSettings.EulerPropertyYsize: Ansys.Core.Units.Quantity | None: Gets or sets the EulerPropertyYsize.

property EXDAnalysisSettings.EulerPropertyZsize: Ansys.Core.Units.Quantity | None: Gets or sets the EulerPropertyZsize.

property EXDAnalysisSettings.EulerPropertyXres: System.Int32 | None: Gets or sets the EulerPropertyXres.

property EXDAnalysisSettings.EulerPropertyYres: System.Int32 | None: Gets or sets the EulerPropertyYres.

property EXDAnalysisSettings.EulerPropertyZres: System.Int32 | None: Gets or sets the EulerPropertyZres.

property EXDAnalysisSettings.EulerPropertyDisplayBox: System.Boolean | None: Gets or sets the EulerPropertyDisplayBox.

property EXDAnalysisSettings.LinearArtificialViscosity: System.Double | None: Gets or sets the LinearArtificialViscosity.

property EXDAnalysisSettings.QuadraticArtificialViscosity: System.Double | None: Gets or sets the QuadraticArtificialViscosity.

property EXDAnalysisSettings.LinearViscosityExpansionType: System.Boolean | None: Gets or sets the LinearViscosityExpansionType.

property EXDAnalysisSettings.ArtificialViscosityForShellsType: System.Boolean | None: Gets or sets the ArtificialViscosityForShellsType.

property EXDAnalysisSettings.LinearViscositySPH: System.Double | None: Gets or sets the Linear Artificial Viscosity for SPH.

property EXDAnalysisSettings.QuadratricViscositySPH: System.Double | None: Gets or sets the Quadratic Artificial Viscosity for SPH.

property EXDAnalysisSettings.HourglassDampingType: Ansys.Mechanical.DataModel.Enums.EXDHourglassDampingType | None: Gets or sets the HourglassDampingType.

property EXDAnalysisSettings.StiffnessCoefficient: System.Double | None: Gets or sets the StiffnessCoefficient.

property EXDAnalysisSettings.ViscousCoefficient: System.Double | None: Gets or sets the ViscousCoefficient.

property EXDAnalysisSettings.ViscousCoefficientFB: System.Double | None: Gets or sets the ViscousCoefficientFB.

property EXDAnalysisSettings.ErosionOnGeomStrainType: System.Boolean | None: Gets or sets the ErosionOnGeomStrainType.

property EXDAnalysisSettings.ErosionGeomStrainLimit: System.Double | None: Gets or sets the ErosionGeomStrainLimit

property EXDAnalysisSettings.ErosionOnMaterialFailureType: System.Boolean | None: Gets or sets the ErosionOnMaterialFailureType

property EXDAnalysisSettings.ErosionOnMinElemTimestepType: System.Boolean | None: Gets or sets the ErosionOnMinElemTimestepType

property EXDAnalysisSettings.ErosionMinElemTimestep: Ansys.Core.Units.Quantity | None: Gets or sets the ErosionMinElemTimestep

property EXDAnalysisSettings.ErosionRetainIntertiaType: System.Boolean | None: Gets or sets the ErosionRetainIntertiaType

property EXDAnalysisSettings.StepawareOutputControlsType: System.Boolean | None: Gets or Sets the Step aware Output Controls.

property EXDAnalysisSettings.OutputContactForcesOnType: Ansys.Mechanical.DataModel.Enums.EXDOutputContactForcesOnType | None: Gets or Sets OutputContactForces Increment Type.

property EXDAnalysisSettings.OutputContactForcesOnTime: Ansys.Core.Units.Quantity | None: Gets or Sets the Time increment for OutputContactForcesOnTime.

property EXDAnalysisSettings.OutputContactForcesOnTimeSteps: System.Int32 | None: Gets or Sets the Cycle increment for OutputContactForcesOnTimeSteps.

property EXDAnalysisSettings.OutputContactForcesOnPoints: System.Int32 | None: Gets or Sets the Points increment for OutputContactForcesOnPoints.

property EXDAnalysisSettings.SavePrintSummaryOnType: Ansys.Mechanical.DataModel.Enums.EXDSavePrintSummaryOnType | None: Gets or Sets SavePrintSummaryOnType.

property EXDAnalysisSettings.SavePrintSummaryOnTime: Ansys.Core.Units.Quantity | None: Gets or Sets the Time increment for SavePrintSummaryOnTime.

property EXDAnalysisSettings.SavePrintSummaryOnTimeSteps: System.Int32 | None: Gets or Sets Cycle increment for SavePrintSummaryOnTimeSteps.

property EXDAnalysisSettings.OutputRemapFile: Ansys.Mechanical.DataModel.Enums.EXDOutputRemapFileOnType | None: Gets or Sets the Output Remap File Type.

property EXDAnalysisSettings.SaveUserEditOnType: Ansys.Mechanical.DataModel.Enums.EXDSaveUserEditOnType | None: Gets or Sets SaveUserEditOnType.

property EXDAnalysisSettings.SaveUserEditOnTime: Ansys.Core.Units.Quantity | None: Gets or Sets Time increment for SaveUserEditOnTime.

property EXDAnalysisSettings.SaveUserEditOnTimeSteps: System.Int32 | None: Gets or Sets Cycle increment for SaveUserEditOnTimeSteps.

property EXDAnalysisSettings.Graph: Ansys.Mechanical.Graphics.AnalysisSettingsGraph | None: Graph property.

property EXDAnalysisSettings.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSAnalysisSettings | None: Gets the internal object. For advanced usage only.

property EXDAnalysisSettings.ScratchSolverFilesDirectory: System.String | None: Gets the ScratchSolverFilesDirectory.

property EXDAnalysisSettings.SolverFilesDirectory: System.String | None: Gets the SolverFilesDirectory.

property EXDAnalysisSettings.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None: Gets the current DataModelObject’s category.

property EXDAnalysisSettings.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets the list of children.

property EXDAnalysisSettings.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None: Gets the list of associated comments.

property EXDAnalysisSettings.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None: Gets the list of associated figures.

property EXDAnalysisSettings.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None: Gets the list of associated images.

property EXDAnalysisSettings.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties for this object.

property EXDAnalysisSettings.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties that are visible for this object.

Method detail#

EXDAnalysisSettings.GetStepEndTime(stepNumber: System.Int32) → Ansys.Core.Units.Quantity: Gets the Step End Time at a given solution step.

EXDAnalysisSettings.SetStepEndTime(stepNumber: System.Int32, value: Ansys.Core.Units.Quantity) → System.Void: Sets the Step End Time for a given solution step.

EXDAnalysisSettings.GetLoadStepType(stepNumber: System.Int32) → Ansys.Mechanical.DataModel.Enums.EXDLoadStepType: Gets the LoadStepType for a step.

EXDAnalysisSettings.SetLoadStepType(stepNumber: System.Int32, value: Ansys.Mechanical.DataModel.Enums.EXDLoadStepType) → System.Void: Sets the LoadStepType for a step.

EXDAnalysisSettings.getADRConvergenceMethod(stepNumber: System.Int32) → Ansys.Mechanical.DataModel.Enums.EXDADRConvergenceMethod: Gets the Covergence Method for ADR loadstep.

EXDAnalysisSettings.setADRConvergenceMethod(stepNumber: System.Int32, value: Ansys.Mechanical.DataModel.Enums.EXDADRConvergenceMethod) → System.Void: Sets the Covergence Method for ADR loadstep.

EXDAnalysisSettings.getADRConvergenceTolerance(stepNumber: System.Int32) → System.Object: Gets the Covergence Tolerance for ADR loadstep.

EXDAnalysisSettings.setADRConvergenceTolerance(stepNumber: System.Int32, value: System.Double) → System.Void: Sets the Covergence Tolerance for ADR loadstep.

EXDAnalysisSettings.getADRMaximumIterations(stepNumber: System.Int32) → System.Object: Gets the Maximum Iterations for ADR loadstep.

EXDAnalysisSettings.setADRMaximumIterations(stepNumber: System.Int32, value: System.Int32) → System.Void: Sets the Maximum Iterations for ADR loadstep.

EXDAnalysisSettings.GetAutomaticMassScalingType(stepNumber: System.Int32) → System.Boolean: Gets the AutomaticMassScalingType for a load step.

EXDAnalysisSettings.SetAutomaticMassScalingType(stepNumber: System.Int32, value: Ansys.Mechanical.DataModel.Enums.EXDAutomaticMassScalingType) → System.Void: Sets the AutomaticMassScalingType for a load step.

EXDAnalysisSettings.GetMassScalingMinTimeStep(stepNumber: System.Int32) → Ansys.Core.Units.Quantity: Gets the MassScalingMinTimeStep for a load step.

EXDAnalysisSettings.SetMassScalingMinTimeStep(stepNumber: System.Int32, value: Ansys.Core.Units.Quantity) → System.Void: Sets the MassScalingMinTimeStep for a load step.

EXDAnalysisSettings.GetStaticDamping(stepNumber: System.Int32) → System.Object: Gets the StaticDamping.

EXDAnalysisSettings.SetStaticDamping(stepNumber: System.Int32, value: System.Double) → System.Void: Sets the StaticDamping.

EXDAnalysisSettings.GetSaveResultsOnType(stepNumber: System.Int32) → Ansys.Mechanical.DataModel.Enums.EXDSaveResultsOnType: Gets the Save Results Type for a load step.

EXDAnalysisSettings.SetSaveResultsOnType(stepNumber: System.Int32, value: Ansys.Mechanical.DataModel.Enums.EXDSaveResultsOnType) → System.Void: Sets the Save Results Type for a load step.

EXDAnalysisSettings.GetSaveResultsOnTime(stepNumber: System.Int32) → Ansys.Core.Units.Quantity: Gets the Time increment for Save Results On for a load step.

EXDAnalysisSettings.SetSaveResultsOnTime(stepNumber: System.Int32, value: Ansys.Core.Units.Quantity) → System.Void: Set the Time increment for Save Results On for a load step.

EXDAnalysisSettings.GetSaveResultsOnTimeSteps(stepNumber: System.Int32) → System.Int32: Gets the Cycle increment for Save Results On for a load step.

EXDAnalysisSettings.SetSaveResultsOnTimeSteps(stepNumber: System.Int32, value: System.Int32) → System.Void: Sets the Cycle increment for Save Results On for a load step.

EXDAnalysisSettings.GetSaveResultsOnPoints(stepNumber: System.Int32) → System.Int32: Gets the Points increment for Save Results On for a load step.

EXDAnalysisSettings.SetSaveResultsOnPoints(stepNumber: System.Int32, value: System.Int32) → System.Void: Set the Points increment for Save Results On for a load step.

EXDAnalysisSettings.GetSaveRestartsOnType(stepNumber: System.Int32) → Ansys.Mechanical.DataModel.Enums.EXDSaveRestartsOnType: Gets the Save Restarts Type for a load step.

EXDAnalysisSettings.SetSaveRestartsOnType(stepNumber: System.Int32, value: Ansys.Mechanical.DataModel.Enums.EXDSaveRestartsOnType) → System.Void: Sets the Save Restarts Type for a load step.

EXDAnalysisSettings.GetSaveRestartsOnTime(stepNumber: System.Int32) → Ansys.Core.Units.Quantity: Gets the Time increment for Save Restarts On for a load step.

EXDAnalysisSettings.SetSaveRestartsOnTime(stepNumber: System.Int32, value: Ansys.Core.Units.Quantity) → System.Void: Set the Time increment for Save Restarts On for a load step.

EXDAnalysisSettings.GetSaveRestartsOnTimeSteps(stepNumber: System.Int32) → System.Int32: Gets the Cycle increment for Save Restarts On for a load step.

EXDAnalysisSettings.SetSaveRestartsOnTimeSteps(stepNumber: System.Int32, value: System.Int32) → System.Void: Set the Cycle increment for Save Restarts On for a load step.

EXDAnalysisSettings.GetSaveRestartsOnPoints(stepNumber: System.Int32) → System.Int32: Gets the Points increment for Save Restarts On Points for a load step.

EXDAnalysisSettings.SetSaveRestartsOnPoints(stepNumber: System.Int32, value: System.Int32) → System.Void: Set the Points increment for Save Restarts On for a load step.

EXDAnalysisSettings.GetSaveProbeDataOnType(stepNumber: System.Int32) → Ansys.Mechanical.DataModel.Enums.EXDSaveProbeDataOnType: Gets the Save ProbeData Type for a load step.

EXDAnalysisSettings.SetSaveProbeDataOnType(stepNumber: System.Int32, value: Ansys.Mechanical.DataModel.Enums.EXDSaveProbeDataOnType) → System.Void: Sets the Save ProbeData Type for a load step.

EXDAnalysisSettings.GetSaveProbeDataOnTime(stepNumber: System.Int32) → Ansys.Core.Units.Quantity: Gets the Time increment for Save ProbeData On for a load step.

EXDAnalysisSettings.SetSaveProbeDataOnTime(stepNumber: System.Int32, value: Ansys.Core.Units.Quantity) → System.Void: Set the Time increment for Save ProbeData On for a load step.

EXDAnalysisSettings.GetSaveProbeDataOnTimeSteps(stepNumber: System.Int32) → System.Int32: Gets the Cycle increment for Save ProbeData On for a load step.

EXDAnalysisSettings.SetSaveProbeDataOnTimeSteps(stepNumber: System.Int32, value: System.Int32) → System.Void: Set the Cycle increment for Save ProbeData On for a load step.

EXDAnalysisSettings.DeleteAllRestartPoints() → System.Void: DeleteAllRestartPoints method.

EXDAnalysisSettings.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]: Gets the list of children, filtered by type.

EXDAnalysisSettings.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Gets the list of children, filtered by type.

EXDAnalysisSettings.AddComment() → Ansys.ACT.Automation.Mechanical.Comment: Creates a new child Comment.

EXDAnalysisSettings.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure: Creates a new child Figure.

EXDAnalysisSettings.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

EXDAnalysisSettings.Activate() → System.Void: Activate the current object.

EXDAnalysisSettings.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void: Copies all visible properties from this object to another.

EXDAnalysisSettings.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Creates a copy of the current DataModelObject.

EXDAnalysisSettings.GroupAllSimilarChildren() → System.Void: Run the GroupAllSimilarChildren action.

EXDAnalysisSettings.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder: Run the GroupSimilarObjects action.

EXDAnalysisSettings.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property: Get a property by its unique name.

EXDAnalysisSettings.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

EXDAnalysisSettings.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Creates a new parameter for a Property.

EXDAnalysisSettings.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Gets the parameter corresponding to the given property.

EXDAnalysisSettings.RemoveParameter(propName: System.String) → System.Void: Removes the parameter from the parameter set corresponding to the given property.