AutomaticMethod#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod#

Bases: object

Defines a AutomaticMethod.

Overview#

Activate

Activate the current object.

AddComment

Creates a new child Comment.

AddFigure

Creates a new child Figure.

AddImage

Creates a new child Image.

CopyTo

Copies all visible properties from this object to another.

CreateParameter

Creates a new parameter for a Property.

Delete

Run the Delete action.

Duplicate

Creates a copy of the current DataModelObject.

GenerateMesh

Generate the Mesh.

GetChildren

Gets the list of children, filtered by type.

GetParameter

Gets the parameter corresponding to the given property.

GroupAllSimilarChildren

Run the GroupAllSimilarChildren action.

GroupSimilarObjects

Run the GroupSimilarObjects action.

PropertyByAPIName

Get a property by its API name.

PropertyByName

Get a property by its unique name.

RemoveParameter

Removes the parameter from the parameter set corresponding to the given property.

RenameBasedOnDefinition

Run the RenameBasedOnDefinition action.

Active

Gets the Active.

AggressiveInflateOption

Gets or sets the AggressiveInflateOption.

AggressiveTetImprovement

Gets or sets the AggressiveTetImprovement.

Algorithm

Gets or sets the Algorithm.

ApproximativeNumberOfElementsPerPart

Gets or sets the ApproximativeNumberOfElementsPerPart.

AutoCollapseShortEdges

Gets or sets the AutoCollapseShortEdges.

AutoPinchFaces

Gets or sets the AutoPinchFaces.

AutoPinchTolerance

Gets or sets the AutoPinchTolerance.

AutoRemoveThinFaces

Gets or sets the AutoRemoveThinFaces.

AutoRepairFeatureAngle

Gets or sets the AutoRepairFeatureAngle.

AutoRepairPartialDefeature

Gets or sets the AutoRepairPartialDefeature.

AutoSharpAngle

Gets or sets the AutoSharpAngle.

AutoShortEdgeLength

Gets or sets the AutoShortEdgeLength.

AutoThinFaceWidth

Gets or sets the AutoThinFaceWidth.

AutomaticNodeMovement

Gets or sets the AutomaticNodeMovement method under PCTet.

BFCartSubType

Gets the BFCartSubType.

BFCartTolerance

Gets the BFCartTolerance.

BodyStackingType

Gets or sets the BodyStackingType.

CartSweepSpacingOption

Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points).

CartesianSize

Gets or sets the CartesianSize in Multizone.

Children

Gets the list of children.

Clearence

Gets or sets the Clearence.

Comments

Gets the list of associated comments.

ConstrainBoundary

Gets or sets the ConstrainBoundary.

ControlMessages

Gets the ControlMessages.

CoordinateSystem

Gets or sets the CoordinateSystem.

CornerAngle

Gets or sets the CornerAngle.

CurvatureNormalAngle

Gets or sets the CurvatureNormalAngle.

DataModelObjectCategory

Gets the current DataModelObject's category.

DecompositionType

Gets or sets the DecompositionType in Multizone.

DefeatureLayerVolume

Gets or sets the DefeatureLayerVolume.

DefeaturingTolerance

Gets or sets the DefeaturingTolerance.

DefinedBy

Gets or sets the DefinedBy.

ElementMidsideNodes

Gets or sets the ElementMidsideNodes.

ElementOption

Gets or sets the ElementOption.

ElementOrder

Gets or sets the ElementOrder.

FaceProximityGapFactor

Gets or sets the FaceProximityGapFactor for PCTet.

FallBackMeshType

Gets or sets the FallBackMeshType.

FeatureAngle

Gets or sets the FeatureAngle.

FeatureProtectionAngle

Gets or sets the DihedralAngle for AutoNodeMove under PCTet.

Figures

Gets the list of associated figures.

FilletCollapse

Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ).

FillingDirection

Gets or sets the FillingDirection.

FillingFraction

Gets or sets the FillingFraction.

FreeFaceMeshType

Gets or sets the FreeFaceMeshType.

FreeMeshType

Gets or sets the FreeMeshType.

GenerateLayersUsingFacets

Gets or sets the GenerateLayersUsingFacets.

Images

Gets the list of associated images.

ImprovementIterations

Gets or sets the ImprovementIterations for AutoNodeMove under PCTet.

InflateRelativeTolerance

Gets or sets the InflateRelativeTolerance.

InternalObject

Gets the internal object. For advanced usage only.

KeyPointsSelection

Gets or sets the KeyPointsSelection.

KeyPointsTolerance

Gets or sets the KeyPoints Tolerance in Multizone.

LateralDefeatureSize

Gets or sets the LateralDefeatureSize.

LayerHeight

Gets or sets the LayerHeight.

LayerStart

Gets or sets the LayerStart.

Location

Gets or sets the Location.

MZSweepNumberDivisions

MappedSweptType

Gets or sets the MappedSweptType.

MatchMeshWherePossible

Gets or sets the MatchMeshWherePossible.

MaximumElementSize

Gets or sets the MaximumElementSize.

MeshBasedDefeaturing

Gets or sets the MeshBasedDefeaturing.

MeshFlowControl

Gets or sets the MeshFlowControl.

MeshInCenter

Gets or sets the MeshInCenter.

MeshType

Gets or sets the MeshType.

MeshUsingVoxelization

Gets or sets the MeshUsingVoxelization.

Method

Gets or sets the Method.

MinimumEdgeLength

Gets the MinimumEdgeLength.

MinimumSizeLimit

Gets or sets the MinimumSizeLimit.

MinimumThickness

Gets or sets the MinimumThickness for PCTet.

NamedSelection

Gets or sets the NamedSelection.

NumberOfCellsAcrossGap

Gets or sets the NumberOfCellsAcrossGap.

NumberOfElementLayers

Gets or sets the NumberOfElementLayers for PCTet.

OverlappingAngle

Gets or sets the OverlappingAngle.

PartialFill

Gets or sets the PartialFill.

ParticleCoordinateSystem

Gets or sets the ParticleCoordinateSystem.

ParticleDiameter

Gets or sets the ParticleDiameter.

PreserveBoundaries

Gets or sets the PreserveBoundaries.

PrimeMethodAutoRepair

Gets or sets the PrimeMethodAutoRepair.

ProjectCornersToTop

Gets or sets the ProjectCornersToTop.

ProjectInConstantZPlane

Gets or sets the ProjectInConstantZPlane.

ProjectionFactor

Gets or sets the ProjectionFactor.

Properties

Gets the list of properties for this object.

RadialGrowthRate

Gets or sets the RadialGrowthRate.

RefineAtThinSection

Gets or sets the RefineAtThinSection for PCTet.

RefineSurfaceMesh

Gets or sets the RefineSurfaceMesh for PCTet.

Refinement

Gets or sets the Refinement.

RelativeTolerance

Gets or sets the PrimeRelativeTolerance.

RemoveSharpAngleFaces

Gets or sets the RemoveSharpAngleFaces.

RepairFacets

Gets or sets the RepairFacets.

RestrictNodeMovementsToSurface

Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet.

ReuseBlocking

Gets or sets the ReuseBlocking.

ScopingMethod

Gets or sets the ScopingMethod.

ShowAdvancedImproveOptions

Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet.

SlicerFeatureAngle

Gets or sets the SlicerFeatureAngle.

SliverTriangleHeight

Gets or sets the SliverTriangleHeight.

SmoothMeshSpacing

Gets or sets the SmoothMeshSpacing in Multizone.

SmoothTransition

Gets or sets the SmoothTransition.

SolidShellElementForStacker

Gets or sets the SolidShellElementForStacker.

SolidShellElementForStackerGeometrySelection

Gets or sets the SolidShellElementForStackerGeometrySelection.

SolidShellElementForStackerNamedSelection

Gets or sets the SolidShellElementForStackerNamedSelection.

SolidShellElementForStackerScopingMethod

Gets or sets the SolidShellElementForStackerScopingMethod.

SourceLocation

Gets or sets the SourceLocation.

SourceTargetSelection

Gets or sets the SourceTargetSelection.

SpacingOption

Gets or sets the SpacingOption.

SplitAngle

Gets or sets the SplitAngle in Multizone.

StackerCoordinateSystem

Gets or sets the StackerCoordinateSystem.

StackerFreeFaceMeshType

Gets or sets the StackerFreeFaceMeshType.

StackerTriangleReduction

Gets or sets the StackerTriangleReduction.

StackingAxis

Gets or sets the StackingAxis.

StackingDefeatureSize

Gets or sets the StackingDefeatureSize.

StretchFactorX

Gets or sets the StretchFactorX.

StretchFactorY

Gets or sets the StretchFactorY.

StretchFactorZ

Gets or sets the StretchFactorZ.

SubsampleRate

Gets or sets the SubsampleRate.

Suppressed

Gets or sets the Suppressed.

SurfaceMeshMethod

Gets or sets the SurfaceMeshMethod.

SweepBiasType

Gets or sets the SweepBiasType.

SweepBiasValue

Gets or sets the SweepBiasValue.

SweepESizeType

Gets or sets the SweepESizeType.

SweepEdges

Gets or sets the SweepEdges.

SweepElementSize

Gets or sets the SweepElementSize.

SweepNumberDivisions

Gets or sets the SweepNumberDivisions.

SweepSizeBehavior

Gets or sets the SweepSizeBehavior.

SweepThickness

Gets or sets the SweepThickness in Multizone.

TargetLocation

Gets or sets the TargetLocation.

TetraGrowthRate

Gets or sets the TetraGrowthRate.

TriangleReduction

Gets or sets the TriangleReduction.

UseSplitAngle

Gets or sets the UseSplitAngle in Multizone.

VisibleProperties

Gets the list of properties that are visible for this object.

WallThickness

Gets or sets the WallThickness.

WriteICEMCFDFiles

Gets or sets the WriteICEMCFDFiles.

Property detail#

property AutomaticMethod.Active: bool | None#

Gets the Active.

property AutomaticMethod.AggressiveInflateOption: bool | None#

Gets or sets the AggressiveInflateOption.

property AutomaticMethod.AggressiveTetImprovement: bool | None#

Gets or sets the AggressiveTetImprovement.

property AutomaticMethod.Algorithm: Ansys.Mechanical.DataModel.Enums.MeshMethodAlgorithm | None#

Gets or sets the Algorithm.

property AutomaticMethod.ApproximativeNumberOfElementsPerPart: int | None#

Gets or sets the ApproximativeNumberOfElementsPerPart.

property AutomaticMethod.AutoCollapseShortEdges: Ansys.Mechanical.DataModel.Enums.YesNoType | None#

Gets or sets the AutoCollapseShortEdges.

property AutomaticMethod.AutoPinchFaces: Ansys.Mechanical.DataModel.Enums.YesNoType | None#

Gets or sets the AutoPinchFaces.

property AutomaticMethod.AutoPinchTolerance: Ansys.Core.Units.Quantity | None#

Gets or sets the AutoPinchTolerance.

property AutomaticMethod.AutoRemoveThinFaces: Ansys.Mechanical.DataModel.Enums.YesNoType | None#

Gets or sets the AutoRemoveThinFaces.

property AutomaticMethod.AutoRepairFeatureAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the AutoRepairFeatureAngle.

property AutomaticMethod.AutoRepairPartialDefeature: Ansys.Mechanical.DataModel.Enums.YesNoType | None#

Gets or sets the AutoRepairPartialDefeature.

property AutomaticMethod.AutoSharpAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the AutoSharpAngle.

property AutomaticMethod.AutoShortEdgeLength: Ansys.Core.Units.Quantity | None#

Gets or sets the AutoShortEdgeLength.

property AutomaticMethod.AutoThinFaceWidth: Ansys.Core.Units.Quantity | None#

Gets or sets the AutoThinFaceWidth.

property AutomaticMethod.AutomaticNodeMovement: Ansys.Mechanical.DataModel.Enums.AutomaticNodeMovementMethod | None#

Gets or sets the AutomaticNodeMovement method under PCTet.

property AutomaticMethod.BFCartSubType: int | None#

Gets the BFCartSubType.

property AutomaticMethod.BFCartTolerance: Ansys.Core.Units.Quantity | None#

Gets the BFCartTolerance.

property AutomaticMethod.BodyStackingType: Ansys.Mechanical.DataModel.Enums.BodyStackingType | None#

Gets or sets the BodyStackingType.

property AutomaticMethod.CartSweepSpacingOption: int | None#

Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points).

property AutomaticMethod.CartesianSize: Ansys.Core.Units.Quantity | None#

Gets or sets the CartesianSize in Multizone.

property AutomaticMethod.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets the list of children.

property AutomaticMethod.Clearence: Ansys.Core.Units.Quantity | None#

Gets or sets the Clearence.

property AutomaticMethod.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#

Gets the list of associated comments.

property AutomaticMethod.ConstrainBoundary: bool | None#

Gets or sets the ConstrainBoundary.

property AutomaticMethod.ControlMessages: bool | None#

Gets the ControlMessages.

property AutomaticMethod.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the CoordinateSystem.

property AutomaticMethod.CornerAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the CornerAngle.

property AutomaticMethod.CurvatureNormalAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the CurvatureNormalAngle.

property AutomaticMethod.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#

Gets the current DataModelObject's category.

property AutomaticMethod.DecompositionType: Ansys.Mechanical.DataModel.Enums.DecompositionType | None#

Gets or sets the DecompositionType in Multizone.

property AutomaticMethod.DefeatureLayerVolume: float | None#

Gets or sets the DefeatureLayerVolume.

property AutomaticMethod.DefeaturingTolerance: Ansys.Core.Units.Quantity | None#

Gets or sets the DefeaturingTolerance.

property AutomaticMethod.DefinedBy: Ansys.Mechanical.DataModel.Enums.PatchIndependentDefineType | None#

Gets or sets the DefinedBy.

property AutomaticMethod.ElementMidsideNodes: Ansys.Mechanical.DataModel.Enums.ElementMidsideNodesType | None#

Gets or sets the ElementMidsideNodes.

property AutomaticMethod.ElementOption: Ansys.Mechanical.DataModel.Enums.SweepElementOptionType | None#

Gets or sets the ElementOption.

property AutomaticMethod.ElementOrder: Ansys.Mechanical.DataModel.Enums.ElementOrder | None#

Gets or sets the ElementOrder.

property AutomaticMethod.FaceProximityGapFactor: float | None#

Gets or sets the FaceProximityGapFactor for PCTet.

property AutomaticMethod.FallBackMeshType: Ansys.Mechanical.DataModel.Enums.SweepAxisymmetricFallBackMeshType | None#

Gets or sets the FallBackMeshType.

property AutomaticMethod.FeatureAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the FeatureAngle.

property AutomaticMethod.FeatureProtectionAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the DihedralAngle for AutoNodeMove under PCTet.

property AutomaticMethod.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#

Gets the list of associated figures.

property AutomaticMethod.FilletCollapse: int | None#

Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ).

property AutomaticMethod.FillingDirection: Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None#

Gets or sets the FillingDirection.

property AutomaticMethod.FillingFraction: float | None#

Gets or sets the FillingFraction.

property AutomaticMethod.FreeFaceMeshType: int | None#

Gets or sets the FreeFaceMeshType.

property AutomaticMethod.FreeMeshType: int | None#

Gets or sets the FreeMeshType.

property AutomaticMethod.GenerateLayersUsingFacets: bool | None#

Gets or sets the GenerateLayersUsingFacets.

property AutomaticMethod.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#

Gets the list of associated images.

property AutomaticMethod.ImprovementIterations: int | None#

Gets or sets the ImprovementIterations for AutoNodeMove under PCTet.

property AutomaticMethod.InflateRelativeTolerance: float | None#

Gets or sets the InflateRelativeTolerance.

property AutomaticMethod.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlAuto | None#

Gets the internal object. For advanced usage only.

property AutomaticMethod.KeyPointsSelection: Ansys.Mechanical.DataModel.Enums.AutomaticOrManual | None#

Gets or sets the KeyPointsSelection.

property AutomaticMethod.KeyPointsTolerance: Ansys.Core.Units.Quantity | None#

Gets or sets the KeyPoints Tolerance in Multizone.

property AutomaticMethod.LateralDefeatureSize: float | None#

Gets or sets the LateralDefeatureSize.

property AutomaticMethod.LayerHeight: float | None#

Gets or sets the LayerHeight.

property AutomaticMethod.LayerStart: float | None#

Gets or sets the LayerStart.

property AutomaticMethod.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the Location.

property AutomaticMethod.MZSweepNumberDivisions: int | None#
property AutomaticMethod.MappedSweptType: int | None#

Gets or sets the MappedSweptType.

property AutomaticMethod.MatchMeshWherePossible: bool | None#

Gets or sets the MatchMeshWherePossible.

property AutomaticMethod.MaximumElementSize: Ansys.Core.Units.Quantity | None#

Gets or sets the MaximumElementSize.

property AutomaticMethod.MeshBasedDefeaturing: bool | None#

Gets or sets the MeshBasedDefeaturing.

property AutomaticMethod.MeshFlowControl: Ansys.Mechanical.DataModel.Enums.MeshFlowControlMethod | None#

Gets or sets the MeshFlowControl.

property AutomaticMethod.MeshInCenter: int | None#

Gets or sets the MeshInCenter.

property AutomaticMethod.MeshType: Ansys.Mechanical.DataModel.Enums.MethodMeshType | None#

Gets or sets the MeshType.

property AutomaticMethod.MeshUsingVoxelization: bool | None#

Gets or sets the MeshUsingVoxelization.

property AutomaticMethod.Method: Ansys.Mechanical.DataModel.Enums.MethodType | None#

Gets or sets the Method.

property AutomaticMethod.MinimumEdgeLength: Ansys.Core.Units.Quantity | None#

Gets the MinimumEdgeLength.

property AutomaticMethod.MinimumSizeLimit: Ansys.Core.Units.Quantity | None#

Gets or sets the MinimumSizeLimit.

property AutomaticMethod.MinimumThickness: Ansys.Core.Units.Quantity | None#

Gets or sets the MinimumThickness for PCTet.

property AutomaticMethod.NamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None#

Gets or sets the NamedSelection.

property AutomaticMethod.NumberOfCellsAcrossGap: int | None#

Gets or sets the NumberOfCellsAcrossGap.

property AutomaticMethod.NumberOfElementLayers: int | None#

Gets or sets the NumberOfElementLayers for PCTet.

property AutomaticMethod.OverlappingAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the OverlappingAngle.

property AutomaticMethod.PartialFill: bool | None#

Gets or sets the PartialFill.

property AutomaticMethod.ParticleCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the ParticleCoordinateSystem.

property AutomaticMethod.ParticleDiameter: Ansys.Core.Units.Quantity | None#

Gets or sets the ParticleDiameter.

property AutomaticMethod.PreserveBoundaries: int | None#

Gets or sets the PreserveBoundaries.

property AutomaticMethod.PrimeMethodAutoRepair: Ansys.Mechanical.DataModel.Enums.YesNoType | None#

Gets or sets the PrimeMethodAutoRepair.

property AutomaticMethod.ProjectCornersToTop: bool | None#

Gets or sets the ProjectCornersToTop.

property AutomaticMethod.ProjectInConstantZPlane: bool | None#

Gets or sets the ProjectInConstantZPlane.

property AutomaticMethod.ProjectionFactor: float | None#

Gets or sets the ProjectionFactor.

property AutomaticMethod.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties for this object.

property AutomaticMethod.RadialGrowthRate: float | None#

Gets or sets the RadialGrowthRate.

property AutomaticMethod.RefineAtThinSection: bool | None#

Gets or sets the RefineAtThinSection for PCTet.

property AutomaticMethod.RefineSurfaceMesh: bool | None#

Gets or sets the RefineSurfaceMesh for PCTet.

property AutomaticMethod.Refinement: int | None#

Gets or sets the Refinement.

property AutomaticMethod.RelativeTolerance: float | None#

Gets or sets the PrimeRelativeTolerance.

property AutomaticMethod.RemoveSharpAngleFaces: Ansys.Mechanical.DataModel.Enums.YesNoType | None#

Gets or sets the RemoveSharpAngleFaces.

property AutomaticMethod.RepairFacets: bool | None#

Gets or sets the RepairFacets.

property AutomaticMethod.RestrictNodeMovementsToSurface: bool | None#

Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet.

property AutomaticMethod.ReuseBlocking: bool | None#

Gets or sets the ReuseBlocking.

property AutomaticMethod.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#

Gets or sets the ScopingMethod.

property AutomaticMethod.ShowAdvancedImproveOptions: bool | None#

Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet.

property AutomaticMethod.SlicerFeatureAngle: float | None#

Gets or sets the SlicerFeatureAngle.

property AutomaticMethod.SliverTriangleHeight: float | None#

Gets or sets the SliverTriangleHeight.

property AutomaticMethod.SmoothMeshSpacing: bool | None#

Gets or sets the SmoothMeshSpacing in Multizone.

property AutomaticMethod.SmoothTransition: bool | None#

Gets or sets the SmoothTransition.

property AutomaticMethod.SolidShellElementForStacker: Ansys.Mechanical.DataModel.Enums.YesNoType | None#

Gets or sets the SolidShellElementForStacker.

property AutomaticMethod.SolidShellElementForStackerGeometrySelection: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the SolidShellElementForStackerGeometrySelection.

property AutomaticMethod.SolidShellElementForStackerNamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None#

Gets or sets the SolidShellElementForStackerNamedSelection.

property AutomaticMethod.SolidShellElementForStackerScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#

Gets or sets the SolidShellElementForStackerScopingMethod.

property AutomaticMethod.SourceLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the SourceLocation.

property AutomaticMethod.SourceTargetSelection: int | None#

Gets or sets the SourceTargetSelection.

property AutomaticMethod.SpacingOption: int | None#

Gets or sets the SpacingOption.

property AutomaticMethod.SplitAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the SplitAngle in Multizone.

property AutomaticMethod.StackerCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the StackerCoordinateSystem.

property AutomaticMethod.StackerFreeFaceMeshType: Ansys.Mechanical.DataModel.Enums.StackerMethodMeshType | None#

Gets or sets the StackerFreeFaceMeshType.

property AutomaticMethod.StackerTriangleReduction: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None#

Gets or sets the StackerTriangleReduction.

property AutomaticMethod.StackingAxis: Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None#

Gets or sets the StackingAxis.

property AutomaticMethod.StackingDefeatureSize: float | None#

Gets or sets the StackingDefeatureSize.

property AutomaticMethod.StretchFactorX: float | None#

Gets or sets the StretchFactorX.

property AutomaticMethod.StretchFactorY: float | None#

Gets or sets the StretchFactorY.

property AutomaticMethod.StretchFactorZ: float | None#

Gets or sets the StretchFactorZ.

property AutomaticMethod.SubsampleRate: int | None#

Gets or sets the SubsampleRate.

property AutomaticMethod.Suppressed: bool | None#

Gets or sets the Suppressed.

property AutomaticMethod.SurfaceMeshMethod: int | None#

Gets or sets the SurfaceMeshMethod.

property AutomaticMethod.SweepBiasType: Ansys.Mechanical.DataModel.Enums.BiasType | None#

Gets or sets the SweepBiasType.

property AutomaticMethod.SweepBiasValue: float | None#

Gets or sets the SweepBiasValue.

property AutomaticMethod.SweepESizeType: int | None#

Gets or sets the SweepESizeType.

property AutomaticMethod.SweepEdges: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the SweepEdges.

property AutomaticMethod.SweepElementSize: Ansys.Core.Units.Quantity | None#

Gets or sets the SweepElementSize.

property AutomaticMethod.SweepNumberDivisions: int | None#

Gets or sets the SweepNumberDivisions.

property AutomaticMethod.SweepSizeBehavior: int | None#

Gets or sets the SweepSizeBehavior.

property AutomaticMethod.SweepThickness: Ansys.Core.Units.Quantity | None#

Gets or sets the SweepThickness in Multizone.

property AutomaticMethod.TargetLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the TargetLocation.

property AutomaticMethod.TetraGrowthRate: float | None#

Gets or sets the TetraGrowthRate.

property AutomaticMethod.TriangleReduction: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None#

Gets or sets the TriangleReduction.

property AutomaticMethod.UseSplitAngle: bool | None#

Gets or sets the UseSplitAngle in Multizone.

property AutomaticMethod.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties that are visible for this object.

property AutomaticMethod.WallThickness: Ansys.Core.Units.Quantity | None#

Gets or sets the WallThickness.

property AutomaticMethod.WriteICEMCFDFiles: bool | None#

Gets or sets the WriteICEMCFDFiles.

Method detail#

AutomaticMethod.Activate() None#

Activate the current object.

AutomaticMethod.AddComment() Ansys.ACT.Automation.Mechanical.Comment#

Creates a new child Comment.

AutomaticMethod.AddFigure() Ansys.ACT.Automation.Mechanical.Figure#

Creates a new child Figure.

AutomaticMethod.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image#
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
AutomaticMethod.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None#

Copies all visible properties from this object to another.

AutomaticMethod.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Creates a new parameter for a Property.

AutomaticMethod.Delete() None#

Run the Delete action.

AutomaticMethod.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Creates a copy of the current DataModelObject.

AutomaticMethod.GenerateMesh() None#

Generate the Mesh.

AutomaticMethod.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType]#

Gets the list of children, filtered by type.

AutomaticMethod.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Gets the parameter corresponding to the given property.

AutomaticMethod.GroupAllSimilarChildren() None#

Run the GroupAllSimilarChildren action.

AutomaticMethod.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#

Run the GroupSimilarObjects action.

AutomaticMethod.PropertyByAPIName(name: str) Ansys.ACT.Automation.Mechanical.Property#
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
AutomaticMethod.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property#

Get a property by its unique name.

AutomaticMethod.RemoveParameter(propName: str) None#

Removes the parameter from the parameter set corresponding to the given property.

AutomaticMethod.RenameBasedOnDefinition() None#

Run the RenameBasedOnDefinition action.