CondensedPart#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.CondensedPart#

Bases: object

Defines a CondensedPart.

Overview#

Activate

Activate the current object.

AddCommandSnippet

Creates a new CommandSnippet

AddComment

Creates a new child Comment.

AddFigure

Creates a new child Figure.

AddImage

Creates a new child Image.

ClearGeneratedData

Run the ClearGeneratedData action.

CopyTo

Copies all visible properties from this object to another.

CreateParameter

Creates a new parameter for a Property.

Delete

Run the Delete action.

DetectCondensedPartInterface

Run the DetectCondensedPartInterface action.

Duplicate

Creates a copy of the current DataModelObject.

Export

Run the Export Condensed Part action.

GenerateCondensedParts

Run the GenerateCondensedParts action.

GetChildren

Gets the list of children, filtered by type.

GetParameter

Gets the parameter corresponding to the given property.

GroupAllSimilarChildren

Run the GroupAllSimilarChildren action.

GroupSimilarObjects

Run the GroupSimilarObjects action.

PropertyByAPIName

Get a property by its API name.

PropertyByName

Get a property by its unique name.

RemoveParameter

Removes the parameter from the parameter set corresponding to the given property.

AttachmentMethod

Gets or sets the AttachmentMethod.

Children

Gets the list of children.

Comments

Gets the list of associated comments.

DataModelObjectCategory

Gets the current DataModelObject's category.

Figures

Gets the list of associated figures.

FutureExpansion

Gets or sets the FutureExpansion.

FutureIntent

“FutureIntent” property defines the type of solver supported to perform a use pass with the condensed part.

GenerateDampingMatrix

Gets or sets the GenerateDampingMatrix.

GeometrySelection

Gets or sets the GeometrySelection.

Images

Gets the list of associated images.

InterfaceMethod

Gets or sets the InterfaceMethod.

Interfaces

Returns the Interfaces of the condensed part

InternalObject

Gets the internal object. For advanced usage only.

KeepFilesFor

Gets or sets the KeepFilesFor.

LumpedMassFormulation

Gets or sets the LumpedMassFormulation.

MaximumFrequency

Gets or sets the MaximumFrequency.

MinimumFrequency

Gets or sets the MinimumFrequency.

NumberInterfaceEntries

Gets the NumberInterfaceEntries.

NumberMasterNodes

Gets the NumberMasterNodes.

NumberOfModes

Gets or sets the NumberOfModes.

Physics

Gets the Physics.

PointMassTreatment

Gets or sets the PointMassTreatment.

Properties

Gets the list of properties for this object.

RangeSearch

Gets or sets the RangeSearch.

ReductionMethod

Gets or sets the ReductionMethod.

ReferenceTemperature

Gets or sets the ReferenceTemperature.

SolutionName

Gets or sets the SolutionName.

SolutionNameMode

Gets or sets the SolutionNameMode.

SolverFilesDirectory

Gets the SolverFilesDirectory.

SolverType

Gets or sets the SolverType.

SolverUnitSystem

Gets or sets the SolverUnitSystem.

SolverUnits

Gets or sets the SolverUnits.

StoreBasisResults

Gets or sets the StoreBasisResults.

Suppressed

Gets or sets the Suppressed.

TemperatureUnits

Gets the TemperatureUnits.

VisibleProperties

Gets the list of properties that are visible for this object.

Property detail#

property CondensedPart.AttachmentMethod: Ansys.Mechanical.DataModel.Enums.CondensedPartCMSAttachmentMethod | None#

Gets or sets the AttachmentMethod.

property CondensedPart.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets the list of children.

property CondensedPart.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#

Gets the list of associated comments.

property CondensedPart.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#

Gets the current DataModelObject's category.

property CondensedPart.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#

Gets the list of associated figures.

property CondensedPart.FutureExpansion: Ansys.Mechanical.DataModel.Enums.YesNoProgrammedControlled | None#

Gets or sets the FutureExpansion.

property CondensedPart.FutureIntent: Ansys.Mechanical.DataModel.Enums.FutureIntentType | None#

“FutureIntent” property defines the type of solver supported to perform a use pass with the condensed part.

property CondensedPart.GenerateDampingMatrix: Ansys.Mechanical.DataModel.Enums.YesNoProgrammedControlled | None#

Gets or sets the GenerateDampingMatrix.

property CondensedPart.GeometrySelection: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the GeometrySelection.

property CondensedPart.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#

Gets the list of associated images.

property CondensedPart.InterfaceMethod: Ansys.Mechanical.DataModel.Enums.CondensedPartInterfaceMethod | None#

Gets or sets the InterfaceMethod.

property CondensedPart.Interfaces: Ansys.ACT.Automation.Mechanical.CondensedPartInterfaces | None#

Returns the Interfaces of the condensed part

property CondensedPart.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSCondensedPartAuto | None#

Gets the internal object. For advanced usage only.

property CondensedPart.KeepFilesFor: Ansys.Mechanical.DataModel.Enums.CondensedPartKeepFilesFor | None#

Gets or sets the KeepFilesFor.

property CondensedPart.LumpedMassFormulation: Ansys.Mechanical.DataModel.Enums.CondensedPartLumpedMassFormulation | None#

Gets or sets the LumpedMassFormulation.

property CondensedPart.MaximumFrequency: Ansys.Core.Units.Quantity | None#

Gets or sets the MaximumFrequency.

property CondensedPart.MinimumFrequency: Ansys.Core.Units.Quantity | None#

Gets or sets the MinimumFrequency.

property CondensedPart.NumberInterfaceEntries: int | None#

Gets the NumberInterfaceEntries.

property CondensedPart.NumberMasterNodes: int | None#

Gets the NumberMasterNodes.

property CondensedPart.NumberOfModes: int | None#

Gets or sets the NumberOfModes.

property CondensedPart.Physics: Ansys.Mechanical.DataModel.Enums.CondensedPartPhysics | None#

Gets the Physics.

property CondensedPart.PointMassTreatment: Ansys.Mechanical.DataModel.Enums.CondensedPartPointMassTreatment | None#

Gets or sets the PointMassTreatment.

property CondensedPart.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties for this object.

property CondensedPart.RangeSearch: bool | None#

Gets or sets the RangeSearch.

property CondensedPart.ReductionMethod: Ansys.Mechanical.DataModel.Enums.CondensedPartReductionMethod | None#

Gets or sets the ReductionMethod.

property CondensedPart.ReferenceTemperature: Ansys.Core.Units.Quantity | None#

Gets or sets the ReferenceTemperature.

property CondensedPart.SolutionName: str | None#

Gets or sets the SolutionName.

property CondensedPart.SolutionNameMode: Ansys.Mechanical.DataModel.Enums.AutomaticOrManual | None#

Gets or sets the SolutionNameMode.

property CondensedPart.SolverFilesDirectory: str | None#

Gets the SolverFilesDirectory.

property CondensedPart.SolverType: Ansys.Mechanical.DataModel.Enums.SolverType | None#

Gets or sets the SolverType.

property CondensedPart.SolverUnitSystem: Ansys.Mechanical.DataModel.Enums.WBUnitSystemType | None#

Gets or sets the SolverUnitSystem.

property CondensedPart.SolverUnits: Ansys.Mechanical.DataModel.Enums.SolverUnitsControlType | None#

Gets or sets the SolverUnits.

property CondensedPart.StoreBasisResults: Ansys.Mechanical.DataModel.Enums.YesNoProgrammedControlled | None#

Gets or sets the StoreBasisResults.

property CondensedPart.Suppressed: bool | None#

Gets or sets the Suppressed.

property CondensedPart.TemperatureUnits: str | None#

Gets the TemperatureUnits.

property CondensedPart.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties that are visible for this object.

Method detail#

CondensedPart.Activate() None#

Activate the current object.

CondensedPart.AddCommandSnippet() Ansys.ACT.Automation.Mechanical.CommandSnippet#

Creates a new CommandSnippet

CondensedPart.AddComment() Ansys.ACT.Automation.Mechanical.Comment#

Creates a new child Comment.

CondensedPart.AddFigure() Ansys.ACT.Automation.Mechanical.Figure#

Creates a new child Figure.

CondensedPart.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image#
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
CondensedPart.ClearGeneratedData() None#

Run the ClearGeneratedData action.

CondensedPart.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None#

Copies all visible properties from this object to another.

CondensedPart.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Creates a new parameter for a Property.

CondensedPart.Delete() None#

Run the Delete action.

CondensedPart.DetectCondensedPartInterface() None#

Run the DetectCondensedPartInterface action.

CondensedPart.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Creates a copy of the current DataModelObject.

CondensedPart.Export(exportFileName: str, exportFormat: Ansys.Mechanical.DataModel.MechanicalEnums.CondensedParts.ExportFormat, exportSettings: Ansys.ACT.Automation.Mechanical.CondensedParts.ExportSettings) None#

Run the Export Condensed Part action.

CondensedPart.GenerateCondensedParts() None#

Run the GenerateCondensedParts action.

CondensedPart.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType]#

Gets the list of children, filtered by type.

CondensedPart.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Gets the parameter corresponding to the given property.

CondensedPart.GroupAllSimilarChildren() None#

Run the GroupAllSimilarChildren action.

CondensedPart.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#

Run the GroupSimilarObjects action.

CondensedPart.PropertyByAPIName(name: str) Ansys.ACT.Automation.Mechanical.Property#
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
CondensedPart.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property#

Get a property by its unique name.

CondensedPart.RemoveParameter(propName: str) None#

Removes the parameter from the parameter set corresponding to the given property.