`EquivalentStress`#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Results.StressResults.EquivalentStress#

Bases: object

Defines a EquivalentStress.

Overview#

Methods

`ClearGeneratedData`	Run the ClearGeneratedData action.
`EvaluateAllResults`	Run the EvaluateAllResults action.
`FetchRemoteResults`	Run the FetchRemoteResult action.
`ExportToTextFile`	Run the ExportToTextFile action.
`ExportAnimation`	Run the ExportAnimation action.
`DuplicateWithoutResults`	Run the DuplicateWithoutResults action.
`CreateResultsAtAllSets`	Creates results at all sets for results under a solution.
`PromoteToNamedSelection`	Run the PromoteToNamedSelection action.
`CreateParameter`	CreateParameter method.
`AddAlert`	Creates a new Alert
`AddConvergence`	Creates a new Convergence
`RenameBasedOnDefinition`	Run the RenameBasedOnDefinition action.
`Delete`	Run the Delete action.
`GetChildren`	Gets the list of children, filtered by type.
`GetChildren`	Gets the list of children, filtered by type.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`Activate`	Activate the current object.
`CopyTo`	Copies all visible properties from this object to another.
`Duplicate`	Creates a copy of the current DataModelObject.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PropertyByName`	Get a property by its unique name.
`PropertyByAPIName`	Get a property by its API name.
`GetParameter`	Gets the parameter corresponding to the given property.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.

Properties

`InternalObject`	Gets the internal object. For advanced usage only.
`DataModelObjectCategory`	Gets the current DataModelObject’s category.
`Mode`	Gets or sets the Mode.
`Ply`	Gets or sets the Ply selection.
`Plies`	Plies property.
`EnvironmentSelection`	Gets or sets the EnvironmentSelection.
`HarmonicIndex`	Gets or sets the HarmonicIndex.
`CyclicMode`	Gets or sets the CyclicMode.
`IterationStep`	Gets or sets the IterationStep.
`Layer`	Gets or sets the Layer.
`LoadMultiplier`	Gets the LoadMultiplier.
`Probability`	Gets the Probability.
`ReportedFrequency`	Gets the ReportedFrequency.
`AverageRadiusOfCurvature`	Gets or sets the AverageRadiusOfCurvature.
`BendingInside`	Gets the BendingInside.
`BendingOutside`	Gets the BendingOutside.
`MembraneBendingCenter`	Gets the MembraneBendingCenter.
`MembraneBendingInside`	Gets the MembraneBendingInside.
`MembraneBendingOutside`	Gets the MembraneBendingOutside.
`Membrane`	Gets the Membrane.
`PeakCenter`	Gets the PeakCenter.
`PeakInside`	Gets the PeakInside.
`PeakOutside`	Gets the PeakOutside.
`SweepingPhase`	Gets or sets the SweepingPhase.
`PhaseIncrement`	Gets or sets the PhaseIncrement.
`Frequency`	Gets or sets the Frequency.
`TotalCenter`	Gets the TotalCenter.
`TotalInside`	Gets the TotalInside.
`TotalOutside`	Gets the TotalOutside.
`Linearized2DBehavior`	Gets or sets the Linearized2DBehavior.
`Subtype`	Gets or sets the Subtype.
`NormalOrientation`	Gets or sets the NormalOrientation.
`ScaleFactor`	Gets or sets the ScaleFactor.
`Position`	Gets or sets the Position.
`StressStrainType`	Gets or sets the StressStrainType.
`SubScopeBy`	Gets or sets the SubScopeBy.
`ThroughThicknessBendingStress`	Gets or sets the ThroughThicknessBendingStress.
`Amplitude`	Gets or sets the Amplitude.
`AverageAcrossBodies`	Gets or sets the AverageAcrossBodies.
`PlotData`	Gets the result table.
`Location`	Gets or sets the Location.
`TimeForMinimumOfMinimumValues`	Get the Time for the minimum of minimum values.
`TimeForMinimumOfMaximumValues`	Get the Time for the minimum of maximum values.
`LoadStepForMinimumOfMinimumValues`	Get the Load Step for the minimum of minimum values.
`LoadStepForMinimumOfMaximumValues`	Get the Load Step for the minimum of maximum values.
`TimeForMaximumOfMinimumValues`	Get the Time for the maximum of minimum values.
`TimeForMaximumOfMaximumValues`	Get the Time for the maximum of maximum values.
`LoadStepForMaximumOfMinimumValues`	Get the Load Step for the maximum of minimum values.
`LoadStepForMaximumOfMaximumValues`	Get the Load Step for the maximum of maximum values.
`IsSolved`	Gets the IsSolved.
`CoordinateSystem`	Gets or sets the Coordinate System.
`ScopingMethod`	Gets or sets the ScopingMethod.
`SetNumber`	Gets or sets the Set Number.
`CombinationNumber`	Gets or sets the Combination Number for a Solution Combination result.
`SolutionCombinationDriver`	Gets or sets the SolutionCombinationDriver.
`Path`	Path property.
`Surface`	Surface property.
`SurfaceCoating`	SurfaceCoating property.
`NamedSelections`	Gets or sets the NamedSelections.
`WaterfallShowTextOnMosaic`	Gets or sets the Waterfall Mosaic Text Property.
`CrackFrontNumber`	Gets or sets the CrackFrontNumber.
`GlobalIDs`	Gets or sets the GlobalIDs.
`Identifier`	Gets or sets the Identifier.
`IterationNumber`	Gets the IterationNumber.
`LoadStep`	Gets the LoadStep.
`MaximumOccursOn`	Gets the MaximumOccursOn.
`MinimumOccursOn`	Gets the MinimumOccursOn.
`LoadStepNumber`	Gets or sets the LoadStepNumber.
`SolverComponentIDs`	Gets or sets the SolverComponentIDs.
`Substep`	Gets the Substep.
`Average`	Gets the Average.
`Maximum`	Gets the Maximum.
`MaximumOfMaximumOverTime`	Gets the MaximumOfMaximumOverTime.
`MaximumOfMinimumOverTime`	Gets the MaximumOfMinimumOverTime.
`Minimum`	Gets the Minimum.
`MinimumOfMaximumOverTime`	Gets the MinimumOfMaximumOverTime.
`MinimumOfMinimumOverTime`	Gets the MinimumOfMinimumOverTime.
`Time`	Gets the Time.
`DisplayTime`	Gets or sets the DisplayTime.
`GraphControlsXAxis`	Gets or sets the GraphControlsXAxis.
`DisplayOption`	Gets or sets the DisplayOption.
`DpfEvaluation`	Gets or sets the DpfEvaluation.
`By`	Gets or sets the By.
`ItemType`	Gets or sets the ItemType.
`CalculateTimeHistory`	Gets or sets the CalculateTimeHistory.
`Suppressed`	Gets or sets the Suppressed.
`Children`	Gets the list of children.
`Comments`	Gets the list of associated comments.
`Figures`	Gets the list of associated figures.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`Properties`	Gets the list of properties for this object.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Property detail#

property EquivalentStress.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None: Gets the internal object. For advanced usage only.

property EquivalentStress.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None: Gets the current DataModelObject’s category.

property EquivalentStress.Mode: System.UInt32 | None: Gets or sets the Mode.

property EquivalentStress.Ply: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None: Gets or sets the Ply selection.

property EquivalentStress.Plies: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None: Plies property.

property EquivalentStress.EnvironmentSelection: Ansys.ACT.Automation.Mechanical.Analysis | None: Gets or sets the EnvironmentSelection.

property EquivalentStress.HarmonicIndex: System.UInt32 | None: Gets or sets the HarmonicIndex.

property EquivalentStress.CyclicMode: System.UInt32 | None: Gets or sets the CyclicMode.

property EquivalentStress.IterationStep: System.Int32 | None: Gets or sets the IterationStep.

property EquivalentStress.Layer: System.Int32 | None: Gets or sets the Layer.

property EquivalentStress.LoadMultiplier: System.Double | None: Gets the LoadMultiplier.

property EquivalentStress.Probability: System.Double | None: Gets the Probability.

property EquivalentStress.ReportedFrequency: Ansys.Core.Units.Quantity | None: Gets the ReportedFrequency.

property EquivalentStress.AverageRadiusOfCurvature: Ansys.Core.Units.Quantity | None: Gets or sets the AverageRadiusOfCurvature.

property EquivalentStress.BendingInside: Ansys.Core.Units.Quantity | None: Gets the BendingInside.

property EquivalentStress.BendingOutside: Ansys.Core.Units.Quantity | None: Gets the BendingOutside.

property EquivalentStress.MembraneBendingCenter: Ansys.Core.Units.Quantity | None: Gets the MembraneBendingCenter.

property EquivalentStress.MembraneBendingInside: Ansys.Core.Units.Quantity | None: Gets the MembraneBendingInside.

property EquivalentStress.MembraneBendingOutside: Ansys.Core.Units.Quantity | None: Gets the MembraneBendingOutside.

property EquivalentStress.Membrane: Ansys.Core.Units.Quantity | None: Gets the Membrane.

property EquivalentStress.PeakCenter: Ansys.Core.Units.Quantity | None: Gets the PeakCenter.

property EquivalentStress.PeakInside: Ansys.Core.Units.Quantity | None: Gets the PeakInside.

property EquivalentStress.PeakOutside: Ansys.Core.Units.Quantity | None: Gets the PeakOutside.

property EquivalentStress.SweepingPhase: Ansys.Core.Units.Quantity | None: Gets or sets the SweepingPhase.

property EquivalentStress.PhaseIncrement: Ansys.Core.Units.Quantity | None: Gets or sets the PhaseIncrement.

property EquivalentStress.Frequency: Ansys.Core.Units.Quantity | None: Gets or sets the Frequency.

property EquivalentStress.TotalCenter: Ansys.Core.Units.Quantity | None: Gets the TotalCenter.

property EquivalentStress.TotalInside: Ansys.Core.Units.Quantity | None: Gets the TotalInside.

property EquivalentStress.TotalOutside: Ansys.Core.Units.Quantity | None: Gets the TotalOutside.

property EquivalentStress.Linearized2DBehavior: Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None: Gets or sets the Linearized2DBehavior.

property EquivalentStress.Subtype: Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None: Gets or sets the Subtype.

property EquivalentStress.NormalOrientation: Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None: Gets or sets the NormalOrientation.

property EquivalentStress.ScaleFactor: Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None: Gets or sets the ScaleFactor.

property EquivalentStress.Position: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None: Gets or sets the Position.

property EquivalentStress.StressStrainType: Ansys.Mechanical.DataModel.Enums.StressStrainType | None: Gets or sets the StressStrainType.

property EquivalentStress.SubScopeBy: Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None: Gets or sets the SubScopeBy.

property EquivalentStress.ThroughThicknessBendingStress: Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None: Gets or sets the ThroughThicknessBendingStress.

property EquivalentStress.Amplitude: System.Boolean | None: Gets or sets the Amplitude.

property EquivalentStress.AverageAcrossBodies: System.Boolean | None: Gets or sets the AverageAcrossBodies.

property EquivalentStress.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None: Gets the result table.

property EquivalentStress.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None: Gets or sets the Location.

property EquivalentStress.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None: Get the Time for the minimum of minimum values.

property EquivalentStress.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None: Get the Time for the minimum of maximum values.

property EquivalentStress.LoadStepForMinimumOfMinimumValues: System.UInt32 | None: Get the Load Step for the minimum of minimum values.

property EquivalentStress.LoadStepForMinimumOfMaximumValues: System.UInt32 | None: Get the Load Step for the minimum of maximum values.

property EquivalentStress.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None: Get the Time for the maximum of minimum values.

property EquivalentStress.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None: Get the Time for the maximum of maximum values.

property EquivalentStress.LoadStepForMaximumOfMinimumValues: System.UInt32 | None: Get the Load Step for the maximum of minimum values.

property EquivalentStress.LoadStepForMaximumOfMaximumValues: System.UInt32 | None: Get the Load Step for the maximum of maximum values.

property EquivalentStress.IsSolved: System.Boolean | None: Gets the IsSolved.

property EquivalentStress.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None: Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property EquivalentStress.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None: Gets or sets the ScopingMethod.

property EquivalentStress.SetNumber: System.UInt32 | None: Gets or sets the Set Number.

property EquivalentStress.CombinationNumber: System.UInt32 | None: Gets or sets the Combination Number for a Solution Combination result.

property EquivalentStress.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None: Gets or sets the SolutionCombinationDriver.

property EquivalentStress.Path: Ansys.ACT.Automation.Mechanical.Path | None: Path property.

property EquivalentStress.Surface: Ansys.ACT.Automation.Mechanical.Surface | None: Surface property.

property EquivalentStress.SurfaceCoating: Ansys.ACT.Automation.Mechanical.SurfaceCoating | None: SurfaceCoating property.

property EquivalentStress.NamedSelections: System.Collections.Generic.IEnumerable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets or sets the NamedSelections.

property EquivalentStress.WaterfallShowTextOnMosaic: System.Boolean | None: Gets or sets the Waterfall Mosaic Text Property.

property EquivalentStress.CrackFrontNumber: System.Int32 | None: Gets or sets the CrackFrontNumber.

property EquivalentStress.GlobalIDs: System.String | None: Gets or sets the GlobalIDs.

property EquivalentStress.Identifier: System.String | None: Gets or sets the Identifier.

property EquivalentStress.IterationNumber: System.Int32 | None: Gets the IterationNumber.

property EquivalentStress.LoadStep: System.Int32 | None: Gets the LoadStep.

property EquivalentStress.MaximumOccursOn: System.String | None: Gets the MaximumOccursOn.

property EquivalentStress.MinimumOccursOn: System.String | None: Gets the MinimumOccursOn.

property EquivalentStress.LoadStepNumber: System.UInt32 | None: Gets or sets the LoadStepNumber.

property EquivalentStress.SolverComponentIDs: System.String | None: Gets or sets the SolverComponentIDs.

property EquivalentStress.Substep: System.Int32 | None: Gets the Substep.

property EquivalentStress.Average: Ansys.Core.Units.Quantity | None: Gets the Average.

property EquivalentStress.Maximum: Ansys.Core.Units.Quantity | None: Gets the Maximum.

property EquivalentStress.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None: Gets the MaximumOfMaximumOverTime.

property EquivalentStress.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None: Gets the MaximumOfMinimumOverTime.

property EquivalentStress.Minimum: Ansys.Core.Units.Quantity | None: Gets the Minimum.

property EquivalentStress.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None: Gets the MinimumOfMaximumOverTime.

property EquivalentStress.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None: Gets the MinimumOfMinimumOverTime.

property EquivalentStress.Time: Ansys.Core.Units.Quantity | None: Gets the Time.

property EquivalentStress.DisplayTime: Ansys.Core.Units.Quantity | None: Gets or sets the DisplayTime.

property EquivalentStress.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None: Gets or sets the GraphControlsXAxis.

property EquivalentStress.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None: Gets or sets the DisplayOption.

property EquivalentStress.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None: Gets or sets the DpfEvaluation.

property EquivalentStress.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None: Gets or sets the By.

property EquivalentStress.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None: Gets or sets the ItemType.

property EquivalentStress.CalculateTimeHistory: System.Boolean | None: Gets or sets the CalculateTimeHistory.

property EquivalentStress.Suppressed: System.Boolean | None: Gets or sets the Suppressed.

property EquivalentStress.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets the list of children.

property EquivalentStress.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None: Gets the list of associated comments.

property EquivalentStress.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None: Gets the list of associated figures.

property EquivalentStress.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None: Gets the list of associated images.

property EquivalentStress.InternalObject: System.Object | None: Gets the internal object. For advanced usage only.

property EquivalentStress.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties for this object.

property EquivalentStress.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties that are visible for this object.

Method detail#

EquivalentStress.ClearGeneratedData() → System.Void: Run the ClearGeneratedData action.

EquivalentStress.EvaluateAllResults() → System.Void: Run the EvaluateAllResults action.

EquivalentStress.FetchRemoteResults() → System.Void: Run the FetchRemoteResult action.

EquivalentStress.ExportToTextFile(filePath: System.String) → System.Void: Run the ExportToTextFile action.

EquivalentStress.ExportAnimation(filePath: System.String, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → System.Void: Run the ExportAnimation action.

EquivalentStress.DuplicateWithoutResults() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Run the DuplicateWithoutResults action.

EquivalentStress.CreateResultsAtAllSets() → System.Collections.Generic.List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Creates results at all sets for results under a solution.

EquivalentStress.PromoteToNamedSelection() → System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.NamedSelection]: Run the PromoteToNamedSelection action.

EquivalentStress.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: CreateParameter method.

EquivalentStress.AddAlert() → Ansys.ACT.Automation.Mechanical.Results.Alert: Creates a new Alert

EquivalentStress.AddConvergence() → Ansys.ACT.Automation.Mechanical.Results.Convergence: Creates a new Convergence

EquivalentStress.RenameBasedOnDefinition() → System.Void: Run the RenameBasedOnDefinition action.

EquivalentStress.Delete() → System.Void: Run the Delete action.

EquivalentStress.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]: Gets the list of children, filtered by type.

EquivalentStress.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Gets the list of children, filtered by type.

EquivalentStress.AddComment() → Ansys.ACT.Automation.Mechanical.Comment: Creates a new child Comment.

EquivalentStress.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure: Creates a new child Figure.

EquivalentStress.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

EquivalentStress.Activate() → System.Void: Activate the current object.

EquivalentStress.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void: Copies all visible properties from this object to another.

EquivalentStress.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Creates a copy of the current DataModelObject.

EquivalentStress.GroupAllSimilarChildren() → System.Void: Run the GroupAllSimilarChildren action.

EquivalentStress.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder: Run the GroupSimilarObjects action.

EquivalentStress.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property: Get a property by its unique name.

EquivalentStress.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

EquivalentStress.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Gets the parameter corresponding to the given property.

EquivalentStress.RemoveParameter(propName: System.String) → System.Void: Removes the parameter from the parameter set corresponding to the given property.