TotalMagneticFluxDensity
#
- class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Results.ElectromagneticResults.TotalMagneticFluxDensity#
Bases:
object
Defines a TotalMagneticFluxDensity.
Overview#
Activate the current object. |
|
Creates a new Alert |
|
Creates a new child Comment. |
|
Creates a new Convergence |
|
Creates a new child Figure. |
|
Creates a new child Image. |
|
Run the ClearGeneratedData action. |
|
Copies all visible properties from this object to another. |
|
CreateParameter method. |
|
Creates results at all sets for results under a solution. |
|
Run the Delete action. |
|
Creates a copy of the current DataModelObject. |
|
Run the DuplicateWithoutResults action. |
|
Run the EvaluateAllResults action. |
|
Run the ExportAnimation action. |
|
Run the ExportToTextFile action. |
|
Run the FetchRemoteResult action. |
|
Gets the list of children, filtered by type. |
|
Gets the parameter corresponding to the given property. |
|
Run the GroupAllSimilarChildren action. |
|
Run the GroupSimilarObjects action. |
|
Run the PromoteToNamedSelection action. |
|
Get a property by its API name. |
|
Get a property by its unique name. |
|
Removes the parameter from the parameter set corresponding to the given property. |
|
Run the RenameBasedOnDefinition action. |
Gets the Average. |
|
Gets or sets the AverageAcrossBodies. |
|
Gets or sets the By. |
|
Gets or sets the CalculateTimeHistory. |
|
Gets the list of children. |
|
Gets or sets the Combination Number for a Solution Combination result. |
|
Gets the list of associated comments. |
|
Gets or sets the Coordinate System. |
|
Gets or sets the CrackFrontNumber. |
|
Gets the current DataModelObject's category. |
|
Gets or sets the DisplayOption. |
|
Gets or sets the DisplayTime. |
|
Gets or sets the DpfEvaluation. |
|
Gets or sets the ElectromagneticResultType. |
|
Gets the list of associated figures. |
|
Gets or sets the GlobalIDs. |
|
Gets or sets the GraphControlsXAxis. |
|
Gets or sets the Identifier. |
|
Gets the list of associated images. |
|
Gets the internal object. For advanced usage only. |
|
Gets the IsSolved. |
|
Gets or sets the ItemType. |
|
Gets the IterationNumber. |
|
Gets the LoadStep. |
|
Get the Load Step for the maximum of maximum values. |
|
Get the Load Step for the maximum of minimum values. |
|
Get the Load Step for the minimum of maximum values. |
|
Get the Load Step for the minimum of minimum values. |
|
Gets or sets the LoadStepNumber. |
|
Gets or sets the Location. |
|
Gets the Maximum. |
|
Gets the MaximumOccursOn. |
|
Gets the MaximumOfMaximumOverTime. |
|
Gets the MaximumOfMinimumOverTime. |
|
Gets the Minimum. |
|
Gets the MinimumOccursOn. |
|
Gets the MinimumOfMaximumOverTime. |
|
Gets the MinimumOfMinimumOverTime. |
|
Gets or sets the NamedSelections. |
|
Path property. |
|
Gets the result table. |
|
Gets the list of properties for this object. |
|
Gets or sets the ScopingMethod. |
|
Gets or sets the Set Number. |
|
Gets or sets the SolutionCombinationDriver. |
|
Gets or sets the SolverComponentIDs. |
|
Gets the Substep. |
|
Gets or sets the Suppressed. |
|
Surface property. |
|
SurfaceCoating property. |
|
Gets the Time. |
|
Get the Time for the maximum of maximum values. |
|
Get the Time for the maximum of minimum values. |
|
Get the Time for the minimum of maximum values. |
|
Get the Time for the minimum of minimum values. |
|
Gets the list of properties that are visible for this object. |
|
Gets or sets the Waterfall Mosaic Text Property. |
Property detail#
- property TotalMagneticFluxDensity.AverageAcrossBodies: bool | None#
Gets or sets the AverageAcrossBodies.
- property TotalMagneticFluxDensity.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None#
Gets or sets the By.
- property TotalMagneticFluxDensity.CalculateTimeHistory: bool | None#
Gets or sets the CalculateTimeHistory.
- property TotalMagneticFluxDensity.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#
Gets the list of children.
- property TotalMagneticFluxDensity.CombinationNumber: int | None#
Gets or sets the Combination Number for a Solution Combination result.
- property TotalMagneticFluxDensity.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#
Gets the list of associated comments.
- property TotalMagneticFluxDensity.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.
- property TotalMagneticFluxDensity.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#
Gets the current DataModelObject's category.
- property TotalMagneticFluxDensity.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None#
Gets or sets the DisplayOption.
- property TotalMagneticFluxDensity.DisplayTime: Ansys.Core.Units.Quantity | None#
Gets or sets the DisplayTime.
- property TotalMagneticFluxDensity.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None#
Gets or sets the DpfEvaluation.
- property TotalMagneticFluxDensity.ElectromagneticResultType: Ansys.Mechanical.DataModel.Enums.TotalOrDirectional | None#
Gets or sets the ElectromagneticResultType.
- property TotalMagneticFluxDensity.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#
Gets the list of associated figures.
- property TotalMagneticFluxDensity.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None#
Gets or sets the GraphControlsXAxis.
- property TotalMagneticFluxDensity.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#
Gets the list of associated images.
- property TotalMagneticFluxDensity.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None#
Gets the internal object. For advanced usage only.
- property TotalMagneticFluxDensity.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None#
Gets or sets the ItemType.
- property TotalMagneticFluxDensity.LoadStepForMaximumOfMaximumValues: int | None#
Get the Load Step for the maximum of maximum values.
- property TotalMagneticFluxDensity.LoadStepForMaximumOfMinimumValues: int | None#
Get the Load Step for the maximum of minimum values.
- property TotalMagneticFluxDensity.LoadStepForMinimumOfMaximumValues: int | None#
Get the Load Step for the minimum of maximum values.
- property TotalMagneticFluxDensity.LoadStepForMinimumOfMinimumValues: int | None#
Get the Load Step for the minimum of minimum values.
- property TotalMagneticFluxDensity.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the Location.
- property TotalMagneticFluxDensity.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#
Gets the MaximumOfMaximumOverTime.
- property TotalMagneticFluxDensity.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#
Gets the MaximumOfMinimumOverTime.
- property TotalMagneticFluxDensity.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#
Gets the MinimumOfMaximumOverTime.
- property TotalMagneticFluxDensity.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#
Gets the MinimumOfMinimumOverTime.
- property TotalMagneticFluxDensity.NamedSelections: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#
Gets or sets the NamedSelections.
- property TotalMagneticFluxDensity.Path: Ansys.ACT.Automation.Mechanical.Path | None#
Path property.
- property TotalMagneticFluxDensity.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None#
Gets the result table.
- property TotalMagneticFluxDensity.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties for this object.
- property TotalMagneticFluxDensity.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#
Gets or sets the ScopingMethod.
- property TotalMagneticFluxDensity.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None#
Gets or sets the SolutionCombinationDriver.
- property TotalMagneticFluxDensity.SolverComponentIDs: str | None#
Gets or sets the SolverComponentIDs.
- property TotalMagneticFluxDensity.Surface: Ansys.ACT.Automation.Mechanical.Surface | None#
Surface property.
- property TotalMagneticFluxDensity.SurfaceCoating: Ansys.ACT.Automation.Mechanical.SurfaceCoating | None#
SurfaceCoating property.
- property TotalMagneticFluxDensity.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None#
Get the Time for the maximum of maximum values.
- property TotalMagneticFluxDensity.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None#
Get the Time for the maximum of minimum values.
- property TotalMagneticFluxDensity.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None#
Get the Time for the minimum of maximum values.
- property TotalMagneticFluxDensity.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None#
Get the Time for the minimum of minimum values.
Method detail#
- TotalMagneticFluxDensity.AddAlert() Ansys.ACT.Automation.Mechanical.Results.Alert #
Creates a new Alert
- TotalMagneticFluxDensity.AddComment() Ansys.ACT.Automation.Mechanical.Comment #
Creates a new child Comment.
- TotalMagneticFluxDensity.AddConvergence() Ansys.ACT.Automation.Mechanical.Results.Convergence #
Creates a new Convergence
- TotalMagneticFluxDensity.AddFigure() Ansys.ACT.Automation.Mechanical.Figure #
Creates a new child Figure.
- TotalMagneticFluxDensity.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image #
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
- TotalMagneticFluxDensity.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None #
Copies all visible properties from this object to another.
- TotalMagneticFluxDensity.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
CreateParameter method.
- TotalMagneticFluxDensity.CreateResultsAtAllSets() List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] #
Creates results at all sets for results under a solution.
- TotalMagneticFluxDensity.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject #
Creates a copy of the current DataModelObject.
- TotalMagneticFluxDensity.DuplicateWithoutResults() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject #
Run the DuplicateWithoutResults action.
- TotalMagneticFluxDensity.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) None #
Run the ExportAnimation action.
- TotalMagneticFluxDensity.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType] #
Gets the list of children, filtered by type.
- TotalMagneticFluxDensity.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Gets the parameter corresponding to the given property.
- TotalMagneticFluxDensity.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder #
Run the GroupSimilarObjects action.
- TotalMagneticFluxDensity.PromoteToNamedSelection() Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection] #
Run the PromoteToNamedSelection action.
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
- TotalMagneticFluxDensity.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property #
Get a property by its unique name.