BendingStressEquivalent#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Results.StressResults.BendingStressEquivalent#

Bases: object

Defines a BendingStressEquivalent.

Overview#

Activate

Activate the current object.

AddAlert

Creates a new Alert

AddComment

Creates a new child Comment.

AddConvergence

Creates a new Convergence

AddFigure

Creates a new child Figure.

AddImage

Creates a new child Image.

ClearGeneratedData

Run the ClearGeneratedData action.

CopyTo

Copies all visible properties from this object to another.

CreateParameter

CreateParameter method.

CreateResultsAtAllSets

Creates results at all sets for results under a solution.

Delete

Run the Delete action.

Duplicate

Creates a copy of the current DataModelObject.

DuplicateWithoutResults

Run the DuplicateWithoutResults action.

EvaluateAllResults

Run the EvaluateAllResults action.

ExportAnimation

Run the ExportAnimation action.

ExportToTextFile

Run the ExportToTextFile action.

FetchRemoteResults

Run the FetchRemoteResult action.

GetChildren

Gets the list of children, filtered by type.

GetParameter

Gets the parameter corresponding to the given property.

GroupAllSimilarChildren

Run the GroupAllSimilarChildren action.

GroupSimilarObjects

Run the GroupSimilarObjects action.

PromoteToNamedSelection

Run the PromoteToNamedSelection action.

PropertyByAPIName

Get a property by its API name.

PropertyByName

Get a property by its unique name.

RemoveParameter

Removes the parameter from the parameter set corresponding to the given property.

RenameBasedOnDefinition

Run the RenameBasedOnDefinition action.

Amplitude

Gets or sets the Amplitude.

Average

Gets the Average.

AverageAcrossBodies

Gets or sets the AverageAcrossBodies.

AverageRadiusOfCurvature

Gets or sets the AverageRadiusOfCurvature.

BendingInside

Gets the BendingInside.

BendingOutside

Gets the BendingOutside.

By

Gets or sets the By.

CalculateTimeHistory

Gets or sets the CalculateTimeHistory.

Children

Gets the list of children.

CombinationNumber

Gets or sets the Combination Number for a Solution Combination result.

Comments

Gets the list of associated comments.

CoordinateSystem

Gets or sets the Coordinate System.

CrackFrontNumber

Gets or sets the CrackFrontNumber.

CyclicMode

Gets or sets the CyclicMode.

DataModelObjectCategory

Gets the current DataModelObject's category.

DisplayOption

Gets or sets the DisplayOption.

DisplayTime

Gets or sets the DisplayTime.

DpfEvaluation

Gets or sets the DpfEvaluation.

EnvironmentSelection

Gets or sets the EnvironmentSelection.

Figures

Gets the list of associated figures.

Frequency

Gets or sets the Frequency.

GlobalIDs

Gets or sets the GlobalIDs.

GraphControlsXAxis

Gets or sets the GraphControlsXAxis.

HarmonicIndex

Gets or sets the HarmonicIndex.

Identifier

Gets or sets the Identifier.

Images

Gets the list of associated images.

InternalObject

Gets the internal object. For advanced usage only.

IsSolved

Gets the IsSolved.

ItemType

Gets or sets the ItemType.

IterationNumber

Gets the IterationNumber.

IterationStep

Gets or sets the IterationStep.

Layer

Gets or sets the Layer.

Linearized2DBehavior

Gets or sets the Linearized2DBehavior.

LoadMultiplier

Gets the LoadMultiplier.

LoadStep

Gets the LoadStep.

LoadStepForMaximumOfMaximumValues

Get the Load Step for the maximum of maximum values.

LoadStepForMaximumOfMinimumValues

Get the Load Step for the maximum of minimum values.

LoadStepForMinimumOfMaximumValues

Get the Load Step for the minimum of maximum values.

LoadStepForMinimumOfMinimumValues

Get the Load Step for the minimum of minimum values.

LoadStepNumber

Gets or sets the LoadStepNumber.

Location

Gets or sets the Location.

Maximum

Gets the Maximum.

MaximumOccursOn

Gets the MaximumOccursOn.

MaximumOfMaximumOverTime

Gets the MaximumOfMaximumOverTime.

MaximumOfMinimumOverTime

Gets the MaximumOfMinimumOverTime.

Membrane

Gets the Membrane.

MembraneBendingCenter

Gets the MembraneBendingCenter.

MembraneBendingInside

Gets the MembraneBendingInside.

MembraneBendingOutside

Gets the MembraneBendingOutside.

Minimum

Gets the Minimum.

MinimumOccursOn

Gets the MinimumOccursOn.

MinimumOfMaximumOverTime

Gets the MinimumOfMaximumOverTime.

MinimumOfMinimumOverTime

Gets the MinimumOfMinimumOverTime.

Mode

Gets or sets the Mode.

NamedSelections

Gets or sets the NamedSelections.

NormalOrientation

Gets or sets the NormalOrientation.

Path

Path property.

PeakCenter

Gets the PeakCenter.

PeakInside

Gets the PeakInside.

PeakOutside

Gets the PeakOutside.

PhaseIncrement

Gets or sets the PhaseIncrement.

Plies

Plies property.

PlotData

Gets the result table.

Ply

Gets or sets the Ply selection.

Position

Gets or sets the Position.

Probability

Gets the Probability.

Properties

Gets the list of properties for this object.

ReportedFrequency

Gets the ReportedFrequency.

ScaleFactor

Gets or sets the ScaleFactor.

ScopingMethod

Gets or sets the ScopingMethod.

SetNumber

Gets or sets the Set Number.

SolutionCombinationDriver

Gets or sets the SolutionCombinationDriver.

SolverComponentIDs

Gets or sets the SolverComponentIDs.

StressStrainType

Gets or sets the StressStrainType.

SubScopeBy

Gets or sets the SubScopeBy.

Substep

Gets the Substep.

Subtype

Gets or sets the Subtype.

Suppressed

Gets or sets the Suppressed.

Surface

Surface property.

SurfaceCoating

SurfaceCoating property.

SweepingPhase

Gets or sets the SweepingPhase.

ThroughThicknessBendingStress

Gets or sets the ThroughThicknessBendingStress.

Time

Gets the Time.

TimeForMaximumOfMaximumValues

Get the Time for the maximum of maximum values.

TimeForMaximumOfMinimumValues

Get the Time for the maximum of minimum values.

TimeForMinimumOfMaximumValues

Get the Time for the minimum of maximum values.

TimeForMinimumOfMinimumValues

Get the Time for the minimum of minimum values.

TotalCenter

Gets the TotalCenter.

TotalInside

Gets the TotalInside.

TotalOutside

Gets the TotalOutside.

VisibleProperties

Gets the list of properties that are visible for this object.

WaterfallShowTextOnMosaic

Gets or sets the Waterfall Mosaic Text Property.

Property detail#

property BendingStressEquivalent.Amplitude: bool | None#

Gets or sets the Amplitude.

property BendingStressEquivalent.Average: Ansys.Core.Units.Quantity | None#

Gets the Average.

property BendingStressEquivalent.AverageAcrossBodies: bool | None#

Gets or sets the AverageAcrossBodies.

property BendingStressEquivalent.AverageRadiusOfCurvature: Ansys.Core.Units.Quantity | None#

Gets or sets the AverageRadiusOfCurvature.

property BendingStressEquivalent.BendingInside: Ansys.Core.Units.Quantity | None#

Gets the BendingInside.

property BendingStressEquivalent.BendingOutside: Ansys.Core.Units.Quantity | None#

Gets the BendingOutside.

property BendingStressEquivalent.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None#

Gets or sets the By.

property BendingStressEquivalent.CalculateTimeHistory: bool | None#

Gets or sets the CalculateTimeHistory.

property BendingStressEquivalent.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets the list of children.

property BendingStressEquivalent.CombinationNumber: int | None#

Gets or sets the Combination Number for a Solution Combination result.

property BendingStressEquivalent.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#

Gets the list of associated comments.

property BendingStressEquivalent.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property BendingStressEquivalent.CrackFrontNumber: int | None#

Gets or sets the CrackFrontNumber.

property BendingStressEquivalent.CyclicMode: int | None#

Gets or sets the CyclicMode.

property BendingStressEquivalent.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#

Gets the current DataModelObject's category.

property BendingStressEquivalent.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None#

Gets or sets the DisplayOption.

property BendingStressEquivalent.DisplayTime: Ansys.Core.Units.Quantity | None#

Gets or sets the DisplayTime.

property BendingStressEquivalent.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None#

Gets or sets the DpfEvaluation.

property BendingStressEquivalent.EnvironmentSelection: Ansys.ACT.Automation.Mechanical.Analysis | None#

Gets or sets the EnvironmentSelection.

property BendingStressEquivalent.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#

Gets the list of associated figures.

property BendingStressEquivalent.Frequency: Ansys.Core.Units.Quantity | None#

Gets or sets the Frequency.

property BendingStressEquivalent.GlobalIDs: str | None#

Gets or sets the GlobalIDs.

property BendingStressEquivalent.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None#

Gets or sets the GraphControlsXAxis.

property BendingStressEquivalent.HarmonicIndex: int | None#

Gets or sets the HarmonicIndex.

property BendingStressEquivalent.Identifier: str | None#

Gets or sets the Identifier.

property BendingStressEquivalent.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#

Gets the list of associated images.

property BendingStressEquivalent.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None#

Gets the internal object. For advanced usage only.

property BendingStressEquivalent.IsSolved: bool | None#

Gets the IsSolved.

property BendingStressEquivalent.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None#

Gets or sets the ItemType.

property BendingStressEquivalent.IterationNumber: int | None#

Gets the IterationNumber.

property BendingStressEquivalent.IterationStep: int | None#

Gets or sets the IterationStep.

property BendingStressEquivalent.Layer: int | None#

Gets or sets the Layer.

property BendingStressEquivalent.Linearized2DBehavior: Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None#

Gets or sets the Linearized2DBehavior.

property BendingStressEquivalent.LoadMultiplier: float | None#

Gets the LoadMultiplier.

property BendingStressEquivalent.LoadStep: int | None#

Gets the LoadStep.

property BendingStressEquivalent.LoadStepForMaximumOfMaximumValues: int | None#

Get the Load Step for the maximum of maximum values.

property BendingStressEquivalent.LoadStepForMaximumOfMinimumValues: int | None#

Get the Load Step for the maximum of minimum values.

property BendingStressEquivalent.LoadStepForMinimumOfMaximumValues: int | None#

Get the Load Step for the minimum of maximum values.

property BendingStressEquivalent.LoadStepForMinimumOfMinimumValues: int | None#

Get the Load Step for the minimum of minimum values.

property BendingStressEquivalent.LoadStepNumber: int | None#

Gets or sets the LoadStepNumber.

property BendingStressEquivalent.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the Location.

property BendingStressEquivalent.Maximum: Ansys.Core.Units.Quantity | None#

Gets the Maximum.

property BendingStressEquivalent.MaximumOccursOn: str | None#

Gets the MaximumOccursOn.

property BendingStressEquivalent.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MaximumOfMaximumOverTime.

property BendingStressEquivalent.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MaximumOfMinimumOverTime.

property BendingStressEquivalent.Membrane: Ansys.Core.Units.Quantity | None#

Gets the Membrane.

property BendingStressEquivalent.MembraneBendingCenter: Ansys.Core.Units.Quantity | None#

Gets the MembraneBendingCenter.

property BendingStressEquivalent.MembraneBendingInside: Ansys.Core.Units.Quantity | None#

Gets the MembraneBendingInside.

property BendingStressEquivalent.MembraneBendingOutside: Ansys.Core.Units.Quantity | None#

Gets the MembraneBendingOutside.

property BendingStressEquivalent.Minimum: Ansys.Core.Units.Quantity | None#

Gets the Minimum.

property BendingStressEquivalent.MinimumOccursOn: str | None#

Gets the MinimumOccursOn.

property BendingStressEquivalent.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MinimumOfMaximumOverTime.

property BendingStressEquivalent.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MinimumOfMinimumOverTime.

property BendingStressEquivalent.Mode: int | None#

Gets or sets the Mode.

property BendingStressEquivalent.NamedSelections: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets or sets the NamedSelections.

property BendingStressEquivalent.NormalOrientation: Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None#

Gets or sets the NormalOrientation.

property BendingStressEquivalent.Path: Ansys.ACT.Automation.Mechanical.Path | None#

Path property.

property BendingStressEquivalent.PeakCenter: Ansys.Core.Units.Quantity | None#

Gets the PeakCenter.

property BendingStressEquivalent.PeakInside: Ansys.Core.Units.Quantity | None#

Gets the PeakInside.

property BendingStressEquivalent.PeakOutside: Ansys.Core.Units.Quantity | None#

Gets the PeakOutside.

property BendingStressEquivalent.PhaseIncrement: Ansys.Core.Units.Quantity | None#

Gets or sets the PhaseIncrement.

property BendingStressEquivalent.Plies: Iterable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None#

Plies property.

property BendingStressEquivalent.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None#

Gets the result table.

property BendingStressEquivalent.Ply: Iterable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None#

Gets or sets the Ply selection.

property BendingStressEquivalent.Position: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#

Gets or sets the Position.

property BendingStressEquivalent.Probability: float | None#

Gets the Probability.

property BendingStressEquivalent.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties for this object.

property BendingStressEquivalent.ReportedFrequency: Ansys.Core.Units.Quantity | None#

Gets the ReportedFrequency.

property BendingStressEquivalent.ScaleFactor: Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None#

Gets or sets the ScaleFactor.

property BendingStressEquivalent.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#

Gets or sets the ScopingMethod.

property BendingStressEquivalent.SetNumber: int | None#

Gets or sets the Set Number.

property BendingStressEquivalent.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None#

Gets or sets the SolutionCombinationDriver.

property BendingStressEquivalent.SolverComponentIDs: str | None#

Gets or sets the SolverComponentIDs.

property BendingStressEquivalent.StressStrainType: Ansys.Mechanical.DataModel.Enums.StressStrainType | None#

Gets or sets the StressStrainType.

property BendingStressEquivalent.SubScopeBy: Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None#

Gets or sets the SubScopeBy.

property BendingStressEquivalent.Substep: int | None#

Gets the Substep.

property BendingStressEquivalent.Subtype: Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None#

Gets or sets the Subtype.

property BendingStressEquivalent.Suppressed: bool | None#

Gets or sets the Suppressed.

property BendingStressEquivalent.Surface: Ansys.ACT.Automation.Mechanical.Surface | None#

Surface property.

property BendingStressEquivalent.SurfaceCoating: Ansys.ACT.Automation.Mechanical.SurfaceCoating | None#

SurfaceCoating property.

property BendingStressEquivalent.SweepingPhase: Ansys.Core.Units.Quantity | None#

Gets or sets the SweepingPhase.

property BendingStressEquivalent.ThroughThicknessBendingStress: Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None#

Gets or sets the ThroughThicknessBendingStress.

property BendingStressEquivalent.Time: Ansys.Core.Units.Quantity | None#

Gets the Time.

property BendingStressEquivalent.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the maximum of maximum values.

property BendingStressEquivalent.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the maximum of minimum values.

property BendingStressEquivalent.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the minimum of maximum values.

property BendingStressEquivalent.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the minimum of minimum values.

property BendingStressEquivalent.TotalCenter: Ansys.Core.Units.Quantity | None#

Gets the TotalCenter.

property BendingStressEquivalent.TotalInside: Ansys.Core.Units.Quantity | None#

Gets the TotalInside.

property BendingStressEquivalent.TotalOutside: Ansys.Core.Units.Quantity | None#

Gets the TotalOutside.

property BendingStressEquivalent.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties that are visible for this object.

property BendingStressEquivalent.WaterfallShowTextOnMosaic: bool | None#

Gets or sets the Waterfall Mosaic Text Property.

Method detail#

BendingStressEquivalent.Activate() None#

Activate the current object.

BendingStressEquivalent.AddAlert() Ansys.ACT.Automation.Mechanical.Results.Alert#

Creates a new Alert

BendingStressEquivalent.AddComment() Ansys.ACT.Automation.Mechanical.Comment#

Creates a new child Comment.

BendingStressEquivalent.AddConvergence() Ansys.ACT.Automation.Mechanical.Results.Convergence#

Creates a new Convergence

BendingStressEquivalent.AddFigure() Ansys.ACT.Automation.Mechanical.Figure#

Creates a new child Figure.

BendingStressEquivalent.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image#
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
BendingStressEquivalent.ClearGeneratedData() None#

Run the ClearGeneratedData action.

BendingStressEquivalent.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None#

Copies all visible properties from this object to another.

BendingStressEquivalent.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

CreateParameter method.

BendingStressEquivalent.CreateResultsAtAllSets() List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]#

Creates results at all sets for results under a solution.

BendingStressEquivalent.Delete() None#

Run the Delete action.

BendingStressEquivalent.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Creates a copy of the current DataModelObject.

BendingStressEquivalent.DuplicateWithoutResults() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Run the DuplicateWithoutResults action.

BendingStressEquivalent.EvaluateAllResults() None#

Run the EvaluateAllResults action.

BendingStressEquivalent.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) None#

Run the ExportAnimation action.

BendingStressEquivalent.ExportToTextFile(filePath: str) None#

Run the ExportToTextFile action.

BendingStressEquivalent.FetchRemoteResults() None#

Run the FetchRemoteResult action.

BendingStressEquivalent.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType]#

Gets the list of children, filtered by type.

BendingStressEquivalent.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Gets the parameter corresponding to the given property.

BendingStressEquivalent.GroupAllSimilarChildren() None#

Run the GroupAllSimilarChildren action.

BendingStressEquivalent.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#

Run the GroupSimilarObjects action.

BendingStressEquivalent.PromoteToNamedSelection() Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]#

Run the PromoteToNamedSelection action.

BendingStressEquivalent.PropertyByAPIName(name: str) Ansys.ACT.Automation.Mechanical.Property#
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
BendingStressEquivalent.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property#

Get a property by its unique name.

BendingStressEquivalent.RemoveParameter(propName: str) None#

Removes the parameter from the parameter set corresponding to the given property.

BendingStressEquivalent.RenameBasedOnDefinition() None#

Run the RenameBasedOnDefinition action.