`MiddlePrincipalStress`#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Results.StressResults.MiddlePrincipalStress#

Bases: object

Defines a MiddlePrincipalStress.

Overview#

Methods

`Activate`	Activate the current object.
`AddAlert`	Creates a new Alert
`AddComment`	Creates a new child Comment.
`AddConvergence`	Creates a new Convergence
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`ClearGeneratedData`	Run the ClearGeneratedData action.
`CopyTo`	Copies all visible properties from this object to another.
`CreateParameter`	CreateParameter method.
`CreateResultsAtAllSets`	Creates results at all sets for results under a solution.
`Delete`	Run the Delete action.
`Duplicate`	Creates a copy of the current DataModelObject.
`DuplicateWithoutResults`	Run the DuplicateWithoutResults action.
`EvaluateAllResults`	Run the EvaluateAllResults action.
`ExportAnimation`	Run the ExportAnimation action.
`ExportToTextFile`	Run the ExportToTextFile action.
`FetchRemoteResults`	Run the FetchRemoteResult action.
`GetChildren`	Gets the list of children, filtered by type.
`GetParameter`	Gets the parameter corresponding to the given property.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PromoteToNamedSelection`	Run the PromoteToNamedSelection action.
`PropertyByAPIName`	Get a property by its API name.
`PropertyByName`	Get a property by its unique name.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.
`RenameBasedOnDefinition`	Run the RenameBasedOnDefinition action.

Properties

`Amplitude`	Gets or sets the Amplitude.
`Average`	Gets the Average.
`AverageAcrossBodies`	Gets or sets the AverageAcrossBodies.
`AverageRadiusOfCurvature`	Gets or sets the AverageRadiusOfCurvature.
`BendingInside`	Gets the BendingInside.
`BendingOutside`	Gets the BendingOutside.
`By`	Gets or sets the By.
`CalculateTimeHistory`	Gets or sets the CalculateTimeHistory.
`Children`	Gets the list of children.
`CombinationNumber`	Gets or sets the Combination Number for a Solution Combination result.
`Comments`	Gets the list of associated comments.
`CoordinateSystem`	Gets or sets the Coordinate System.
`CrackFrontNumber`	Gets or sets the CrackFrontNumber.
`CyclicMode`	Gets or sets the CyclicMode.
`DataModelObjectCategory`	Gets the current DataModelObject's category.
`DisplayOption`	Gets or sets the DisplayOption.
`DisplayTime`	Gets or sets the DisplayTime.
`DpfEvaluation`	Gets or sets the DpfEvaluation.
`EnvironmentSelection`	Gets or sets the EnvironmentSelection.
`Figures`	Gets the list of associated figures.
`Frequency`	Gets or sets the Frequency.
`GlobalIDs`	Gets or sets the GlobalIDs.
`GraphControlsXAxis`	Gets or sets the GraphControlsXAxis.
`HarmonicIndex`	Gets or sets the HarmonicIndex.
`Identifier`	Gets or sets the Identifier.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`IsSolved`	Gets the IsSolved.
`ItemType`	Gets or sets the ItemType.
`IterationNumber`	Gets the IterationNumber.
`IterationStep`	Gets or sets the IterationStep.
`Layer`	Gets or sets the Layer.
`Linearized2DBehavior`	Gets or sets the Linearized2DBehavior.
`LoadMultiplier`	Gets the LoadMultiplier.
`LoadStep`	Gets the LoadStep.
`LoadStepForMaximumOfMaximumValues`	Get the Load Step for the maximum of maximum values.
`LoadStepForMaximumOfMinimumValues`	Get the Load Step for the maximum of minimum values.
`LoadStepForMinimumOfMaximumValues`	Get the Load Step for the minimum of maximum values.
`LoadStepForMinimumOfMinimumValues`	Get the Load Step for the minimum of minimum values.
`LoadStepNumber`	Gets or sets the LoadStepNumber.
`Location`	Gets or sets the Location.
`Maximum`	Gets the Maximum.
`MaximumOccursOn`	Gets the MaximumOccursOn.
`MaximumOfMaximumOverTime`	Gets the MaximumOfMaximumOverTime.
`MaximumOfMinimumOverTime`	Gets the MaximumOfMinimumOverTime.
`Membrane`	Gets the Membrane.
`MembraneBendingCenter`	Gets the MembraneBendingCenter.
`MembraneBendingInside`	Gets the MembraneBendingInside.
`MembraneBendingOutside`	Gets the MembraneBendingOutside.
`Minimum`	Gets the Minimum.
`MinimumOccursOn`	Gets the MinimumOccursOn.
`MinimumOfMaximumOverTime`	Gets the MinimumOfMaximumOverTime.
`MinimumOfMinimumOverTime`	Gets the MinimumOfMinimumOverTime.
`Mode`	Gets or sets the Mode.
`NamedSelections`	Gets or sets the NamedSelections.
`NormalOrientation`	Gets or sets the NormalOrientation.
`Path`	Path property.
`PeakCenter`	Gets the PeakCenter.
`PeakInside`	Gets the PeakInside.
`PeakOutside`	Gets the PeakOutside.
`PhaseIncrement`	Gets or sets the PhaseIncrement.
`Plies`	Plies property.
`PlotData`	Gets the result table.
`Ply`	Gets or sets the Ply selection.
`Position`	Gets or sets the Position.
`Probability`	Gets the Probability.
`Properties`	Gets the list of properties for this object.
`ReportedFrequency`	Gets the ReportedFrequency.
`ScaleFactor`	Gets or sets the ScaleFactor.
`ScopingMethod`	Gets or sets the ScopingMethod.
`SetNumber`	Gets or sets the Set Number.
`SolutionCombinationDriver`	Gets or sets the SolutionCombinationDriver.
`SolverComponentIDs`	Gets or sets the SolverComponentIDs.
`StressStrainType`	Gets or sets the StressStrainType.
`SubScopeBy`	Gets or sets the SubScopeBy.
`Substep`	Gets the Substep.
`Subtype`	Gets or sets the Subtype.
`Suppressed`	Gets or sets the Suppressed.
`Surface`	Surface property.
`SurfaceCoating`	SurfaceCoating property.
`SweepingPhase`	Gets or sets the SweepingPhase.
`ThroughThicknessBendingStress`	Gets or sets the ThroughThicknessBendingStress.
`Time`	Gets the Time.
`TimeForMaximumOfMaximumValues`	Get the Time for the maximum of maximum values.
`TimeForMaximumOfMinimumValues`	Get the Time for the maximum of minimum values.
`TimeForMinimumOfMaximumValues`	Get the Time for the minimum of maximum values.
`TimeForMinimumOfMinimumValues`	Get the Time for the minimum of minimum values.
`TotalCenter`	Gets the TotalCenter.
`TotalInside`	Gets the TotalInside.
`TotalOutside`	Gets the TotalOutside.
`VisibleProperties`	Gets the list of properties that are visible for this object.
`WaterfallShowTextOnMosaic`	Gets or sets the Waterfall Mosaic Text Property.

Property detail#

property MiddlePrincipalStress.Amplitude: bool | None#: Gets or sets the Amplitude.

property MiddlePrincipalStress.Average: Ansys.Core.Units.Quantity | None#: Gets the Average.

property MiddlePrincipalStress.AverageAcrossBodies: bool | None#: Gets or sets the AverageAcrossBodies.

property MiddlePrincipalStress.AverageRadiusOfCurvature: Ansys.Core.Units.Quantity | None#: Gets or sets the AverageRadiusOfCurvature.

property MiddlePrincipalStress.BendingInside: Ansys.Core.Units.Quantity | None#: Gets the BendingInside.

property MiddlePrincipalStress.BendingOutside: Ansys.Core.Units.Quantity | None#: Gets the BendingOutside.

property MiddlePrincipalStress.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None#: Gets or sets the By.

property MiddlePrincipalStress.CalculateTimeHistory: bool | None#: Gets or sets the CalculateTimeHistory.

property MiddlePrincipalStress.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets the list of children.

property MiddlePrincipalStress.CombinationNumber: int | None#: Gets or sets the Combination Number for a Solution Combination result.

property MiddlePrincipalStress.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#: Gets the list of associated comments.

property MiddlePrincipalStress.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#: Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property MiddlePrincipalStress.CrackFrontNumber: int | None#: Gets or sets the CrackFrontNumber.

property MiddlePrincipalStress.CyclicMode: int | None#: Gets or sets the CyclicMode.

property MiddlePrincipalStress.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#: Gets the current DataModelObject's category.

property MiddlePrincipalStress.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None#: Gets or sets the DisplayOption.

property MiddlePrincipalStress.DisplayTime: Ansys.Core.Units.Quantity | None#: Gets or sets the DisplayTime.

property MiddlePrincipalStress.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None#: Gets or sets the DpfEvaluation.

property MiddlePrincipalStress.EnvironmentSelection: Ansys.ACT.Automation.Mechanical.Analysis | None#: Gets or sets the EnvironmentSelection.

property MiddlePrincipalStress.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#: Gets the list of associated figures.

property MiddlePrincipalStress.Frequency: Ansys.Core.Units.Quantity | None#: Gets or sets the Frequency.

property MiddlePrincipalStress.GlobalIDs: str | None#: Gets or sets the GlobalIDs.

property MiddlePrincipalStress.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None#: Gets or sets the GraphControlsXAxis.

property MiddlePrincipalStress.HarmonicIndex: int | None#: Gets or sets the HarmonicIndex.

property MiddlePrincipalStress.Identifier: str | None#: Gets or sets the Identifier.

property MiddlePrincipalStress.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#: Gets the list of associated images.

property MiddlePrincipalStress.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None#: Gets the internal object. For advanced usage only.

property MiddlePrincipalStress.IsSolved: bool | None#: Gets the IsSolved.

property MiddlePrincipalStress.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None#: Gets or sets the ItemType.

property MiddlePrincipalStress.IterationNumber: int | None#: Gets the IterationNumber.

property MiddlePrincipalStress.IterationStep: int | None#: Gets or sets the IterationStep.

property MiddlePrincipalStress.Layer: int | None#: Gets or sets the Layer.

property MiddlePrincipalStress.Linearized2DBehavior: Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None#: Gets or sets the Linearized2DBehavior.

property MiddlePrincipalStress.LoadMultiplier: float | None#: Gets the LoadMultiplier.

property MiddlePrincipalStress.LoadStep: int | None#: Gets the LoadStep.

property MiddlePrincipalStress.LoadStepForMaximumOfMaximumValues: int | None#: Get the Load Step for the maximum of maximum values.

property MiddlePrincipalStress.LoadStepForMaximumOfMinimumValues: int | None#: Get the Load Step for the maximum of minimum values.

property MiddlePrincipalStress.LoadStepForMinimumOfMaximumValues: int | None#: Get the Load Step for the minimum of maximum values.

property MiddlePrincipalStress.LoadStepForMinimumOfMinimumValues: int | None#: Get the Load Step for the minimum of minimum values.

property MiddlePrincipalStress.LoadStepNumber: int | None#: Gets or sets the LoadStepNumber.

property MiddlePrincipalStress.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#: Gets or sets the Location.

property MiddlePrincipalStress.Maximum: Ansys.Core.Units.Quantity | None#: Gets the Maximum.

property MiddlePrincipalStress.MaximumOccursOn: str | None#: Gets the MaximumOccursOn.

property MiddlePrincipalStress.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MaximumOfMaximumOverTime.

property MiddlePrincipalStress.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MaximumOfMinimumOverTime.

property MiddlePrincipalStress.Membrane: Ansys.Core.Units.Quantity | None#: Gets the Membrane.

property MiddlePrincipalStress.MembraneBendingCenter: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingCenter.

property MiddlePrincipalStress.MembraneBendingInside: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingInside.

property MiddlePrincipalStress.MembraneBendingOutside: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingOutside.

property MiddlePrincipalStress.Minimum: Ansys.Core.Units.Quantity | None#: Gets the Minimum.

property MiddlePrincipalStress.MinimumOccursOn: str | None#: Gets the MinimumOccursOn.

property MiddlePrincipalStress.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MinimumOfMaximumOverTime.

property MiddlePrincipalStress.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MinimumOfMinimumOverTime.

property MiddlePrincipalStress.Mode: int | None#: Gets or sets the Mode.

property MiddlePrincipalStress.NamedSelections: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets or sets the NamedSelections.

property MiddlePrincipalStress.NormalOrientation: Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None#: Gets or sets the NormalOrientation.

property MiddlePrincipalStress.Path: Ansys.ACT.Automation.Mechanical.Path | None#: Path property.

property MiddlePrincipalStress.PeakCenter: Ansys.Core.Units.Quantity | None#: Gets the PeakCenter.

property MiddlePrincipalStress.PeakInside: Ansys.Core.Units.Quantity | None#: Gets the PeakInside.

property MiddlePrincipalStress.PeakOutside: Ansys.Core.Units.Quantity | None#: Gets the PeakOutside.

property MiddlePrincipalStress.PhaseIncrement: Ansys.Core.Units.Quantity | None#: Gets or sets the PhaseIncrement.

property MiddlePrincipalStress.Plies: Iterable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None#: Plies property.

property MiddlePrincipalStress.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None#: Gets the result table.

property MiddlePrincipalStress.Ply: Iterable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None#: Gets or sets the Ply selection.

property MiddlePrincipalStress.Position: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#: Gets or sets the Position.

property MiddlePrincipalStress.Probability: float | None#: Gets the Probability.

property MiddlePrincipalStress.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties for this object.

property MiddlePrincipalStress.ReportedFrequency: Ansys.Core.Units.Quantity | None#: Gets the ReportedFrequency.

property MiddlePrincipalStress.ScaleFactor: Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None#: Gets or sets the ScaleFactor.

property MiddlePrincipalStress.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#: Gets or sets the ScopingMethod.

property MiddlePrincipalStress.SetNumber: int | None#: Gets or sets the Set Number.

property MiddlePrincipalStress.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None#: Gets or sets the SolutionCombinationDriver.

property MiddlePrincipalStress.SolverComponentIDs: str | None#: Gets or sets the SolverComponentIDs.

property MiddlePrincipalStress.StressStrainType: Ansys.Mechanical.DataModel.Enums.StressStrainType | None#: Gets or sets the StressStrainType.

property MiddlePrincipalStress.SubScopeBy: Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None#: Gets or sets the SubScopeBy.

property MiddlePrincipalStress.Substep: int | None#: Gets the Substep.

property MiddlePrincipalStress.Subtype: Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None#: Gets or sets the Subtype.

property MiddlePrincipalStress.Suppressed: bool | None#: Gets or sets the Suppressed.

property MiddlePrincipalStress.Surface: Ansys.ACT.Automation.Mechanical.Surface | None#: Surface property.

property MiddlePrincipalStress.SurfaceCoating: Ansys.ACT.Automation.Mechanical.SurfaceCoating | None#: SurfaceCoating property.

property MiddlePrincipalStress.SweepingPhase: Ansys.Core.Units.Quantity | None#: Gets or sets the SweepingPhase.

property MiddlePrincipalStress.ThroughThicknessBendingStress: Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None#: Gets or sets the ThroughThicknessBendingStress.

property MiddlePrincipalStress.Time: Ansys.Core.Units.Quantity | None#: Gets the Time.

property MiddlePrincipalStress.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the maximum of maximum values.

property MiddlePrincipalStress.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the maximum of minimum values.

property MiddlePrincipalStress.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the minimum of maximum values.

property MiddlePrincipalStress.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the minimum of minimum values.

property MiddlePrincipalStress.TotalCenter: Ansys.Core.Units.Quantity | None#: Gets the TotalCenter.

property MiddlePrincipalStress.TotalInside: Ansys.Core.Units.Quantity | None#: Gets the TotalInside.

property MiddlePrincipalStress.TotalOutside: Ansys.Core.Units.Quantity | None#: Gets the TotalOutside.

property MiddlePrincipalStress.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties that are visible for this object.

property MiddlePrincipalStress.WaterfallShowTextOnMosaic: bool | None#: Gets or sets the Waterfall Mosaic Text Property.

Method detail#

MiddlePrincipalStress.Activate() → None#: Activate the current object.

MiddlePrincipalStress.AddAlert() → Ansys.ACT.Automation.Mechanical.Results.Alert#: Creates a new Alert

MiddlePrincipalStress.AddComment() → Ansys.ACT.Automation.Mechanical.Comment#: Creates a new child Comment.

MiddlePrincipalStress.AddConvergence() → Ansys.ACT.Automation.Mechanical.Results.Convergence#: Creates a new Convergence

MiddlePrincipalStress.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure#: Creates a new child Figure.

MiddlePrincipalStress.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image#

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

MiddlePrincipalStress.ClearGeneratedData() → None#: Run the ClearGeneratedData action.

MiddlePrincipalStress.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None#: Copies all visible properties from this object to another.

MiddlePrincipalStress.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: CreateParameter method.

MiddlePrincipalStress.CreateResultsAtAllSets() → List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]#: Creates results at all sets for results under a solution.

MiddlePrincipalStress.Delete() → None#: Run the Delete action.

MiddlePrincipalStress.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Creates a copy of the current DataModelObject.

MiddlePrincipalStress.DuplicateWithoutResults() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Run the DuplicateWithoutResults action.

MiddlePrincipalStress.EvaluateAllResults() → None#: Run the EvaluateAllResults action.

MiddlePrincipalStress.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None#: Run the ExportAnimation action.

MiddlePrincipalStress.ExportToTextFile(filePath: str) → None#: Run the ExportToTextFile action.

MiddlePrincipalStress.FetchRemoteResults() → None#: Run the FetchRemoteResult action.

MiddlePrincipalStress.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]#: Gets the list of children, filtered by type.

MiddlePrincipalStress.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: Gets the parameter corresponding to the given property.

MiddlePrincipalStress.GroupAllSimilarChildren() → None#: Run the GroupAllSimilarChildren action.

MiddlePrincipalStress.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#: Run the GroupSimilarObjects action.

MiddlePrincipalStress.PromoteToNamedSelection() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]#: Run the PromoteToNamedSelection action.

MiddlePrincipalStress.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property#

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MiddlePrincipalStress.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property#: Get a property by its unique name.

MiddlePrincipalStress.RemoveParameter(propName: str) → None#: Removes the parameter from the parameter set corresponding to the given property.

MiddlePrincipalStress.RenameBasedOnDefinition() → None#: Run the RenameBasedOnDefinition action.