Mesh
#
- class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.MeshControls.Mesh#
Bases:
object
Defines a Mesh.
Overview#
Activate the current object. |
|
ActivateAllSolidSurfaceWorksheetRows method. |
|
ActivateAllSurfaceWorksheetRows method. |
|
ActivateAllVolumeWorksheetRows method. |
|
Creates a new AutomaticMethod |
|
Creates a new child Comment. |
|
Creates a new Connect Control |
|
Add a new AddContactMatchGroup. |
|
Creates a new ContactSizing |
|
Creates a new SagControl |
|
Add a new DirectMorph. |
|
Creates a new FaceMeshing |
|
Creates a new FeatureSuppress |
|
Creates a new child Figure. |
|
Creates a new GeometryFidelity |
|
Creates a new child Image. |
|
Creates a new Inflation |
|
Add a new ManualMeshConnection |
|
Creates a new MatchControl |
|
Add a new MeshConnectionGroup. |
|
Creates a new MeshCopy |
|
Adds Mesh Layers when contour enabled in Mesh Quality Workhseet mode. |
|
Add a new NodeMerge. |
|
Add a new NodeMergeGroup. |
|
Creates a new Pinch |
|
Add a new Pull (Extrude). |
|
Add a new Pull (Revolve). |
|
Add a new Pull (Surface Coating)). |
|
Creates a new Refinement |
|
Creates a new RepairTopology |
|
Creates a new Sizing |
|
Creates a new TopologySuppressControl |
|
Creates a new SagControl |
|
Creates a new WeldControl |
|
Clear generated data for parts and/or bodies provided. |
|
Run the ClearGeneratedData action. |
|
Copies all visible properties from this object to another. |
|
Create Mesh Quality SolidSurface Element Name Selection |
|
Create Mesh Quality Surface Element Named Selection |
|
Create Mesh Quality Volume Element Name Selection |
|
Creates a new parameter for a Property. |
|
Run the CreatePinchControls action. |
|
DeactivateAllSolidSurfaceWorksheetRows method. |
|
DeactivateAllSurfaceWorksheetRows method. |
|
DeactivateAllVolumeWorksheetRows method. |
|
Creates a copy of the current DataModelObject. |
|
Export the weld definition file to the specified location. |
|
Run the GenerateMesh action. |
|
Get Active User Mesh Quality |
|
Gets the list of children, filtered by type. |
|
Get Shell Target Metric |
|
Get SolidSurface Target Metric |
|
Get Solid Target Metric |
|
GetMeshMetricOptions method. |
|
Gets the parameter corresponding to the given property. |
|
GetSolidSurfaceMeshMetrics method. |
|
Get Mesh Quality Average Metric Value |
|
Get Mesh Quality Count Failed |
|
Get Mesh Quality Error Limit |
|
Get Mesh Quality Name |
|
Get Mesh Quality Percentage Failed |
|
Get Mesh Quality Warning Count Failed |
|
Get Mesh Quality Warning Limit |
|
Get Mesh Quality Warning Percentage Failed |
|
Get Mesh Quality Worst Metric BackgroundColor |
|
Get Mesh Quality Worst Metric Value |
|
Get Mesh Quality Average Metric Value |
|
Get Mesh Quality Count Failed |
|
Get User Mesh Quality Error Limit |
|
Get Mesh Quality Name |
|
Get Mesh Quality Percentage Failed |
|
Get Mesh Quality Warning Count Failed |
|
Get User Mesh Quality Warning Limit |
|
Get Mesh Quality Warning Percentage Failed |
|
Get Mesh Quality Worst Metric Value |
|
GetVolumeMeshMetrics method. |
|
Get Mesh Quality Average Metric Value |
|
Get Mesh Quality Count Failed |
|
Get Mesh Quality Error Limit |
|
Get Mesh Quality Name |
|
Get Mesh Quality Percentage Failed |
|
Get Mesh Quality Warning Count Failed |
|
Get Mesh Quality Warning Limit |
|
Get Mesh Quality Warning Percentage Failed |
|
Get Mesh Quality Worst Metric BackgroundColor |
|
Get Mesh Quality Worst Metric Value |
|
Run the GroupAllSimilarChildren action. |
|
Run the GroupSimilarObjects action. |
|
IsMeshMetricVisible method. |
|
LoadMQWorksheetFile method. |
|
Set the geometry type for the Pinch Control. |
|
Run the PreviewInflation action. |
|
Preview model mesh on all weld controls of the Mesh. |
|
Preview model mesh on one weld control provided. |
|
PreviewMeshOnWeldWorksheet method. |
|
PreviewMeshOnWelds method. |
|
Run the PreviewSurfaceMesh action. |
|
Preview Welds. |
|
Get a property by its API name. |
|
Get a property by its unique name. |
|
Removes Mesh Layers when contour enabled in Mesh Quality Workhseet mode. |
|
Removes the parameter from the parameter set corresponding to the given property. |
|
SaveMQWorksheetFile method. |
|
Set Active Mesh Quality |
|
Set Active Mesh Quality |
|
Set Active Mesh Quality |
|
SetMeshMetricOptions method. |
|
SetSolidMeshMetricLimits method. |
|
SetSolidSurfaceMeshMetricLimits method. |
|
Set Mesh Quality Error Limit |
|
Set Mesh Quality Warning Limit |
|
SetSurfaceMeshMetricLimits method. |
|
Set Mesh Quality Error Level |
|
Set Mesh Quality Warning Limit |
|
Set Mesh Quality Error Limit |
|
Set Mesh Quality Warning Limit |
|
Run the ShowFeatureSuppressibleFaces action. |
|
Run the ShowMappableBodies action. |
|
Run the ShowOverlappingFaces action. |
|
Run the ShowSweepableBodies action. |
|
Run the ShowUnconnectedFreeEdges action. |
|
Run the Update action. |
Gets or sets the AspectRatio. |
|
Gets or sets the AutomaticMeshBasedDefeaturing. |
|
Gets the Average. |
|
Gets the Beam3. |
|
Gets the Beam4. |
|
Gets the BeamElements. |
|
Gets or sets the CaptureCurvature. |
|
Gets or sets the CaptureProximity. |
|
Gets or sets the CheckMeshQuality. |
|
Gets the list of children. |
|
Gets or sets the CollisionAvoidance. |
|
Gets the list of associated comments. |
|
Gets or sets the ConnectionSize. |
|
Gets or sets the ConnectionTolerance. |
|
Gets or sets the ConnectionToleranceList. |
|
Gets or sets the CoplanarAngleTol. |
|
Gets the CornerNodes. |
|
Gets the Assembly Mesh's current configuration Id. |
|
Gets or sets the CurvatureNormalAngle. |
|
Gets the current DataModelObject's category. |
|
Gets or sets the DefeatureTolerance. |
|
Gets or sets the DisplayStyle. |
|
Gets or sets the ElementOrder. |
|
Gets or sets the ElementSize. |
|
Gets the Elements. |
|
Gets or sets the ExportFormat. |
|
Gets or sets the ExportUnit. |
|
Gets or sets the ExtraRetriesForAssembly. |
|
Gets the list of associated figures. |
|
Gets or sets the FilletRatio. |
|
Gets or sets the FirstLayerHeight. |
|
Gets or Sets the Gap factor for Global Inflation |
|
Gets the GasketElements. |
|
Gets or sets the GeneratePinchOnRefresh. |
|
Gets or sets the GlobalUseCustomTargetLimit. |
|
Gets or sets the GrowthRate. |
|
Gets or sets the GrowthRateSF. |
|
Gets or sets the GrowthRateType. |
|
Gets the Hex20. |
|
Gets the Hex8. |
|
Gets or sets the HoleRemovalTolerance. |
|
Gets the list of associated images. |
|
Gets or sets the InflationAlgorithm. |
|
Gets or Sets the InflationElementType |
|
Gets or sets the InflationOption. |
|
Gets or sets the InitialSizeSeed. |
|
Gets the internal object. For advanced usage only. |
|
Gets the Line2. |
|
Gets the Line3. |
|
Gets the Maximum. |
|
Gets or sets the MaximumAngle. |
|
Gets or sets the MaximumHeightOverBase. |
|
Gets or sets the MaximumLayers. |
|
Gets or sets the MaximumSize. |
|
Gets or sets the MaximumThickness. |
|
Gets or sets the MeshBasedConnection. |
|
Gets or sets the MeshMetric. |
|
Gets or sets the MeshMorphing. |
|
Gets or sets the Method. |
|
Gets the MidNodes. |
|
Gets or sets the TriangleReduction option for Batch Connections. |
|
Gets the Minimum. |
|
Gets the MinimumEdgeLength. |
|
Gets or sets the MinimumSize. |
|
Gets or sets the MultiConnectionSteps. |
|
Gets or sets the NamedSelection. |
|
Gets the Nodes. |
|
Gets or Sets the Number of Layers of Global Inflation |
|
Gets or sets the NumberOfCPUsForParallelPartMeshing. |
|
Gets or sets the NumberOfRetries. |
|
Gets the number of Mesh Quality Metrics |
|
Gets the OrientationNodes. |
|
Gets or sets the PhysicsPreference. |
|
Gets or sets the PinchTolerance. |
|
Gets the list of properties for this object. |
|
Gets or sets the ProximityGapFactor. |
|
Gets or sets the ProximityMinimumSize. |
|
Gets or sets the ProximitySizeSources. |
|
Gets the Pyramid13. |
|
Gets the Pyramid5. |
|
Gets the Quad4. |
|
Gets the Quad8. |
|
Gets or sets the QuadMesh. |
|
Gets the ReadOnly. |
|
Gets or sets the Relevance. |
|
Gets or sets the RelevanceCenter. |
|
Gets or sets the Resolution. |
|
Gets or sets the BoundaryCondition. |
|
Gets or sets the RigidBodyFaceMeshType. |
|
Gets or sets the ShapeChecking. |
|
Gets the SharedNodes. |
|
Gets or sets the SheetLoopRemoval. |
|
Gets the ShellElements. |
|
Gets or sets the ShowDetailedStatistics. |
|
Gets or sets the Smoothing. |
|
Gets or sets the SmoothingIterations. |
|
Gets the SolidElements. |
|
Gets the SolidShellElements. |
|
Gets or sets the SolverPreference. |
|
Gets or sets the SpanAngleCenter. |
|
Gets the StandardDeviation. |
|
Gets or sets the StraightSidedElements. |
|
Gets or sets the TargetCharacteristicLength. |
|
Gets or sets the TargetExplicitAspectRatio. |
|
Gets or sets the TargetQuality. |
|
Gets or sets the TargetSkewness. |
|
Gets the Tet10. |
|
Gets the Tet4. |
|
Gets or sets the TopologyChecking. |
|
Gets or sets the TransitionOption. |
|
Gets or sets the TransitionRatio. |
|
Gets the Tri3. |
|
Gets the Tri6. |
|
Gets or sets the TriangleSurfaceMesher. |
|
Gets or sets the UseAdaptiveSizing. |
|
Gets or sets the UseAdvancedSizeFunction. |
|
Gets or sets the UseAutomaticInflation. |
|
Gets or sets the UseFixedSizeFunctionForSheets. |
|
Gets or sets the UsePostSmoothing. |
|
Gets or sets the UseSheetThicknessForPinch. |
|
Gets or sets the ViewAdvancedOptions. |
|
Gets the list of properties that are visible for this object. |
|
Gets the Wedge15. |
|
Gets the Wedge6. |
|
Get the MeshControlWorksheet action. |
Property detail#
- property Mesh.AutomaticMeshBasedDefeaturing: int | None#
Gets or sets the AutomaticMeshBasedDefeaturing.
- property Mesh.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#
Gets the list of children.
- property Mesh.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#
Gets the list of associated comments.
- property Mesh.CoplanarAngleTol: Ansys.Core.Units.Quantity | None#
Gets or sets the CoplanarAngleTol.
- property Mesh.CurvatureNormalAngle: Ansys.Core.Units.Quantity | None#
Gets or sets the CurvatureNormalAngle.
- property Mesh.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#
Gets the current DataModelObject's category.
- property Mesh.DefeatureTolerance: Ansys.Core.Units.Quantity | None#
Gets or sets the DefeatureTolerance.
- property Mesh.DisplayStyle: Ansys.Mechanical.DataModel.Enums.MeshDisplayStyle | None#
Gets or sets the DisplayStyle.
- property Mesh.ElementOrder: Ansys.Mechanical.DataModel.Enums.ElementOrder | None#
Gets or sets the ElementOrder.
- property Mesh.ExportFormat: Ansys.Mechanical.DataModel.Enums.FluentExportMeshType | None#
Gets or sets the ExportFormat.
- property Mesh.ExportUnit: Ansys.Mechanical.DataModel.Enums.PolyflowExportUnit | None#
Gets or sets the ExportUnit.
- property Mesh.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#
Gets the list of associated figures.
- property Mesh.FirstLayerHeight: Ansys.Core.Units.Quantity | None#
Gets or sets the FirstLayerHeight.
- property Mesh.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#
Gets the list of associated images.
- property Mesh.InflationElementType: Ansys.Mechanical.DataModel.Enums.MeshInflationElementType | None#
Gets or Sets the InflationElementType
- property Mesh.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlGroupAuto | None#
Gets the internal object. For advanced usage only.
- property Mesh.MaximumThickness: Ansys.Core.Units.Quantity | None#
Gets or sets the MaximumThickness.
- property Mesh.MeshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType | None#
Gets or sets the MeshMetric.
- property Mesh.MinimizeNumTriangles: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None#
Gets or sets the TriangleReduction option for Batch Connections.
- property Mesh.NamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None#
Gets or sets the NamedSelection.
- property Mesh.NumberOfCPUsForParallelPartMeshing: int | None#
Gets or sets the NumberOfCPUsForParallelPartMeshing.
- property Mesh.PhysicsPreference: Ansys.Mechanical.DataModel.Enums.MeshPhysicsPreferenceType | None#
Gets or sets the PhysicsPreference.
- property Mesh.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties for this object.
- property Mesh.ProximityMinimumSize: Ansys.Core.Units.Quantity | None#
Gets or sets the ProximityMinimumSize.
- property Mesh.ProximitySizeSources: Ansys.Mechanical.DataModel.Enums.ProximitySFSourcesType | None#
Gets or sets the ProximitySizeSources.
- property Mesh.RigidBodyBehavior: Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyBehaviorType | None#
Gets or sets the BoundaryCondition.
- property Mesh.RigidBodyFaceMeshType: Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyFaceMeshType | None#
Gets or sets the RigidBodyFaceMeshType.
Gets the SharedNodes.
- property Mesh.SolverPreference: Ansys.Mechanical.DataModel.Enums.MeshSolverPreferenceType | None#
Gets or sets the SolverPreference.
- property Mesh.TargetCharacteristicLength: Ansys.Core.Units.Quantity | None#
Gets or sets the TargetCharacteristicLength.
- property Mesh.UseFixedSizeFunctionForSheets: bool | None#
Gets or sets the UseFixedSizeFunctionForSheets.
Method detail#
- Mesh.AddAutomaticMethod() Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod #
Creates a new AutomaticMethod
- Mesh.AddComment() Ansys.ACT.Automation.Mechanical.Comment #
Creates a new child Comment.
- Mesh.AddConnect() Ansys.ACT.Automation.Mechanical.MeshControls.Connect #
Creates a new Connect Control
- Mesh.AddContactMatchGroup() Ansys.ACT.Automation.Mechanical.ContactMatchGroup #
Add a new AddContactMatchGroup.
- Mesh.AddContactSizing() Ansys.ACT.Automation.Mechanical.MeshControls.ContactSizing #
Creates a new ContactSizing
- Mesh.AddDeviation() Ansys.ACT.Automation.Mechanical.MeshControls.Deviation #
Creates a new SagControl
- Mesh.AddDirectMorph() Ansys.ACT.Automation.Mechanical.DirectMorph #
Add a new DirectMorph.
- Mesh.AddFaceMeshing() Ansys.ACT.Automation.Mechanical.MeshControls.FaceMeshing #
Creates a new FaceMeshing
- Mesh.AddFeatureSuppress() Ansys.ACT.Automation.Mechanical.MeshControls.FeatureSuppress #
Creates a new FeatureSuppress
- Mesh.AddFigure() Ansys.ACT.Automation.Mechanical.Figure #
Creates a new child Figure.
- Mesh.AddGeometryFidelity() Ansys.ACT.Automation.Mechanical.MeshControls.GeometryFidelity #
Creates a new GeometryFidelity
- Mesh.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image #
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
- Mesh.AddInflation() Ansys.ACT.Automation.Mechanical.MeshControls.Inflation #
Creates a new Inflation
- Mesh.AddMatchControl() Ansys.ACT.Automation.Mechanical.MeshControls.MatchControl #
Creates a new MatchControl
- Mesh.AddMeshConnectionGroup() Ansys.ACT.Automation.Mechanical.MeshConnectionGroup #
Add a new MeshConnectionGroup.
- Mesh.AddMeshCopy() Ansys.ACT.Automation.Mechanical.MeshControls.MeshCopy #
Creates a new MeshCopy
- Mesh.AddNodeMergeGroup() Ansys.ACT.Automation.Mechanical.NodeMergeGroup #
Add a new NodeMergeGroup.
- Mesh.AddPinch() Ansys.ACT.Automation.Mechanical.MeshControls.Pinch #
Creates a new Pinch
- Mesh.AddPullExtrude() Ansys.ACT.Automation.Mechanical.MeshExtrude #
Add a new Pull (Extrude).
- Mesh.AddPullRevolve() Ansys.ACT.Automation.Mechanical.MeshExtrude #
Add a new Pull (Revolve).
- Mesh.AddPullSurfaceCoating() Ansys.ACT.Automation.Mechanical.MeshExtrude #
Add a new Pull (Surface Coating)).
- Mesh.AddRefinement() Ansys.ACT.Automation.Mechanical.MeshControls.Refinement #
Creates a new Refinement
- Mesh.AddRepairTopology() Ansys.ACT.Automation.Mechanical.MeshControls.RepairTopology #
Creates a new RepairTopology
- Mesh.AddSizing() Ansys.ACT.Automation.Mechanical.MeshControls.Sizing #
Creates a new Sizing
- Mesh.AddTopologySuppressControl() Ansys.ACT.Automation.Mechanical.MeshControls.TopologySuppressControl #
Creates a new TopologySuppressControl
- Mesh.AddWasher() Ansys.ACT.Automation.Mechanical.MeshControls.Washer #
Creates a new SagControl
- Mesh.AddWeld() Ansys.ACT.Automation.Mechanical.MeshControls.Weld #
Creates a new WeldControl
- Mesh.CleanPartOrBody(dataModelObjects: Iterable) None #
Clear generated data for parts and/or bodies provided.
- Mesh.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None #
Copies all visible properties from this object to another.
- Mesh.CreateMQSolidSurfaceElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) None #
Create Mesh Quality SolidSurface Element Name Selection
- Mesh.CreateMQSurfaceElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) None #
Create Mesh Quality Surface Element Named Selection
- Mesh.CreateMQVolumeElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) None #
Create Mesh Quality Volume Element Name Selection
- Mesh.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Creates a new parameter for a Property.
- Mesh.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject #
Creates a copy of the current DataModelObject.
Export the weld definition file to the specified location.
If the folder does not exist or file cannot be written to the location, an exception will be thrown.
Pre-existing files will be overwritten.
- Mesh.GetActiveSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) bool #
Get Active User Mesh Quality
- Mesh.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType] #
Gets the list of children, filtered by type.
- Mesh.GetIsShellTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get Shell Target Metric
- Mesh.GetIsSolidSurfaceTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get SolidSurface Target Metric
- Mesh.GetIsSolidTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get Solid Target Metric
- Mesh.GetMeshMetricOptions(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Mechanical.DataModel.Enums.MetricPreference #
GetMeshMetricOptions method.
- Mesh.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Gets the parameter corresponding to the given property.
- Mesh.GetSolidSurfaceMeshMetrics() Ansys.Mechanical.DataModel.Enums.MeshMetricType #
GetSolidSurfaceMeshMetrics method.
- Mesh.GetSolidSurfaceMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Average Metric Value
- Mesh.GetSolidSurfaceMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get Mesh Quality Count Failed
- Mesh.GetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Error Limit
- Mesh.GetSolidSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) str #
Get Mesh Quality Name
- Mesh.GetSolidSurfaceMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) float #
Get Mesh Quality Percentage Failed
- Mesh.GetSolidSurfaceMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get Mesh Quality Warning Count Failed
- Mesh.GetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Warning Limit
- Mesh.GetSolidSurfaceMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) float #
Get Mesh Quality Warning Percentage Failed
- Mesh.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) str #
Get Mesh Quality Worst Metric BackgroundColor
- Mesh.GetSolidSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Worst Metric Value
- Mesh.GetSurfaceMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Average Metric Value
- Mesh.GetSurfaceMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get Mesh Quality Count Failed
- Mesh.GetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get User Mesh Quality Error Limit
- Mesh.GetSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) str #
Get Mesh Quality Name
- Mesh.GetSurfaceMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) float #
Get Mesh Quality Percentage Failed
- Mesh.GetSurfaceMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get Mesh Quality Warning Count Failed
- Mesh.GetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get User Mesh Quality Warning Limit
- Mesh.GetSurfaceMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) float #
Get Mesh Quality Warning Percentage Failed
- Mesh.GetSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Worst Metric Value
- Mesh.GetVolumeMeshMetrics() Ansys.Mechanical.DataModel.Enums.MeshMetricType #
GetVolumeMeshMetrics method.
- Mesh.GetVolumeMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Average Metric Value
- Mesh.GetVolumeMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get Mesh Quality Count Failed
- Mesh.GetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Error Limit
- Mesh.GetVolumeMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) str #
Get Mesh Quality Name
- Mesh.GetVolumeMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) float #
Get Mesh Quality Percentage Failed
- Mesh.GetVolumeMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) int #
Get Mesh Quality Warning Count Failed
- Mesh.GetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Warning Limit
- Mesh.GetVolumeMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) float #
Get Mesh Quality Warning Percentage Failed
- Mesh.GetVolumeMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) str #
Get Mesh Quality Worst Metric BackgroundColor
- Mesh.GetVolumeMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) Ansys.Core.Units.Quantity #
Get Mesh Quality Worst Metric Value
- Mesh.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder #
Run the GroupSimilarObjects action.
- Mesh.PinchControlGeomtry(geomType: Ansys.Mechanical.DataModel.Enums.MeshControlPinchGeomtryType) None #
Set the geometry type for the Pinch Control.
- Mesh.PreviewMeshOnWeld(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) None #
Preview model mesh on one weld control provided.
- Mesh.PreviewMeshOnWeldWorksheet(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject, indices: Iterable[int]) None #
PreviewMeshOnWeldWorksheet method.
- Mesh.PreviewMeshOnWelds(dataModelObjects: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) None #
PreviewMeshOnWelds method.
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
- Mesh.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property #
Get a property by its unique name.
- Mesh.RemoveMeshLayers() None #
Removes Mesh Layers when contour enabled in Mesh Quality Workhseet mode.
- Mesh.RemoveParameter(propName: str) None #
Removes the parameter from the parameter set corresponding to the given property.
- Mesh.SetActiveSolidSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) None #
Set Active Mesh Quality
- Mesh.SetActiveSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) None #
Set Active Mesh Quality
- Mesh.SetActiveVolumeMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) None #
Set Active Mesh Quality
- Mesh.SetMeshMetricOptions(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, prefValue: Ansys.Mechanical.DataModel.Enums.MetricPreference) None #
SetMeshMetricOptions method.
- Mesh.SetSolidMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) None #
SetSolidMeshMetricLimits method.
- Mesh.SetSolidSurfaceMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) None #
SetSolidSurfaceMeshMetricLimits method.
- Mesh.SetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) None #
Set Mesh Quality Error Limit
- Mesh.SetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) None #
Set Mesh Quality Warning Limit
- Mesh.SetSurfaceMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) None #
SetSurfaceMeshMetricLimits method.
- Mesh.SetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) None #
Set Mesh Quality Error Level
- Mesh.SetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) None #
Set Mesh Quality Warning Limit
- Mesh.SetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) None #
Set Mesh Quality Error Limit
- Mesh.SetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) None #
Set Mesh Quality Warning Limit