BearingProbe

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.Results.ProbeResults.BearingProbe

Bases: object

Defines a BoltPretensionProbe.

Overview

Methods

ExportAnimation	Run the ExportAnimation action.
ClearGeneratedData	Run the ClearGeneratedData action.
DuplicateWithoutResults	Run the DuplicateWithoutResults action.
EvaluateAllResults	Run the EvaluateAllResults action.
SnapToMeshNodes	Snap the coordinates of probe result to the mesh nodes.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.
Delete	Run the Delete action.
GetChildren	Gets the list of children, filtered by type.
GetChildren	Gets the list of children, filtered by type.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
Activate	Activate the current object.
CopyTo	Copies all visible properties from this object to another.
Duplicate	Creates a copy of the current DataModelObject.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByName	Get a property by its unique name.
PropertyByAPIName	Get a property by its API name.
CreateParameter	Creates a new parameter for a Property.
GetParameter	Gets the parameter corresponding to the given property.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.

Properties

InternalObject	Gets the internal object. For advanced usage only.
ScaleFactorValue	Gets or sets the ScaleFactorValue.
ReportedFrequency	Gets the ReportedFrequency.
DampingForce1	Gets the DampingForce1.
DampingForce2	Gets the DampingForce2.
Elongation1	Gets the Elongation1.
Elongation2	Gets the Elongation2.
ElasticForce1	Gets the ElasticForce1.
ElasticForce2	Gets the ElasticForce2.
Velocity1	Gets the Velocity1.
Velocity2	Gets the Velocity2.
MaximumDampingForce1	Gets the MaximumDampingForce1.
MaximumDampingForce2	Gets the MaximumDampingForce2.
MaximumElongation1	Gets the MaximumElongation1.
MaximumElongation2	Gets the MaximumElongation2.
MaximumElasticForce1	Gets the MaximumElasticForce1.
MaximumElasticForce2	Gets the MaximumElasticForce2.
MaximumVelocity1	Gets the MaximumVelocity1.
MaximumVelocity2	Gets the MaximumVelocity2.
MinimumDampingForce1	Gets the MinimumDampingForce1.
MinimumDampingForce2	Gets the MinimumDampingForce2.
MinimumElongation1	Gets the MinimumElongation1.
MinimumElongation2	Gets the MinimumElongation2.
MinimumElasticForce1	Gets the MinimumElasticForce1.
MinimumElasticForce2	Gets the MinimumElasticForce2.
MinimumVelocity1	Gets the MinimumVelocity1.
MinimumVelocity2	Gets the MinimumVelocity2.
SweepingPhase	Gets or sets the SweepingPhase.
PhaseIncrement	Gets or sets the PhaseIncrement.
ScaleFactor	Gets or sets the ScaleFactor.
By	Gets or sets the By.
DataModelObjectCategory	Gets the current DataModelObject’s category.
Summation	Gets or sets the Summation.
LocationMethod	Gets or sets the LocationMethod.
GeometryLocation	Gets or sets the GeometryLocation.
CoordinateSystemSelection	Gets or sets the CoordinateSystemSelection.
BoundaryConditionSelection	Gets or sets the BoundaryConditionSelection. In order to select the option ‘WeakSprings’, please use the property ‘LocationMethod = LocationDefinitionMethod.WeakSprings’.
ContactRegionSelection	Gets or sets the ContactRegionSelection.
RemotePointSelection	Gets or sets the RemotePointSelection.
BeamSelection	Gets or sets the BeamSelection.
MeshConnectionSelection	Gets or sets the MeshConnectionSelection.
SurfaceSelection	Gets or sets the MeshConnectionSelection.
SpringSelection	Gets or sets the SpringSelection.
IsSolved	Gets the IsSolved.
Orientation	Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.
IterationNumber	Gets the IterationNumber.
LoadStep	Gets the LoadStep.
LoadStepNumber	Gets or sets the LoadStepNumber.
Substep	Gets the Substep.
DisplayTime	Gets or sets the DisplayTime.
MaximumTotal	Gets the MaximumTotal.
MaximumXAxis	Gets the MaximumXAxis.
MaximumYAxis	Gets the MaximumYAxis.
MaximumZAxis	Gets the MaximumZAxis.
MinimumTotal	Gets the MinimumTotal.
MinimumXAxis	Gets the MinimumXAxis.
MinimumYAxis	Gets the MinimumYAxis.
MinimumZAxis	Gets the MinimumZAxis.
Time	Gets the Time.
Total	Gets the Total.
XAxis	Gets the XAxis.
YAxis	Gets the YAxis.
ZAxis	Gets the ZAxis.
ResultSelection	Gets or sets the ResultSelection.
SpatialResolution	Gets or sets the SpatialResolution.
Type	Gets the Type.
DpfEvaluation	Gets or sets the DpfEvaluation.
Suppressed	Gets or sets the Suppressed.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
Figures	Gets the list of associated figures.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Properties	Gets the list of properties for this object.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property BearingProbe.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSProbeResultAuto | None

Gets the internal object. For advanced usage only.

property BearingProbe.ScaleFactorValue: System.Double | None

Gets or sets the ScaleFactorValue.

property BearingProbe.ReportedFrequency: Ansys.Core.Units.Quantity | None

Gets the ReportedFrequency.

property BearingProbe.DampingForce1: Ansys.Core.Units.Quantity | None

Gets the DampingForce1.

property BearingProbe.DampingForce2: Ansys.Core.Units.Quantity | None

Gets the DampingForce2.

property BearingProbe.Elongation1: Ansys.Core.Units.Quantity | None

Gets the Elongation1.

property BearingProbe.Elongation2: Ansys.Core.Units.Quantity | None

Gets the Elongation2.

property BearingProbe.ElasticForce1: Ansys.Core.Units.Quantity | None

Gets the ElasticForce1.

property BearingProbe.ElasticForce2: Ansys.Core.Units.Quantity | None

Gets the ElasticForce2.

property BearingProbe.Velocity1: Ansys.Core.Units.Quantity | None

Gets the Velocity1.

property BearingProbe.Velocity2: Ansys.Core.Units.Quantity | None

Gets the Velocity2.

property BearingProbe.MaximumDampingForce1: Ansys.Core.Units.Quantity | None

Gets the MaximumDampingForce1.

property BearingProbe.MaximumDampingForce2: Ansys.Core.Units.Quantity | None

Gets the MaximumDampingForce2.

property BearingProbe.MaximumElongation1: Ansys.Core.Units.Quantity | None

Gets the MaximumElongation1.

property BearingProbe.MaximumElongation2: Ansys.Core.Units.Quantity | None

Gets the MaximumElongation2.

property BearingProbe.MaximumElasticForce1: Ansys.Core.Units.Quantity | None

Gets the MaximumElasticForce1.

property BearingProbe.MaximumElasticForce2: Ansys.Core.Units.Quantity | None

Gets the MaximumElasticForce2.

property BearingProbe.MaximumVelocity1: Ansys.Core.Units.Quantity | None

Gets the MaximumVelocity1.

property BearingProbe.MaximumVelocity2: Ansys.Core.Units.Quantity | None

Gets the MaximumVelocity2.

property BearingProbe.MinimumDampingForce1: Ansys.Core.Units.Quantity | None

Gets the MinimumDampingForce1.

property BearingProbe.MinimumDampingForce2: Ansys.Core.Units.Quantity | None

Gets the MinimumDampingForce2.

property BearingProbe.MinimumElongation1: Ansys.Core.Units.Quantity | None

Gets the MinimumElongation1.

property BearingProbe.MinimumElongation2: Ansys.Core.Units.Quantity | None

Gets the MinimumElongation2.

property BearingProbe.MinimumElasticForce1: Ansys.Core.Units.Quantity | None

Gets the MinimumElasticForce1.

property BearingProbe.MinimumElasticForce2: Ansys.Core.Units.Quantity | None

Gets the MinimumElasticForce2.

property BearingProbe.MinimumVelocity1: Ansys.Core.Units.Quantity | None

Gets the MinimumVelocity1.

property BearingProbe.MinimumVelocity2: Ansys.Core.Units.Quantity | None

Gets the MinimumVelocity2.

property BearingProbe.SweepingPhase: Ansys.Core.Units.Quantity | None

Gets or sets the SweepingPhase.

property BearingProbe.PhaseIncrement: Ansys.Core.Units.Quantity | None

Gets or sets the PhaseIncrement.

property BearingProbe.ScaleFactor: Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None

Gets or sets the ScaleFactor.

property BearingProbe.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None

Gets or sets the By.

property BearingProbe.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property BearingProbe.Summation: Ansys.Mechanical.DataModel.Enums.MomentsAtSummationPointType | None

Gets or sets the Summation.

property BearingProbe.LocationMethod: Ansys.Mechanical.DataModel.Enums.LocationDefinitionMethod | None

Gets or sets the LocationMethod.

property BearingProbe.GeometryLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the GeometryLocation.

property BearingProbe.CoordinateSystemSelection: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the CoordinateSystemSelection.

property BearingProbe.BoundaryConditionSelection: Ansys.ACT.Automation.Mechanical.DataModelObject | None

Gets or sets the BoundaryConditionSelection. In order to select the option ‘WeakSprings’, please use the property ‘LocationMethod = LocationDefinitionMethod.WeakSprings’.

property BearingProbe.ContactRegionSelection: Ansys.ACT.Automation.Mechanical.Connections.ContactRegion | None

Gets or sets the ContactRegionSelection.

property BearingProbe.RemotePointSelection: Ansys.ACT.Automation.Mechanical.RemotePoint | None

Gets or sets the RemotePointSelection.

property BearingProbe.BeamSelection: Ansys.ACT.Automation.Mechanical.Connections.Beam | None

Gets or sets the BeamSelection.

property BearingProbe.MeshConnectionSelection: Ansys.ACT.Automation.Mechanical.MeshConnection | None

Gets or sets the MeshConnectionSelection.

property BearingProbe.SurfaceSelection: Ansys.ACT.Automation.Mechanical.Surface | None

Gets or sets the MeshConnectionSelection.

property BearingProbe.SpringSelection: Ansys.ACT.Automation.Mechanical.Connections.Spring | None

Gets or sets the SpringSelection.

property BearingProbe.IsSolved: System.Boolean | None

Gets the IsSolved.

property BearingProbe.Orientation: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.

property BearingProbe.IterationNumber: System.Int32 | None

Gets the IterationNumber.

property BearingProbe.LoadStep: System.Int32 | None

Gets the LoadStep.

property BearingProbe.LoadStepNumber: System.UInt32 | None

Gets or sets the LoadStepNumber.

property BearingProbe.Substep: System.Int32 | None

Gets the Substep.

property BearingProbe.DisplayTime: Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property BearingProbe.MaximumTotal: Ansys.Core.Units.Quantity | None

Gets the MaximumTotal.

property BearingProbe.MaximumXAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumXAxis.

property BearingProbe.MaximumYAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumYAxis.

property BearingProbe.MaximumZAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumZAxis.

property BearingProbe.MinimumTotal: Ansys.Core.Units.Quantity | None

Gets the MinimumTotal.

property BearingProbe.MinimumXAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumXAxis.

property BearingProbe.MinimumYAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumYAxis.

property BearingProbe.MinimumZAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumZAxis.

property BearingProbe.Time: Ansys.Core.Units.Quantity | None

Gets the Time.

property BearingProbe.Total: Ansys.Core.Units.Quantity | None

Gets the Total.

property BearingProbe.XAxis: Ansys.Core.Units.Quantity | None

Gets the XAxis.

property BearingProbe.YAxis: Ansys.Core.Units.Quantity | None

Gets the YAxis.

property BearingProbe.ZAxis: Ansys.Core.Units.Quantity | None

Gets the ZAxis.

property BearingProbe.ResultSelection: Ansys.Mechanical.DataModel.Enums.ProbeDisplayFilter | None

Gets or sets the ResultSelection.

property BearingProbe.SpatialResolution: Ansys.Mechanical.DataModel.Enums.MinimumOrMaximum | None

Gets or sets the SpatialResolution.

property BearingProbe.Type: Ansys.Mechanical.DataModel.Enums.ProbeResultType | None

Gets the Type.

property BearingProbe.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property BearingProbe.Suppressed: System.Boolean | None

Gets or sets the Suppressed.

property BearingProbe.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property BearingProbe.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property BearingProbe.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property BearingProbe.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property BearingProbe.InternalObject: System.Object | None

Gets the internal object. For advanced usage only.

property BearingProbe.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property BearingProbe.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

BearingProbe.ExportAnimation(filePath: System.String, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → System.Void

Run the ExportAnimation action.

BearingProbe.ClearGeneratedData() → System.Void

Run the ClearGeneratedData action.

BearingProbe.DuplicateWithoutResults() → Ansys.ACT.Automation.Mechanical.DataModelObject

Run the DuplicateWithoutResults action.

BearingProbe.EvaluateAllResults() → System.Void

Run the EvaluateAllResults action.

BearingProbe.SnapToMeshNodes() → System.Void

Snap the coordinates of probe result to the mesh nodes.

BearingProbe.RenameBasedOnDefinition() → System.Void

Run the RenameBasedOnDefinition action.

BearingProbe.Delete() → System.Void

Run the Delete action.

BearingProbe.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]

Gets the list of children, filtered by type.

BearingProbe.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]

Gets the list of children, filtered by type.

BearingProbe.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

BearingProbe.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

BearingProbe.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

BearingProbe.Activate() → System.Void

Activate the current object.

BearingProbe.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void

Copies all visible properties from this object to another.

BearingProbe.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

BearingProbe.GroupAllSimilarChildren() → System.Void

Run the GroupAllSimilarChildren action.

BearingProbe.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

BearingProbe.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

BearingProbe.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

BearingProbe.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

BearingProbe.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

BearingProbe.RemoveParameter(propName: System.String) → System.Void

Removes the parameter from the parameter set corresponding to the given property.