`StrainResult`#

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Results.StrainResults.StrainResult#

Bases: object

Defines a StrainResult.

Overview#

Methods

`ClearGeneratedData`	Run the ClearGeneratedData action.
`EvaluateAllResults`	Run the EvaluateAllResults action.
`FetchRemoteResults`	Run the FetchRemoteResult action.
`ExportToTextFile`	Run the ExportToTextFile action.
`ExportAnimation`	Run the ExportAnimation action.
`DuplicateWithoutResults`	Run the DuplicateWithoutResults action.
`CreateResultsAtAllSets`	Creates results at all sets for results under a solution.
`PromoteToNamedSelection`	Run the PromoteToNamedSelection action.
`CreateParameter`	CreateParameter method.
`AddAlert`	Creates a new Alert
`AddConvergence`	Creates a new Convergence
`RenameBasedOnDefinition`	Run the RenameBasedOnDefinition action.
`Delete`	Run the Delete action.
`GetChildren`	Gets the list of children, filtered by type.
`GetChildren`	Gets the list of children, filtered by type.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`Activate`	Activate the current object.
`CopyTo`	Copies all visible properties from this object to another.
`Duplicate`	Creates a copy of the current DataModelObject.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PropertyByName`	Get a property by its unique name.
`PropertyByAPIName`	Get a property by its API name.
`GetParameter`	Gets the parameter corresponding to the given property.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.

Properties

`Mode`	Gets or sets the Mode.
`Ply`	Gets or sets the Ply selection.
`Plies`	Plies property.
`EnvironmentSelection`	Gets or sets the EnvironmentSelection.
`InternalObject`	Gets the internal object. For advanced usage only.
`HarmonicIndex`	Gets or sets the HarmonicIndex.
`CyclicMode`	Gets or sets the CyclicMode.
`IterationStep`	Gets or sets the IterationStep.
`LoadMultiplier`	Gets the LoadMultiplier.
`ReportedFrequency`	Gets the ReportedFrequency.
`SweepingPhase`	Gets or sets the SweepingPhase.
`PhaseIncrement`	Gets or sets the PhaseIncrement.
`Frequency`	Gets or sets the Frequency.
`Position`	Gets or sets the Position.
`StressStrainType`	Gets or sets the StressStrainType.
`SubScopeBy`	Gets or sets the SubScopeBy.
`Amplitude`	Gets or sets the Amplitude.
`AverageAcrossBodies`	Gets or sets the AverageAcrossBodies.
`DataModelObjectCategory`	Gets the current DataModelObject’s category.
`PlotData`	Gets the result table.
`Location`	Gets or sets the Location.
`TimeForMinimumOfMinimumValues`	Get the Time for the minimum of minimum values.
`TimeForMinimumOfMaximumValues`	Get the Time for the minimum of maximum values.
`LoadStepForMinimumOfMinimumValues`	Get the Load Step for the minimum of minimum values.
`LoadStepForMinimumOfMaximumValues`	Get the Load Step for the minimum of maximum values.
`TimeForMaximumOfMinimumValues`	Get the Time for the maximum of minimum values.
`TimeForMaximumOfMaximumValues`	Get the Time for the maximum of maximum values.
`LoadStepForMaximumOfMinimumValues`	Get the Load Step for the maximum of minimum values.
`LoadStepForMaximumOfMaximumValues`	Get the Load Step for the maximum of maximum values.
`IsSolved`	Gets the IsSolved.
`CoordinateSystem`	Gets or sets the Coordinate System.
`ScopingMethod`	Gets or sets the ScopingMethod.
`SetNumber`	Gets or sets the Set Number.
`CombinationNumber`	Gets or sets the Combination Number for a Solution Combination result.
`SolutionCombinationDriver`	Gets or sets the SolutionCombinationDriver.
`Path`	Path property.
`Surface`	Surface property.
`NamedSelections`	Gets or sets the NamedSelections.
`WaterfallPanelShowTextOnMosaic`	Gets or sets the Waterfall Panel Mosaic Text Property.
`CrackFrontNumber`	Gets or sets the CrackFrontNumber.
`GlobalIDs`	Gets or sets the GlobalIDs.
`Identifier`	Gets or sets the Identifier.
`IterationNumber`	Gets the IterationNumber.
`LoadStep`	Gets the LoadStep.
`MaximumOccursOn`	Gets the MaximumOccursOn.
`MinimumOccursOn`	Gets the MinimumOccursOn.
`LoadStepNumber`	Gets or sets the LoadStepNumber.
`SolverComponentIDs`	Gets or sets the SolverComponentIDs.
`Substep`	Gets the Substep.
`Average`	Gets the Average.
`Maximum`	Gets the Maximum.
`MaximumOfMaximumOverTime`	Gets the MaximumOfMaximumOverTime.
`MaximumOfMinimumOverTime`	Gets the MaximumOfMinimumOverTime.
`Minimum`	Gets the Minimum.
`MinimumOfMaximumOverTime`	Gets the MinimumOfMaximumOverTime.
`MinimumOfMinimumOverTime`	Gets the MinimumOfMinimumOverTime.
`Time`	Gets the Time.
`DisplayTime`	Gets or sets the DisplayTime.
`GraphControlsXAxis`	Gets or sets the GraphControlsXAxis.
`DisplayOption`	Gets or sets the DisplayOption.
`DpfEvaluation`	Gets or sets the DpfEvaluation.
`By`	Gets or sets the By.
`ItemType`	Gets or sets the ItemType.
`CalculateTimeHistory`	Gets or sets the CalculateTimeHistory.
`Suppressed`	Gets or sets the Suppressed.
`Children`	Gets the list of children.
`Comments`	Gets the list of associated comments.
`Figures`	Gets the list of associated figures.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`Properties`	Gets the list of properties for this object.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Property detail#

property StrainResult.Mode: System.UInt32 | None: Gets or sets the Mode.

property StrainResult.Ply: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None: Gets or sets the Ply selection.

property StrainResult.Plies: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None: Plies property.

property StrainResult.EnvironmentSelection: Ansys.ACT.Automation.Mechanical.Analysis | None: Gets or sets the EnvironmentSelection.

property StrainResult.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None: Gets the internal object. For advanced usage only.

property StrainResult.HarmonicIndex: System.UInt32 | None: Gets or sets the HarmonicIndex.

property StrainResult.CyclicMode: System.UInt32 | None: Gets or sets the CyclicMode.

property StrainResult.IterationStep: System.Int32 | None: Gets or sets the IterationStep.

property StrainResult.LoadMultiplier: System.Double | None: Gets the LoadMultiplier.

property StrainResult.ReportedFrequency: Ansys.Core.Units.Quantity | None: Gets the ReportedFrequency.

property StrainResult.SweepingPhase: Ansys.Core.Units.Quantity | None: Gets or sets the SweepingPhase.

property StrainResult.PhaseIncrement: Ansys.Core.Units.Quantity | None: Gets or sets the PhaseIncrement.

property StrainResult.Frequency: Ansys.Core.Units.Quantity | None: Gets or sets the Frequency.

property StrainResult.Position: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None: Gets or sets the Position.

property StrainResult.StressStrainType: Ansys.Mechanical.DataModel.Enums.StressStrainType | None: Gets or sets the StressStrainType.

property StrainResult.SubScopeBy: Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None: Gets or sets the SubScopeBy.

property StrainResult.Amplitude: System.Boolean | None: Gets or sets the Amplitude.

property StrainResult.AverageAcrossBodies: System.Boolean | None: Gets or sets the AverageAcrossBodies.

property StrainResult.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None: Gets the current DataModelObject’s category.

property StrainResult.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None: Gets the result table.

property StrainResult.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None: Gets or sets the Location.

property StrainResult.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None: Get the Time for the minimum of minimum values.

property StrainResult.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None: Get the Time for the minimum of maximum values.

property StrainResult.LoadStepForMinimumOfMinimumValues: System.UInt32 | None: Get the Load Step for the minimum of minimum values.

property StrainResult.LoadStepForMinimumOfMaximumValues: System.UInt32 | None: Get the Load Step for the minimum of maximum values.

property StrainResult.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None: Get the Time for the maximum of minimum values.

property StrainResult.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None: Get the Time for the maximum of maximum values.

property StrainResult.LoadStepForMaximumOfMinimumValues: System.UInt32 | None: Get the Load Step for the maximum of minimum values.

property StrainResult.LoadStepForMaximumOfMaximumValues: System.UInt32 | None: Get the Load Step for the maximum of maximum values.

property StrainResult.IsSolved: System.Boolean | None: Gets the IsSolved.

property StrainResult.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None: Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property StrainResult.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None: Gets or sets the ScopingMethod.

property StrainResult.SetNumber: System.UInt32 | None: Gets or sets the Set Number.

property StrainResult.CombinationNumber: System.UInt32 | None: Gets or sets the Combination Number for a Solution Combination result.

property StrainResult.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None: Gets or sets the SolutionCombinationDriver.

property StrainResult.Path: Ansys.ACT.Automation.Mechanical.Path | None: Path property.

property StrainResult.Surface: Ansys.ACT.Automation.Mechanical.Surface | None: Surface property.

property StrainResult.NamedSelections: System.Collections.Generic.IEnumerable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets or sets the NamedSelections.

property StrainResult.WaterfallPanelShowTextOnMosaic: System.Boolean | None: Gets or sets the Waterfall Panel Mosaic Text Property.

property StrainResult.CrackFrontNumber: System.Int32 | None: Gets or sets the CrackFrontNumber.

property StrainResult.GlobalIDs: System.String | None: Gets or sets the GlobalIDs.

property StrainResult.Identifier: System.String | None: Gets or sets the Identifier.

property StrainResult.IterationNumber: System.Int32 | None: Gets the IterationNumber.

property StrainResult.LoadStep: System.Int32 | None: Gets the LoadStep.

property StrainResult.MaximumOccursOn: System.String | None: Gets the MaximumOccursOn.

property StrainResult.MinimumOccursOn: System.String | None: Gets the MinimumOccursOn.

property StrainResult.LoadStepNumber: System.UInt32 | None: Gets or sets the LoadStepNumber.

property StrainResult.SolverComponentIDs: System.String | None: Gets or sets the SolverComponentIDs.

property StrainResult.Substep: System.Int32 | None: Gets the Substep.

property StrainResult.Average: Ansys.Core.Units.Quantity | None: Gets the Average.

property StrainResult.Maximum: Ansys.Core.Units.Quantity | None: Gets the Maximum.

property StrainResult.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None: Gets the MaximumOfMaximumOverTime.

property StrainResult.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None: Gets the MaximumOfMinimumOverTime.

property StrainResult.Minimum: Ansys.Core.Units.Quantity | None: Gets the Minimum.

property StrainResult.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None: Gets the MinimumOfMaximumOverTime.

property StrainResult.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None: Gets the MinimumOfMinimumOverTime.

property StrainResult.Time: Ansys.Core.Units.Quantity | None: Gets the Time.

property StrainResult.DisplayTime: Ansys.Core.Units.Quantity | None: Gets or sets the DisplayTime.

property StrainResult.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None: Gets or sets the GraphControlsXAxis.

property StrainResult.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None: Gets or sets the DisplayOption.

property StrainResult.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None: Gets or sets the DpfEvaluation.

property StrainResult.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None: Gets or sets the By.

property StrainResult.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None: Gets or sets the ItemType.

property StrainResult.CalculateTimeHistory: System.Boolean | None: Gets or sets the CalculateTimeHistory.

property StrainResult.Suppressed: System.Boolean | None: Gets or sets the Suppressed.

property StrainResult.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets the list of children.

property StrainResult.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None: Gets the list of associated comments.

property StrainResult.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None: Gets the list of associated figures.

property StrainResult.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None: Gets the list of associated images.

property StrainResult.InternalObject: System.Object | None: Gets the internal object. For advanced usage only.

property StrainResult.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties for this object.

property StrainResult.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties that are visible for this object.

Method detail#

StrainResult.ClearGeneratedData() → System.Void: Run the ClearGeneratedData action.

StrainResult.EvaluateAllResults() → System.Void: Run the EvaluateAllResults action.

StrainResult.FetchRemoteResults() → System.Void: Run the FetchRemoteResult action.

StrainResult.ExportToTextFile(filePath: System.String) → System.Void: Run the ExportToTextFile action.

StrainResult.ExportAnimation(filePath: System.String, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → System.Void: Run the ExportAnimation action.

StrainResult.DuplicateWithoutResults() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Run the DuplicateWithoutResults action.

StrainResult.CreateResultsAtAllSets() → System.Collections.Generic.List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Creates results at all sets for results under a solution.

StrainResult.PromoteToNamedSelection() → System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.NamedSelection]: Run the PromoteToNamedSelection action.

StrainResult.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: CreateParameter method.

StrainResult.AddAlert() → Ansys.ACT.Automation.Mechanical.Results.Alert: Creates a new Alert

StrainResult.AddConvergence() → Ansys.ACT.Automation.Mechanical.Results.Convergence: Creates a new Convergence

StrainResult.RenameBasedOnDefinition() → System.Void: Run the RenameBasedOnDefinition action.

StrainResult.Delete() → System.Void: Run the Delete action.

StrainResult.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]: Gets the list of children, filtered by type.

StrainResult.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Gets the list of children, filtered by type.

StrainResult.AddComment() → Ansys.ACT.Automation.Mechanical.Comment: Creates a new child Comment.

StrainResult.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure: Creates a new child Figure.

StrainResult.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

StrainResult.Activate() → System.Void: Activate the current object.

StrainResult.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void: Copies all visible properties from this object to another.

StrainResult.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Creates a copy of the current DataModelObject.

StrainResult.GroupAllSimilarChildren() → System.Void: Run the GroupAllSimilarChildren action.

StrainResult.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder: Run the GroupSimilarObjects action.

StrainResult.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property: Get a property by its unique name.

StrainResult.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

StrainResult.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Gets the parameter corresponding to the given property.

StrainResult.RemoveParameter(propName: System.String) → System.Void: Removes the parameter from the parameter set corresponding to the given property.