PointMass
#
- class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.PointMass#
Bases:
object
Defines a PointMass.
Overview#
Activate the current object. |
|
Creates a new CommandSnippet |
|
Creates a new child Comment. |
|
Creates a new child Figure. |
|
Creates a new child Image. |
|
Copies all visible properties from this object to another. |
|
Creates a new parameter for a Property. |
|
Run the Delete action. |
|
Creates a copy of the current DataModelObject. |
|
Gets the list of children, filtered by type. |
|
Gets the parameter corresponding to the given property. |
|
Run the GroupAllSimilarChildren action. |
|
Run the GroupSimilarObjects action. |
|
Run the PromoteToRemotePoint action. |
|
Get a property by its API name. |
|
Get a property by its unique name. |
|
Removes the parameter from the parameter set corresponding to the given property. |
Gets or sets the AppliedBy. |
|
Gets or sets the BeamRadius. |
|
Gets or sets the Behavior. |
|
Gets the list of children. |
|
Gets the list of associated comments. |
|
Gets or sets the CoordinateSystem. |
|
Gets the current DataModelObject's category. |
|
Gets or sets the ElementAPDLName. |
|
Gets the list of associated figures. |
|
Gets the list of associated images. |
|
Gets the internal object. For advanced usage only. |
|
Gets the IsDistributedMass. |
|
Gets or sets the Geometry. |
|
Gets or sets the Mass. |
|
Gets or sets the MassMomentOfInertiaX. |
|
Gets or sets the MassMomentOfInertiaY. |
|
Gets or sets the MassMomentOfInertiaZ. |
|
Gets or sets the Material. |
|
Gets the NodalCoordinateSystem. |
|
Gets or sets the PinballRegion. |
|
Gets the list of properties for this object. |
|
Gets or sets the ReadOnly. |
|
Gets the remote point associated to the point mass. |
|
Gets or sets the Suppressed. |
|
Gets the list of properties that are visible for this object. |
|
Gets or sets the XCoordinate. |
|
Gets or sets the YCoordinate. |
|
Gets or sets the ZCoordinate. |
Property detail#
- property PointMass.AppliedBy: Ansys.Mechanical.DataModel.Enums.RemoteApplicationType | None#
Gets or sets the AppliedBy.
- property PointMass.BeamRadius: Ansys.Core.Units.Quantity | None#
Gets or sets the BeamRadius.
- property PointMass.Behavior: Ansys.Mechanical.DataModel.Enums.LoadBehavior | None#
Gets or sets the Behavior.
- property PointMass.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#
Gets the list of children.
- property PointMass.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#
Gets the list of associated comments.
- property PointMass.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the CoordinateSystem.
- property PointMass.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#
Gets the current DataModelObject's category.
- property PointMass.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#
Gets the list of associated figures.
- property PointMass.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#
Gets the list of associated images.
- property PointMass.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSPointMassAuto | None#
Gets the internal object. For advanced usage only.
- property PointMass.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the Geometry.
- property PointMass.Mass: Ansys.Core.Units.Quantity | None#
Gets or sets the Mass.
- property PointMass.MassMomentOfInertiaX: Ansys.Core.Units.Quantity | None#
Gets or sets the MassMomentOfInertiaX.
- property PointMass.MassMomentOfInertiaY: Ansys.Core.Units.Quantity | None#
Gets or sets the MassMomentOfInertiaY.
- property PointMass.MassMomentOfInertiaZ: Ansys.Core.Units.Quantity | None#
Gets or sets the MassMomentOfInertiaZ.
- property PointMass.NodalCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets the NodalCoordinateSystem.
- property PointMass.PinballRegion: Ansys.Core.Units.Quantity | None#
Gets or sets the PinballRegion.
- property PointMass.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties for this object.
- property PointMass.RemotePoint: Ansys.ACT.Automation.Mechanical.RemotePoint | None#
Gets the remote point associated to the point mass.
- property PointMass.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties that are visible for this object.
- property PointMass.XCoordinate: Ansys.Core.Units.Quantity | None#
Gets or sets the XCoordinate.
- property PointMass.YCoordinate: Ansys.Core.Units.Quantity | None#
Gets or sets the YCoordinate.
- property PointMass.ZCoordinate: Ansys.Core.Units.Quantity | None#
Gets or sets the ZCoordinate.
Method detail#
- PointMass.AddCommandSnippet() Ansys.ACT.Automation.Mechanical.CommandSnippet #
Creates a new CommandSnippet
- PointMass.AddComment() Ansys.ACT.Automation.Mechanical.Comment #
Creates a new child Comment.
- PointMass.AddFigure() Ansys.ACT.Automation.Mechanical.Figure #
Creates a new child Figure.
- PointMass.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image #
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
- PointMass.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None #
Copies all visible properties from this object to another.
- PointMass.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Creates a new parameter for a Property.
- PointMass.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject #
Creates a copy of the current DataModelObject.
- PointMass.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType] #
Gets the list of children, filtered by type.
- PointMass.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Gets the parameter corresponding to the given property.
- PointMass.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder #
Run the GroupSimilarObjects action.
- PointMass.PromoteToRemotePoint() Iterable[Ansys.ACT.Automation.Mechanical.RemotePoint] #
Run the PromoteToRemotePoint action.
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.