EquivalentCreepStrainRST#

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Results.StrainResults.EquivalentCreepStrainRST#

Bases: object

Defines a EquivalentCreepStrainRST.

Overview#

Activate

Activate the current object.

AddAlert

Creates a new Alert

AddComment

Creates a new child Comment.

AddConvergence

Creates a new Convergence

AddFigure

Creates a new child Figure.

AddImage

Creates a new child Image.

ClearGeneratedData

Run the ClearGeneratedData action.

CopyTo

Copies all visible properties from this object to another.

CreateParameter

CreateParameter method.

CreateResultsAtAllSets

Creates results at all sets for results under a solution.

Delete

Run the Delete action.

Duplicate

Creates a copy of the current DataModelObject.

DuplicateWithoutResults

Run the DuplicateWithoutResults action.

EvaluateAllResults

Run the EvaluateAllResults action.

ExportAnimation

Run the ExportAnimation action.

ExportToTextFile

Run the ExportToTextFile action.

FetchRemoteResults

Run the FetchRemoteResult action.

GetChildren

Gets the list of children, filtered by type.

GetParameter

Gets the parameter corresponding to the given property.

GroupAllSimilarChildren

Run the GroupAllSimilarChildren action.

GroupSimilarObjects

Run the GroupSimilarObjects action.

PromoteToNamedSelection

Run the PromoteToNamedSelection action.

PropertyByAPIName

Get a property by its API name.

PropertyByName

Get a property by its unique name.

RemoveParameter

Removes the parameter from the parameter set corresponding to the given property.

RenameBasedOnDefinition

Run the RenameBasedOnDefinition action.

Amplitude

Gets or sets the Amplitude.

Average

Gets the Average.

AverageAcrossBodies

Gets or sets the AverageAcrossBodies.

By

Gets or sets the By.

CalculateTimeHistory

Gets or sets the CalculateTimeHistory.

Children

Gets the list of children.

CombinationNumber

Gets or sets the Combination Number for a Solution Combination result.

Comments

Gets the list of associated comments.

CoordinateSystem

Gets or sets the Coordinate System.

CrackFrontNumber

Gets or sets the CrackFrontNumber.

CyclicMode

Gets or sets the CyclicMode.

DataModelObjectCategory

Gets the current DataModelObject's category.

DisplayOption

Gets or sets the DisplayOption.

DisplayTime

Gets or sets the DisplayTime.

DpfEvaluation

Gets or sets the DpfEvaluation.

EnvironmentSelection

Gets or sets the EnvironmentSelection.

Figures

Gets the list of associated figures.

Frequency

Gets or sets the Frequency.

GlobalIDs

Gets or sets the GlobalIDs.

GraphControlsXAxis

Gets or sets the GraphControlsXAxis.

HarmonicIndex

Gets or sets the HarmonicIndex.

Identifier

Gets or sets the Identifier.

Images

Gets the list of associated images.

InternalObject

Gets the internal object. For advanced usage only.

IsSolved

Gets the IsSolved.

ItemType

Gets or sets the ItemType.

IterationNumber

Gets the IterationNumber.

IterationStep

Gets or sets the IterationStep.

LoadMultiplier

Gets the LoadMultiplier.

LoadStep

Gets the LoadStep.

LoadStepForMaximumOfMaximumValues

Get the Load Step for the maximum of maximum values.

LoadStepForMaximumOfMinimumValues

Get the Load Step for the maximum of minimum values.

LoadStepForMinimumOfMaximumValues

Get the Load Step for the minimum of maximum values.

LoadStepForMinimumOfMinimumValues

Get the Load Step for the minimum of minimum values.

LoadStepNumber

Gets or sets the LoadStepNumber.

Location

Gets or sets the Location.

Maximum

Gets the Maximum.

MaximumOccursOn

Gets the MaximumOccursOn.

MaximumOfMaximumOverTime

Gets the MaximumOfMaximumOverTime.

MaximumOfMinimumOverTime

Gets the MaximumOfMinimumOverTime.

Minimum

Gets the Minimum.

MinimumOccursOn

Gets the MinimumOccursOn.

MinimumOfMaximumOverTime

Gets the MinimumOfMaximumOverTime.

MinimumOfMinimumOverTime

Gets the MinimumOfMinimumOverTime.

Mode

Gets or sets the Mode.

NamedSelections

Gets or sets the NamedSelections.

Path

Path property.

PhaseIncrement

Gets or sets the PhaseIncrement.

Plies

Plies property.

PlotData

Gets the result table.

Ply

Gets or sets the Ply selection.

Position

Gets or sets the Position.

Properties

Gets the list of properties for this object.

ReportedFrequency

Gets the ReportedFrequency.

ScopingMethod

Gets or sets the ScopingMethod.

SetNumber

Gets or sets the Set Number.

SolutionCombinationDriver

Gets or sets the SolutionCombinationDriver.

SolverComponentIDs

Gets or sets the SolverComponentIDs.

StressStrainType

Gets or sets the StressStrainType.

SubScopeBy

Gets or sets the SubScopeBy.

Substep

Gets the Substep.

Suppressed

Gets or sets the Suppressed.

Surface

Surface property.

SweepingPhase

Gets or sets the SweepingPhase.

Time

Gets the Time.

TimeForMaximumOfMaximumValues

Get the Time for the maximum of maximum values.

TimeForMaximumOfMinimumValues

Get the Time for the maximum of minimum values.

TimeForMinimumOfMaximumValues

Get the Time for the minimum of maximum values.

TimeForMinimumOfMinimumValues

Get the Time for the minimum of minimum values.

VisibleProperties

Gets the list of properties that are visible for this object.

WaterfallPanelShowTextOnMosaic

Gets or sets the Waterfall Panel Mosaic Text Property.

Property detail#

property EquivalentCreepStrainRST.Amplitude: bool | None#

Gets or sets the Amplitude.

property EquivalentCreepStrainRST.Average: Ansys.Core.Units.Quantity | None#

Gets the Average.

property EquivalentCreepStrainRST.AverageAcrossBodies: bool | None#

Gets or sets the AverageAcrossBodies.

property EquivalentCreepStrainRST.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None#

Gets or sets the By.

property EquivalentCreepStrainRST.CalculateTimeHistory: bool | None#

Gets or sets the CalculateTimeHistory.

property EquivalentCreepStrainRST.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets the list of children.

property EquivalentCreepStrainRST.CombinationNumber: int | None#

Gets or sets the Combination Number for a Solution Combination result.

property EquivalentCreepStrainRST.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#

Gets the list of associated comments.

property EquivalentCreepStrainRST.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property EquivalentCreepStrainRST.CrackFrontNumber: int | None#

Gets or sets the CrackFrontNumber.

property EquivalentCreepStrainRST.CyclicMode: int | None#

Gets or sets the CyclicMode.

property EquivalentCreepStrainRST.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#

Gets the current DataModelObject's category.

property EquivalentCreepStrainRST.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None#

Gets or sets the DisplayOption.

property EquivalentCreepStrainRST.DisplayTime: Ansys.Core.Units.Quantity | None#

Gets or sets the DisplayTime.

property EquivalentCreepStrainRST.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None#

Gets or sets the DpfEvaluation.

property EquivalentCreepStrainRST.EnvironmentSelection: Ansys.ACT.Automation.Mechanical.Analysis | None#

Gets or sets the EnvironmentSelection.

property EquivalentCreepStrainRST.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#

Gets the list of associated figures.

property EquivalentCreepStrainRST.Frequency: Ansys.Core.Units.Quantity | None#

Gets or sets the Frequency.

property EquivalentCreepStrainRST.GlobalIDs: str | None#

Gets or sets the GlobalIDs.

property EquivalentCreepStrainRST.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None#

Gets or sets the GraphControlsXAxis.

property EquivalentCreepStrainRST.HarmonicIndex: int | None#

Gets or sets the HarmonicIndex.

property EquivalentCreepStrainRST.Identifier: str | None#

Gets or sets the Identifier.

property EquivalentCreepStrainRST.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#

Gets the list of associated images.

property EquivalentCreepStrainRST.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None#

Gets the internal object. For advanced usage only.

property EquivalentCreepStrainRST.IsSolved: bool | None#

Gets the IsSolved.

property EquivalentCreepStrainRST.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None#

Gets or sets the ItemType.

property EquivalentCreepStrainRST.IterationNumber: int | None#

Gets the IterationNumber.

property EquivalentCreepStrainRST.IterationStep: int | None#

Gets or sets the IterationStep.

property EquivalentCreepStrainRST.LoadMultiplier: float | None#

Gets the LoadMultiplier.

property EquivalentCreepStrainRST.LoadStep: int | None#

Gets the LoadStep.

property EquivalentCreepStrainRST.LoadStepForMaximumOfMaximumValues: int | None#

Get the Load Step for the maximum of maximum values.

property EquivalentCreepStrainRST.LoadStepForMaximumOfMinimumValues: int | None#

Get the Load Step for the maximum of minimum values.

property EquivalentCreepStrainRST.LoadStepForMinimumOfMaximumValues: int | None#

Get the Load Step for the minimum of maximum values.

property EquivalentCreepStrainRST.LoadStepForMinimumOfMinimumValues: int | None#

Get the Load Step for the minimum of minimum values.

property EquivalentCreepStrainRST.LoadStepNumber: int | None#

Gets or sets the LoadStepNumber.

property EquivalentCreepStrainRST.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the Location.

property EquivalentCreepStrainRST.Maximum: Ansys.Core.Units.Quantity | None#

Gets the Maximum.

property EquivalentCreepStrainRST.MaximumOccursOn: str | None#

Gets the MaximumOccursOn.

property EquivalentCreepStrainRST.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MaximumOfMaximumOverTime.

property EquivalentCreepStrainRST.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MaximumOfMinimumOverTime.

property EquivalentCreepStrainRST.Minimum: Ansys.Core.Units.Quantity | None#

Gets the Minimum.

property EquivalentCreepStrainRST.MinimumOccursOn: str | None#

Gets the MinimumOccursOn.

property EquivalentCreepStrainRST.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MinimumOfMaximumOverTime.

property EquivalentCreepStrainRST.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MinimumOfMinimumOverTime.

property EquivalentCreepStrainRST.Mode: int | None#

Gets or sets the Mode.

property EquivalentCreepStrainRST.NamedSelections: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets or sets the NamedSelections.

property EquivalentCreepStrainRST.Path: Ansys.ACT.Automation.Mechanical.Path | None#

Path property.

property EquivalentCreepStrainRST.PhaseIncrement: Ansys.Core.Units.Quantity | None#

Gets or sets the PhaseIncrement.

property EquivalentCreepStrainRST.Plies: Iterable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None#

Plies property.

property EquivalentCreepStrainRST.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None#

Gets the result table.

property EquivalentCreepStrainRST.Ply: Iterable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None#

Gets or sets the Ply selection.

property EquivalentCreepStrainRST.Position: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#

Gets or sets the Position.

property EquivalentCreepStrainRST.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties for this object.

property EquivalentCreepStrainRST.ReportedFrequency: Ansys.Core.Units.Quantity | None#

Gets the ReportedFrequency.

property EquivalentCreepStrainRST.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#

Gets or sets the ScopingMethod.

property EquivalentCreepStrainRST.SetNumber: int | None#

Gets or sets the Set Number.

property EquivalentCreepStrainRST.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None#

Gets or sets the SolutionCombinationDriver.

property EquivalentCreepStrainRST.SolverComponentIDs: str | None#

Gets or sets the SolverComponentIDs.

property EquivalentCreepStrainRST.StressStrainType: Ansys.Mechanical.DataModel.Enums.StressStrainType | None#

Gets or sets the StressStrainType.

property EquivalentCreepStrainRST.SubScopeBy: Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None#

Gets or sets the SubScopeBy.

property EquivalentCreepStrainRST.Substep: int | None#

Gets the Substep.

property EquivalentCreepStrainRST.Suppressed: bool | None#

Gets or sets the Suppressed.

property EquivalentCreepStrainRST.Surface: Ansys.ACT.Automation.Mechanical.Surface | None#

Surface property.

property EquivalentCreepStrainRST.SweepingPhase: Ansys.Core.Units.Quantity | None#

Gets or sets the SweepingPhase.

property EquivalentCreepStrainRST.Time: Ansys.Core.Units.Quantity | None#

Gets the Time.

property EquivalentCreepStrainRST.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the maximum of maximum values.

property EquivalentCreepStrainRST.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the maximum of minimum values.

property EquivalentCreepStrainRST.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the minimum of maximum values.

property EquivalentCreepStrainRST.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the minimum of minimum values.

property EquivalentCreepStrainRST.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties that are visible for this object.

property EquivalentCreepStrainRST.WaterfallPanelShowTextOnMosaic: bool | None#

Gets or sets the Waterfall Panel Mosaic Text Property.

Method detail#

EquivalentCreepStrainRST.Activate() None#

Activate the current object.

EquivalentCreepStrainRST.AddAlert() Ansys.ACT.Automation.Mechanical.Results.Alert#

Creates a new Alert

EquivalentCreepStrainRST.AddComment() Ansys.ACT.Automation.Mechanical.Comment#

Creates a new child Comment.

EquivalentCreepStrainRST.AddConvergence() Ansys.ACT.Automation.Mechanical.Results.Convergence#

Creates a new Convergence

EquivalentCreepStrainRST.AddFigure() Ansys.ACT.Automation.Mechanical.Figure#

Creates a new child Figure.

EquivalentCreepStrainRST.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image#
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
EquivalentCreepStrainRST.ClearGeneratedData() None#

Run the ClearGeneratedData action.

EquivalentCreepStrainRST.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None#

Copies all visible properties from this object to another.

EquivalentCreepStrainRST.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

CreateParameter method.

EquivalentCreepStrainRST.CreateResultsAtAllSets() List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]#

Creates results at all sets for results under a solution.

EquivalentCreepStrainRST.Delete() None#

Run the Delete action.

EquivalentCreepStrainRST.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Creates a copy of the current DataModelObject.

EquivalentCreepStrainRST.DuplicateWithoutResults() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Run the DuplicateWithoutResults action.

EquivalentCreepStrainRST.EvaluateAllResults() None#

Run the EvaluateAllResults action.

EquivalentCreepStrainRST.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) None#

Run the ExportAnimation action.

EquivalentCreepStrainRST.ExportToTextFile(filePath: str) None#

Run the ExportToTextFile action.

EquivalentCreepStrainRST.FetchRemoteResults() None#

Run the FetchRemoteResult action.

EquivalentCreepStrainRST.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType]#

Gets the list of children, filtered by type.

EquivalentCreepStrainRST.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Gets the parameter corresponding to the given property.

EquivalentCreepStrainRST.GroupAllSimilarChildren() None#

Run the GroupAllSimilarChildren action.

EquivalentCreepStrainRST.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#

Run the GroupSimilarObjects action.

EquivalentCreepStrainRST.PromoteToNamedSelection() Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]#

Run the PromoteToNamedSelection action.

EquivalentCreepStrainRST.PropertyByAPIName(name: str) Ansys.ACT.Automation.Mechanical.Property#
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
EquivalentCreepStrainRST.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property#

Get a property by its unique name.

EquivalentCreepStrainRST.RemoveParameter(propName: str) None#

Removes the parameter from the parameter set corresponding to the given property.

EquivalentCreepStrainRST.RenameBasedOnDefinition() None#

Run the RenameBasedOnDefinition action.