StrainProbe

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Results.ProbeResults.StrainProbe

Bases: object

Defines a StrainProbe.

Overview

Methods

ExportAnimation	Run the ExportAnimation action.
ClearGeneratedData	Run the ClearGeneratedData action.
DuplicateWithoutResults	Run the DuplicateWithoutResults action.
EvaluateAllResults	Run the EvaluateAllResults action.
SnapToMeshNodes	Snap the coordinates of probe result to the mesh nodes.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.
Delete	Run the Delete action.
GetChildren	Gets the list of children, filtered by type.
GetChildren	Gets the list of children, filtered by type.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
Activate	Activate the current object.
CopyTo	Copies all visible properties from this object to another.
Duplicate	Creates a copy of the current DataModelObject.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByName	Get a property by its unique name.
PropertyByAPIName	Get a property by its API name.
CreateParameter	Creates a new parameter for a Property.
GetParameter	Gets the parameter corresponding to the given property.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.

Properties

InternalObject	Gets the internal object. For advanced usage only.
EquivalentStrain	Gets the EquivalentStrain.
MaximumEquivalentStrain	Gets the MaximumEquivalentStrain.
MaximumMaximumPrincipalStrain	Gets the MaximumMaximumPrincipalStrain.
MaximumMiddlePrincipalStrain	Gets the MaximumMiddlePrincipalStrain.
MaximumMinimumPrincipalStrain	Gets the MaximumMinimumPrincipalStrain.
MaximumNormalXAxisStrain	Gets the MaximumNormalXAxisStrain.
MaximumNormalYAxisStrain	Gets the MaximumNormalYAxisStrain.
MaximumNormalZAxisStrain	Gets the MaximumNormalZAxisStrain.
MaximumPrincipalStrain	Gets the MaximumPrincipalStrain.
MaximumXYShearStrain	Gets the MaximumXYShearStrain.
MaximumXZShearStrain	Gets the MaximumXZShearStrain.
MaximumYZShearStrain	Gets the MaximumYZShearStrain.
MaximumStrainIntensity	Gets the MaximumStrainIntensity.
MiddlePrincipalStrain	Gets the MiddlePrincipalStrain.
MinimumEquivalentStrain	Gets the MinimumEquivalentStrain.
MinimumStrainMaximumPrincipal	Gets the MinimumStrainMaximumPrincipal.
MinimumMiddlePrincipalStrain	Gets the MinimumMiddlePrincipalStrain.
MinimumMinimumPrincipalStrain	Gets the MinimumMinimumPrincipalStrain.
MinimumNormalXAxisStrain	Gets the MinimumNormalXAxisStrain.
MinimumNormalYAxisStrain	Gets the MinimumNormalYAxisStrain.
MinimumNormalZAxisStrain	Gets the MinimumNormalZAxisStrain.
MinimumPrincipalStrain	Gets the MinimumPrincipalStrain.
MinimumXYShearStrain	Gets the MinimumXYShearStrain.
MinimumXZShearStrain	Gets the MinimumXZShearStrain.
MinimumYZShearStrain	Gets the MinimumYZShearStrain.
MinimumStrain	Gets the MinimumStrain.
MinimumStrainIntensity	Gets the MinimumStrainIntensity.
NormalXAxisStrain	Gets the NormalXAxisStrain.
NormalYAxisStrain	Gets the NormalYAxisStrain.
NormalZAxisStrain	Gets the NormalZAxisStrain.
XYShearStrain	Gets the XYShearStrain.
XZShearStrain	Gets the XZShearStrain.
YZShearStrain	Gets the YZShearStrain.
Strain	Gets the Strain.
StrainIntensity	Gets the StrainIntensity.
DataModelObjectCategory	Gets the current DataModelObject’s category.
Summation	Gets or sets the Summation.
LocationMethod	Gets or sets the LocationMethod.
GeometryLocation	Gets or sets the GeometryLocation.
CoordinateSystemSelection	Gets or sets the CoordinateSystemSelection.
BoundaryConditionSelection	Gets or sets the BoundaryConditionSelection. In order to select the option ‘WeakSprings’, please use the property ‘LocationMethod = LocationDefinitionMethod.WeakSprings’.
ContactRegionSelection	Gets or sets the ContactRegionSelection.
RemotePointSelection	Gets or sets the RemotePointSelection.
BeamSelection	Gets or sets the BeamSelection.
MeshConnectionSelection	Gets or sets the MeshConnectionSelection.
SurfaceSelection	Gets or sets the MeshConnectionSelection.
SpringSelection	Gets or sets the SpringSelection.
IsSolved	Gets the IsSolved.
Orientation	Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.
IterationNumber	Gets the IterationNumber.
LoadStep	Gets the LoadStep.
LoadStepNumber	Gets or sets the LoadStepNumber.
Substep	Gets the Substep.
DisplayTime	Gets or sets the DisplayTime.
MaximumTotal	Gets the MaximumTotal.
MaximumXAxis	Gets the MaximumXAxis.
MaximumYAxis	Gets the MaximumYAxis.
MaximumZAxis	Gets the MaximumZAxis.
MinimumTotal	Gets the MinimumTotal.
MinimumXAxis	Gets the MinimumXAxis.
MinimumYAxis	Gets the MinimumYAxis.
MinimumZAxis	Gets the MinimumZAxis.
Time	Gets the Time.
Total	Gets the Total.
XAxis	Gets the XAxis.
YAxis	Gets the YAxis.
ZAxis	Gets the ZAxis.
ResultSelection	Gets or sets the ResultSelection.
SpatialResolution	Gets or sets the SpatialResolution.
Type	Gets the Type.
DpfEvaluation	Gets or sets the DpfEvaluation.
Suppressed	Gets or sets the Suppressed.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
Figures	Gets the list of associated figures.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Properties	Gets the list of properties for this object.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property StrainProbe.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSProbeResultAuto | None

Gets the internal object. For advanced usage only.

property StrainProbe.EquivalentStrain: Ansys.Core.Units.Quantity | None

Gets the EquivalentStrain.

property StrainProbe.MaximumEquivalentStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumEquivalentStrain.

property StrainProbe.MaximumMaximumPrincipalStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumMaximumPrincipalStrain.

property StrainProbe.MaximumMiddlePrincipalStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumMiddlePrincipalStrain.

property StrainProbe.MaximumMinimumPrincipalStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumMinimumPrincipalStrain.

property StrainProbe.MaximumNormalXAxisStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumNormalXAxisStrain.

property StrainProbe.MaximumNormalYAxisStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumNormalYAxisStrain.

property StrainProbe.MaximumNormalZAxisStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumNormalZAxisStrain.

property StrainProbe.MaximumPrincipalStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumPrincipalStrain.

property StrainProbe.MaximumXYShearStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumXYShearStrain.

property StrainProbe.MaximumXZShearStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumXZShearStrain.

property StrainProbe.MaximumYZShearStrain: Ansys.Core.Units.Quantity | None

Gets the MaximumYZShearStrain.

property StrainProbe.MaximumStrainIntensity: Ansys.Core.Units.Quantity | None

Gets the MaximumStrainIntensity.

property StrainProbe.MiddlePrincipalStrain: Ansys.Core.Units.Quantity | None

Gets the MiddlePrincipalStrain.

property StrainProbe.MinimumEquivalentStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumEquivalentStrain.

property StrainProbe.MinimumStrainMaximumPrincipal: Ansys.Core.Units.Quantity | None

Gets the MinimumStrainMaximumPrincipal.

property StrainProbe.MinimumMiddlePrincipalStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumMiddlePrincipalStrain.

property StrainProbe.MinimumMinimumPrincipalStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumMinimumPrincipalStrain.

property StrainProbe.MinimumNormalXAxisStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumNormalXAxisStrain.

property StrainProbe.MinimumNormalYAxisStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumNormalYAxisStrain.

property StrainProbe.MinimumNormalZAxisStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumNormalZAxisStrain.

property StrainProbe.MinimumPrincipalStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumPrincipalStrain.

property StrainProbe.MinimumXYShearStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumXYShearStrain.

property StrainProbe.MinimumXZShearStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumXZShearStrain.

property StrainProbe.MinimumYZShearStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumYZShearStrain.

property StrainProbe.MinimumStrain: Ansys.Core.Units.Quantity | None

Gets the MinimumStrain.

property StrainProbe.MinimumStrainIntensity: Ansys.Core.Units.Quantity | None

Gets the MinimumStrainIntensity.

property StrainProbe.NormalXAxisStrain: Ansys.Core.Units.Quantity | None

Gets the NormalXAxisStrain.

property StrainProbe.NormalYAxisStrain: Ansys.Core.Units.Quantity | None

Gets the NormalYAxisStrain.

property StrainProbe.NormalZAxisStrain: Ansys.Core.Units.Quantity | None

Gets the NormalZAxisStrain.

property StrainProbe.XYShearStrain: Ansys.Core.Units.Quantity | None

Gets the XYShearStrain.

property StrainProbe.XZShearStrain: Ansys.Core.Units.Quantity | None

Gets the XZShearStrain.

property StrainProbe.YZShearStrain: Ansys.Core.Units.Quantity | None

Gets the YZShearStrain.

property StrainProbe.Strain: Ansys.Core.Units.Quantity | None

Gets the Strain.

property StrainProbe.StrainIntensity: Ansys.Core.Units.Quantity | None

Gets the StrainIntensity.

property StrainProbe.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject’s category.

property StrainProbe.Summation: Ansys.Mechanical.DataModel.Enums.MomentsAtSummationPointType | None

Gets or sets the Summation.

property StrainProbe.LocationMethod: Ansys.Mechanical.DataModel.Enums.LocationDefinitionMethod | None

Gets or sets the LocationMethod.

property StrainProbe.GeometryLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the GeometryLocation.

property StrainProbe.CoordinateSystemSelection: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the CoordinateSystemSelection.

property StrainProbe.BoundaryConditionSelection: Ansys.ACT.Automation.Mechanical.DataModelObject | None

Gets or sets the BoundaryConditionSelection. In order to select the option ‘WeakSprings’, please use the property ‘LocationMethod = LocationDefinitionMethod.WeakSprings’.

property StrainProbe.ContactRegionSelection: Ansys.ACT.Automation.Mechanical.Connections.ContactRegion | None

Gets or sets the ContactRegionSelection.

property StrainProbe.RemotePointSelection: Ansys.ACT.Automation.Mechanical.RemotePoint | None

Gets or sets the RemotePointSelection.

property StrainProbe.BeamSelection: Ansys.ACT.Automation.Mechanical.Connections.Beam | None

Gets or sets the BeamSelection.

property StrainProbe.MeshConnectionSelection: Ansys.ACT.Automation.Mechanical.MeshConnection | None

Gets or sets the MeshConnectionSelection.

property StrainProbe.SurfaceSelection: Ansys.ACT.Automation.Mechanical.Surface | None

Gets or sets the MeshConnectionSelection.

property StrainProbe.SpringSelection: Ansys.ACT.Automation.Mechanical.Connections.Spring | None

Gets or sets the SpringSelection.

property StrainProbe.IsSolved: System.Boolean | None

Gets the IsSolved.

property StrainProbe.Orientation: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.

property StrainProbe.IterationNumber: System.Int32 | None

Gets the IterationNumber.

property StrainProbe.LoadStep: System.Int32 | None

Gets the LoadStep.

property StrainProbe.LoadStepNumber: System.UInt32 | None

Gets or sets the LoadStepNumber.

property StrainProbe.Substep: System.Int32 | None

Gets the Substep.

property StrainProbe.DisplayTime: Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property StrainProbe.MaximumTotal: Ansys.Core.Units.Quantity | None

Gets the MaximumTotal.

property StrainProbe.MaximumXAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumXAxis.

property StrainProbe.MaximumYAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumYAxis.

property StrainProbe.MaximumZAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumZAxis.

property StrainProbe.MinimumTotal: Ansys.Core.Units.Quantity | None

Gets the MinimumTotal.

property StrainProbe.MinimumXAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumXAxis.

property StrainProbe.MinimumYAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumYAxis.

property StrainProbe.MinimumZAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumZAxis.

property StrainProbe.Time: Ansys.Core.Units.Quantity | None

Gets the Time.

property StrainProbe.Total: Ansys.Core.Units.Quantity | None

Gets the Total.

property StrainProbe.XAxis: Ansys.Core.Units.Quantity | None

Gets the XAxis.

property StrainProbe.YAxis: Ansys.Core.Units.Quantity | None

Gets the YAxis.

property StrainProbe.ZAxis: Ansys.Core.Units.Quantity | None

Gets the ZAxis.

property StrainProbe.ResultSelection: Ansys.Mechanical.DataModel.Enums.ProbeDisplayFilter | None

Gets or sets the ResultSelection.

property StrainProbe.SpatialResolution: Ansys.Mechanical.DataModel.Enums.MinimumOrMaximum | None

Gets or sets the SpatialResolution.

property StrainProbe.Type: Ansys.Mechanical.DataModel.Enums.ProbeResultType | None

Gets the Type.

property StrainProbe.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property StrainProbe.Suppressed: System.Boolean | None

Gets or sets the Suppressed.

property StrainProbe.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property StrainProbe.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property StrainProbe.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property StrainProbe.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property StrainProbe.InternalObject: System.Object | None

Gets the internal object. For advanced usage only.

property StrainProbe.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property StrainProbe.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

StrainProbe.ExportAnimation(filePath: System.String, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → System.Void

Run the ExportAnimation action.

StrainProbe.ClearGeneratedData() → System.Void

Run the ClearGeneratedData action.

StrainProbe.DuplicateWithoutResults() → Ansys.ACT.Automation.Mechanical.DataModelObject

Run the DuplicateWithoutResults action.

StrainProbe.EvaluateAllResults() → System.Void

Run the EvaluateAllResults action.

StrainProbe.SnapToMeshNodes() → System.Void

Snap the coordinates of probe result to the mesh nodes.

StrainProbe.RenameBasedOnDefinition() → System.Void

Run the RenameBasedOnDefinition action.

StrainProbe.Delete() → System.Void

Run the Delete action.

StrainProbe.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]

Gets the list of children, filtered by type.

StrainProbe.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]

Gets the list of children, filtered by type.

StrainProbe.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

StrainProbe.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

StrainProbe.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

StrainProbe.Activate() → System.Void

Activate the current object.

StrainProbe.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void

Copies all visible properties from this object to another.

StrainProbe.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

StrainProbe.GroupAllSimilarChildren() → System.Void

Run the GroupAllSimilarChildren action.

StrainProbe.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

StrainProbe.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

StrainProbe.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

StrainProbe.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

StrainProbe.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

StrainProbe.RemoveParameter(propName: System.String) → System.Void

Removes the parameter from the parameter set corresponding to the given property.