LinearizedEquivalentStress#

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Results.LinearizedStressResults.LinearizedEquivalentStress#

Bases: object

Defines a LinearizedEquivalentStress.

Overview#

Activate

Activate the current object.

AddAlert

Creates a new Alert

AddComment

Creates a new child Comment.

AddConvergence

Creates a new Convergence

AddFigure

Creates a new child Figure.

AddImage

Creates a new child Image.

ClearGeneratedData

Run the ClearGeneratedData action.

CopyTo

Copies all visible properties from this object to another.

CreateParameter

CreateParameter method.

CreateResultsAtAllSets

Creates results at all sets for results under a solution.

Delete

Run the Delete action.

Duplicate

Creates a copy of the current DataModelObject.

DuplicateWithoutResults

Run the DuplicateWithoutResults action.

EvaluateAllResults

Run the EvaluateAllResults action.

ExportAnimation

Run the ExportAnimation action.

ExportToTextFile

Run the ExportToTextFile action.

FetchRemoteResults

Run the FetchRemoteResult action.

GetChildren

Gets the list of children, filtered by type.

GetParameter

Gets the parameter corresponding to the given property.

GroupAllSimilarChildren

Run the GroupAllSimilarChildren action.

GroupSimilarObjects

Run the GroupSimilarObjects action.

PromoteToNamedSelection

Run the PromoteToNamedSelection action.

PropertyByAPIName

Get a property by its API name.

PropertyByName

Get a property by its unique name.

RemoveParameter

Removes the parameter from the parameter set corresponding to the given property.

RenameBasedOnDefinition

Run the RenameBasedOnDefinition action.

Amplitude

Gets or sets the Amplitude.

Average

Gets the Average.

AverageRadiusOfCurvature

Gets or sets the AverageRadiusOfCurvature.

BendingInside

Gets the BendingInside.

BendingOutside

Gets the BendingOutside.

By

Gets or sets the By.

CalculateTimeHistory

Gets or sets the CalculateTimeHistory.

Children

Gets the list of children.

CombinationNumber

Gets or sets the Combination Number for a Solution Combination result.

Comments

Gets the list of associated comments.

CoordinateSystem

Gets or sets the Coordinate System.

CrackFrontNumber

Gets or sets the CrackFrontNumber.

DataModelObjectCategory

Gets the current DataModelObject's category.

DisplayOption

Gets or sets the DisplayOption.

DisplayTime

Gets or sets the DisplayTime.

DpfEvaluation

Gets or sets the DpfEvaluation.

Figures

Gets the list of associated figures.

Frequency

Gets or sets the Frequency.

GlobalIDs

Gets or sets the GlobalIDs.

GraphControlsXAxis

Gets or sets the GraphControlsXAxis.

Identifier

Gets or sets the Identifier.

Images

Gets the list of associated images.

InternalObject

Gets the internal object. For advanced usage only.

IsSolved

Gets the IsSolved.

ItemType

Gets or sets the ItemType.

IterationNumber

Gets the IterationNumber.

Linearized2DBehavior

Gets or sets the Linearized2DBehavior.

LoadMultiplier

Gets the LoadMultiplier.

LoadStep

Gets the LoadStep.

LoadStepForMaximumOfMaximumValues

Get the Load Step for the maximum of maximum values.

LoadStepForMaximumOfMinimumValues

Get the Load Step for the maximum of minimum values.

LoadStepForMinimumOfMaximumValues

Get the Load Step for the minimum of maximum values.

LoadStepForMinimumOfMinimumValues

Get the Load Step for the minimum of minimum values.

LoadStepNumber

Gets or sets the LoadStepNumber.

Location

Gets or sets the Location.

Maximum

Gets the Maximum.

MaximumOccursOn

Gets the MaximumOccursOn.

MaximumOfMaximumOverTime

Gets the MaximumOfMaximumOverTime.

MaximumOfMinimumOverTime

Gets the MaximumOfMinimumOverTime.

Membrane

Gets the Membrane.

MembraneBendingCenter

Gets the MembraneBendingCenter.

MembraneBendingInside

Gets the MembraneBendingInside.

MembraneBendingOutside

Gets the MembraneBendingOutside.

Minimum

Gets the Minimum.

MinimumOccursOn

Gets the MinimumOccursOn.

MinimumOfMaximumOverTime

Gets the MinimumOfMaximumOverTime.

MinimumOfMinimumOverTime

Gets the MinimumOfMinimumOverTime.

NamedSelections

Gets or sets the NamedSelections.

NormalOrientation

Gets or sets the NormalOrientation.

Path

Path property.

PeakCenter

Gets the PeakCenter.

PeakInside

Gets the PeakInside.

PeakOutside

Gets the PeakOutside.

PlotData

Gets the result table.

Position

Gets or sets the Position.

Properties

Gets the list of properties for this object.

ScopingMethod

Gets or sets the ScopingMethod.

SetNumber

Gets or sets the Set Number.

SolutionCombinationDriver

Gets or sets the SolutionCombinationDriver.

SolverComponentIDs

Gets or sets the SolverComponentIDs.

StressStrainType

Gets or sets the StressStrainType.

Substep

Gets the Substep.

Subtype

Gets or sets the Subtype.

Suppressed

Gets or sets the Suppressed.

Surface

Surface property.

SweepingPhase

Gets or sets the SweepingPhase.

ThroughThicknessBendingStress

Gets or sets the ThroughThicknessBendingStress.

Time

Gets the Time.

TimeForMaximumOfMaximumValues

Get the Time for the maximum of maximum values.

TimeForMaximumOfMinimumValues

Get the Time for the maximum of minimum values.

TimeForMinimumOfMaximumValues

Get the Time for the minimum of maximum values.

TimeForMinimumOfMinimumValues

Get the Time for the minimum of minimum values.

TotalCenter

Gets the TotalCenter.

TotalInside

Gets the TotalInside.

TotalOutside

Gets the TotalOutside.

VisibleProperties

Gets the list of properties that are visible for this object.

WaterfallPanelShowTextOnMosaic

Gets or sets the Waterfall Panel Mosaic Text Property.

ZeroThroughThicknessBendingStress

Gets or sets the ZeroThroughThicknessBendingStress.

Property detail#

property LinearizedEquivalentStress.Amplitude: bool | None#

Gets or sets the Amplitude.

property LinearizedEquivalentStress.Average: Ansys.Core.Units.Quantity | None#

Gets the Average.

property LinearizedEquivalentStress.AverageRadiusOfCurvature: Ansys.Core.Units.Quantity | None#

Gets or sets the AverageRadiusOfCurvature.

property LinearizedEquivalentStress.BendingInside: Ansys.Core.Units.Quantity | None#

Gets the BendingInside.

property LinearizedEquivalentStress.BendingOutside: Ansys.Core.Units.Quantity | None#

Gets the BendingOutside.

property LinearizedEquivalentStress.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None#

Gets or sets the By.

property LinearizedEquivalentStress.CalculateTimeHistory: bool | None#

Gets or sets the CalculateTimeHistory.

property LinearizedEquivalentStress.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets the list of children.

property LinearizedEquivalentStress.CombinationNumber: int | None#

Gets or sets the Combination Number for a Solution Combination result.

property LinearizedEquivalentStress.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#

Gets the list of associated comments.

property LinearizedEquivalentStress.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property LinearizedEquivalentStress.CrackFrontNumber: int | None#

Gets or sets the CrackFrontNumber.

property LinearizedEquivalentStress.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#

Gets the current DataModelObject's category.

property LinearizedEquivalentStress.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None#

Gets or sets the DisplayOption.

property LinearizedEquivalentStress.DisplayTime: Ansys.Core.Units.Quantity | None#

Gets or sets the DisplayTime.

property LinearizedEquivalentStress.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None#

Gets or sets the DpfEvaluation.

property LinearizedEquivalentStress.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#

Gets the list of associated figures.

property LinearizedEquivalentStress.Frequency: Ansys.Core.Units.Quantity | None#

Gets or sets the Frequency.

property LinearizedEquivalentStress.GlobalIDs: str | None#

Gets or sets the GlobalIDs.

property LinearizedEquivalentStress.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None#

Gets or sets the GraphControlsXAxis.

property LinearizedEquivalentStress.Identifier: str | None#

Gets or sets the Identifier.

property LinearizedEquivalentStress.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#

Gets the list of associated images.

property LinearizedEquivalentStress.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None#

Gets the internal object. For advanced usage only.

property LinearizedEquivalentStress.IsSolved: bool | None#

Gets the IsSolved.

property LinearizedEquivalentStress.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None#

Gets or sets the ItemType.

property LinearizedEquivalentStress.IterationNumber: int | None#

Gets the IterationNumber.

property LinearizedEquivalentStress.Linearized2DBehavior: Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None#

Gets or sets the Linearized2DBehavior.

property LinearizedEquivalentStress.LoadMultiplier: float | None#

Gets the LoadMultiplier.

property LinearizedEquivalentStress.LoadStep: int | None#

Gets the LoadStep.

property LinearizedEquivalentStress.LoadStepForMaximumOfMaximumValues: int | None#

Get the Load Step for the maximum of maximum values.

property LinearizedEquivalentStress.LoadStepForMaximumOfMinimumValues: int | None#

Get the Load Step for the maximum of minimum values.

property LinearizedEquivalentStress.LoadStepForMinimumOfMaximumValues: int | None#

Get the Load Step for the minimum of maximum values.

property LinearizedEquivalentStress.LoadStepForMinimumOfMinimumValues: int | None#

Get the Load Step for the minimum of minimum values.

property LinearizedEquivalentStress.LoadStepNumber: int | None#

Gets or sets the LoadStepNumber.

property LinearizedEquivalentStress.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the Location.

property LinearizedEquivalentStress.Maximum: Ansys.Core.Units.Quantity | None#

Gets the Maximum.

property LinearizedEquivalentStress.MaximumOccursOn: str | None#

Gets the MaximumOccursOn.

property LinearizedEquivalentStress.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MaximumOfMaximumOverTime.

property LinearizedEquivalentStress.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MaximumOfMinimumOverTime.

property LinearizedEquivalentStress.Membrane: Ansys.Core.Units.Quantity | None#

Gets the Membrane.

property LinearizedEquivalentStress.MembraneBendingCenter: Ansys.Core.Units.Quantity | None#

Gets the MembraneBendingCenter.

property LinearizedEquivalentStress.MembraneBendingInside: Ansys.Core.Units.Quantity | None#

Gets the MembraneBendingInside.

property LinearizedEquivalentStress.MembraneBendingOutside: Ansys.Core.Units.Quantity | None#

Gets the MembraneBendingOutside.

property LinearizedEquivalentStress.Minimum: Ansys.Core.Units.Quantity | None#

Gets the Minimum.

property LinearizedEquivalentStress.MinimumOccursOn: str | None#

Gets the MinimumOccursOn.

property LinearizedEquivalentStress.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MinimumOfMaximumOverTime.

property LinearizedEquivalentStress.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#

Gets the MinimumOfMinimumOverTime.

property LinearizedEquivalentStress.NamedSelections: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets or sets the NamedSelections.

property LinearizedEquivalentStress.NormalOrientation: Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None#

Gets or sets the NormalOrientation.

property LinearizedEquivalentStress.Path: Ansys.ACT.Automation.Mechanical.Path | None#

Path property.

property LinearizedEquivalentStress.PeakCenter: Ansys.Core.Units.Quantity | None#

Gets the PeakCenter.

property LinearizedEquivalentStress.PeakInside: Ansys.Core.Units.Quantity | None#

Gets the PeakInside.

property LinearizedEquivalentStress.PeakOutside: Ansys.Core.Units.Quantity | None#

Gets the PeakOutside.

property LinearizedEquivalentStress.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None#

Gets the result table.

property LinearizedEquivalentStress.Position: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#

Gets or sets the Position.

property LinearizedEquivalentStress.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties for this object.

property LinearizedEquivalentStress.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#

Gets or sets the ScopingMethod.

property LinearizedEquivalentStress.SetNumber: int | None#

Gets or sets the Set Number.

property LinearizedEquivalentStress.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None#

Gets or sets the SolutionCombinationDriver.

property LinearizedEquivalentStress.SolverComponentIDs: str | None#

Gets or sets the SolverComponentIDs.

property LinearizedEquivalentStress.StressStrainType: Ansys.Mechanical.DataModel.Enums.StressStrainType | None#

Gets or sets the StressStrainType.

property LinearizedEquivalentStress.Substep: int | None#

Gets the Substep.

property LinearizedEquivalentStress.Subtype: Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None#

Gets or sets the Subtype.

property LinearizedEquivalentStress.Suppressed: bool | None#

Gets or sets the Suppressed.

property LinearizedEquivalentStress.Surface: Ansys.ACT.Automation.Mechanical.Surface | None#

Surface property.

property LinearizedEquivalentStress.SweepingPhase: Ansys.Core.Units.Quantity | None#

Gets or sets the SweepingPhase.

property LinearizedEquivalentStress.ThroughThicknessBendingStress: Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None#

Gets or sets the ThroughThicknessBendingStress.

property LinearizedEquivalentStress.Time: Ansys.Core.Units.Quantity | None#

Gets the Time.

property LinearizedEquivalentStress.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the maximum of maximum values.

property LinearizedEquivalentStress.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the maximum of minimum values.

property LinearizedEquivalentStress.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the minimum of maximum values.

property LinearizedEquivalentStress.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None#

Get the Time for the minimum of minimum values.

property LinearizedEquivalentStress.TotalCenter: Ansys.Core.Units.Quantity | None#

Gets the TotalCenter.

property LinearizedEquivalentStress.TotalInside: Ansys.Core.Units.Quantity | None#

Gets the TotalInside.

property LinearizedEquivalentStress.TotalOutside: Ansys.Core.Units.Quantity | None#

Gets the TotalOutside.

property LinearizedEquivalentStress.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties that are visible for this object.

property LinearizedEquivalentStress.WaterfallPanelShowTextOnMosaic: bool | None#

Gets or sets the Waterfall Panel Mosaic Text Property.

property LinearizedEquivalentStress.ZeroThroughThicknessBendingStress: bool | None#

Gets or sets the ZeroThroughThicknessBendingStress.

Method detail#

LinearizedEquivalentStress.Activate() None#

Activate the current object.

LinearizedEquivalentStress.AddAlert() Ansys.ACT.Automation.Mechanical.Results.Alert#

Creates a new Alert

LinearizedEquivalentStress.AddComment() Ansys.ACT.Automation.Mechanical.Comment#

Creates a new child Comment.

LinearizedEquivalentStress.AddConvergence() Ansys.ACT.Automation.Mechanical.Results.Convergence#

Creates a new Convergence

LinearizedEquivalentStress.AddFigure() Ansys.ACT.Automation.Mechanical.Figure#

Creates a new child Figure.

LinearizedEquivalentStress.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image#
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
LinearizedEquivalentStress.ClearGeneratedData() None#

Run the ClearGeneratedData action.

LinearizedEquivalentStress.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None#

Copies all visible properties from this object to another.

LinearizedEquivalentStress.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

CreateParameter method.

LinearizedEquivalentStress.CreateResultsAtAllSets() List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]#

Creates results at all sets for results under a solution.

LinearizedEquivalentStress.Delete() None#

Run the Delete action.

LinearizedEquivalentStress.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Creates a copy of the current DataModelObject.

LinearizedEquivalentStress.DuplicateWithoutResults() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Run the DuplicateWithoutResults action.

LinearizedEquivalentStress.EvaluateAllResults() None#

Run the EvaluateAllResults action.

LinearizedEquivalentStress.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) None#

Run the ExportAnimation action.

LinearizedEquivalentStress.ExportToTextFile(filePath: str) None#

Run the ExportToTextFile action.

LinearizedEquivalentStress.FetchRemoteResults() None#

Run the FetchRemoteResult action.

LinearizedEquivalentStress.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType]#

Gets the list of children, filtered by type.

LinearizedEquivalentStress.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Gets the parameter corresponding to the given property.

LinearizedEquivalentStress.GroupAllSimilarChildren() None#

Run the GroupAllSimilarChildren action.

LinearizedEquivalentStress.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#

Run the GroupSimilarObjects action.

LinearizedEquivalentStress.PromoteToNamedSelection() Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]#

Run the PromoteToNamedSelection action.

LinearizedEquivalentStress.PropertyByAPIName(name: str) Ansys.ACT.Automation.Mechanical.Property#
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
LinearizedEquivalentStress.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property#

Get a property by its unique name.

LinearizedEquivalentStress.RemoveParameter(propName: str) None#

Removes the parameter from the parameter set corresponding to the given property.

LinearizedEquivalentStress.RenameBasedOnDefinition() None#

Run the RenameBasedOnDefinition action.