`STLAMSupport`#

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.AdditiveManufacturing.STLAMSupport#

Bases: object

Defines a STLAMSupport.

Overview#

Methods

`ClearGeneratedData`	Run the ClearGeneratedData action.
`GenerateSupportBodies`	Generate Support Bodies.
`CreateNamedSelectionOfGeneratedElements`	Create a named selection of the generated elements.
`CreateNamedSelectionOfExternalElementFaces`	Create a named selection of the generated exterior element faces.
`ExportStl`	Export STL data.
`GetGeneratedBody`	Returns the generated body object
`ImportSTL`	Run the ImportSTL action.
`AddCommandSnippet`	Creates a new CommandSnippet
`Delete`	Run the Delete action.
`GetChildren`	Gets the list of children, filtered by type.
`GetChildren`	Gets the list of children, filtered by type.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`Activate`	Activate the current object.
`CopyTo`	Copies all visible properties from this object to another.
`Duplicate`	Creates a copy of the current DataModelObject.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PropertyByName`	Get a property by its unique name.
`PropertyByAPIName`	Get a property by its API name.
`CreateParameter`	Creates a new parameter for a Property.
`GetParameter`	Gets the parameter corresponding to the given property.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.

Properties

`VoxelSize`	Gets the VoxelSize.
`InternalObject`	Gets the internal object. For advanced usage only.
`Filename`	Gets or sets the Filename.
`SubsampleRate`	Gets or sets the SubsampleRate.
`ElementSize`	Gets the ElementSize.
`StlWallThickness`	Gets or sets the StlWallThickness.
`LengthUnits`	Gets or sets the LengthUnits.
`STLSupportView`	Gets or sets the STLSupportView.
`Source`	Gets or sets the Source.
`STLSupportType`	Gets or sets the STLSupportType.
`STL`	Gets or sets the STL.
`GeometrySelection`	Gets or sets the GeometrySelection.
`DataModelObjectCategory`	Gets the current DataModelObject’s category.
`ThermalConductivityMultipleInX`	Gets or sets the ThermalConductivityMultipleInX.
`ThermalConductivityMultipleInY`	Gets or sets the ThermalConductivityMultipleInY.
`ThermalConductivityMultipleInZ`	Gets or sets the ThermalConductivityMultipleInZ.
`DensityMultiple`	Gets or sets the DensityMultiple.
`MaterialMultiplier`	Gets or sets the MaterialMultiplier.
`ElasticModulusMultipleInX`	Gets or sets the ElasticModulusMultipleInX.
`ElasticModulusMultipleInY`	Gets or sets the ElasticModulusMultipleInY.
`ElasticModulusMultipleInZ`	Gets or sets the ElasticModulusMultipleInZ.
`ShearModulusMultipleInXY`	Gets or sets the ShearModulusMultipleInXY.
`ShearModulusMultipleInXZ`	Gets or sets the ShearModulusMultipleInXZ.
`ShearModulusMultipleInYZ`	Gets or sets the ShearModulusMultipleInYZ.
`WallSpacing`	Gets or sets the WallSpacing.
`WallThickness`	Gets or sets the WallThickness.
`Volume`	Gets or sets the Volume.
`MultiplierEntry`	Gets or sets the MultiplierEntry.
`SupportType`	Gets or sets the SupportType.
`Children`	Gets the list of children.
`Comments`	Gets the list of associated comments.
`Figures`	Gets the list of associated figures.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`Properties`	Gets the list of properties for this object.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Property detail#

property STLAMSupport.VoxelSize: Ansys.Core.Units.Quantity | None: Gets the VoxelSize.

property STLAMSupport.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSAMSupportAuto | None: Gets the internal object. For advanced usage only.

property STLAMSupport.Filename: System.String | None: Gets or sets the Filename.

property STLAMSupport.SubsampleRate: System.Int32 | None: Gets or sets the SubsampleRate.

property STLAMSupport.ElementSize: Ansys.Core.Units.Quantity | None: Gets the ElementSize.

property STLAMSupport.StlWallThickness: Ansys.Core.Units.Quantity | None: Gets or sets the StlWallThickness.

property STLAMSupport.LengthUnits: Ansys.Mechanical.DataModel.Enums.WBUnitSystemType | None: Gets or sets the LengthUnits.

property STLAMSupport.STLSupportView: Ansys.Mechanical.DataModel.Enums.STLSupportViewType | None: Gets or sets the STLSupportView.

property STLAMSupport.Source: Ansys.Mechanical.DataModel.Enums.AMStlSource | None: Gets or sets the Source.

property STLAMSupport.STLSupportType: Ansys.Mechanical.DataModel.Enums.AMSupportSTLType | None: Gets or sets the STLSupportType.

property STLAMSupport.STL: Ansys.ACT.Automation.Mechanical.STL | None: Gets or sets the STL.

property STLAMSupport.GeometrySelection: Ansys.ACT.Interfaces.Common.ISelectionInfo | None: Gets or sets the GeometrySelection.

property STLAMSupport.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None: Gets the current DataModelObject’s category.

property STLAMSupport.ThermalConductivityMultipleInX: System.Double | None: Gets or sets the ThermalConductivityMultipleInX.

property STLAMSupport.ThermalConductivityMultipleInY: System.Double | None: Gets or sets the ThermalConductivityMultipleInY.

property STLAMSupport.ThermalConductivityMultipleInZ: System.Double | None: Gets or sets the ThermalConductivityMultipleInZ.

property STLAMSupport.DensityMultiple: System.Double | None: Gets or sets the DensityMultiple.

property STLAMSupport.MaterialMultiplier: System.Double | None: Gets or sets the MaterialMultiplier.

property STLAMSupport.ElasticModulusMultipleInX: System.Double | None: Gets or sets the ElasticModulusMultipleInX.

property STLAMSupport.ElasticModulusMultipleInY: System.Double | None: Gets or sets the ElasticModulusMultipleInY.

property STLAMSupport.ElasticModulusMultipleInZ: System.Double | None: Gets or sets the ElasticModulusMultipleInZ.

property STLAMSupport.ShearModulusMultipleInXY: System.Double | None: Gets or sets the ShearModulusMultipleInXY.

property STLAMSupport.ShearModulusMultipleInXZ: System.Double | None: Gets or sets the ShearModulusMultipleInXZ.

property STLAMSupport.ShearModulusMultipleInYZ: System.Double | None: Gets or sets the ShearModulusMultipleInYZ.

property STLAMSupport.WallSpacing: Ansys.Core.Units.Quantity | None: Gets or sets the WallSpacing.

property STLAMSupport.WallThickness: Ansys.Core.Units.Quantity | None: Gets or sets the WallThickness.

property STLAMSupport.Volume: Ansys.Core.Units.Quantity | None: Gets or sets the Volume.

property STLAMSupport.MultiplierEntry: Ansys.Mechanical.DataModel.Enums.AMMultiplierEntryType | None: Gets or sets the MultiplierEntry.

property STLAMSupport.SupportType: Ansys.Mechanical.DataModel.Enums.AMSupportType | None: Gets or sets the SupportType.

property STLAMSupport.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets the list of children.

property STLAMSupport.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None: Gets the list of associated comments.

property STLAMSupport.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None: Gets the list of associated figures.

property STLAMSupport.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None: Gets the list of associated images.

property STLAMSupport.InternalObject: System.Object | None: Gets the internal object. For advanced usage only.

property STLAMSupport.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties for this object.

property STLAMSupport.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties that are visible for this object.

Method detail#

STLAMSupport.ClearGeneratedData() → System.Void: Run the ClearGeneratedData action.

STLAMSupport.GenerateSupportBodies(progress: Ansys.Mechanical.Application.Progress) → System.Void: Generate Support Bodies.

STLAMSupport.CreateNamedSelectionOfGeneratedElements() → System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.NamedSelection]: Create a named selection of the generated elements.

STLAMSupport.CreateNamedSelectionOfExternalElementFaces() → System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.NamedSelection]: Create a named selection of the generated exterior element faces.

STLAMSupport.ExportStl(filename: System.String, progress: Ansys.Mechanical.Application.Progress) → System.Void: Export STL data.

STLAMSupport.GetGeneratedBody() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Returns the generated body object

STLAMSupport.ImportSTL() → System.Void: Run the ImportSTL action.

STLAMSupport.AddCommandSnippet() → Ansys.ACT.Automation.Mechanical.CommandSnippet: Creates a new CommandSnippet

STLAMSupport.Delete() → System.Void: Run the Delete action.

STLAMSupport.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]: Gets the list of children, filtered by type.

STLAMSupport.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Gets the list of children, filtered by type.

STLAMSupport.AddComment() → Ansys.ACT.Automation.Mechanical.Comment: Creates a new child Comment.

STLAMSupport.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure: Creates a new child Figure.

STLAMSupport.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

STLAMSupport.Activate() → System.Void: Activate the current object.

STLAMSupport.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void: Copies all visible properties from this object to another.

STLAMSupport.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Creates a copy of the current DataModelObject.

STLAMSupport.GroupAllSimilarChildren() → System.Void: Run the GroupAllSimilarChildren action.

STLAMSupport.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder: Run the GroupSimilarObjects action.

STLAMSupport.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property: Get a property by its unique name.

STLAMSupport.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

STLAMSupport.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Creates a new parameter for a Property.

STLAMSupport.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Gets the parameter corresponding to the given property.

STLAMSupport.RemoveParameter(propName: System.String) → System.Void: Removes the parameter from the parameter set corresponding to the given property.