ContactRegion#

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Connections.ContactRegion#

Bases: object

Defines a ContactRegion.

Overview#

Activate

Activate the current object.

AddCommandSnippet

Creates a new CommandSnippet

AddComment

Creates a new child Comment.

AddFigure

Creates a new child Figure.

AddImage

Creates a new child Image.

AddPythonCodeEventBased

Creates a new PythonCodeEventBased

CopyTo

Copies all visible properties from this object to another.

CreateParameter

Creates a new parameter for a Property.

Delete

Run the Delete action.

Duplicate

Creates a copy of the current DataModelObject.

FlipContactTarget

Run the FlipContactTarget action.

GetChildren

Gets the list of children, filtered by type.

GetParameter

Gets the parameter corresponding to the given property.

GroupAllSimilarChildren

Run the GroupAllSimilarChildren action.

GroupSimilarObjects

Run the GroupSimilarObjects action.

LoadContactRegionSettings

Run the LoadContactRegionSettings action.

PromoteToNamedSelection

Run the PromoteToNamedSelection action.

PromoteToRemotePoint

Run the PromoteToRemotePoint action.

PropertyByAPIName

Get a property by its API name.

PropertyByName

Get a property by its unique name.

RemoveParameter

Removes the parameter from the parameter set corresponding to the given property.

RenameBasedOnDefinition

Run the RenameBasedOnDefinition action.

ResetToDefault

Run the ResetToDefault action.

SaveContactRegionSettings

Run the SaveContactRegionSettings action.

SearchConnectionsForDuplicatePairs

Run the SearchConnectionsForDuplicatePairs action.

SetDefaultAPDLNames

Run the SetDefaultAPDLNames action.

AutomaticDetectionValue

Gets the AutomaticDetectionValue.

AutomaticElectricCapacitance

Gets or sets the AutomaticElectricCapacitance.

AutomaticElectricConductance

Gets or sets the AutomaticElectricConductance.

AutomaticNormalStiffness

Gets or sets the AutomaticNormalStiffness.

AutomaticThermalConductance

Gets or sets the AutomaticThermalConductance.

BeamBeamDetection

Gets or sets the BeamBeamDetection.

BeamBeamModel

Gets or sets the BeamBeamModel.

BeamMaterialName

Gets or sets the BeamMaterialName.

BeamRadius

Gets or sets the BeamRadius.

Behavior

Gets or sets the Behavior.

BondedMaximumOffset

Gets or sets the BondedMaximumOffset.

Breakable

Gets or sets the Breakable.

Children

Gets the list of children.

Comments

Gets the list of associated comments.

ConstraintType

Gets or sets the ConstraintType.

ContactAPDLName

Gets or sets the ContactAPDLName.

ContactBodies

Gets the ContactBodies.

ContactCenterPoint

Gets or sets the ContactCenterPoint.

ContactEndingPoint

Gets or sets the ContactEndingPoint.

ContactFormulation

Gets or sets the ContactFormulation.

ContactGeometryCorrection

Gets or sets the ContactGeometryCorrection.

ContactOrientation

Gets or sets the ContactOrientation.

ContactShellFace

Gets or sets the ContactShellFace.

ContactStartingPoint

Gets or sets the ContactStartingPoint.

ContactType

Gets or sets the ContactType.

ContinuousDistanceComputation

Gets or sets the ContinuousDistanceComputation.

DataModelObjectCategory

Gets the current DataModelObject's category.

DecayConstant

Gets or sets the DecayConstant.

DetectionMethod

Gets or sets the DetectionMethod.

DisplayElementNormal

Gets or sets the DisplayElementNormal.

DynamicCoefficient

Gets or sets the DynamicCoefficient.

EdgeContactType

Gets or sets the EdgeContactType.

ElasticSlipTolerance

Gets or sets the ElasticSlipTolerance.

ElasticSlipToleranceFactor

Gets or sets the ElasticSlipToleranceFactor.

ElasticSlipToleranceValue

Gets or sets the ElasticSlipToleranceValue.

ElectricCapacitanceValue

Gets or sets the ElectricCapacitanceValue.

ElectricConductanceValue

Gets or sets the ElectricConductanceValue.

Figures

Gets the list of associated figures.

FlipContact

Gets or sets the FlipContact.

FlipTarget

Gets or sets the FlipTarget.

FrictionCoefficient

Gets or sets the FrictionCoefficient.

Handedness

Gets or sets the Handedness.

Images

Gets the list of associated images.

InitialClearance

Gets or sets the InitialClearance.

InitialClearanceFactor

Gets or sets the InitialClearanceFactor.

InitialClearanceValue

Gets or sets the InitialClearanceValue.

InterfaceTreatment

Gets or sets the InterfaceTreatment.

InternalObject

Gets the internal object. For advanced usage only.

LineLineDetection

Gets or sets the LineLineDetection.

Material

Gets or sets the Material.

MeanPitchDiameter

Gets or sets the MeanPitchDiameter.

NormalForceExponent

Gets or sets the NormalForceExponent.

NormalForceLimit

Gets or sets the NormalForceLimit.

NormalStiffnessFactor

Gets or sets the NormalStiffnessFactor.

NormalStiffnessValue

Gets or sets the NormalStiffnessValue.

NormalStiffnessValueType

Gets or sets the NormalStiffnessValueType.

NormalStressExponent

Gets or sets the NormalStressExponent.

NormalStressLimit

Gets or sets the NormalStressLimit.

PenetrationTolerance

Gets or sets the PenetrationTolerance.

PenetrationToleranceFactor

Gets or sets the PenetrationToleranceFactor.

PenetrationToleranceValue

Gets or sets the PenetrationToleranceValue.

PinballFactor

Gets or sets the PinballFactor.

PinballRadius

Gets or sets the PinballRadius.

PinballRegion

Gets or sets the PinballRegion.

PitchDistance

Gets or sets the PitchDistance.

PressureAtZeroPenetration

Gets or sets the PressureAtZeroPenetration.

PressureAtZeroPenetrationFactor

Gets or sets the PressureAtZeroPenetrationFactor.

PressureAtZeroPenetrationValue

Gets or sets the PressureAtZeroPenetrationValue.

Properties

Gets the list of properties for this object.

Protected

Gets or sets the Protected.

RBDContactDetection

Gets or sets the RBDContactDetection.

ReadOnly

Gets or sets the ReadOnly.

RestitutionFactor

Gets or sets the RestitutionFactor.

ScopeMode

Gets the ScopeMode.

SharedSourceBody

Gets or sets the SharedSourceBody.

SharedSourceReverseNormalLocation

Gets or sets the SharedSourceReverseNormalLocation.

SharedTargetBody

Gets or sets the SharedTargetBody.

SharedTargetReverseNormalLocation

Gets or sets the SharedTargetReverseNormalLocation.

ShearForceExponent

Gets or sets the ShearForceExponent.

ShearForceLimit

Gets or sets the ShearForceLimit.

ShearStressExponent

Gets or sets the ShearStressExponent.

ShearStressLimit

Gets or sets the ShearStressLimit.

ShellThicknessEffect

Gets or sets the ShellThicknessEffect.

SmallSliding

Gets or sets the SmallSliding.

SourceLocation

Gets or sets the SourceLocation.

StabilizationDampingFactor

Gets or sets the StabilizationDampingFactor.

Suppressed

Gets or sets the Suppressed.

TargetAPDLName

Gets or sets the TargetAPDLName.

TargetBodies

Gets the TargetBodies.

TargetCenterPoint

Gets or sets the TargetCenterPoint.

TargetEndingPoint

Gets or sets the TargetEndingPoint.

TargetGeometryCorrection

Gets or sets the TargetGeometryCorrection.

TargetLocation

Gets or sets the TargetLocation.

TargetOrientation

Gets or sets the TargetOrientation.

TargetShellFace

Gets or sets the TargetShellFace.

TargetStartingPoint

Gets or sets the TargetStartingPoint.

ThermalConductanceValue

Gets or sets the ThermalConductanceValue.

ThreadAngle

Gets or sets the ThreadAngle.

ThreadType

Gets or sets the ThreadType.

TimeStepControls

Gets or sets the TimeStepControls.

TrimContact

Gets or sets the TrimContact.

TrimTolerance

Gets or sets the TrimTolerance.

UpdateStiffness

Gets or sets the UpdateStiffness.

UserOffset

Gets or sets the UserOffset.

VisibleProperties

Gets the list of properties that are visible for this object.

Property detail#

property ContactRegion.AutomaticDetectionValue: Ansys.Core.Units.Quantity | None#

Gets the AutomaticDetectionValue.

property ContactRegion.AutomaticElectricCapacitance: bool | None#

Gets or sets the AutomaticElectricCapacitance.

property ContactRegion.AutomaticElectricConductance: bool | None#

Gets or sets the AutomaticElectricConductance.

property ContactRegion.AutomaticNormalStiffness: bool | None#

Gets or sets the AutomaticNormalStiffness.

property ContactRegion.AutomaticThermalConductance: bool | None#

Gets or sets the AutomaticThermalConductance.

property ContactRegion.BeamBeamDetection: Ansys.Mechanical.DataModel.Enums.BeamBeamContactDetectionType | None#

Gets or sets the BeamBeamDetection.

property ContactRegion.BeamBeamModel: Ansys.Mechanical.DataModel.Enums.BeamBeamModel | None#

Gets or sets the BeamBeamModel.

property ContactRegion.BeamMaterialName: str | None#

Gets or sets the BeamMaterialName.

property ContactRegion.BeamRadius: Ansys.Core.Units.Quantity | None#

Gets or sets the BeamRadius.

property ContactRegion.Behavior: Ansys.Mechanical.DataModel.Enums.ContactBehavior | None#

Gets or sets the Behavior.

property ContactRegion.BondedMaximumOffset: Ansys.Core.Units.Quantity | None#

Gets or sets the BondedMaximumOffset.

property ContactRegion.Breakable: Ansys.Mechanical.DataModel.Enums.BondedBreakableType | None#

Gets or sets the Breakable.

property ContactRegion.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets the list of children.

property ContactRegion.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#

Gets the list of associated comments.

property ContactRegion.ConstraintType: Ansys.Mechanical.DataModel.Enums.ContactConstraintType | None#

Gets or sets the ConstraintType.

property ContactRegion.ContactAPDLName: str | None#

Gets or sets the ContactAPDLName.

property ContactRegion.ContactBodies: str | None#

Gets the ContactBodies.

property ContactRegion.ContactCenterPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the ContactCenterPoint.

property ContactRegion.ContactEndingPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the ContactEndingPoint.

property ContactRegion.ContactFormulation: Ansys.Mechanical.DataModel.Enums.ContactFormulation | None#

Gets or sets the ContactFormulation.

property ContactRegion.ContactGeometryCorrection: Ansys.Mechanical.DataModel.Enums.ContactCorrection | None#

Gets or sets the ContactGeometryCorrection.

property ContactRegion.ContactOrientation: Ansys.Mechanical.DataModel.Enums.ContactOrientation | None#

Gets or sets the ContactOrientation.

property ContactRegion.ContactShellFace: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#

Gets or sets the ContactShellFace.

property ContactRegion.ContactStartingPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the ContactStartingPoint.

property ContactRegion.ContactType: Ansys.Mechanical.DataModel.Enums.ContactType | None#

Gets or sets the ContactType.

property ContactRegion.ContinuousDistanceComputation: Ansys.Mechanical.DataModel.Enums.YesNoProgrammedControlled | None#

Gets or sets the ContinuousDistanceComputation.

property ContactRegion.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#

Gets the current DataModelObject's category.

property ContactRegion.DecayConstant: float | None#

Gets or sets the DecayConstant.

property ContactRegion.DetectionMethod: Ansys.Mechanical.DataModel.Enums.ContactDetectionPoint | None#

Gets or sets the DetectionMethod.

property ContactRegion.DisplayElementNormal: bool | None#

Gets or sets the DisplayElementNormal.

property ContactRegion.DynamicCoefficient: float | None#

Gets or sets the DynamicCoefficient.

property ContactRegion.EdgeContactType: Ansys.Mechanical.DataModel.Enums.EdgeContactType | None#

Gets or sets the EdgeContactType.

property ContactRegion.ElasticSlipTolerance: Ansys.Mechanical.DataModel.Enums.ContactElasticSlipToleranceType | None#

Gets or sets the ElasticSlipTolerance.

property ContactRegion.ElasticSlipToleranceFactor: float | None#

Gets or sets the ElasticSlipToleranceFactor.

property ContactRegion.ElasticSlipToleranceValue: Ansys.Core.Units.Quantity | None#

Gets or sets the ElasticSlipToleranceValue.

property ContactRegion.ElectricCapacitanceValue: Ansys.Core.Units.Quantity | None#

Gets or sets the ElectricCapacitanceValue.

property ContactRegion.ElectricConductanceValue: Ansys.Core.Units.Quantity | None#

Gets or sets the ElectricConductanceValue.

property ContactRegion.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#

Gets the list of associated figures.

property ContactRegion.FlipContact: bool | None#

Gets or sets the FlipContact.

property ContactRegion.FlipTarget: bool | None#

Gets or sets the FlipTarget.

property ContactRegion.FrictionCoefficient: float | None#

Gets or sets the FrictionCoefficient.

property ContactRegion.Handedness: Ansys.Mechanical.DataModel.Enums.ContactBoltThreadHand | None#

Gets or sets the Handedness.

property ContactRegion.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#

Gets the list of associated images.

property ContactRegion.InitialClearance: Ansys.Mechanical.DataModel.Enums.InitialClearanceType | None#

Gets or sets the InitialClearance.

property ContactRegion.InitialClearanceFactor: float | None#

Gets or sets the InitialClearanceFactor.

property ContactRegion.InitialClearanceValue: Ansys.Core.Units.Quantity | None#

Gets or sets the InitialClearanceValue.

property ContactRegion.InterfaceTreatment: Ansys.Mechanical.DataModel.Enums.ContactInitialEffect | None#

Gets or sets the InterfaceTreatment.

property ContactRegion.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSContactRegionAuto | None#

Gets the internal object. For advanced usage only.

property ContactRegion.LineLineDetection: Ansys.Mechanical.DataModel.Enums.LineLineContactDetectionType | None#

Gets or sets the LineLineDetection.

property ContactRegion.Material: str | None#

Gets or sets the Material.

property ContactRegion.MeanPitchDiameter: Ansys.Core.Units.Quantity | None#

Gets or sets the MeanPitchDiameter.

property ContactRegion.NormalForceExponent: float | None#

Gets or sets the NormalForceExponent.

property ContactRegion.NormalForceLimit: Ansys.Core.Units.Quantity | None#

Gets or sets the NormalForceLimit.

property ContactRegion.NormalStiffnessFactor: float | None#

Gets or sets the NormalStiffnessFactor.

property ContactRegion.NormalStiffnessValue: Ansys.Core.Units.Quantity | None#

Gets or sets the NormalStiffnessValue.

property ContactRegion.NormalStiffnessValueType: Ansys.Mechanical.DataModel.Enums.ElementControlsNormalStiffnessType | None#

Gets or sets the NormalStiffnessValueType.

property ContactRegion.NormalStressExponent: float | None#

Gets or sets the NormalStressExponent.

property ContactRegion.NormalStressLimit: Ansys.Core.Units.Quantity | None#

Gets or sets the NormalStressLimit.

property ContactRegion.PenetrationTolerance: Ansys.Mechanical.DataModel.Enums.ContactPenetrationToleranceType | None#

Gets or sets the PenetrationTolerance.

property ContactRegion.PenetrationToleranceFactor: float | None#

Gets or sets the PenetrationToleranceFactor.

property ContactRegion.PenetrationToleranceValue: Ansys.Core.Units.Quantity | None#

Gets or sets the PenetrationToleranceValue.

property ContactRegion.PinballFactor: float | None#

Gets or sets the PinballFactor.

property ContactRegion.PinballRadius: Ansys.Core.Units.Quantity | None#

Gets or sets the PinballRadius.

property ContactRegion.PinballRegion: Ansys.Mechanical.DataModel.Enums.ContactPinballType | None#

Gets or sets the PinballRegion.

property ContactRegion.PitchDistance: Ansys.Core.Units.Quantity | None#

Gets or sets the PitchDistance.

property ContactRegion.PressureAtZeroPenetration: Ansys.Mechanical.DataModel.Enums.PressureAtZeroPenetrationType | None#

Gets or sets the PressureAtZeroPenetration.

property ContactRegion.PressureAtZeroPenetrationFactor: float | None#

Gets or sets the PressureAtZeroPenetrationFactor.

property ContactRegion.PressureAtZeroPenetrationValue: Ansys.Core.Units.Quantity | None#

Gets or sets the PressureAtZeroPenetrationValue.

property ContactRegion.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties for this object.

property ContactRegion.Protected: bool | None#

Gets or sets the Protected.

property ContactRegion.RBDContactDetection: Ansys.Mechanical.DataModel.Enums.DSRBDContactDetection | None#

Gets or sets the RBDContactDetection.

property ContactRegion.ReadOnly: bool | None#

Gets or sets the ReadOnly.

property ContactRegion.RestitutionFactor: float | None#

Gets or sets the RestitutionFactor.

property ContactRegion.ScopeMode: Ansys.Mechanical.DataModel.Enums.AutomaticOrManual | None#

Gets the ScopeMode.

property ContactRegion.SharedSourceBody: Ansys.ACT.Automation.Mechanical.Body | None#

Gets or sets the SharedSourceBody.

property ContactRegion.SharedSourceReverseNormalLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the SharedSourceReverseNormalLocation.

property ContactRegion.SharedTargetBody: Ansys.ACT.Automation.Mechanical.Body | None#

Gets or sets the SharedTargetBody.

property ContactRegion.SharedTargetReverseNormalLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the SharedTargetReverseNormalLocation.

property ContactRegion.ShearForceExponent: float | None#

Gets or sets the ShearForceExponent.

property ContactRegion.ShearForceLimit: Ansys.Core.Units.Quantity | None#

Gets or sets the ShearForceLimit.

property ContactRegion.ShearStressExponent: float | None#

Gets or sets the ShearStressExponent.

property ContactRegion.ShearStressLimit: Ansys.Core.Units.Quantity | None#

Gets or sets the ShearStressLimit.

property ContactRegion.ShellThicknessEffect: bool | None#

Gets or sets the ShellThicknessEffect.

property ContactRegion.SmallSliding: Ansys.Mechanical.DataModel.Enums.ContactSmallSlidingType | None#

Gets or sets the SmallSliding.

property ContactRegion.SourceLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the SourceLocation.

property ContactRegion.StabilizationDampingFactor: float | None#

Gets or sets the StabilizationDampingFactor.

property ContactRegion.Suppressed: bool | None#

Gets or sets the Suppressed.

property ContactRegion.TargetAPDLName: str | None#

Gets or sets the TargetAPDLName.

property ContactRegion.TargetBodies: str | None#

Gets the TargetBodies.

property ContactRegion.TargetCenterPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the TargetCenterPoint.

property ContactRegion.TargetEndingPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the TargetEndingPoint.

property ContactRegion.TargetGeometryCorrection: Ansys.Mechanical.DataModel.Enums.TargetCorrection | None#

Gets or sets the TargetGeometryCorrection.

property ContactRegion.TargetLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#

Gets or sets the TargetLocation.

property ContactRegion.TargetOrientation: Ansys.Mechanical.DataModel.Enums.TargetOrientation | None#

Gets or sets the TargetOrientation.

property ContactRegion.TargetShellFace: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#

Gets or sets the TargetShellFace.

property ContactRegion.TargetStartingPoint: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#

Gets or sets the TargetStartingPoint.

property ContactRegion.ThermalConductanceValue: Ansys.Core.Units.Quantity | None#

Gets or sets the ThermalConductanceValue.

property ContactRegion.ThreadAngle: Ansys.Core.Units.Quantity | None#

Gets or sets the ThreadAngle.

property ContactRegion.ThreadType: Ansys.Mechanical.DataModel.Enums.ContactBoltThreadType | None#

Gets or sets the ThreadType.

property ContactRegion.TimeStepControls: Ansys.Mechanical.DataModel.Enums.ContactTimeStepControls | None#

Gets or sets the TimeStepControls.

property ContactRegion.TrimContact: Ansys.Mechanical.DataModel.Enums.ContactTrimType | None#

Gets or sets the TrimContact.

property ContactRegion.TrimTolerance: Ansys.Core.Units.Quantity | None#

Gets or sets the TrimTolerance.

property ContactRegion.UpdateStiffness: Ansys.Mechanical.DataModel.Enums.UpdateContactStiffness | None#

Gets or sets the UpdateStiffness.

property ContactRegion.UserOffset: Ansys.Core.Units.Quantity | None#

Gets or sets the UserOffset.

property ContactRegion.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties that are visible for this object.

Method detail#

ContactRegion.Activate() None#

Activate the current object.

ContactRegion.AddCommandSnippet() Ansys.ACT.Automation.Mechanical.CommandSnippet#

Creates a new CommandSnippet

ContactRegion.AddComment() Ansys.ACT.Automation.Mechanical.Comment#

Creates a new child Comment.

ContactRegion.AddFigure() Ansys.ACT.Automation.Mechanical.Figure#

Creates a new child Figure.

ContactRegion.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image#
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
ContactRegion.AddPythonCodeEventBased() Ansys.ACT.Automation.Mechanical.PythonCodeEventBased#

Creates a new PythonCodeEventBased

ContactRegion.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None#

Copies all visible properties from this object to another.

ContactRegion.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Creates a new parameter for a Property.

ContactRegion.Delete() None#

Run the Delete action.

ContactRegion.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Creates a copy of the current DataModelObject.

ContactRegion.FlipContactTarget() None#

Run the FlipContactTarget action.

ContactRegion.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType]#

Gets the list of children, filtered by type.

ContactRegion.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Gets the parameter corresponding to the given property.

ContactRegion.GroupAllSimilarChildren() None#

Run the GroupAllSimilarChildren action.

ContactRegion.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#

Run the GroupSimilarObjects action.

ContactRegion.LoadContactRegionSettings(fName: str) None#

Run the LoadContactRegionSettings action.

ContactRegion.PromoteToNamedSelection() Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]#

Run the PromoteToNamedSelection action.

ContactRegion.PromoteToRemotePoint() Iterable[Ansys.ACT.Automation.Mechanical.RemotePoint]#

Run the PromoteToRemotePoint action.

ContactRegion.PropertyByAPIName(name: str) Ansys.ACT.Automation.Mechanical.Property#
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
ContactRegion.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property#

Get a property by its unique name.

ContactRegion.RemoveParameter(propName: str) None#

Removes the parameter from the parameter set corresponding to the given property.

ContactRegion.RenameBasedOnDefinition() None#

Run the RenameBasedOnDefinition action.

ContactRegion.ResetToDefault() None#

Run the ResetToDefault action.

ContactRegion.SaveContactRegionSettings(fName: str) None#

Run the SaveContactRegionSettings action.

ContactRegion.SearchConnectionsForDuplicatePairs() None#

Run the SearchConnectionsForDuplicatePairs action.

ContactRegion.SetDefaultAPDLNames() None#

Run the SetDefaultAPDLNames action.