FractureToolProbe

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Results.FractureToolResults.FractureToolProbe

Bases: object

Defines a FractureToolProbe.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
DuplicateWithoutResults	Run the DuplicateWithoutResults action.
EvaluateAllResults	Run the EvaluateAllResults action.
ExportAnimation	Run the ExportAnimation action.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.
SnapToMeshNodes	Snap the coordinates of probe result to the mesh nodes.

Properties

ActiveContour	Gets or sets the ActiveContour.
BeamSelection	Gets or sets the BeamSelection.
BoundaryConditionSelection	Gets or sets the BoundaryConditionSelection. In order to select the option 'WeakSprings', please use the property 'LocationMethod = LocationDefinitionMethod.WeakSprings'.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
ContactRegionSelection	Gets or sets the ContactRegionSelection.
CoordinateSystemSelection	Gets or sets the CoordinateSystemSelection.
CrackLengthPercentage	Gets or sets the CrackLengthPercentage.
DataModelObjectCategory	Gets the current DataModelObject's category.
DisplayTime	Gets or sets the DisplayTime.
DpfEvaluation	Gets or sets the DpfEvaluation.
Figures	Gets the list of associated figures.
GeometryLocation	Gets or sets the GeometryLocation.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
IsSolved	Gets the IsSolved.
IterationNumber	Gets the IterationNumber.
LoadStep	Gets the LoadStep.
LoadStepNumber	Gets or sets the LoadStepNumber.
LocationMethod	Gets or sets the LocationMethod.
MaximumTotal	Gets the MaximumTotal.
MaximumXAxis	Gets the MaximumXAxis.
MaximumYAxis	Gets the MaximumYAxis.
MaximumZAxis	Gets the MaximumZAxis.
MeshConnectionSelection	Gets or sets the MeshConnectionSelection.
MinimumTotal	Gets the MinimumTotal.
MinimumXAxis	Gets the MinimumXAxis.
MinimumYAxis	Gets the MinimumYAxis.
MinimumZAxis	Gets the MinimumZAxis.
Orientation	Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.
Properties	Gets the list of properties for this object.
RemotePointSelection	Gets or sets the RemotePointSelection.
ResultSelection	Gets or sets the ResultSelection.
SolverID	Gets or sets the SolverID.
SpatialResolution	Gets or sets the SpatialResolution.
SpringSelection	Gets or sets the SpringSelection.
Substep	Gets the Substep.
Summation	Gets or sets the Summation.
Suppressed	Gets or sets the Suppressed.
SurfaceSelection	Gets or sets the MeshConnectionSelection.
Time	Gets the Time.
Total	Gets the Total.
Type	Gets the Type.
VisibleProperties	Gets the list of properties that are visible for this object.
XAxis	Gets the XAxis.
YAxis	Gets the YAxis.
ZAxis	Gets the ZAxis.

Property detail

property FractureToolProbe.ActiveContour: int | None

Gets or sets the ActiveContour.

property FractureToolProbe.BeamSelection: Ansys.ACT.Automation.Mechanical.Connections.Beam | None

Gets or sets the BeamSelection.

property FractureToolProbe.BoundaryConditionSelection: Ansys.ACT.Automation.Mechanical.DataModelObject | None

Gets or sets the BoundaryConditionSelection. In order to select the option 'WeakSprings', please use the property 'LocationMethod = LocationDefinitionMethod.WeakSprings'.

property FractureToolProbe.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property FractureToolProbe.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property FractureToolProbe.ContactRegionSelection: Ansys.ACT.Automation.Mechanical.Connections.ContactRegion | None

Gets or sets the ContactRegionSelection.

property FractureToolProbe.CoordinateSystemSelection: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the CoordinateSystemSelection.

property FractureToolProbe.CrackLengthPercentage: int | None

Gets or sets the CrackLengthPercentage.

property FractureToolProbe.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property FractureToolProbe.DisplayTime: Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property FractureToolProbe.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property FractureToolProbe.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property FractureToolProbe.GeometryLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the GeometryLocation.

property FractureToolProbe.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property FractureToolProbe.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSProbeResultAuto | None

Gets the internal object. For advanced usage only.

property FractureToolProbe.IsSolved: bool | None

Gets the IsSolved.

property FractureToolProbe.IterationNumber: int | None

Gets the IterationNumber.

property FractureToolProbe.LoadStep: int | None

Gets the LoadStep.

property FractureToolProbe.LoadStepNumber: int | None

Gets or sets the LoadStepNumber.

property FractureToolProbe.LocationMethod: Ansys.Mechanical.DataModel.Enums.LocationDefinitionMethod | None

Gets or sets the LocationMethod.

property FractureToolProbe.MaximumTotal: Ansys.Core.Units.Quantity | None

Gets the MaximumTotal.

property FractureToolProbe.MaximumXAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumXAxis.

property FractureToolProbe.MaximumYAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumYAxis.

property FractureToolProbe.MaximumZAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumZAxis.

property FractureToolProbe.MeshConnectionSelection: Ansys.ACT.Automation.Mechanical.MeshConnection | None

Gets or sets the MeshConnectionSelection.

property FractureToolProbe.MinimumTotal: Ansys.Core.Units.Quantity | None

Gets the MinimumTotal.

property FractureToolProbe.MinimumXAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumXAxis.

property FractureToolProbe.MinimumYAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumYAxis.

property FractureToolProbe.MinimumZAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumZAxis.

property FractureToolProbe.Orientation: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.

property FractureToolProbe.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property FractureToolProbe.RemotePointSelection: Ansys.ACT.Automation.Mechanical.RemotePoint | None

Gets or sets the RemotePointSelection.

property FractureToolProbe.ResultSelection: Ansys.Mechanical.DataModel.Enums.ProbeDisplayFilter | None

Gets or sets the ResultSelection.

property FractureToolProbe.SolverID: int | None

Gets or sets the SolverID.

property FractureToolProbe.SpatialResolution: Ansys.Mechanical.DataModel.Enums.MinimumOrMaximum | None

Gets or sets the SpatialResolution.

property FractureToolProbe.SpringSelection: Ansys.ACT.Automation.Mechanical.Connections.Spring | None

Gets or sets the SpringSelection.

property FractureToolProbe.Substep: int | None

Gets the Substep.

property FractureToolProbe.Summation: Ansys.Mechanical.DataModel.Enums.MomentsAtSummationPointType | None

Gets or sets the Summation.

property FractureToolProbe.Suppressed: bool | None

Gets or sets the Suppressed.

property FractureToolProbe.SurfaceSelection: Ansys.ACT.Automation.Mechanical.Surface | None

Gets or sets the MeshConnectionSelection.

property FractureToolProbe.Time: Ansys.Core.Units.Quantity | None

Gets the Time.

property FractureToolProbe.Total: Ansys.Core.Units.Quantity | None

Gets the Total.

property FractureToolProbe.Type: Ansys.Mechanical.DataModel.Enums.ProbeResultType | None

Gets the Type.

property FractureToolProbe.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property FractureToolProbe.XAxis: Ansys.Core.Units.Quantity | None

Gets the XAxis.

property FractureToolProbe.YAxis: Ansys.Core.Units.Quantity | None

Gets the YAxis.

property FractureToolProbe.ZAxis: Ansys.Core.Units.Quantity | None

Gets the ZAxis.

Method detail

FractureToolProbe.Activate() → None

Activate the current object.

FractureToolProbe.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

FractureToolProbe.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

FractureToolProbe.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

FractureToolProbe.ClearGeneratedData() → None

Run the ClearGeneratedData action.

FractureToolProbe.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

FractureToolProbe.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

FractureToolProbe.Delete() → None

Run the Delete action.

FractureToolProbe.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

FractureToolProbe.DuplicateWithoutResults() → Ansys.ACT.Automation.Mechanical.DataModelObject

Run the DuplicateWithoutResults action.

FractureToolProbe.EvaluateAllResults() → None

Run the EvaluateAllResults action.

FractureToolProbe.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None

Run the ExportAnimation action.

FractureToolProbe.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

FractureToolProbe.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

FractureToolProbe.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

FractureToolProbe.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

FractureToolProbe.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

FractureToolProbe.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

FractureToolProbe.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

FractureToolProbe.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.

FractureToolProbe.SnapToMeshNodes() → None

Snap the coordinates of probe result to the mesh nodes.