RotationProbe

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.Results.ProbeResults.RotationProbe

Bases: object

Defines a RotationProbe.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
DuplicateWithoutResults	Run the DuplicateWithoutResults action.
EvaluateAllResults	Run the EvaluateAllResults action.
ExportAnimation	Run the ExportAnimation action.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.
SnapToMeshNodes	Snap the coordinates of probe result to the mesh nodes.

Properties

BeamSelection	Gets or sets the BeamSelection.
BoundaryConditionSelection	Gets or sets the BoundaryConditionSelection. In order to select the option 'WeakSprings', please use the property 'LocationMethod = LocationDefinitionMethod.WeakSprings'.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
ContactRegionSelection	Gets or sets the ContactRegionSelection.
CoordinateSystemSelection	Gets or sets the CoordinateSystemSelection.
DataModelObjectCategory	Gets the current DataModelObject's category.
DisplayTime	Gets or sets the DisplayTime.
DpfEvaluation	Gets or sets the DpfEvaluation.
Figures	Gets the list of associated figures.
GeometryLocation	Gets or sets the GeometryLocation.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
IsSolved	Gets the IsSolved.
IterationNumber	Gets the IterationNumber.
LoadStep	Gets the LoadStep.
LoadStepNumber	Gets or sets the LoadStepNumber.
LocationMethod	Gets or sets the LocationMethod.
MaximumTotal	Gets the MaximumTotal.
MaximumXAxis	Gets the MaximumXAxis.
MaximumXAxisRotation	Gets the MaximumXAxisRotation.
MaximumYAxis	Gets the MaximumYAxis.
MaximumYAxisRotation	Gets the MaximumYAxisRotation.
MaximumZAxis	Gets the MaximumZAxis.
MaximumZAxisRotation	Gets the MaximumZAxisRotation.
MeshConnectionSelection	Gets or sets the MeshConnectionSelection.
MinimumTotal	Gets the MinimumTotal.
MinimumXAxis	Gets the MinimumXAxis.
MinimumXAxisRotation	Gets the MinimumXAxisRotation.
MinimumYAxis	Gets the MinimumYAxis.
MinimumYAxisRotation	Gets the MinimumYAxisRotation.
MinimumZAxis	Gets the MinimumZAxis.
MinimumZAxisRotation	Gets the MinimumZAxisRotation.
Orientation	Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.
Properties	Gets the list of properties for this object.
RemotePointSelection	Gets or sets the RemotePointSelection.
ResultSelection	Gets or sets the ResultSelection.
SpatialResolution	Gets or sets the SpatialResolution.
SpringSelection	Gets or sets the SpringSelection.
Substep	Gets the Substep.
Summation	Gets or sets the Summation.
Suppressed	Gets or sets the Suppressed.
SurfaceSelection	Gets or sets the MeshConnectionSelection.
Time	Gets the Time.
Total	Gets the Total.
Type	Gets the Type.
VisibleProperties	Gets the list of properties that are visible for this object.
XAxis	Gets the XAxis.
XAxisRotation	Gets the XAxisRotation.
YAxis	Gets the YAxis.
YAxisRotation	Gets the YAxisRotation.
ZAxis	Gets the ZAxis.
ZAxisRotation	Gets the ZAxisRotation.

Property detail

property RotationProbe.BeamSelection: Ansys.ACT.Automation.Mechanical.Connections.Beam | None

Gets or sets the BeamSelection.

property RotationProbe.BoundaryConditionSelection: Ansys.ACT.Automation.Mechanical.DataModelObject | None

Gets or sets the BoundaryConditionSelection. In order to select the option 'WeakSprings', please use the property 'LocationMethod = LocationDefinitionMethod.WeakSprings'.

property RotationProbe.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property RotationProbe.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property RotationProbe.ContactRegionSelection: Ansys.ACT.Automation.Mechanical.Connections.ContactRegion | None

Gets or sets the ContactRegionSelection.

property RotationProbe.CoordinateSystemSelection: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the CoordinateSystemSelection.

property RotationProbe.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property RotationProbe.DisplayTime: Ansys.Core.Units.Quantity | None

Gets or sets the DisplayTime.

property RotationProbe.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None

Gets or sets the DpfEvaluation.

property RotationProbe.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property RotationProbe.GeometryLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the GeometryLocation.

property RotationProbe.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property RotationProbe.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSProbeResultAuto | None

Gets the internal object. For advanced usage only.

property RotationProbe.IsSolved: bool | None

Gets the IsSolved.

property RotationProbe.IterationNumber: int | None

Gets the IterationNumber.

property RotationProbe.LoadStep: int | None

Gets the LoadStep.

property RotationProbe.LoadStepNumber: int | None

Gets or sets the LoadStepNumber.

property RotationProbe.LocationMethod: Ansys.Mechanical.DataModel.Enums.LocationDefinitionMethod | None

Gets or sets the LocationMethod.

property RotationProbe.MaximumTotal: Ansys.Core.Units.Quantity | None

Gets the MaximumTotal.

property RotationProbe.MaximumXAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumXAxis.

property RotationProbe.MaximumXAxisRotation: Ansys.Core.Units.Quantity | None

Gets the MaximumXAxisRotation.

property RotationProbe.MaximumYAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumYAxis.

property RotationProbe.MaximumYAxisRotation: Ansys.Core.Units.Quantity | None

Gets the MaximumYAxisRotation.

property RotationProbe.MaximumZAxis: Ansys.Core.Units.Quantity | None

Gets the MaximumZAxis.

property RotationProbe.MaximumZAxisRotation: Ansys.Core.Units.Quantity | None

Gets the MaximumZAxisRotation.

property RotationProbe.MeshConnectionSelection: Ansys.ACT.Automation.Mechanical.MeshConnection | None

Gets or sets the MeshConnectionSelection.

property RotationProbe.MinimumTotal: Ansys.Core.Units.Quantity | None

Gets the MinimumTotal.

property RotationProbe.MinimumXAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumXAxis.

property RotationProbe.MinimumXAxisRotation: Ansys.Core.Units.Quantity | None

Gets the MinimumXAxisRotation.

property RotationProbe.MinimumYAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumYAxis.

property RotationProbe.MinimumYAxisRotation: Ansys.Core.Units.Quantity | None

Gets the MinimumYAxisRotation.

property RotationProbe.MinimumZAxis: Ansys.Core.Units.Quantity | None

Gets the MinimumZAxis.

property RotationProbe.MinimumZAxisRotation: Ansys.Core.Units.Quantity | None

Gets the MinimumZAxisRotation.

property RotationProbe.Orientation: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Orientation. Accepts/Returns None if it is the Solution Coordinate System.

property RotationProbe.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property RotationProbe.RemotePointSelection: Ansys.ACT.Automation.Mechanical.RemotePoint | None

Gets or sets the RemotePointSelection.

property RotationProbe.ResultSelection: Ansys.Mechanical.DataModel.Enums.ProbeDisplayFilter | None

Gets or sets the ResultSelection.

property RotationProbe.SpatialResolution: Ansys.Mechanical.DataModel.Enums.MinimumOrMaximum | None

Gets or sets the SpatialResolution.

property RotationProbe.SpringSelection: Ansys.ACT.Automation.Mechanical.Connections.Spring | None

Gets or sets the SpringSelection.

property RotationProbe.Substep: int | None

Gets the Substep.

property RotationProbe.Summation: Ansys.Mechanical.DataModel.Enums.MomentsAtSummationPointType | None

Gets or sets the Summation.

property RotationProbe.Suppressed: bool | None

Gets or sets the Suppressed.

property RotationProbe.SurfaceSelection: Ansys.ACT.Automation.Mechanical.Surface | None

Gets or sets the MeshConnectionSelection.

property RotationProbe.Time: Ansys.Core.Units.Quantity | None

Gets the Time.

property RotationProbe.Total: Ansys.Core.Units.Quantity | None

Gets the Total.

property RotationProbe.Type: Ansys.Mechanical.DataModel.Enums.ProbeResultType | None

Gets the Type.

property RotationProbe.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property RotationProbe.XAxis: Ansys.Core.Units.Quantity | None

Gets the XAxis.

property RotationProbe.XAxisRotation: Ansys.Core.Units.Quantity | None

Gets the XAxisRotation.

property RotationProbe.YAxis: Ansys.Core.Units.Quantity | None

Gets the YAxis.

property RotationProbe.YAxisRotation: Ansys.Core.Units.Quantity | None

Gets the YAxisRotation.

property RotationProbe.ZAxis: Ansys.Core.Units.Quantity | None

Gets the ZAxis.

property RotationProbe.ZAxisRotation: Ansys.Core.Units.Quantity | None

Gets the ZAxisRotation.

Method detail

RotationProbe.Activate() → None

Activate the current object.

RotationProbe.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

RotationProbe.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

RotationProbe.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

RotationProbe.ClearGeneratedData() → None

Run the ClearGeneratedData action.

RotationProbe.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

RotationProbe.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

RotationProbe.Delete() → None

Run the Delete action.

RotationProbe.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

RotationProbe.DuplicateWithoutResults() → Ansys.ACT.Automation.Mechanical.DataModelObject

Run the DuplicateWithoutResults action.

RotationProbe.EvaluateAllResults() → None

Run the EvaluateAllResults action.

RotationProbe.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None

Run the ExportAnimation action.

RotationProbe.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

RotationProbe.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

RotationProbe.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

RotationProbe.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

RotationProbe.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

RotationProbe.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

RotationProbe.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

RotationProbe.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.

RotationProbe.SnapToMeshNodes() → None

Snap the coordinates of probe result to the mesh nodes.