AutomaticMethod
#
- class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod#
Bases:
object
Defines a AutomaticMethod.
Overview#
Activate the current object. |
|
Creates a new child Comment. |
|
Creates a new child Figure. |
|
Creates a new child Image. |
|
Copies all visible properties from this object to another. |
|
Creates a new parameter for a Property. |
|
Run the Delete action. |
|
Creates a copy of the current DataModelObject. |
|
Generate the Mesh. |
|
Gets the list of children, filtered by type. |
|
Gets the parameter corresponding to the given property. |
|
Run the GroupAllSimilarChildren action. |
|
Run the GroupSimilarObjects action. |
|
Get a property by its API name. |
|
Get a property by its unique name. |
|
Removes the parameter from the parameter set corresponding to the given property. |
|
Run the RenameBasedOnDefinition action. |
Gets the Active. |
|
Gets or sets the AggressiveInflateOption. |
|
Gets or sets the AggressiveTetImprovement. |
|
Gets or sets the Algorithm. |
|
Gets or sets the ApproximativeNumberOfElementsPerPart. |
|
Gets or sets the AutomaticNodeMovement method under PCTet. |
|
Gets the BFCartSubType. |
|
Gets the BFCartTolerance. |
|
Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points). |
|
Gets or sets the CartesianSize in Multizone. |
|
Gets the list of children. |
|
Gets or sets the Clearence. |
|
Gets the list of associated comments. |
|
Gets or sets the ConstrainBoundary. |
|
Gets the ControlMessages. |
|
Gets or sets the CoordinateSystem. |
|
Gets or sets the CornerAngle. |
|
Gets or sets the CurvatureNormalAngle. |
|
Gets the current DataModelObject's category. |
|
Gets or sets the MZDecompositionType in Multizone ( 0 = Standard, 1 = ThinSweep, 2 = CartSweep). |
|
Gets or sets the DefeatureLayerVolume. |
|
Gets or sets the DefeaturingTolerance. |
|
Gets or sets the DefinedBy. |
|
Gets or sets the ElementMidsideNodes. |
|
Gets or sets the ElementOption. |
|
Gets or sets the ElementOrder. |
|
Gets or sets the FaceProximityGapFactor for PCTet. |
|
Gets or sets the FeatureAngle. |
|
Gets or sets the DihedralAngle for AutoNodeMove under PCTet. |
|
Gets the list of associated figures. |
|
Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ). |
|
Gets or sets the FillingDirection. |
|
Gets or sets the FillingFraction. |
|
Gets or sets the FreeFaceMeshType. |
|
Gets or sets the FreeMeshType. |
|
Gets or sets the GenerateLayersUsingFacets. |
|
Gets the list of associated images. |
|
Gets or sets the ImprovementIterations for AutoNodeMove under PCTet. |
|
Gets or sets the InflateRelativeTolerance. |
|
Gets the internal object. For advanced usage only. |
|
Gets or sets the KeyPointsSelection. |
|
Gets or sets the KeyPoints Tolerance in Multizone. |
|
Gets or sets the LateralDefeatureSize. |
|
Gets or sets the LayerHeight. |
|
Gets or sets the LayerStart. |
|
Gets or sets the Location. |
|
Gets or sets the MappedSweptType. |
|
Gets or sets the MatchMeshWherePossible. |
|
Gets or sets the MaximumElementSize. |
|
Gets or sets the MeshBasedDefeaturing. |
|
Gets or sets the MeshFlowControl. |
|
Gets or sets the MeshInCenter. |
|
Gets or sets the MeshType. |
|
Gets or sets the MeshUsingVoxelization. |
|
Gets or sets the Method. |
|
Gets the MinimumEdgeLength. |
|
Gets or sets the MinimumSizeLimit. |
|
Gets or sets the MinimumThickness for PCTet. |
|
Gets or sets the NamedSelection. |
|
Gets or sets the NumberOfCellsAcrossGap. |
|
Gets or sets the NumberOfElementLayers for PCTet. |
|
Gets or sets the OverlappingAngle. |
|
Gets or sets the PartialFill. |
|
Gets or sets the ParticleCoordinateSystem. |
|
Gets or sets the ParticleDiameter. |
|
Gets or sets the PreserveBoundaries. |
|
Gets or sets the ProjectCornersToTop. |
|
Gets or sets the ProjectInConstantZPlane. |
|
Gets or sets the ProjectionFactor. |
|
Gets the list of properties for this object. |
|
Gets or sets the RadialGrowthRate. |
|
Gets or sets the RefineAtThinSection for PCTet. |
|
Gets or sets the RefineSurfaceMesh for PCTet. |
|
Gets or sets the Refinement. |
|
Gets or sets the PrimeRelativeTolerance. |
|
Gets or sets the RepairFacets. |
|
Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet. |
|
Gets or sets the ReuseBlocking. |
|
Gets or sets the ScopingMethod. |
|
Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet. |
|
Gets or sets the SlicerFeatureAngle. |
|
Gets or sets the SliverTriangleHeight. |
|
Gets or sets the SmoothMeshSpacing in Multizone. |
|
Gets or sets the SmoothTransition. |
|
Gets or sets the SolidShellElementForStacker. |
|
Gets or sets the SolidShellElementForStackerGeometrySelection. |
|
Gets or sets the SolidShellElementForStackerNamedSelection. |
|
Gets or sets the SolidShellElementForStackerScopingMethod. |
|
Gets or sets the SourceLocation. |
|
Gets or sets the SourceTargetSelection. |
|
Gets or sets the SpacingOption. |
|
Gets or sets the SplitAngle in Multizone. |
|
Gets or sets the StackerCoordinateSystem. |
|
Gets or sets the StackerFreeFaceMeshType. |
|
Gets or sets the StackerTriangleReduction. |
|
Gets or sets the StackingAxis. |
|
Gets or sets the StackingDefeatureSize. |
|
Gets or sets the StretchFactorX. |
|
Gets or sets the StretchFactorY. |
|
Gets or sets the StretchFactorZ. |
|
Gets or sets the SubsampleRate. |
|
Gets or sets the Suppressed. |
|
Gets or sets the SurfaceMeshMethod. |
|
Gets or sets the SweepBiasType. |
|
Gets or sets the SweepBiasValue. |
|
Gets or sets the SweepESizeType. |
|
Gets or sets the SweepEdges. |
|
Gets or sets the SweepElementSize. |
|
Gets or sets the SweepNumberDivisions. |
|
Gets or sets the SweepSizeBehavior. |
|
Gets or sets the SweepThickness in Multizone. |
|
Gets or sets the TargetLocation. |
|
Gets or sets the TetraGrowthRate. |
|
Gets or sets the TriangleReduction. |
|
Gets or sets the UseSplitAngle in Multizone. |
|
Gets the list of properties that are visible for this object. |
|
Gets or sets the WallThickness. |
|
Gets or sets the WriteICEMCFDFiles. |
Property detail#
- property AutomaticMethod.AggressiveInflateOption: bool | None#
Gets or sets the AggressiveInflateOption.
- property AutomaticMethod.AggressiveTetImprovement: bool | None#
Gets or sets the AggressiveTetImprovement.
- property AutomaticMethod.Algorithm: Ansys.Mechanical.DataModel.Enums.MeshMethodAlgorithm | None#
Gets or sets the Algorithm.
- property AutomaticMethod.ApproximativeNumberOfElementsPerPart: int | None#
Gets or sets the ApproximativeNumberOfElementsPerPart.
- property AutomaticMethod.AutomaticNodeMovement: Ansys.Mechanical.DataModel.Enums.AutomaticNodeMovementMethod | None#
Gets or sets the AutomaticNodeMovement method under PCTet.
- property AutomaticMethod.BFCartTolerance: Ansys.Core.Units.Quantity | None#
Gets the BFCartTolerance.
- property AutomaticMethod.CartSweepSpacingOption: int | None#
Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points).
- property AutomaticMethod.CartesianSize: Ansys.Core.Units.Quantity | None#
Gets or sets the CartesianSize in Multizone.
- property AutomaticMethod.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#
Gets the list of children.
- property AutomaticMethod.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#
Gets the list of associated comments.
- property AutomaticMethod.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the CoordinateSystem.
- property AutomaticMethod.CornerAngle: Ansys.Core.Units.Quantity | None#
Gets or sets the CornerAngle.
- property AutomaticMethod.CurvatureNormalAngle: Ansys.Core.Units.Quantity | None#
Gets or sets the CurvatureNormalAngle.
- property AutomaticMethod.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#
Gets the current DataModelObject's category.
- property AutomaticMethod.DecompositionType: int | None#
Gets or sets the MZDecompositionType in Multizone ( 0 = Standard, 1 = ThinSweep, 2 = CartSweep).
- property AutomaticMethod.DefeaturingTolerance: Ansys.Core.Units.Quantity | None#
Gets or sets the DefeaturingTolerance.
- property AutomaticMethod.DefinedBy: Ansys.Mechanical.DataModel.Enums.PatchIndependentDefineType | None#
Gets or sets the DefinedBy.
- property AutomaticMethod.ElementMidsideNodes: Ansys.Mechanical.DataModel.Enums.ElementMidsideNodesType | None#
Gets or sets the ElementMidsideNodes.
- property AutomaticMethod.ElementOption: Ansys.Mechanical.DataModel.Enums.SweepElementOptionType | None#
Gets or sets the ElementOption.
- property AutomaticMethod.ElementOrder: Ansys.Mechanical.DataModel.Enums.ElementOrder | None#
Gets or sets the ElementOrder.
- property AutomaticMethod.FaceProximityGapFactor: float | None#
Gets or sets the FaceProximityGapFactor for PCTet.
- property AutomaticMethod.FeatureAngle: Ansys.Core.Units.Quantity | None#
Gets or sets the FeatureAngle.
- property AutomaticMethod.FeatureProtectionAngle: Ansys.Core.Units.Quantity | None#
Gets or sets the DihedralAngle for AutoNodeMove under PCTet.
- property AutomaticMethod.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#
Gets the list of associated figures.
- property AutomaticMethod.FilletCollapse: int | None#
Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ).
- property AutomaticMethod.FillingDirection: Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None#
Gets or sets the FillingDirection.
- property AutomaticMethod.GenerateLayersUsingFacets: bool | None#
Gets or sets the GenerateLayersUsingFacets.
- property AutomaticMethod.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#
Gets the list of associated images.
- property AutomaticMethod.ImprovementIterations: int | None#
Gets or sets the ImprovementIterations for AutoNodeMove under PCTet.
- property AutomaticMethod.InflateRelativeTolerance: float | None#
Gets or sets the InflateRelativeTolerance.
- property AutomaticMethod.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlAuto | None#
Gets the internal object. For advanced usage only.
- property AutomaticMethod.KeyPointsSelection: Ansys.Mechanical.DataModel.Enums.AutomaticOrManual | None#
Gets or sets the KeyPointsSelection.
- property AutomaticMethod.KeyPointsTolerance: Ansys.Core.Units.Quantity | None#
Gets or sets the KeyPoints Tolerance in Multizone.
- property AutomaticMethod.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the Location.
- property AutomaticMethod.MatchMeshWherePossible: bool | None#
Gets or sets the MatchMeshWherePossible.
- property AutomaticMethod.MaximumElementSize: Ansys.Core.Units.Quantity | None#
Gets or sets the MaximumElementSize.
- property AutomaticMethod.MeshFlowControl: Ansys.Mechanical.DataModel.Enums.MeshFlowControlMethod | None#
Gets or sets the MeshFlowControl.
- property AutomaticMethod.MeshType: Ansys.Mechanical.DataModel.Enums.MethodMeshType | None#
Gets or sets the MeshType.
- property AutomaticMethod.MeshUsingVoxelization: bool | None#
Gets or sets the MeshUsingVoxelization.
- property AutomaticMethod.Method: Ansys.Mechanical.DataModel.Enums.MethodType | None#
Gets or sets the Method.
- property AutomaticMethod.MinimumEdgeLength: Ansys.Core.Units.Quantity | None#
Gets the MinimumEdgeLength.
- property AutomaticMethod.MinimumSizeLimit: Ansys.Core.Units.Quantity | None#
Gets or sets the MinimumSizeLimit.
- property AutomaticMethod.MinimumThickness: Ansys.Core.Units.Quantity | None#
Gets or sets the MinimumThickness for PCTet.
- property AutomaticMethod.NamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None#
Gets or sets the NamedSelection.
- property AutomaticMethod.NumberOfCellsAcrossGap: int | None#
Gets or sets the NumberOfCellsAcrossGap.
- property AutomaticMethod.NumberOfElementLayers: int | None#
Gets or sets the NumberOfElementLayers for PCTet.
- property AutomaticMethod.OverlappingAngle: Ansys.Core.Units.Quantity | None#
Gets or sets the OverlappingAngle.
- property AutomaticMethod.ParticleCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the ParticleCoordinateSystem.
- property AutomaticMethod.ParticleDiameter: Ansys.Core.Units.Quantity | None#
Gets or sets the ParticleDiameter.
- property AutomaticMethod.ProjectInConstantZPlane: bool | None#
Gets or sets the ProjectInConstantZPlane.
- property AutomaticMethod.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties for this object.
- property AutomaticMethod.RefineAtThinSection: bool | None#
Gets or sets the RefineAtThinSection for PCTet.
- property AutomaticMethod.RefineSurfaceMesh: bool | None#
Gets or sets the RefineSurfaceMesh for PCTet.
- property AutomaticMethod.RestrictNodeMovementsToSurface: bool | None#
Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet.
- property AutomaticMethod.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#
Gets or sets the ScopingMethod.
- property AutomaticMethod.ShowAdvancedImproveOptions: bool | None#
Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet.
- property AutomaticMethod.SmoothMeshSpacing: bool | None#
Gets or sets the SmoothMeshSpacing in Multizone.
- property AutomaticMethod.SolidShellElementForStacker: Ansys.Mechanical.DataModel.Enums.YesNoType | None#
Gets or sets the SolidShellElementForStacker.
- property AutomaticMethod.SolidShellElementForStackerGeometrySelection: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the SolidShellElementForStackerGeometrySelection.
- property AutomaticMethod.SolidShellElementForStackerNamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None#
Gets or sets the SolidShellElementForStackerNamedSelection.
- property AutomaticMethod.SolidShellElementForStackerScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#
Gets or sets the SolidShellElementForStackerScopingMethod.
- property AutomaticMethod.SourceLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the SourceLocation.
- property AutomaticMethod.SplitAngle: Ansys.Core.Units.Quantity | None#
Gets or sets the SplitAngle in Multizone.
- property AutomaticMethod.StackerCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#
Gets or sets the StackerCoordinateSystem.
- property AutomaticMethod.StackerFreeFaceMeshType: Ansys.Mechanical.DataModel.Enums.StackerMethodMeshType | None#
Gets or sets the StackerFreeFaceMeshType.
- property AutomaticMethod.StackerTriangleReduction: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None#
Gets or sets the StackerTriangleReduction.
- property AutomaticMethod.StackingAxis: Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None#
Gets or sets the StackingAxis.
- property AutomaticMethod.StackingDefeatureSize: float | None#
Gets or sets the StackingDefeatureSize.
- property AutomaticMethod.SweepBiasType: Ansys.Mechanical.DataModel.Enums.BiasType | None#
Gets or sets the SweepBiasType.
- property AutomaticMethod.SweepEdges: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the SweepEdges.
- property AutomaticMethod.SweepElementSize: Ansys.Core.Units.Quantity | None#
Gets or sets the SweepElementSize.
- property AutomaticMethod.SweepThickness: Ansys.Core.Units.Quantity | None#
Gets or sets the SweepThickness in Multizone.
- property AutomaticMethod.TargetLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#
Gets or sets the TargetLocation.
- property AutomaticMethod.TriangleReduction: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None#
Gets or sets the TriangleReduction.
- property AutomaticMethod.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#
Gets the list of properties that are visible for this object.
Method detail#
- AutomaticMethod.AddComment() Ansys.ACT.Automation.Mechanical.Comment #
Creates a new child Comment.
- AutomaticMethod.AddFigure() Ansys.ACT.Automation.Mechanical.Figure #
Creates a new child Figure.
- AutomaticMethod.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image #
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
- AutomaticMethod.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None #
Copies all visible properties from this object to another.
- AutomaticMethod.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Creates a new parameter for a Property.
- AutomaticMethod.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject #
Creates a copy of the current DataModelObject.
- AutomaticMethod.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType] #
Gets the list of children, filtered by type.
- AutomaticMethod.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter #
Gets the parameter corresponding to the given property.
- AutomaticMethod.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder #
Run the GroupSimilarObjects action.
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
- AutomaticMethod.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property #
Get a property by its unique name.