EXDAnalysisSettings#

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.AnalysisSettings.EXDAnalysisSettings#

Bases: object

Defines Analysis Settings for Explicit Dynamics System. Note: Cycles in the UI are referred to as TimeSteps in API

Overview#

Activate

Activate the current object.

AddComment

Creates a new child Comment.

AddFigure

Creates a new child Figure.

AddImage

Creates a new child Image.

CopyTo

Copies all visible properties from this object to another.

CreateParameter

Creates a new parameter for a Property.

DeleteAllRestartPoints

DeleteAllRestartPoints method.

Duplicate

Creates a copy of the current DataModelObject.

GetAutomaticMassScalingType

Gets the AutomaticMassScalingType for a load step.

GetChildren

Gets the list of children, filtered by type.

GetLoadStepType

Gets the LoadStepType for a step.

GetMassScalingMinTimeStep

Gets the MassScalingMinTimeStep for a load step.

GetParameter

Gets the parameter corresponding to the given property.

GetSaveProbeDataOnTime

Gets the Time increment for Save ProbeData On for a load step.

GetSaveProbeDataOnTimeSteps

Gets the Cycle increment for Save ProbeData On for a load step.

GetSaveProbeDataOnType

Gets the Save ProbeData Type for a load step.

GetSaveRestartsOnPoints

Gets the Points increment for Save Restarts On Points for a load step.

GetSaveRestartsOnTime

Gets the Time increment for Save Restarts On for a load step.

GetSaveRestartsOnTimeSteps

Gets the Cycle increment for Save Restarts On for a load step.

GetSaveRestartsOnType

Gets the Save Restarts Type for a load step.

GetSaveResultsOnPoints

Gets the Points increment for Save Results On for a load step.

GetSaveResultsOnTime

Gets the Time increment for Save Results On for a load step.

GetSaveResultsOnTimeSteps

Gets the Cycle increment for Save Results On for a load step.

GetSaveResultsOnType

Gets the Save Results Type for a load step.

GetStaticDamping

Gets the StaticDamping.

GetStepEndTime

Gets the Step End Time at a given solution step.

GroupAllSimilarChildren

Run the GroupAllSimilarChildren action.

GroupSimilarObjects

Run the GroupSimilarObjects action.

PropertyByAPIName

Get a property by its API name.

PropertyByName

Get a property by its unique name.

RemoveParameter

Removes the parameter from the parameter set corresponding to the given property.

SetAutomaticMassScalingType

Sets the AutomaticMassScalingType for a load step.

SetLoadStepType

Sets the LoadStepType for a step.

SetMassScalingMinTimeStep

Sets the MassScalingMinTimeStep for a load step.

SetSaveProbeDataOnTime

Set the Time increment for Save ProbeData On for a load step.

SetSaveProbeDataOnTimeSteps

Set the Cycle increment for Save ProbeData On for a load step.

SetSaveProbeDataOnType

Sets the Save ProbeData Type for a load step.

SetSaveRestartsOnPoints

Set the Points increment for Save Restarts On for a load step.

SetSaveRestartsOnTime

Set the Time increment for Save Restarts On for a load step.

SetSaveRestartsOnTimeSteps

Set the Cycle increment for Save Restarts On for a load step.

SetSaveRestartsOnType

Sets the Save Restarts Type for a load step.

SetSaveResultsOnPoints

Set the Points increment for Save Results On for a load step.

SetSaveResultsOnTime

Set the Time increment for Save Results On for a load step.

SetSaveResultsOnTimeSteps

Sets the Cycle increment for Save Results On for a load step.

SetSaveResultsOnType

Sets the Save Results Type for a load step.

SetStaticDamping

Sets the StaticDamping.

SetStepEndTime

Sets the Step End Time for a given solution step.

getADRConvergenceMethod

Gets the Covergence Method for ADR loadstep.

getADRConvergenceTolerance

Gets the Covergence Tolerance for ADR loadstep.

getADRMaximumIterations

Gets the Maximum Iterations for ADR loadstep.

setADRConvergenceMethod

Sets the Covergence Method for ADR loadstep.

setADRConvergenceTolerance

Sets the Covergence Tolerance for ADR loadstep.

setADRMaximumIterations

Sets the Maximum Iterations for ADR loadstep.

ArtificialViscosityForShellsType

Gets or sets the ArtificialViscosityForShellsType.

AutomaticMassScalingType

Gets or sets the AutomaticMassScaling.

BeamSolutionType

Gets or sets the BeamSolutionType.

BeamTimeStepSafetyFactor

Gets or sets the BeamTimeStepSafetyFactor.

CharZoneDimensionType

Gets or sets the CharZoneDimensionType.

Children

Gets the list of children.

Comments

Gets the list of associated comments.

CurrentStepNumber

Gets or sets the CurrentStepNumber.

DataModelObjectCategory

Gets the current DataModelObject's category.

DensityUpdateType

Gets or sets the DensityUpdateType.

DetonationBurnType

Gets or sets the DetonationBurnType.

ErosionGeomStrainLimit

Gets or sets the ErosionGeomStrainLimit

ErosionMinElemTimestep

Gets or sets the ErosionMinElemTimestep

ErosionOnGeomStrainType

Gets or sets the ErosionOnGeomStrainType.

ErosionOnMaterialFailureType

Gets or sets the ErosionOnMaterialFailureType

ErosionOnMinElemTimestepType

Gets or sets the ErosionOnMinElemTimestepType

ErosionRetainIntertiaType

Gets or sets the ErosionRetainIntertiaType

EulerBoundLowerX

Gets or sets the EulerBoundLowerX.

EulerBoundLowerY

Gets or sets the EulerBoundLowerY.

EulerBoundLowerZ

Gets or sets the EulerBoundLowerZ.

EulerBoundUpperX

Gets or sets the EulerBoundUpperX.

EulerBoundUpperY

Gets or sets the EulerBoundUpperY.

EulerBoundUpperZ

Gets or sets the EulerBoundUpperZ.

EulerCellSize

Gets or sets the EulerCellSize.

EulerDisplayBox

Gets or sets the EulerDisplayBox.

EulerDomScopeDefType

Gets or sets the EulerDomScopeDefType.

EulerDomainType

Gets or sets the EulerDomainType.

EulerGradeIncrement

Gets or sets the EulerGradeIncrement.

EulerGradeNumberOfTimes

Gets or sets the EulerGradeNumberOfTimes.

EulerGradedDefinition

Gets or sets the EulerGradedDefinition.

EulerPropertyDisplayBox

Gets or sets the EulerPropertyDisplayBox.

EulerPropertyXmin

Gets or sets the EulerPropertyXmin.

EulerPropertyXres

Gets or sets the EulerPropertyXres.

EulerPropertyXsize

Gets or sets the EulerPropertyXsize.

EulerPropertyYmin

Gets or sets the EulerPropertyYmin.

EulerPropertyYres

Gets or sets the EulerPropertyYres.

EulerPropertyYsize

Gets or sets the EulerPropertyYsize.

EulerPropertyZmin

Gets or sets the EulerPropertyZmin.

EulerPropertyZres

Gets or sets the EulerPropertyZres.

EulerPropertyZsize

Gets or sets the EulerPropertyZsize.

EulerResolutionDefType

Gets or sets the EulerResolutionDefType.

EulerSizeDefType

Gets or sets the EulerSizeDefType.

EulerTotalCells

Gets or sets the EulerTotalCells.

EulerTrackType

Gets the EulerTrackType.

EulerXDim

Gets or sets the EulerXDim.

EulerXOrigin

Gets or sets the EulerXOrigin.

EulerXScaleFactor

Gets or sets the EulerXScaleFactor.

EulerXZones

Gets or sets the EulerXZones.

EulerYDim

Gets or sets the EulerYDim.

EulerYOrigin

Gets or sets the EulerYOrigin.

EulerYScaleFactor

Gets or sets the EulerYScaleFactor.

EulerYZones

Gets or sets the EulerYZones.

EulerZDim

Gets or sets the EulerZDim.

EulerZOrigin

Gets or sets the EulerZOrigin.

EulerZScaleFactor

Gets or sets the EulerZScaleFactor.

EulerZZones

Gets or sets the EulerZZones.

Figures

Gets the list of associated figures.

Graph

Graph property.

HexIntegrationType

Gets or sets the HexIntegrationType.

HourglassDampingType

Gets or sets the HourglassDampingType.

Images

Gets the list of associated images.

InitialTimeStep

Gets or sets the InitialTimeStep.

InternalObject

Gets the Internal Object. For advanced usage only.

LinearArtificialViscosity

Gets or sets the LinearArtificialViscosity.

LinearViscosityExpansionType

Gets or sets the LinearViscosityExpansionType.

LinearViscositySPH

Gets or sets the Linear Artificial Viscosity for SPH.

MassScalingMaxElem

Gets or sets the MassScalingMaxElem.

MassScalingMaxPart

Gets or sets the MassScalingMaxPart.

MassScalingMinTimeStep

Gets or sets the MassScalingMinTimeStep.

MassScalingUpdateFreq

Gets or sets the MassScalingUpdateFreq.

MaximumEnergyError

Gets or sets the MaximumEnergyError.

MaximumTimeStep

Gets or sets the MaximumTimeStep.

MaximumTimeSteps

Gets or sets the MaximumNumberofCycles.

MaximumVelocity

Gets or sets the MaximumVelocity.

MinimumStrainCutOff

Gets or sets the MinimumStrainCutOff.

MinimumTimeStep

Gets or sets the MinimumTimeStep.

MinimumVelocity

Gets or sets the MinimumVelocity.

NumberOfSteps

Gets or sets the NumberOfSteps.

OutputContactForcesOnPoints

Gets or Sets the Points increment for OutputContactForcesOnPoints.

OutputContactForcesOnTime

Gets or Sets the Time increment for OutputContactForcesOnTime.

OutputContactForcesOnTimeSteps

Gets or Sets the Cycle increment for OutputContactForcesOnTimeSteps.

OutputContactForcesOnType

Gets or Sets OutputContactForces Increment Type.

OutputRemapFile

Gets or Sets the Output Remap File Type.

PreferenceType

Gets or sets the PreferenceType

Properties

Gets the list of properties for this object.

PusoCoefficient

Gets or sets the PusoCoefficient.

QuadraticArtificialViscosity

Gets or sets the QuadraticArtificialViscosity.

QuadratricViscositySPH

Gets or sets the Quadratic Artificial Viscosity for SPH.

RadiusCutoff

Gets or sets the RadiusCutoff.

ReferenceEnergyTimeStep

Gets or sets the ReferenceEnergyCycle.

ResumeFromTimeStep

Gets or sets the ResumeFromCycle.

SPHMaxDensityFactor

Gets or sets the Maximum Density Factor for SPH.

SPHMinDensityFactor

Gets or sets the Minimum Density Factor for SPH.

SPHNodeDensityCutoffOption

Gets or sets the SPHNodeDensityCutoffOption.

SavePrintSummaryOnTime

Gets or Sets the Time increment for SavePrintSummaryOnTime.

SavePrintSummaryOnTimeSteps

Gets or Sets Cycle increment for SavePrintSummaryOnTimeSteps.

SavePrintSummaryOnType

Gets or Sets SavePrintSummaryOnType.

SaveUserEditOnTime

Gets or Sets Time increment for SaveUserEditOnTime.

SaveUserEditOnTimeSteps

Gets or Sets Cycle increment for SaveUserEditOnTimeSteps.

SaveUserEditOnType

Gets or Sets SaveUserEditOnType.

ScratchSolverFilesDirectory

Gets the ScratchSolverFilesDirectory.

ShellInertiaUpdateType

Gets or sets the ShellInertiaUpdateType.

ShellShearCorrectionFactor

Gets or sets the ShellShearCorrectionFactor.

ShellSublayers

Gets or sets the ShellSublayers.

ShellThicknessUpdateType

Gets or sets the ShellThicknessUpdateType.

ShellWarpCorrection

Gets or sets the ShellWarpCorrection.

SolveUnits

Gets or sets the SolveUnits.

SolverFilesDirectory

Gets the SolverFilesDirectory.

SolverPrecisionType

Gets or sets the SolverPrecisionType.

SphMinTimeStep

Gets or sets the Minimum Timestep for SPH.

StepawareMassScalingType

Gets or Sets the Step aware Mass Scaling Controls.

StepawareOutputControlsType

Gets or Sets the Step aware Output Controls.

StiffnessCoefficient

Gets or sets the StiffnessCoefficient.

TetPressureIntegrationType

Gets or sets the TetIntegrationType.

TimeStepSafetyFactor

Gets or sets the TimeStepSafetyFactor.

ViscousCoefficient

Gets or sets the ViscousCoefficient.

ViscousCoefficientFB

Gets or sets the ViscousCoefficientFB.

VisibleProperties

Gets the list of properties that are visible for this object.

Property detail#

property EXDAnalysisSettings.ArtificialViscosityForShellsType: bool | None#

Gets or sets the ArtificialViscosityForShellsType.

property EXDAnalysisSettings.AutomaticMassScalingType: bool | None#

Gets or sets the AutomaticMassScaling.

property EXDAnalysisSettings.BeamSolutionType: Ansys.Mechanical.DataModel.Enums.EXDBeamSolutionType | None#

Gets or sets the BeamSolutionType.

property EXDAnalysisSettings.BeamTimeStepSafetyFactor: float | None#

Gets or sets the BeamTimeStepSafetyFactor.

property EXDAnalysisSettings.CharZoneDimensionType: Ansys.Mechanical.DataModel.Enums.EXDCharZoneDimensionType | None#

Gets or sets the CharZoneDimensionType.

property EXDAnalysisSettings.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#

Gets the list of children.

property EXDAnalysisSettings.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#

Gets the list of associated comments.

property EXDAnalysisSettings.CurrentStepNumber: int | None#

Gets or sets the CurrentStepNumber.

property EXDAnalysisSettings.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#

Gets the current DataModelObject's category.

property EXDAnalysisSettings.DensityUpdateType: Ansys.Mechanical.DataModel.Enums.EXDDensityUpdateType | None#

Gets or sets the DensityUpdateType.

property EXDAnalysisSettings.DetonationBurnType: Ansys.Mechanical.DataModel.Enums.EXDDetonationBurnType | None#

Gets or sets the DetonationBurnType.

property EXDAnalysisSettings.ErosionGeomStrainLimit: float | None#

Gets or sets the ErosionGeomStrainLimit

property EXDAnalysisSettings.ErosionMinElemTimestep: Ansys.Core.Units.Quantity | None#

Gets or sets the ErosionMinElemTimestep

property EXDAnalysisSettings.ErosionOnGeomStrainType: bool | None#

Gets or sets the ErosionOnGeomStrainType.

property EXDAnalysisSettings.ErosionOnMaterialFailureType: bool | None#

Gets or sets the ErosionOnMaterialFailureType

property EXDAnalysisSettings.ErosionOnMinElemTimestepType: bool | None#

Gets or sets the ErosionOnMinElemTimestepType

property EXDAnalysisSettings.ErosionRetainIntertiaType: bool | None#

Gets or sets the ErosionRetainIntertiaType

property EXDAnalysisSettings.EulerBoundLowerX: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None#

Gets or sets the EulerBoundLowerX.

property EXDAnalysisSettings.EulerBoundLowerY: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None#

Gets or sets the EulerBoundLowerY.

property EXDAnalysisSettings.EulerBoundLowerZ: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None#

Gets or sets the EulerBoundLowerZ.

property EXDAnalysisSettings.EulerBoundUpperX: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None#

Gets or sets the EulerBoundUpperX.

property EXDAnalysisSettings.EulerBoundUpperY: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None#

Gets or sets the EulerBoundUpperY.

property EXDAnalysisSettings.EulerBoundUpperZ: Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType | None#

Gets or sets the EulerBoundUpperZ.

property EXDAnalysisSettings.EulerCellSize: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerCellSize.

property EXDAnalysisSettings.EulerDisplayBox: bool | None#

Gets or sets the EulerDisplayBox.

property EXDAnalysisSettings.EulerDomScopeDefType: Ansys.Mechanical.DataModel.Enums.EXDEulerDomScopeDefType | None#

Gets or sets the EulerDomScopeDefType.

property EXDAnalysisSettings.EulerDomainType: Ansys.Mechanical.DataModel.Enums.EXDEulerDomainType | None#

Gets or sets the EulerDomainType.

property EXDAnalysisSettings.EulerGradeIncrement: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerGradeIncrement.

property EXDAnalysisSettings.EulerGradeNumberOfTimes: int | None#

Gets or sets the EulerGradeNumberOfTimes.

property EXDAnalysisSettings.EulerGradedDefinition: Ansys.Mechanical.DataModel.Enums.EXDEulerGradedDefinition | None#

Gets or sets the EulerGradedDefinition.

property EXDAnalysisSettings.EulerPropertyDisplayBox: bool | None#

Gets or sets the EulerPropertyDisplayBox.

property EXDAnalysisSettings.EulerPropertyXmin: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerPropertyXmin.

property EXDAnalysisSettings.EulerPropertyXres: int | None#

Gets or sets the EulerPropertyXres.

property EXDAnalysisSettings.EulerPropertyXsize: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerPropertyXsize.

property EXDAnalysisSettings.EulerPropertyYmin: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerPropertyYmin.

property EXDAnalysisSettings.EulerPropertyYres: int | None#

Gets or sets the EulerPropertyYres.

property EXDAnalysisSettings.EulerPropertyYsize: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerPropertyYsize.

property EXDAnalysisSettings.EulerPropertyZmin: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerPropertyZmin.

property EXDAnalysisSettings.EulerPropertyZres: int | None#

Gets or sets the EulerPropertyZres.

property EXDAnalysisSettings.EulerPropertyZsize: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerPropertyZsize.

property EXDAnalysisSettings.EulerResolutionDefType: Ansys.Mechanical.DataModel.Enums.EXDEulerResolutionDefType | None#

Gets or sets the EulerResolutionDefType.

property EXDAnalysisSettings.EulerSizeDefType: Ansys.Mechanical.DataModel.Enums.EXDEulerSizeDefType | None#

Gets or sets the EulerSizeDefType.

property EXDAnalysisSettings.EulerTotalCells: int | None#

Gets or sets the EulerTotalCells.

property EXDAnalysisSettings.EulerTrackType: Ansys.Mechanical.DataModel.Enums.EXDEulerTrackType | None#

Gets the EulerTrackType.

property EXDAnalysisSettings.EulerXDim: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerXDim.

property EXDAnalysisSettings.EulerXOrigin: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerXOrigin.

property EXDAnalysisSettings.EulerXScaleFactor: float | None#

Gets or sets the EulerXScaleFactor.

property EXDAnalysisSettings.EulerXZones: int | None#

Gets or sets the EulerXZones.

property EXDAnalysisSettings.EulerYDim: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerYDim.

property EXDAnalysisSettings.EulerYOrigin: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerYOrigin.

property EXDAnalysisSettings.EulerYScaleFactor: float | None#

Gets or sets the EulerYScaleFactor.

property EXDAnalysisSettings.EulerYZones: int | None#

Gets or sets the EulerYZones.

property EXDAnalysisSettings.EulerZDim: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerZDim.

property EXDAnalysisSettings.EulerZOrigin: Ansys.Core.Units.Quantity | None#

Gets or sets the EulerZOrigin.

property EXDAnalysisSettings.EulerZScaleFactor: float | None#

Gets or sets the EulerZScaleFactor.

property EXDAnalysisSettings.EulerZZones: int | None#

Gets or sets the EulerZZones.

property EXDAnalysisSettings.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#

Gets the list of associated figures.

property EXDAnalysisSettings.Graph: Ansys.Mechanical.Graphics.AnalysisSettingsGraph | None#

Graph property.

property EXDAnalysisSettings.HexIntegrationType: Ansys.Mechanical.DataModel.Enums.EXDHexIntegrationType | None#

Gets or sets the HexIntegrationType.

property EXDAnalysisSettings.HourglassDampingType: Ansys.Mechanical.DataModel.Enums.EXDHourglassDampingType | None#

Gets or sets the HourglassDampingType.

property EXDAnalysisSettings.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#

Gets the list of associated images.

property EXDAnalysisSettings.InitialTimeStep: Ansys.Core.Units.Quantity | None#

Gets or sets the InitialTimeStep.

property EXDAnalysisSettings.InternalObject: Any | None#

Gets the Internal Object. For advanced usage only.

property EXDAnalysisSettings.LinearArtificialViscosity: float | None#

Gets or sets the LinearArtificialViscosity.

property EXDAnalysisSettings.LinearViscosityExpansionType: bool | None#

Gets or sets the LinearViscosityExpansionType.

property EXDAnalysisSettings.LinearViscositySPH: float | None#

Gets or sets the Linear Artificial Viscosity for SPH.

property EXDAnalysisSettings.MassScalingMaxElem: float | None#

Gets or sets the MassScalingMaxElem.

property EXDAnalysisSettings.MassScalingMaxPart: float | None#

Gets or sets the MassScalingMaxPart.

property EXDAnalysisSettings.MassScalingMinTimeStep: Ansys.Core.Units.Quantity | None#

Gets or sets the MassScalingMinTimeStep.

property EXDAnalysisSettings.MassScalingUpdateFreq: int | None#

Gets or sets the MassScalingUpdateFreq.

property EXDAnalysisSettings.MaximumEnergyError: float | None#

Gets or sets the MaximumEnergyError.

property EXDAnalysisSettings.MaximumTimeStep: Ansys.Core.Units.Quantity | None#

Gets or sets the MaximumTimeStep.

property EXDAnalysisSettings.MaximumTimeSteps: int | None#

Gets or sets the MaximumNumberofCycles.

property EXDAnalysisSettings.MaximumVelocity: Ansys.Core.Units.Quantity | None#

Gets or sets the MaximumVelocity.

property EXDAnalysisSettings.MinimumStrainCutOff: float | None#

Gets or sets the MinimumStrainCutOff.

property EXDAnalysisSettings.MinimumTimeStep: Ansys.Core.Units.Quantity | None#

Gets or sets the MinimumTimeStep.

property EXDAnalysisSettings.MinimumVelocity: Ansys.Core.Units.Quantity | None#

Gets or sets the MinimumVelocity.

property EXDAnalysisSettings.NumberOfSteps: int | None#

Gets or sets the NumberOfSteps.

property EXDAnalysisSettings.OutputContactForcesOnPoints: int | None#

Gets or Sets the Points increment for OutputContactForcesOnPoints.

property EXDAnalysisSettings.OutputContactForcesOnTime: Ansys.Core.Units.Quantity | None#

Gets or Sets the Time increment for OutputContactForcesOnTime.

property EXDAnalysisSettings.OutputContactForcesOnTimeSteps: int | None#

Gets or Sets the Cycle increment for OutputContactForcesOnTimeSteps.

property EXDAnalysisSettings.OutputContactForcesOnType: Ansys.Mechanical.DataModel.Enums.EXDOutputContactForcesOnType | None#

Gets or Sets OutputContactForces Increment Type.

property EXDAnalysisSettings.OutputRemapFile: Ansys.Mechanical.DataModel.Enums.EXDOutputRemapFileOnType | None#

Gets or Sets the Output Remap File Type.

property EXDAnalysisSettings.PreferenceType: Ansys.Mechanical.DataModel.Enums.EXDPreferenceType | None#

Gets or sets the PreferenceType

property EXDAnalysisSettings.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties for this object.

property EXDAnalysisSettings.PusoCoefficient: float | None#

Gets or sets the PusoCoefficient.

property EXDAnalysisSettings.QuadraticArtificialViscosity: float | None#

Gets or sets the QuadraticArtificialViscosity.

property EXDAnalysisSettings.QuadratricViscositySPH: float | None#

Gets or sets the Quadratic Artificial Viscosity for SPH.

property EXDAnalysisSettings.RadiusCutoff: float | None#

Gets or sets the RadiusCutoff.

property EXDAnalysisSettings.ReferenceEnergyTimeStep: int | None#

Gets or sets the ReferenceEnergyCycle.

property EXDAnalysisSettings.ResumeFromTimeStep: int | None#

Gets or sets the ResumeFromCycle.

property EXDAnalysisSettings.SPHMaxDensityFactor: float | None#

Gets or sets the Maximum Density Factor for SPH.

property EXDAnalysisSettings.SPHMinDensityFactor: float | None#

Gets or sets the Minimum Density Factor for SPH.

property EXDAnalysisSettings.SPHNodeDensityCutoffOption: Ansys.Mechanical.DataModel.Enums.EXDSPHNodeDensityCutoffOption | None#

Gets or sets the SPHNodeDensityCutoffOption.

property EXDAnalysisSettings.SavePrintSummaryOnTime: Ansys.Core.Units.Quantity | None#

Gets or Sets the Time increment for SavePrintSummaryOnTime.

property EXDAnalysisSettings.SavePrintSummaryOnTimeSteps: int | None#

Gets or Sets Cycle increment for SavePrintSummaryOnTimeSteps.

property EXDAnalysisSettings.SavePrintSummaryOnType: Ansys.Mechanical.DataModel.Enums.EXDSavePrintSummaryOnType | None#

Gets or Sets SavePrintSummaryOnType.

property EXDAnalysisSettings.SaveUserEditOnTime: Ansys.Core.Units.Quantity | None#

Gets or Sets Time increment for SaveUserEditOnTime.

property EXDAnalysisSettings.SaveUserEditOnTimeSteps: int | None#

Gets or Sets Cycle increment for SaveUserEditOnTimeSteps.

property EXDAnalysisSettings.SaveUserEditOnType: Ansys.Mechanical.DataModel.Enums.EXDSaveUserEditOnType | None#

Gets or Sets SaveUserEditOnType.

property EXDAnalysisSettings.ScratchSolverFilesDirectory: str | None#

Gets the ScratchSolverFilesDirectory.

property EXDAnalysisSettings.ShellInertiaUpdateType: Ansys.Mechanical.DataModel.Enums.EXDShellInertiaUpdateType | None#

Gets or sets the ShellInertiaUpdateType.

property EXDAnalysisSettings.ShellShearCorrectionFactor: float | None#

Gets or sets the ShellShearCorrectionFactor.

property EXDAnalysisSettings.ShellSublayers: int | None#

Gets or sets the ShellSublayers.

property EXDAnalysisSettings.ShellThicknessUpdateType: Ansys.Mechanical.DataModel.Enums.EXDShellThicknessUpdateType | None#

Gets or sets the ShellThicknessUpdateType.

property EXDAnalysisSettings.ShellWarpCorrection: bool | None#

Gets or sets the ShellWarpCorrection.

property EXDAnalysisSettings.SolveUnits: Ansys.Mechanical.DataModel.Enums.EXDSolveUnitsType | None#

Gets or sets the SolveUnits.

property EXDAnalysisSettings.SolverFilesDirectory: str | None#

Gets the SolverFilesDirectory.

property EXDAnalysisSettings.SolverPrecisionType: Ansys.Mechanical.DataModel.Enums.EXDSolverPrecisionType | None#

Gets or sets the SolverPrecisionType.

property EXDAnalysisSettings.SphMinTimeStep: Ansys.Core.Units.Quantity | None#

Gets or sets the Minimum Timestep for SPH.

property EXDAnalysisSettings.StepawareMassScalingType: bool | None#

Gets or Sets the Step aware Mass Scaling Controls.

property EXDAnalysisSettings.StepawareOutputControlsType: bool | None#

Gets or Sets the Step aware Output Controls.

property EXDAnalysisSettings.StiffnessCoefficient: float | None#

Gets or sets the StiffnessCoefficient.

property EXDAnalysisSettings.TetPressureIntegrationType: Ansys.Mechanical.DataModel.Enums.EXDTetPressureIntegrationType | None#

Gets or sets the TetIntegrationType.

property EXDAnalysisSettings.TimeStepSafetyFactor: float | None#

Gets or sets the TimeStepSafetyFactor.

property EXDAnalysisSettings.ViscousCoefficient: float | None#

Gets or sets the ViscousCoefficient.

property EXDAnalysisSettings.ViscousCoefficientFB: float | None#

Gets or sets the ViscousCoefficientFB.

property EXDAnalysisSettings.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#

Gets the list of properties that are visible for this object.

Method detail#

EXDAnalysisSettings.Activate() None#

Activate the current object.

EXDAnalysisSettings.AddComment() Ansys.ACT.Automation.Mechanical.Comment#

Creates a new child Comment.

EXDAnalysisSettings.AddFigure() Ansys.ACT.Automation.Mechanical.Figure#

Creates a new child Figure.

EXDAnalysisSettings.AddImage(filePath: str) Ansys.ACT.Automation.Mechanical.Image#
Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.
EXDAnalysisSettings.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) None#

Copies all visible properties from this object to another.

EXDAnalysisSettings.CreateParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Creates a new parameter for a Property.

EXDAnalysisSettings.DeleteAllRestartPoints() None#

DeleteAllRestartPoints method.

EXDAnalysisSettings.Duplicate() Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#

Creates a copy of the current DataModelObject.

EXDAnalysisSettings.GetAutomaticMassScalingType(stepNumber: int) bool#

Gets the AutomaticMassScalingType for a load step.

EXDAnalysisSettings.GetChildren(recurses: bool, children: List[ChildrenType]) List[ChildrenType]#

Gets the list of children, filtered by type.

EXDAnalysisSettings.GetLoadStepType(stepNumber: int) Ansys.Mechanical.DataModel.Enums.EXDLoadStepType#

Gets the LoadStepType for a step.

EXDAnalysisSettings.GetMassScalingMinTimeStep(stepNumber: int) Ansys.Core.Units.Quantity#

Gets the MassScalingMinTimeStep for a load step.

EXDAnalysisSettings.GetParameter(propName: str) Ansys.ACT.Interfaces.Mechanical.IParameter#

Gets the parameter corresponding to the given property.

EXDAnalysisSettings.GetSaveProbeDataOnTime(stepNumber: int) Ansys.Core.Units.Quantity#

Gets the Time increment for Save ProbeData On for a load step.

EXDAnalysisSettings.GetSaveProbeDataOnTimeSteps(stepNumber: int) int#

Gets the Cycle increment for Save ProbeData On for a load step.

EXDAnalysisSettings.GetSaveProbeDataOnType(stepNumber: int) Ansys.Mechanical.DataModel.Enums.EXDSaveProbeDataOnType#

Gets the Save ProbeData Type for a load step.

EXDAnalysisSettings.GetSaveRestartsOnPoints(stepNumber: int) int#

Gets the Points increment for Save Restarts On Points for a load step.

EXDAnalysisSettings.GetSaveRestartsOnTime(stepNumber: int) Ansys.Core.Units.Quantity#

Gets the Time increment for Save Restarts On for a load step.

EXDAnalysisSettings.GetSaveRestartsOnTimeSteps(stepNumber: int) int#

Gets the Cycle increment for Save Restarts On for a load step.

EXDAnalysisSettings.GetSaveRestartsOnType(stepNumber: int) Ansys.Mechanical.DataModel.Enums.EXDSaveRestartsOnType#

Gets the Save Restarts Type for a load step.

EXDAnalysisSettings.GetSaveResultsOnPoints(stepNumber: int) int#

Gets the Points increment for Save Results On for a load step.

EXDAnalysisSettings.GetSaveResultsOnTime(stepNumber: int) Ansys.Core.Units.Quantity#

Gets the Time increment for Save Results On for a load step.

EXDAnalysisSettings.GetSaveResultsOnTimeSteps(stepNumber: int) int#

Gets the Cycle increment for Save Results On for a load step.

EXDAnalysisSettings.GetSaveResultsOnType(stepNumber: int) Ansys.Mechanical.DataModel.Enums.EXDSaveResultsOnType#

Gets the Save Results Type for a load step.

EXDAnalysisSettings.GetStaticDamping(stepNumber: int) Any#

Gets the StaticDamping.

EXDAnalysisSettings.GetStepEndTime(stepNumber: int) Ansys.Core.Units.Quantity#

Gets the Step End Time at a given solution step.

EXDAnalysisSettings.GroupAllSimilarChildren() None#

Run the GroupAllSimilarChildren action.

EXDAnalysisSettings.GroupSimilarObjects() Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#

Run the GroupSimilarObjects action.

EXDAnalysisSettings.PropertyByAPIName(name: str) Ansys.ACT.Automation.Mechanical.Property#
Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.
EXDAnalysisSettings.PropertyByName(name: str) Ansys.ACT.Automation.Mechanical.Property#

Get a property by its unique name.

EXDAnalysisSettings.RemoveParameter(propName: str) None#

Removes the parameter from the parameter set corresponding to the given property.

EXDAnalysisSettings.SetAutomaticMassScalingType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDAutomaticMassScalingType) None#

Sets the AutomaticMassScalingType for a load step.

EXDAnalysisSettings.SetLoadStepType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDLoadStepType) None#

Sets the LoadStepType for a step.

EXDAnalysisSettings.SetMassScalingMinTimeStep(stepNumber: int, value: Ansys.Core.Units.Quantity) None#

Sets the MassScalingMinTimeStep for a load step.

EXDAnalysisSettings.SetSaveProbeDataOnTime(stepNumber: int, value: Ansys.Core.Units.Quantity) None#

Set the Time increment for Save ProbeData On for a load step.

EXDAnalysisSettings.SetSaveProbeDataOnTimeSteps(stepNumber: int, value: int) None#

Set the Cycle increment for Save ProbeData On for a load step.

EXDAnalysisSettings.SetSaveProbeDataOnType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDSaveProbeDataOnType) None#

Sets the Save ProbeData Type for a load step.

EXDAnalysisSettings.SetSaveRestartsOnPoints(stepNumber: int, value: int) None#

Set the Points increment for Save Restarts On for a load step.

EXDAnalysisSettings.SetSaveRestartsOnTime(stepNumber: int, value: Ansys.Core.Units.Quantity) None#

Set the Time increment for Save Restarts On for a load step.

EXDAnalysisSettings.SetSaveRestartsOnTimeSteps(stepNumber: int, value: int) None#

Set the Cycle increment for Save Restarts On for a load step.

EXDAnalysisSettings.SetSaveRestartsOnType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDSaveRestartsOnType) None#

Sets the Save Restarts Type for a load step.

EXDAnalysisSettings.SetSaveResultsOnPoints(stepNumber: int, value: int) None#

Set the Points increment for Save Results On for a load step.

EXDAnalysisSettings.SetSaveResultsOnTime(stepNumber: int, value: Ansys.Core.Units.Quantity) None#

Set the Time increment for Save Results On for a load step.

EXDAnalysisSettings.SetSaveResultsOnTimeSteps(stepNumber: int, value: int) None#

Sets the Cycle increment for Save Results On for a load step.

EXDAnalysisSettings.SetSaveResultsOnType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDSaveResultsOnType) None#

Sets the Save Results Type for a load step.

EXDAnalysisSettings.SetStaticDamping(stepNumber: int, value: float) None#

Sets the StaticDamping.

EXDAnalysisSettings.SetStepEndTime(stepNumber: int, value: Ansys.Core.Units.Quantity) None#

Sets the Step End Time for a given solution step.

EXDAnalysisSettings.getADRConvergenceMethod(stepNumber: int) Ansys.Mechanical.DataModel.Enums.EXDADRConvergenceMethod#

Gets the Covergence Method for ADR loadstep.

EXDAnalysisSettings.getADRConvergenceTolerance(stepNumber: int) Any#

Gets the Covergence Tolerance for ADR loadstep.

EXDAnalysisSettings.getADRMaximumIterations(stepNumber: int) Any#

Gets the Maximum Iterations for ADR loadstep.

EXDAnalysisSettings.setADRConvergenceMethod(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDADRConvergenceMethod) None#

Sets the Covergence Method for ADR loadstep.

EXDAnalysisSettings.setADRConvergenceTolerance(stepNumber: int, value: float) None#

Sets the Covergence Tolerance for ADR loadstep.

EXDAnalysisSettings.setADRMaximumIterations(stepNumber: int, value: int) None#

Sets the Maximum Iterations for ADR loadstep.