`Mesh`#

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.MeshControls.Mesh#

Bases: object

Defines a Mesh.

Overview#

Methods

`PreviewWelds`	Preview Welds.
`PreviewMeshOnWelds`	PreviewMeshOnWelds method.
`PreviewMeshOnWeld`	Preview model mesh on one weld control provided.
`PreviewMeshOnAllWelds`	Preview model mesh on all weld controls of the Mesh.
`ShowOverlappingFaces`	Run the ShowOverlappingFaces action.
`ShowUnconnectedFacesNearEdges`	Run the ShowUnconnectedFreeEdges action.
`PreviewMeshOnWeldWorksheet`	PreviewMeshOnWeldWorksheet method.
`ClearGeneratedData`	Run the ClearGeneratedData action.
`CleanPartOrBody`	Clear generated data for parts and/or bodies provided.
`AddNodeMergeGroup`	Add a new NodeMergeGroup.
`AddNodeMerge`	Add a new NodeMerge.
`AddAutomaticMethod`	Creates a new AutomaticMethod
`AddMeshConnectionGroup`	Add a new MeshConnectionGroup.
`AddContactMatchGroup`	Add a new AddContactMatchGroup.
`AddManualMeshConnection`	Add a new ManualMeshConnection
`AddPullExtrude`	Add a new Pull (Extrude).
`AddPullRevolve`	Add a new Pull (Revolve).
`AddPullSurfaceCoating`	Add a new Pull (Surface Coating)).
`AddDirectMorph`	Add a new DirectMorph.
`AddDeviation`	Creates a new SagControl
`AddWasher`	Creates a new SagControl
`AddWeld`	Creates a new WeldControl
`AddRepairTopology`	Creates a new RepairTopology
`AddConnect`	Creates a new Connect Control
`AddFeatureSuppress`	Creates a new FeatureSuppress
`AddGeometryFidelity`	Creates a new GeometryFidelity
`AddMeshCopy`	Creates a new MeshCopy
`PinchControlGeomtry`	Set the geometry type for the Pinch Control.
`IsMeshMetricVisible`	IsMeshMetricVisible method.
`GetIsShellTargetMetric`	Get Shell Target Metric
`GetActiveSurfaceMeshQuality`	Get Active User Mesh Quality
`GetSurfaceMeshQualityName`	Get Mesh Quality Name
`GetSurfaceMeshQualityWarningLimit`	Get User Mesh Quality Warning Limit
`GetSurfaceMeshQualityErrorLimit`	Get User Mesh Quality Error Limit
`GetSurfaceMeshQualityPercentageFailed`	Get Mesh Quality Percentage Failed
`GetSurfaceMeshQualityCountFailed`	Get Mesh Quality Count Failed
`GetSurfaceMeshQualityWarningPercentageFailed`	Get Mesh Quality Warning Percentage Failed
`GetSurfaceMeshQualityWarningCountFailed`	Get Mesh Quality Warning Count Failed
`GetSurfaceMeshQualityWorstMetricValue`	Get Mesh Quality Worst Metric Value
`GetSurfaceMeshQualityAverageMetricValue`	Get Mesh Quality Average Metric Value
`SetActiveSurfaceMeshQuality`	Set Active Mesh Quality
`SetSurfaceMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`SetSurfaceMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`SetSurfaceMeshQualityErrorLimit`	Set Mesh Quality Error Level
`SetSurfaceMeshQualityErrorLimit`	Set Mesh Quality Error Level
`CreateMQSurfaceElementsNamedSelection`	Create Mesh Quality Surface Element Named Selection
`GetIsSolidTargetMetric`	Get Solid Target Metric
`GetVolumeMeshQualityName`	Get Mesh Quality Name
`GetVolumeMeshQualityWarningLimit`	Get Mesh Quality Warning Limit
`GetVolumeMeshQualityErrorLimit`	Get Mesh Quality Error Limit
`GetVolumeMeshQualityPercentageFailed`	Get Mesh Quality Percentage Failed
`GetVolumeMeshQualityCountFailed`	Get Mesh Quality Count Failed
`GetVolumeMeshQualityWarningPercentageFailed`	Get Mesh Quality Warning Percentage Failed
`GetVolumeMeshQualityWarningCountFailed`	Get Mesh Quality Warning Count Failed
`GetVolumeMeshQualityWorstMetricValue`	Get Mesh Quality Worst Metric Value
`GetVolumeMeshQualityAverageMetricValue`	Get Mesh Quality Average Metric Value
`GetVolumeMeshQualityWorstMetricBackgroundColor`	Get Mesh Quality Worst Metric BackgroundColor
`SetActiveVolumeMeshQuality`	Set Active Mesh Quality
`SetVolumeMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`SetVolumeMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`SetVolumeMeshQualityErrorLimit`	Set Mesh Quality Error Limit
`SetVolumeMeshQualityErrorLimit`	Set Mesh Quality Error Limit
`CreateMQVolumeElementsNamedSelection`	Create Mesh Quality Volume Element Name Selection
`GetIsSolidSurfaceTargetMetric`	Get SolidSurface Target Metric
`GetSolidSurfaceMeshQualityName`	Get Mesh Quality Name
`GetSolidSurfaceMeshQualityWarningLimit`	Get Mesh Quality Warning Limit
`GetSolidSurfaceMeshQualityErrorLimit`	Get Mesh Quality Error Limit
`GetSolidSurfaceMeshQualityPercentageFailed`	Get Mesh Quality Percentage Failed
`GetSolidSurfaceMeshQualityCountFailed`	Get Mesh Quality Count Failed
`GetSolidSurfaceMeshQualityWarningPercentageFailed`	Get Mesh Quality Warning Percentage Failed
`GetSolidSurfaceMeshQualityWarningCountFailed`	Get Mesh Quality Warning Count Failed
`GetSolidSurfaceMeshQualityWorstMetricValue`	Get Mesh Quality Worst Metric Value
`GetSolidSurfaceMeshQualityAverageMetricValue`	Get Mesh Quality Average Metric Value
`GetSolidSurfaceMeshQualityWorstMetricBackgroundColor`	Get Mesh Quality Worst Metric BackgroundColor
`SetActiveSolidSurfaceMeshQuality`	Set Active Mesh Quality
`SetSolidSurfaceMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`SetSolidSurfaceMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`SetSolidSurfaceMeshQualityErrorLimit`	Set Mesh Quality Error Limit
`SetSolidSurfaceMeshQualityErrorLimit`	Set Mesh Quality Error Limit
`CreateMQSolidSurfaceElementsNamedSelection`	Create Mesh Quality SolidSurface Element Name Selection
`LoadMQWorksheetFile`	LoadMQWorksheetFile method.
`SaveMQWorksheetFile`	SaveMQWorksheetFile method.
`GetVolumeMeshMetrics`	GetVolumeMeshMetrics method.
`GetSolidSurfaceMeshMetrics`	GetSolidSurfaceMeshMetrics method.
`SetSurfaceMeshMetricLimits`	SetSurfaceMeshMetricLimits method.
`SetSolidMeshMetricLimits`	SetSolidMeshMetricLimits method.
`SetSolidSurfaceMeshMetricLimits`	SetSolidSurfaceMeshMetricLimits method.
`ActivateAllSurfaceWorksheetRows`	ActivateAllSurfaceWorksheetRows method.
`ActivateAllVolumeWorksheetRows`	ActivateAllVolumeWorksheetRows method.
`ActivateAllSolidSurfaceWorksheetRows`	ActivateAllSolidSurfaceWorksheetRows method.
`DeactivateAllSurfaceWorksheetRows`	DeactivateAllSurfaceWorksheetRows method.
`DeactivateAllVolumeWorksheetRows`	DeactivateAllVolumeWorksheetRows method.
`DeactivateAllSolidSurfaceWorksheetRows`	DeactivateAllSolidSurfaceWorksheetRows method.
`SetMeshMetricOptions`	SetMeshMetricOptions method.
`GetMeshMetricOptions`	GetMeshMetricOptions method.
`AddContactSizing`	Creates a new ContactSizing
`AddFaceMeshing`	Creates a new FaceMeshing
`AddInflation`	Creates a new Inflation
`AddMatchControl`	Creates a new MatchControl
`AddPinch`	Creates a new Pinch
`AddRefinement`	Creates a new Refinement
`AddSizing`	Creates a new Sizing
`CreatePinchControls`	Run the CreatePinchControls action.
`GenerateMesh`	Run the GenerateMesh action.
`PreviewInflation`	Run the PreviewInflation action.
`PreviewSurfaceMesh`	Run the PreviewSurfaceMesh action.
`ShowFeatureSuppressibleFaces`	Run the ShowFeatureSuppressibleFaces action.
`ShowMappableBodies`	Run the ShowMappableBodies action.
`ShowSweepableBodies`	Run the ShowSweepableBodies action.
`Update`	Run the Update action.
`GetChildren`	Gets the list of children, filtered by type.
`GetChildren`	Gets the list of children, filtered by type.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`Activate`	Activate the current object.
`CopyTo`	Copies all visible properties from this object to another.
`Duplicate`	Creates a copy of the current DataModelObject.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PropertyByName`	Get a property by its unique name.
`PropertyByAPIName`	Get a property by its API name.
`CreateParameter`	Creates a new parameter for a Property.
`GetParameter`	Gets the parameter corresponding to the given property.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.

Properties

`Worksheet`	Get the MeshControlWorksheet action.
`ElementSize`	Gets or sets the ElementSize.
`RigidBodyFaceMeshType`	Gets or sets the RigidBodyFaceMeshType.
`RigidBodyBehavior`	Gets or sets the BoundaryCondition.
`CurrentConfiguration`	Gets the Assembly Mesh’s current configuration Id.
`MinimizeNumTriangles`	Gets or sets the TriangleReduction option for Batch Connections.
`NumberOfShellMeshQualityMetrics`	Gets the number of Mesh Quality Metrics
`GlobalUseCustomTargetLimit`	Gets or sets the GlobalUseCustomTargetLimit.
`InternalObject`	Gets the internal object. For advanced usage only.
`ConnectionTolerance`	Gets or sets the ConnectionTolerance.
`ConnectionToleranceList`	Gets or sets the ConnectionToleranceList.
`UseAdvancedSizeFunction`	Gets or sets the UseAdvancedSizeFunction.
`Method`	Gets or sets the Method.
`UseAutomaticInflation`	Gets or sets the UseAutomaticInflation.
`AutomaticMeshBasedDefeaturing`	Gets or sets the AutomaticMeshBasedDefeaturing.
`Beam3`	Gets the Beam3.
`Beam4`	Gets the Beam4.
`BeamElements`	Gets the BeamElements.
`CheckMeshQuality`	Gets or sets the CheckMeshQuality.
`CollisionAvoidance`	Gets or sets the CollisionAvoidance.
`ConnectionSize`	Gets or sets the ConnectionSize.
`CornerNodes`	Gets the CornerNodes.
`Elements`	Gets the Elements.
`GrowthRate`	Gets or sets the GrowthRate.
`GrowthRateType`	Gets or sets the GrowthRateType.
`GasketElements`	Gets the GasketElements.
`Hex20`	Gets the Hex20.
`Hex8`	Gets the Hex8.
`HoleRemovalTolerance`	Gets or sets the HoleRemovalTolerance.
`InflationAlgorithm`	Gets or sets the InflationAlgorithm.
`MaximumHeightOverBase`	Gets or sets the MaximumHeightOverBase.
`FilletRatio`	Gets or sets the FilletRatio.
`InflationOption`	Gets or sets the InflationOption.
`InitialSizeSeed`	Gets or sets the InitialSizeSeed.
`AspectRatio`	Gets or sets the AspectRatio.
`Line2`	Gets the Line2.
`Line3`	Gets the Line3.
`MaximumLayers`	Gets or sets the MaximumLayers.
`MidNodes`	Gets the MidNodes.
`Nodes`	Gets the Nodes.
`NumberOfRetries`	Gets or sets the NumberOfRetries.
`ProximityGapFactor`	Gets or sets the ProximityGapFactor.
`NumberOfCPUsForParallelPartMeshing`	Gets or sets the NumberOfCPUsForParallelPartMeshing.
`OrientationNodes`	Gets the OrientationNodes.
`GeneratePinchOnRefresh`	Gets or sets the GeneratePinchOnRefresh.
`Pyramid13`	Gets the Pyramid13.
`Pyramid5`	Gets the Pyramid5.
`Quad4`	Gets the Quad4.
`Quad8`	Gets the Quad8.
`Relevance`	Gets or sets the Relevance.
`RelevanceCenter`	Gets or sets the RelevanceCenter.
`Resolution`	Gets or sets the Resolution.
`ShapeChecking`	Gets or sets the ShapeChecking.
`SharedNodes`	Gets the SharedNodes.
`ShellElements`	Gets the ShellElements.
`SmoothingIterations`	Gets or sets the SmoothingIterations.
`Smoothing`	Gets or sets the Smoothing.
`SolidElements`	Gets the SolidElements.
`SolidShellElements`	Gets the SolidShellElements.
`SpanAngleCenter`	Gets or sets the SpanAngleCenter.
`TargetExplicitAspectRatio`	Gets or sets the TargetExplicitAspectRatio.
`TargetQuality`	Gets or sets the TargetQuality.
`Tet10`	Gets the Tet10.
`Tet4`	Gets the Tet4.
`TransitionOption`	Gets or sets the TransitionOption.
`TransitionRatio`	Gets or sets the TransitionRatio.
`GrowthRateSF`	Gets or sets the GrowthRateSF.
`Tri3`	Gets the Tri3.
`Tri6`	Gets the Tri6.
`TriangleSurfaceMesher`	Gets or sets the TriangleSurfaceMesher.
`UsePostSmoothing`	Gets or sets the UsePostSmoothing.
`Wedge15`	Gets the Wedge15.
`Wedge6`	Gets the Wedge6.
`CoplanarAngleTol`	Gets or sets the CoplanarAngleTol.
`FirstLayerHeight`	Gets or sets the FirstLayerHeight.
`MaximumAngle`	Gets or sets the MaximumAngle.
`MaximumThickness`	Gets or sets the MaximumThickness.
`MaximumSize`	Gets or sets the MaximumSize.
`DefeatureTolerance`	Gets or sets the DefeatureTolerance.
`Average`	Gets the Average.
`Maximum`	Gets the Maximum.
`Minimum`	Gets the Minimum.
`StandardDeviation`	Gets the StandardDeviation.
`MinimumEdgeLength`	Gets the MinimumEdgeLength.
`MinimumSize`	Gets or sets the MinimumSize.
`PinchTolerance`	Gets or sets the PinchTolerance.
`ProximityMinimumSize`	Gets or sets the ProximityMinimumSize.
`CurvatureNormalAngle`	Gets or sets the CurvatureNormalAngle.
`TargetCharacteristicLength`	Gets or sets the TargetCharacteristicLength.
`TargetSkewness`	Gets or sets the TargetSkewness.
`DisplayStyle`	Gets or sets the DisplayStyle.
`ElementOrder`	Gets or sets the ElementOrder.
`ExportFormat`	Gets or sets the ExportFormat.
`InflationElementType`	Gets or Sets the InflationElementType
`MeshMetric`	Gets or sets the MeshMetric.
`PhysicsPreference`	Gets or sets the PhysicsPreference.
`ExportUnit`	Gets or sets the ExportUnit.
`ProximitySizeSources`	Gets or sets the ProximitySizeSources.
`SolverPreference`	Gets or sets the SolverPreference.
`ViewAdvancedOptions`	Gets or sets the ViewAdvancedOptions.
`CaptureCurvature`	Gets or sets the CaptureCurvature.
`CaptureProximity`	Gets or sets the CaptureProximity.
`ExtraRetriesForAssembly`	Gets or sets the ExtraRetriesForAssembly.
`MeshMorphing`	Gets or sets the MeshMorphing.
`MultiConnectionSteps`	Gets or sets the MultiConnectionSteps.
`UseSheetThicknessForPinch`	Gets or sets the UseSheetThicknessForPinch.
`ReadOnly`	Gets the ReadOnly.
`SheetLoopRemoval`	Gets or sets the SheetLoopRemoval.
`ShowDetailedStatistics`	Gets or sets the ShowDetailedStatistics.
`StraightSidedElements`	Gets or sets the StraightSidedElements.
`TopologyChecking`	Gets or sets the TopologyChecking.
`UseAdaptiveSizing`	Gets or sets the UseAdaptiveSizing.
`UseFixedSizeFunctionForSheets`	Gets or sets the UseFixedSizeFunctionForSheets.
`QuadMesh`	Gets or sets the QuadMesh.
`MeshBasedConnection`	Gets or sets the MeshBasedConnection.
`NamedSelection`	Gets or sets the NamedSelection.
`DataModelObjectCategory`	Gets the current DataModelObject’s category.
`Children`	Gets the list of children.
`Comments`	Gets the list of associated comments.
`Figures`	Gets the list of associated figures.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`Properties`	Gets the list of properties for this object.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Property detail#

property Mesh.Worksheet: Ansys.ACT.Interfaces.Common.IWorksheet | None: Get the MeshControlWorksheet action.

property Mesh.ElementSize: Ansys.Core.Units.Quantity | None: Gets or sets the ElementSize.

property Mesh.RigidBodyFaceMeshType: Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyFaceMeshType | None: Gets or sets the RigidBodyFaceMeshType.

property Mesh.RigidBodyBehavior: Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyBehaviorType | None: Gets or sets the BoundaryCondition.

property Mesh.CurrentConfiguration: System.Int32 | None: Gets the Assembly Mesh’s current configuration Id.

property Mesh.MinimizeNumTriangles: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None: Gets or sets the TriangleReduction option for Batch Connections.

property Mesh.NumberOfShellMeshQualityMetrics: System.UInt32 | None: Gets the number of Mesh Quality Metrics

property Mesh.GlobalUseCustomTargetLimit: System.Int32 | None: Gets or sets the GlobalUseCustomTargetLimit.

property Mesh.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlGroupAuto | None: Gets the internal object. For advanced usage only.

property Mesh.ConnectionTolerance: System.Double | None: Gets or sets the ConnectionTolerance.

property Mesh.ConnectionToleranceList: System.String | None: Gets or sets the ConnectionToleranceList.

property Mesh.UseAdvancedSizeFunction: System.Int32 | None: Gets or sets the UseAdvancedSizeFunction.

property Mesh.Method: System.Int32 | None: Gets or sets the Method.

property Mesh.UseAutomaticInflation: System.Int32 | None: Gets or sets the UseAutomaticInflation.

property Mesh.AutomaticMeshBasedDefeaturing: System.Int32 | None: Gets or sets the AutomaticMeshBasedDefeaturing.

property Mesh.Beam3: System.Int32 | None: Gets the Beam3.

property Mesh.Beam4: System.Int32 | None: Gets the Beam4.

property Mesh.BeamElements: System.Int32 | None: Gets the BeamElements.

property Mesh.CheckMeshQuality: System.UInt32 | None: Gets or sets the CheckMeshQuality.

property Mesh.CollisionAvoidance: System.Int32 | None: Gets or sets the CollisionAvoidance.

property Mesh.ConnectionSize: System.Double | None: Gets or sets the ConnectionSize.

property Mesh.CornerNodes: System.Int32 | None: Gets the CornerNodes.

property Mesh.Elements: System.Int32 | None: Gets the Elements.

property Mesh.GrowthRate: System.Double | None: Gets or sets the GrowthRate.

property Mesh.GrowthRateType: System.Int32 | None: Gets or sets the GrowthRateType.

property Mesh.GasketElements: System.Int32 | None: Gets the GasketElements.

property Mesh.Hex20: System.Int32 | None: Gets the Hex20.

property Mesh.Hex8: System.Int32 | None: Gets the Hex8.

property Mesh.HoleRemovalTolerance: System.Double | None: Gets or sets the HoleRemovalTolerance.

property Mesh.InflationAlgorithm: System.Int32 | None: Gets or sets the InflationAlgorithm.

property Mesh.MaximumHeightOverBase: System.Double | None: Gets or sets the MaximumHeightOverBase.

property Mesh.FilletRatio: System.Double | None: Gets or sets the FilletRatio.

property Mesh.InflationOption: System.Int32 | None: Gets or sets the InflationOption.

property Mesh.InitialSizeSeed: System.Int32 | None: Gets or sets the InitialSizeSeed.

property Mesh.AspectRatio: System.Double | None: Gets or sets the AspectRatio.

property Mesh.Line2: System.Int32 | None: Gets the Line2.

property Mesh.Line3: System.Int32 | None: Gets the Line3.

property Mesh.MaximumLayers: System.Int32 | None: Gets or sets the MaximumLayers.

property Mesh.MidNodes: System.Int32 | None: Gets the MidNodes.

property Mesh.Nodes: System.Int32 | None: Gets the Nodes.

property Mesh.NumberOfRetries: System.Int32 | None: Gets or sets the NumberOfRetries.

property Mesh.ProximityGapFactor: System.Double | None: Gets or sets the ProximityGapFactor.

property Mesh.NumberOfCPUsForParallelPartMeshing: System.Int32 | None: Gets or sets the NumberOfCPUsForParallelPartMeshing.

property Mesh.OrientationNodes: System.Int32 | None: Gets the OrientationNodes.

property Mesh.GeneratePinchOnRefresh: System.Int32 | None: Gets or sets the GeneratePinchOnRefresh.

property Mesh.Pyramid13: System.Int32 | None: Gets the Pyramid13.

property Mesh.Pyramid5: System.Int32 | None: Gets the Pyramid5.

property Mesh.Quad4: System.Int32 | None: Gets the Quad4.

property Mesh.Quad8: System.Int32 | None: Gets the Quad8.

property Mesh.Relevance: System.Int32 | None: Gets or sets the Relevance.

property Mesh.RelevanceCenter: System.Int32 | None: Gets or sets the RelevanceCenter.

property Mesh.Resolution: System.Int32 | None: Gets or sets the Resolution.

property Mesh.ShapeChecking: System.Int32 | None: Gets or sets the ShapeChecking.

property Mesh.SharedNodes: System.Int32 | None: Gets the SharedNodes.

property Mesh.ShellElements: System.Int32 | None: Gets the ShellElements.

property Mesh.SmoothingIterations: System.Int32 | None: Gets or sets the SmoothingIterations.

property Mesh.Smoothing: System.Int32 | None: Gets or sets the Smoothing.

property Mesh.SolidElements: System.Int32 | None: Gets the SolidElements.

property Mesh.SolidShellElements: System.Int32 | None: Gets the SolidShellElements.

property Mesh.SpanAngleCenter: System.Int32 | None: Gets or sets the SpanAngleCenter.

property Mesh.TargetExplicitAspectRatio: System.Double | None: Gets or sets the TargetExplicitAspectRatio.

property Mesh.TargetQuality: System.Double | None: Gets or sets the TargetQuality.

property Mesh.Tet10: System.Int32 | None: Gets the Tet10.

property Mesh.Tet4: System.Int32 | None: Gets the Tet4.

property Mesh.TransitionOption: System.Int32 | None: Gets or sets the TransitionOption.

property Mesh.TransitionRatio: System.Double | None: Gets or sets the TransitionRatio.

property Mesh.GrowthRateSF: System.Double | None: Gets or sets the GrowthRateSF.

property Mesh.Tri3: System.Int32 | None: Gets the Tri3.

property Mesh.Tri6: System.Int32 | None: Gets the Tri6.

property Mesh.TriangleSurfaceMesher: System.Int32 | None: Gets or sets the TriangleSurfaceMesher.

property Mesh.UsePostSmoothing: System.Int32 | None: Gets or sets the UsePostSmoothing.

property Mesh.Wedge15: System.Int32 | None: Gets the Wedge15.

property Mesh.Wedge6: System.Int32 | None: Gets the Wedge6.

property Mesh.CoplanarAngleTol: Ansys.Core.Units.Quantity | None: Gets or sets the CoplanarAngleTol.

property Mesh.FirstLayerHeight: Ansys.Core.Units.Quantity | None: Gets or sets the FirstLayerHeight.

property Mesh.MaximumAngle: Ansys.Core.Units.Quantity | None: Gets or sets the MaximumAngle.

property Mesh.MaximumThickness: Ansys.Core.Units.Quantity | None: Gets or sets the MaximumThickness.

property Mesh.MaximumSize: Ansys.Core.Units.Quantity | None: Gets or sets the MaximumSize.

property Mesh.DefeatureTolerance: Ansys.Core.Units.Quantity | None: Gets or sets the DefeatureTolerance.

property Mesh.Average: Ansys.Core.Units.Quantity | None: Gets the Average.

property Mesh.Maximum: Ansys.Core.Units.Quantity | None: Gets the Maximum.

property Mesh.Minimum: Ansys.Core.Units.Quantity | None: Gets the Minimum.

property Mesh.StandardDeviation: Ansys.Core.Units.Quantity | None: Gets the StandardDeviation.

property Mesh.MinimumEdgeLength: Ansys.Core.Units.Quantity | None: Gets the MinimumEdgeLength.

property Mesh.MinimumSize: Ansys.Core.Units.Quantity | None: Gets or sets the MinimumSize.

property Mesh.PinchTolerance: Ansys.Core.Units.Quantity | None: Gets or sets the PinchTolerance.

property Mesh.ProximityMinimumSize: Ansys.Core.Units.Quantity | None: Gets or sets the ProximityMinimumSize.

property Mesh.CurvatureNormalAngle: Ansys.Core.Units.Quantity | None: Gets or sets the CurvatureNormalAngle.

property Mesh.TargetCharacteristicLength: Ansys.Core.Units.Quantity | None: Gets or sets the TargetCharacteristicLength.

property Mesh.TargetSkewness: Ansys.Core.Units.Quantity | None: Gets or sets the TargetSkewness.

property Mesh.DisplayStyle: Ansys.Mechanical.DataModel.Enums.MeshDisplayStyle | None: Gets or sets the DisplayStyle.

property Mesh.ElementOrder: Ansys.Mechanical.DataModel.Enums.ElementOrder | None: Gets or sets the ElementOrder.

property Mesh.ExportFormat: Ansys.Mechanical.DataModel.Enums.FluentExportMeshType | None: Gets or sets the ExportFormat.

property Mesh.InflationElementType: Ansys.Mechanical.DataModel.Enums.MeshInflationElementType | None: Gets or Sets the InflationElementType

property Mesh.MeshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType | None: Gets or sets the MeshMetric.

property Mesh.PhysicsPreference: Ansys.Mechanical.DataModel.Enums.MeshPhysicsPreferenceType | None: Gets or sets the PhysicsPreference.

property Mesh.ExportUnit: Ansys.Mechanical.DataModel.Enums.PolyflowExportUnit | None: Gets or sets the ExportUnit.

property Mesh.ProximitySizeSources: Ansys.Mechanical.DataModel.Enums.ProximitySFSourcesType | None: Gets or sets the ProximitySizeSources.

property Mesh.SolverPreference: Ansys.Mechanical.DataModel.Enums.MeshSolverPreferenceType | None: Gets or sets the SolverPreference.

property Mesh.ViewAdvancedOptions: System.Boolean | None: Gets or sets the ViewAdvancedOptions.

property Mesh.CaptureCurvature: System.Boolean | None: Gets or sets the CaptureCurvature.

property Mesh.CaptureProximity: System.Boolean | None: Gets or sets the CaptureProximity.

property Mesh.ExtraRetriesForAssembly: System.Boolean | None: Gets or sets the ExtraRetriesForAssembly.

property Mesh.MeshMorphing: System.Boolean | None: Gets or sets the MeshMorphing.

property Mesh.MultiConnectionSteps: System.Boolean | None: Gets or sets the MultiConnectionSteps.

property Mesh.UseSheetThicknessForPinch: System.Boolean | None: Gets or sets the UseSheetThicknessForPinch.

property Mesh.ReadOnly: System.Boolean | None: Gets the ReadOnly.

property Mesh.SheetLoopRemoval: System.Boolean | None: Gets or sets the SheetLoopRemoval.

property Mesh.ShowDetailedStatistics: System.Boolean | None: Gets or sets the ShowDetailedStatistics.

property Mesh.StraightSidedElements: System.Boolean | None: Gets or sets the StraightSidedElements.

property Mesh.TopologyChecking: System.Boolean | None: Gets or sets the TopologyChecking.

property Mesh.UseAdaptiveSizing: System.Boolean | None: Gets or sets the UseAdaptiveSizing.

property Mesh.UseFixedSizeFunctionForSheets: System.Boolean | None: Gets or sets the UseFixedSizeFunctionForSheets.

property Mesh.QuadMesh: System.Boolean | None: Gets or sets the QuadMesh.

property Mesh.MeshBasedConnection: System.Boolean | None: Gets or sets the MeshBasedConnection.

property Mesh.NamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None: Gets or sets the NamedSelection.

property Mesh.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None: Gets the current DataModelObject’s category.

property Mesh.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets the list of children.

property Mesh.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None: Gets the list of associated comments.

property Mesh.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None: Gets the list of associated figures.

property Mesh.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None: Gets the list of associated images.

property Mesh.InternalObject: System.Object | None: Gets the internal object. For advanced usage only.

property Mesh.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties for this object.

property Mesh.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties that are visible for this object.

Method detail#

Mesh.PreviewWelds() → System.Void: Preview Welds.

Mesh.PreviewMeshOnWelds(dataModelObjects: System.Collections.Generic.IEnumerable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Void: PreviewMeshOnWelds method.

Mesh.PreviewMeshOnWeld(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → System.Void: Preview model mesh on one weld control provided.

Mesh.PreviewMeshOnAllWelds() → System.Void: Preview model mesh on all weld controls of the Mesh.

Mesh.ShowOverlappingFaces() → System.Void: Run the ShowOverlappingFaces action.

Mesh.ShowUnconnectedFacesNearEdges() → System.Void: Run the ShowUnconnectedFreeEdges action.

Mesh.PreviewMeshOnWeldWorksheet(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject, indices: System.Collections.Generic.IEnumerable[System.Int32]) → System.Void: PreviewMeshOnWeldWorksheet method.

Mesh.ClearGeneratedData() → System.Void: Run the ClearGeneratedData action.

Mesh.CleanPartOrBody(dataModelObjects: System.Collections.IEnumerable) → System.Void: Clear generated data for parts and/or bodies provided.

Mesh.AddNodeMergeGroup() → Ansys.ACT.Automation.Mechanical.NodeMergeGroup: Add a new NodeMergeGroup.

Mesh.AddNodeMerge() → System.Void: Add a new NodeMerge.

Mesh.AddAutomaticMethod() → Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod: Creates a new AutomaticMethod

Mesh.AddMeshConnectionGroup() → Ansys.ACT.Automation.Mechanical.MeshConnectionGroup: Add a new MeshConnectionGroup.

Mesh.AddContactMatchGroup() → Ansys.ACT.Automation.Mechanical.ContactMatchGroup: Add a new AddContactMatchGroup.

Mesh.AddManualMeshConnection() → System.Void: Add a new ManualMeshConnection

Mesh.AddPullExtrude() → Ansys.ACT.Automation.Mechanical.MeshExtrude: Add a new Pull (Extrude).

Mesh.AddPullRevolve() → Ansys.ACT.Automation.Mechanical.MeshExtrude: Add a new Pull (Revolve).

Mesh.AddPullSurfaceCoating() → Ansys.ACT.Automation.Mechanical.MeshExtrude: Add a new Pull (Surface Coating)).

Mesh.AddDirectMorph() → Ansys.ACT.Automation.Mechanical.DirectMorph: Add a new DirectMorph.

Mesh.AddDeviation() → Ansys.ACT.Automation.Mechanical.MeshControls.Deviation: Creates a new SagControl

Mesh.AddWasher() → Ansys.ACT.Automation.Mechanical.MeshControls.Washer: Creates a new SagControl

Mesh.AddWeld() → Ansys.ACT.Automation.Mechanical.MeshControls.Weld: Creates a new WeldControl

Mesh.AddRepairTopology() → Ansys.ACT.Automation.Mechanical.MeshControls.RepairTopology: Creates a new RepairTopology

Mesh.AddConnect() → Ansys.ACT.Automation.Mechanical.MeshControls.Connect: Creates a new Connect Control

Mesh.AddFeatureSuppress() → Ansys.ACT.Automation.Mechanical.MeshControls.FeatureSuppress: Creates a new FeatureSuppress

Mesh.AddGeometryFidelity() → Ansys.ACT.Automation.Mechanical.MeshControls.GeometryFidelity: Creates a new GeometryFidelity

Mesh.AddMeshCopy() → Ansys.ACT.Automation.Mechanical.MeshControls.MeshCopy: Creates a new MeshCopy

Mesh.PinchControlGeomtry(geomType: Ansys.Mechanical.DataModel.Enums.MeshControlPinchGeomtryType) → System.Void: Set the geometry type for the Pinch Control.

Mesh.IsMeshMetricVisible(index: System.UInt32) → System.Boolean: IsMeshMetricVisible method.

Mesh.GetIsShellTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get Shell Target Metric

Mesh.GetActiveSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Boolean: Get Active User Mesh Quality

Mesh.GetSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.String: Get Mesh Quality Name

Mesh.GetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get User Mesh Quality Warning Limit

Mesh.GetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get User Mesh Quality Error Limit

Mesh.GetSurfaceMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Double: Get Mesh Quality Percentage Failed

Mesh.GetSurfaceMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get Mesh Quality Count Failed

Mesh.GetSurfaceMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Double: Get Mesh Quality Warning Percentage Failed

Mesh.GetSurfaceMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get Mesh Quality Warning Count Failed

Mesh.GetSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Worst Metric Value

Mesh.GetSurfaceMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Average Metric Value

Mesh.SetActiveSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: System.Double) → System.Void: Set Active Mesh Quality

Mesh.SetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: System.Double) → System.Void: Set Mesh Quality Warning Limit

Mesh.SetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: Ansys.Core.Units.Quantity) → System.Void: Set Mesh Quality Warning Limit

Mesh.SetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: System.Double) → System.Void: Set Mesh Quality Error Level

Mesh.SetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: Ansys.Core.Units.Quantity) → System.Void: Set Mesh Quality Error Level

Mesh.CreateMQSurfaceElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: System.UInt32) → System.Void: Create Mesh Quality Surface Element Named Selection

Mesh.GetIsSolidTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get Solid Target Metric

Mesh.GetVolumeMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.String: Get Mesh Quality Name

Mesh.GetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Warning Limit

Mesh.GetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Error Limit

Mesh.GetVolumeMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Double: Get Mesh Quality Percentage Failed

Mesh.GetVolumeMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get Mesh Quality Count Failed

Mesh.GetVolumeMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Double: Get Mesh Quality Warning Percentage Failed

Mesh.GetVolumeMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get Mesh Quality Warning Count Failed

Mesh.GetVolumeMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Worst Metric Value

Mesh.GetVolumeMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Average Metric Value

Mesh.GetVolumeMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.String: Get Mesh Quality Worst Metric BackgroundColor

Mesh.SetActiveVolumeMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: System.Double) → System.Void: Set Active Mesh Quality

Mesh.SetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: System.Double) → System.Void: Set Mesh Quality Warning Limit

Mesh.SetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: Ansys.Core.Units.Quantity) → System.Void: Set Mesh Quality Warning Limit

Mesh.SetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: System.Double) → System.Void: Set Mesh Quality Error Limit

Mesh.SetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: Ansys.Core.Units.Quantity) → System.Void: Set Mesh Quality Error Limit

Mesh.CreateMQVolumeElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: System.UInt32) → System.Void: Create Mesh Quality Volume Element Name Selection

Mesh.GetIsSolidSurfaceTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get SolidSurface Target Metric

Mesh.GetSolidSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.String: Get Mesh Quality Name

Mesh.GetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Warning Limit

Mesh.GetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Error Limit

Mesh.GetSolidSurfaceMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Double: Get Mesh Quality Percentage Failed

Mesh.GetSolidSurfaceMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get Mesh Quality Count Failed

Mesh.GetSolidSurfaceMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Double: Get Mesh Quality Warning Percentage Failed

Mesh.GetSolidSurfaceMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.Int32: Get Mesh Quality Warning Count Failed

Mesh.GetSolidSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Worst Metric Value

Mesh.GetSolidSurfaceMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity: Get Mesh Quality Average Metric Value

Mesh.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → System.String: Get Mesh Quality Worst Metric BackgroundColor

Mesh.SetActiveSolidSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: System.Double) → System.Void: Set Active Mesh Quality

Mesh.SetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: System.Double) → System.Void: Set Mesh Quality Warning Limit

Mesh.SetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: Ansys.Core.Units.Quantity) → System.Void: Set Mesh Quality Warning Limit

Mesh.SetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: System.Double) → System.Void: Set Mesh Quality Error Limit

Mesh.SetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: Ansys.Core.Units.Quantity) → System.Void: Set Mesh Quality Error Limit

Mesh.CreateMQSolidSurfaceElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: System.UInt32) → System.Void: Create Mesh Quality SolidSurface Element Name Selection

Mesh.LoadMQWorksheetFile(filePath: System.String) → System.Void: LoadMQWorksheetFile method.

Mesh.SaveMQWorksheetFile(filePath: System.String) → System.Void: SaveMQWorksheetFile method.

Mesh.GetVolumeMeshMetrics() → Ansys.Mechanical.DataModel.Enums.MeshMetricType: GetVolumeMeshMetrics method.

Mesh.GetSolidSurfaceMeshMetrics() → Ansys.Mechanical.DataModel.Enums.MeshMetricType: GetSolidSurfaceMeshMetrics method.

Mesh.SetSurfaceMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → System.Void: SetSurfaceMeshMetricLimits method.

Mesh.SetSolidMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → System.Void: SetSolidMeshMetricLimits method.

Mesh.SetSolidSurfaceMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → System.Void: SetSolidSurfaceMeshMetricLimits method.

Mesh.ActivateAllSurfaceWorksheetRows() → System.Void: ActivateAllSurfaceWorksheetRows method.

Mesh.ActivateAllVolumeWorksheetRows() → System.Void: ActivateAllVolumeWorksheetRows method.

Mesh.ActivateAllSolidSurfaceWorksheetRows() → System.Void: ActivateAllSolidSurfaceWorksheetRows method.

Mesh.DeactivateAllSurfaceWorksheetRows() → System.Void: DeactivateAllSurfaceWorksheetRows method.

Mesh.DeactivateAllVolumeWorksheetRows() → System.Void: DeactivateAllVolumeWorksheetRows method.

Mesh.DeactivateAllSolidSurfaceWorksheetRows() → System.Void: DeactivateAllSolidSurfaceWorksheetRows method.

Mesh.SetMeshMetricOptions(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, prefValue: Ansys.Mechanical.DataModel.Enums.MetricPreference) → System.Void: SetMeshMetricOptions method.

Mesh.GetMeshMetricOptions(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Mechanical.DataModel.Enums.MetricPreference: GetMeshMetricOptions method.

Mesh.AddContactSizing() → Ansys.ACT.Automation.Mechanical.MeshControls.ContactSizing: Creates a new ContactSizing

Mesh.AddFaceMeshing() → Ansys.ACT.Automation.Mechanical.MeshControls.FaceMeshing: Creates a new FaceMeshing

Mesh.AddInflation() → Ansys.ACT.Automation.Mechanical.MeshControls.Inflation: Creates a new Inflation

Mesh.AddMatchControl() → Ansys.ACT.Automation.Mechanical.MeshControls.MatchControl: Creates a new MatchControl

Mesh.AddPinch() → Ansys.ACT.Automation.Mechanical.MeshControls.Pinch: Creates a new Pinch

Mesh.AddRefinement() → Ansys.ACT.Automation.Mechanical.MeshControls.Refinement: Creates a new Refinement

Mesh.AddSizing() → Ansys.ACT.Automation.Mechanical.MeshControls.Sizing: Creates a new Sizing

Mesh.CreatePinchControls() → System.Void: Run the CreatePinchControls action.

Mesh.GenerateMesh() → System.Void: Run the GenerateMesh action.

Mesh.PreviewInflation() → System.Void: Run the PreviewInflation action.

Mesh.PreviewSurfaceMesh() → System.Void: Run the PreviewSurfaceMesh action.

Mesh.ShowFeatureSuppressibleFaces() → System.Void: Run the ShowFeatureSuppressibleFaces action.

Mesh.ShowMappableBodies() → System.Void: Run the ShowMappableBodies action.

Mesh.ShowSweepableBodies() → System.Void: Run the ShowSweepableBodies action.

Mesh.Update() → System.Void: Run the Update action.

Mesh.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]: Gets the list of children, filtered by type.

Mesh.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Gets the list of children, filtered by type.

Mesh.AddComment() → Ansys.ACT.Automation.Mechanical.Comment: Creates a new child Comment.

Mesh.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure: Creates a new child Figure.

Mesh.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

Mesh.Activate() → System.Void: Activate the current object.

Mesh.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void: Copies all visible properties from this object to another.

Mesh.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Creates a copy of the current DataModelObject.

Mesh.GroupAllSimilarChildren() → System.Void: Run the GroupAllSimilarChildren action.

Mesh.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder: Run the GroupSimilarObjects action.

Mesh.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property: Get a property by its unique name.

Mesh.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

Mesh.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Creates a new parameter for a Property.

Mesh.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Gets the parameter corresponding to the given property.

Mesh.RemoveParameter(propName: System.String) → System.Void: Removes the parameter from the parameter set corresponding to the given property.