`SolutionInformation`#

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.SolutionInformation#

Bases: object

Defines a SolutionInformation.

Overview#

Methods

`ImportResultTrackersFromFile`	Import Result Trackers from File.
`AddDeformationPlotTracker`	Creates a new TotalDeformation Plot Tracker.
`AddStressPlotTracker`	Creates a new EquivalentStress Plot Tracker.
`AddStrainPlotTracker`	Creates a new EquivalentElasticStrainRST Plot Tracker.
`AddTemperaturePlotTracker`	Creates a new TemperatureResult Plot Tracker.
`EvaluateAllContactTrackers`	Run the EvaluateAllContactTrackers action.
`AddAddedMass`	Creates a new AddedMassTracker
`AddArtificialEnergy`	Creates a new ArtificialEnergyTracker
`AddChattering`	Creates a new ContactChatteringTracker
`AddClosedPenetration`	Creates a new ContactClosedPenetrationTracker
`AddContactDepth`	Creates a new ContactDepthTracker
`AddElasticSlip`	Creates a new ContactElasticSlipTracker
`AddContactEnergy`	Creates a new ContactEnergyTracker
`AddFluidPressure`	Creates a new ContactFluidPressureTracker
`AddContactForce`	Creates a new ContactForceTracker
`AddFrictionalDissipationEnergy`	Creates a new ContactFrictionalDissipationEnergyTracker
`AddFrictionalStress`	Creates a new ContactFrictionalStressTracker
`AddGap`	Creates a new ContactGapTracker
`AddContactHeatFlux`	Creates a new ContactHeatFluxTracker
`AddContactingArea`	Creates a new ContactingAreaTracker
`AddMaximumDampingPressure`	Creates a new ContactMaximumDampingPressureTracker
`AddMaximumGeometricSlidingDistance`	Creates a new ContactMaximumGeometricSlidingDistanceTracker
`AddContactMaximumNormalStiffness`	Creates a new ContactMaximumNormalStiffnessTracker
`AddMaximumTangentialStiffness`	Creates a new ContactMaximumTangentialStiffnessTracker
`AddContactMaxTangentialFluidPressure`	Creates a new ContactMaxTangentialFluidPressureTracker
`AddMinimumGeometricSlidingDistance`	Creates a new ContactMinimumGeometricSlidingDistanceTracker
`AddContactMinimumNormalStiffness`	Creates a new ContactMinimumNormalStiffnessTracker
`AddMinimumTangentialStiffness`	Creates a new ContactMinimumTangentialStiffnessTracker
`AddNumberSticking`	Creates a new ContactNumberStickingTracker
`AddNumberWithLargePenetration`	Creates a new ContactNumberWithLargePenetrationTracker
`AddNumberWithTooMuchSliding`	Creates a new ContactNumberWithTooMuchSlidingTracker
`AddContactPairForceConvergenceNorm`	Creates a new ContactPairForceConvergenceNormTracker
`AddPenetration`	Creates a new ContactPenetrationTracker
`AddPossibleOverconstraint`	Creates a new ContactPossibleOverconstraintTracker
`AddContactPressure`	Creates a new ContactPressureTracker
`AddResultingPinball`	Creates a new ContactResultingPinballTracker
`AddSlidingDistance`	Creates a new ContactSlidingDistanceTracker
`AddSlidingIndication`	Creates a new ContactSlidingIndicationTracker
`AddStabilizationEnergy`	Creates a new ContactStabilizationEnergyTracker
`AddStrainEnergy`	Creates a new ContactStrainEnergyTracker
`AddTangentialDampingStress`	Creates a new ContactTangentialDampingStressTracker
`AddTotalForceFromContactPressureX`	Creates a new ContactTotalForceFromContactPressureXTracker
`AddTotalForceFromContactPressureY`	Creates a new ContactTotalForceFromContactPressureYTracker
`AddTotalForceFromContactPressureZ`	Creates a new ContactTotalForceFromContactPressureZTracker
`AddTotalForceFromTangentialStressX`	Creates a new ContactTotalForceFromTangentialStressXTracker
`AddTotalForceFromTangentialStressY`	Creates a new ContactTotalForceFromTangentialStressYTracker
`AddTotalForceFromTangentialStressZ`	Creates a new ContactTotalForceFromTangentialStressZTracker
`AddVolumeLossDueToWear`	Creates a new ContactVolumeLossDueToWearTracker
`AddDampingEnergy`	Creates a new DampingEnergyTracker
`AddDensity`	Creates a new DensityTracker
`AddDirectionalAcceleration`	Creates a new DirectionalAccelerationTracker
`AddDirectionalDeformation`	Creates a new DirectionalDeformationTracker
`AddDirectionalVelocity`	Creates a new DirectionalVelocityTracker
`AddEffectiveStrain`	Creates a new EffectiveStrainTracker
`AddEffectiveStress`	Creates a new EffectiveStressTracker
`AddErodedInternalEnergy`	Creates a new ErodedInternalEnergyTracker
`AddErodedKineticEnergy`	Creates a new ErodedKineticEnergyTracker
`AddExternalForce`	Creates a new ExternalForceTracker
`AddForceReaction`	Creates a new ForceReactionTracker
`AddHourglassEnergy`	Creates a new HourglassEnergyTracker
`AddInternalEnergy`	Creates a new InternalEnergyTracker
`AddKineticEnergy`	Creates a new KineticEnergyTracker
`AddLatticeDensity`	Creates a new LatticeDensity
`AddLatticeElementalDensity`	Creates a new LatticeElementalDensity
`AddLSDYNAGeneralTracker`	Creates a new LSDYNAGeneralTracker
`AddMomentReaction`	Creates a new MomentReactionTracker
`AddMomentum`	Creates a new MomentumTracker
`AddNonLinearStabilizationEnergy`	Creates a new NonLinearStabilizationEnergyTracker
`AddNumberContacting`	Creates a new NumberContactingTracker
`AddPlasticWork`	Creates a new PlasticWorkTracker
`AddPosition`	Creates a new PositionTracker
`AddPressure`	Creates a new PressureTracker
`AddRigidBodyVelocity`	Creates a new RigidBodyVelocityTracker
`AddSpringTrackerDampingForce`	Creates a new SpringDampingForceTracker
`AddSpringTrackerElasticForce`	Creates a new SpringElasticForceTracker
`AddSpringTrackerElongation`	Creates a new SpringElongationTracker
`AddSpringTrackerVelocity`	Creates a new SpringVelocityTracker
`AddStiffnessEnergy`	Creates a new StiffnessEnergyTracker
`AddTemperature`	Creates a new TemperatureTracker
`AddTopologyDensity`	Creates a new TopologyDensity
`AddTopologyElementalDensity`	Creates a new TopologyElementalDensity
`AddTotalEnergy`	Creates a new TotalEnergyTracker
`AddTotalMassAverageVelocity`	Creates a new TotalMassAverageVelocityTracker
`RenameBasedOnDefinition`	Run the RenameBasedOnDefinition action.
`GetChildren`	Gets the list of children, filtered by type.
`GetChildren`	Gets the list of children, filtered by type.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`Activate`	Activate the current object.
`CopyTo`	Copies all visible properties from this object to another.
`Duplicate`	Creates a copy of the current DataModelObject.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PropertyByName`	Get a property by its unique name.
`PropertyByAPIName`	Get a property by its API name.
`CreateParameter`	Creates a new parameter for a Property.
`GetParameter`	Gets the parameter corresponding to the given property.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.

Properties

`EnvironmentSelection`	Gets or Sets the EnvironmentSelection to an Analysis object.
`InternalObject`	Gets the internal object. For advanced usage only.
`DisplayPoints`	Gets or sets the DisplayPoints.
`IdentifyElementViolations`	Gets or sets the IdentifyElementViolations.
`NewtonRaphsonResiduals`	Gets or sets the NewtonRaphsonResiduals.
`ModeNumber`	Gets or sets the ModeNumber.
`StepNumber`	Gets or sets the StepNumber.
`UpdateInterval`	Gets or sets the UpdateInterval.
`Component`	Gets or sets the Component.
`LineColor`	Gets or sets the LineColor.
`DrawConnectionsAttachedTo`	Gets or sets the DrawConnectionsAttachedTo.
`Display`	Gets or sets the Display.
`DisplayType`	Gets or sets the DisplayType.
`LineThickness`	Gets or sets the LineThickness.
`SummaryType`	Gets or sets the SummaryType.
`SolutionOutput`	Gets or sets the SolutionOutput.
`StepSelectionMode`	Gets or sets the StepSelectionMode.
`VisibleOnResults`	Gets or sets the VisibleOnResults.
`ActivateVisibility`	Gets or sets the ActivateVisibility.
`ShowChargeResiduals`	Gets or sets the ShowChargeResiduals.
`ShowHeatResiduals`	Gets or sets the ShowHeatResiduals.
`ShowMomentResiduals`	Gets or sets the ShowMomentResiduals.
`DisplayFilterDuringSolve`	Gets or sets the DisplayFilterDuringSolve.
`ResponseConstraint`	Gets or sets the ResponseConstraint.
`DataModelObjectCategory`	Gets the current DataModelObject’s category.
`Children`	Gets the list of children.
`Comments`	Gets the list of associated comments.
`Figures`	Gets the list of associated figures.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`Properties`	Gets the list of properties for this object.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Property detail#

property SolutionInformation.EnvironmentSelection: System.Object | None: Gets or Sets the EnvironmentSelection to an Analysis object.

property SolutionInformation.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSSolutionInfoToolAuto | None: Gets the internal object. For advanced usage only.

property SolutionInformation.DisplayPoints: System.Double | None: Gets or sets the DisplayPoints.

property SolutionInformation.IdentifyElementViolations: System.Int32 | None: Gets or sets the IdentifyElementViolations.

property SolutionInformation.NewtonRaphsonResiduals: System.Int32 | None: Gets or sets the NewtonRaphsonResiduals.

property SolutionInformation.ModeNumber: System.Int32 | None: Gets or sets the ModeNumber.

property SolutionInformation.StepNumber: System.Int32 | None: Gets or sets the StepNumber.

property SolutionInformation.UpdateInterval: System.Double | None: Gets or sets the UpdateInterval.

property SolutionInformation.Component: Ansys.Mechanical.DataModel.Enums.OptimizationResponseConstraintComponentType | None: Gets or sets the Component.

property SolutionInformation.LineColor: Ansys.Mechanical.DataModel.Enums.FEConnectionLineColor | None: Gets or sets the LineColor.

property SolutionInformation.DrawConnectionsAttachedTo: Ansys.Mechanical.DataModel.Enums.NodeSelection | None: Gets or sets the DrawConnectionsAttachedTo.

property SolutionInformation.Display: Ansys.Mechanical.DataModel.Enums.FEConnectionDisplay | None: Gets or sets the Display.

property SolutionInformation.DisplayType: Ansys.Mechanical.DataModel.Enums.FEConnectionDisplayType | None: Gets or sets the DisplayType.

property SolutionInformation.LineThickness: Ansys.Mechanical.DataModel.Enums.FEConnectionLineThicknessType | None: Gets or sets the LineThickness.

property SolutionInformation.SummaryType: Ansys.Mechanical.DataModel.Enums.PFactorResultType | None: Gets or sets the SummaryType.

property SolutionInformation.SolutionOutput: Ansys.Mechanical.DataModel.Enums.SolutionOutputType | None: Gets or sets the SolutionOutput.

property SolutionInformation.StepSelectionMode: Ansys.Mechanical.DataModel.Enums.SeqSelectionMode | None: Gets or sets the StepSelectionMode.

property SolutionInformation.VisibleOnResults: System.Boolean | None: Gets or sets the VisibleOnResults.

property SolutionInformation.ActivateVisibility: System.Boolean | None: Gets or sets the ActivateVisibility.

property SolutionInformation.ShowChargeResiduals: System.Boolean | None: Gets or sets the ShowChargeResiduals.

property SolutionInformation.ShowHeatResiduals: System.Boolean | None: Gets or sets the ShowHeatResiduals.

property SolutionInformation.ShowMomentResiduals: System.Boolean | None: Gets or sets the ShowMomentResiduals.

property SolutionInformation.DisplayFilterDuringSolve: System.Boolean | None: Gets or sets the DisplayFilterDuringSolve.

property SolutionInformation.ResponseConstraint: Ansys.ACT.Automation.Mechanical.ResponseConstraint | None: Gets or sets the ResponseConstraint.

property SolutionInformation.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None: Gets the current DataModelObject’s category.

property SolutionInformation.Children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None: Gets the list of children.

property SolutionInformation.Comments: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Comment] | None: Gets the list of associated comments.

property SolutionInformation.Figures: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Figure] | None: Gets the list of associated figures.

property SolutionInformation.Images: System.Collections.Generic.IEnumerable[Ansys.ACT.Automation.Mechanical.Image] | None: Gets the list of associated images.

property SolutionInformation.InternalObject: System.Object | None: Gets the internal object. For advanced usage only.

property SolutionInformation.Properties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties for this object.

property SolutionInformation.VisibleProperties: System.Collections.Generic.IReadOnlyList[Ansys.ACT.Automation.Mechanical.Property] | None: Gets the list of properties that are visible for this object.

Method detail#

SolutionInformation.ImportResultTrackersFromFile(fileName: System.String) → System.Void: Import Result Trackers from File.

SolutionInformation.AddDeformationPlotTracker() → Ansys.ACT.Automation.Mechanical.Results.DeformationResults.TotalDeformation: Creates a new TotalDeformation Plot Tracker.

SolutionInformation.AddStressPlotTracker() → Ansys.ACT.Automation.Mechanical.Results.StressResults.EquivalentStress: Creates a new EquivalentStress Plot Tracker.

SolutionInformation.AddStrainPlotTracker() → Ansys.ACT.Automation.Mechanical.Results.StrainResults.EquivalentElasticStrainRST: Creates a new EquivalentElasticStrainRST Plot Tracker.

SolutionInformation.AddTemperaturePlotTracker() → Ansys.ACT.Automation.Mechanical.Results.ThermalResults.TemperatureResult: Creates a new TemperatureResult Plot Tracker.

SolutionInformation.EvaluateAllContactTrackers() → System.Void: Run the EvaluateAllContactTrackers action.

SolutionInformation.AddAddedMass() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.AddedMassTracker: Creates a new AddedMassTracker

SolutionInformation.AddArtificialEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ArtificialEnergyTracker: Creates a new ArtificialEnergyTracker

SolutionInformation.AddChattering() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactChatteringTracker: Creates a new ContactChatteringTracker

SolutionInformation.AddClosedPenetration() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactClosedPenetrationTracker: Creates a new ContactClosedPenetrationTracker

SolutionInformation.AddContactDepth() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactDepthTracker: Creates a new ContactDepthTracker

SolutionInformation.AddElasticSlip() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactElasticSlipTracker: Creates a new ContactElasticSlipTracker

SolutionInformation.AddContactEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactEnergyTracker: Creates a new ContactEnergyTracker

SolutionInformation.AddFluidPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactFluidPressureTracker: Creates a new ContactFluidPressureTracker

SolutionInformation.AddContactForce() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactForceTracker: Creates a new ContactForceTracker

SolutionInformation.AddFrictionalDissipationEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactFrictionalDissipationEnergyTracker: Creates a new ContactFrictionalDissipationEnergyTracker

SolutionInformation.AddFrictionalStress() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactFrictionalStressTracker: Creates a new ContactFrictionalStressTracker

SolutionInformation.AddGap() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactGapTracker: Creates a new ContactGapTracker

SolutionInformation.AddContactHeatFlux() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactHeatFluxTracker: Creates a new ContactHeatFluxTracker

SolutionInformation.AddContactingArea() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactingAreaTracker: Creates a new ContactingAreaTracker

SolutionInformation.AddMaximumDampingPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaximumDampingPressureTracker: Creates a new ContactMaximumDampingPressureTracker

SolutionInformation.AddMaximumGeometricSlidingDistance() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaximumGeometricSlidingDistanceTracker: Creates a new ContactMaximumGeometricSlidingDistanceTracker

SolutionInformation.AddContactMaximumNormalStiffness() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaximumNormalStiffnessTracker: Creates a new ContactMaximumNormalStiffnessTracker

SolutionInformation.AddMaximumTangentialStiffness() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaximumTangentialStiffnessTracker: Creates a new ContactMaximumTangentialStiffnessTracker

SolutionInformation.AddContactMaxTangentialFluidPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMaxTangentialFluidPressureTracker: Creates a new ContactMaxTangentialFluidPressureTracker

SolutionInformation.AddMinimumGeometricSlidingDistance() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMinimumGeometricSlidingDistanceTracker: Creates a new ContactMinimumGeometricSlidingDistanceTracker

SolutionInformation.AddContactMinimumNormalStiffness() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMinimumNormalStiffnessTracker: Creates a new ContactMinimumNormalStiffnessTracker

SolutionInformation.AddMinimumTangentialStiffness() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactMinimumTangentialStiffnessTracker: Creates a new ContactMinimumTangentialStiffnessTracker

SolutionInformation.AddNumberSticking() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactNumberStickingTracker: Creates a new ContactNumberStickingTracker

SolutionInformation.AddNumberWithLargePenetration() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactNumberWithLargePenetrationTracker: Creates a new ContactNumberWithLargePenetrationTracker

SolutionInformation.AddNumberWithTooMuchSliding() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactNumberWithTooMuchSlidingTracker: Creates a new ContactNumberWithTooMuchSlidingTracker

SolutionInformation.AddContactPairForceConvergenceNorm() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactPairForceConvergenceNormTracker: Creates a new ContactPairForceConvergenceNormTracker

SolutionInformation.AddPenetration() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactPenetrationTracker: Creates a new ContactPenetrationTracker

SolutionInformation.AddPossibleOverconstraint() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactPossibleOverconstraintTracker: Creates a new ContactPossibleOverconstraintTracker

SolutionInformation.AddContactPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactPressureTracker: Creates a new ContactPressureTracker

SolutionInformation.AddResultingPinball() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactResultingPinballTracker: Creates a new ContactResultingPinballTracker

SolutionInformation.AddSlidingDistance() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactSlidingDistanceTracker: Creates a new ContactSlidingDistanceTracker

SolutionInformation.AddSlidingIndication() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactSlidingIndicationTracker: Creates a new ContactSlidingIndicationTracker

SolutionInformation.AddStabilizationEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactStabilizationEnergyTracker: Creates a new ContactStabilizationEnergyTracker

SolutionInformation.AddStrainEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactStrainEnergyTracker: Creates a new ContactStrainEnergyTracker

SolutionInformation.AddTangentialDampingStress() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTangentialDampingStressTracker: Creates a new ContactTangentialDampingStressTracker

SolutionInformation.AddTotalForceFromContactPressureX() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromContactPressureXTracker: Creates a new ContactTotalForceFromContactPressureXTracker

SolutionInformation.AddTotalForceFromContactPressureY() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromContactPressureYTracker: Creates a new ContactTotalForceFromContactPressureYTracker

SolutionInformation.AddTotalForceFromContactPressureZ() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromContactPressureZTracker: Creates a new ContactTotalForceFromContactPressureZTracker

SolutionInformation.AddTotalForceFromTangentialStressX() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromTangentialStressXTracker: Creates a new ContactTotalForceFromTangentialStressXTracker

SolutionInformation.AddTotalForceFromTangentialStressY() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromTangentialStressYTracker: Creates a new ContactTotalForceFromTangentialStressYTracker

SolutionInformation.AddTotalForceFromTangentialStressZ() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactTotalForceFromTangentialStressZTracker: Creates a new ContactTotalForceFromTangentialStressZTracker

SolutionInformation.AddVolumeLossDueToWear() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ContactVolumeLossDueToWearTracker: Creates a new ContactVolumeLossDueToWearTracker

SolutionInformation.AddDampingEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DampingEnergyTracker: Creates a new DampingEnergyTracker

SolutionInformation.AddDensity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DensityTracker: Creates a new DensityTracker

SolutionInformation.AddDirectionalAcceleration() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DirectionalAccelerationTracker: Creates a new DirectionalAccelerationTracker

SolutionInformation.AddDirectionalDeformation() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DirectionalDeformationTracker: Creates a new DirectionalDeformationTracker

SolutionInformation.AddDirectionalVelocity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.DirectionalVelocityTracker: Creates a new DirectionalVelocityTracker

SolutionInformation.AddEffectiveStrain() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.EffectiveStrainTracker: Creates a new EffectiveStrainTracker

SolutionInformation.AddEffectiveStress() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.EffectiveStressTracker: Creates a new EffectiveStressTracker

SolutionInformation.AddErodedInternalEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ErodedInternalEnergyTracker: Creates a new ErodedInternalEnergyTracker

SolutionInformation.AddErodedKineticEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ErodedKineticEnergyTracker: Creates a new ErodedKineticEnergyTracker

SolutionInformation.AddExternalForce() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ExternalForceTracker: Creates a new ExternalForceTracker

SolutionInformation.AddForceReaction() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.ForceReactionTracker: Creates a new ForceReactionTracker

SolutionInformation.AddHourglassEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.HourglassEnergyTracker: Creates a new HourglassEnergyTracker

SolutionInformation.AddInternalEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.InternalEnergyTracker: Creates a new InternalEnergyTracker

SolutionInformation.AddKineticEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.KineticEnergyTracker: Creates a new KineticEnergyTracker

SolutionInformation.AddLatticeDensity() → Ansys.ACT.Automation.Mechanical.Results.LatticeDensity: Creates a new LatticeDensity

SolutionInformation.AddLatticeElementalDensity() → Ansys.ACT.Automation.Mechanical.Results.LatticeElementalDensity: Creates a new LatticeElementalDensity

SolutionInformation.AddLSDYNAGeneralTracker() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.LSDYNAGeneralTracker: Creates a new LSDYNAGeneralTracker

SolutionInformation.AddMomentReaction() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.MomentReactionTracker: Creates a new MomentReactionTracker

SolutionInformation.AddMomentum() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.MomentumTracker: Creates a new MomentumTracker

SolutionInformation.AddNonLinearStabilizationEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.NonLinearStabilizationEnergyTracker: Creates a new NonLinearStabilizationEnergyTracker

SolutionInformation.AddNumberContacting() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.NumberContactingTracker: Creates a new NumberContactingTracker

SolutionInformation.AddPlasticWork() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.PlasticWorkTracker: Creates a new PlasticWorkTracker

SolutionInformation.AddPosition() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.PositionTracker: Creates a new PositionTracker

SolutionInformation.AddPressure() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.PressureTracker: Creates a new PressureTracker

SolutionInformation.AddRigidBodyVelocity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.RigidBodyVelocityTracker: Creates a new RigidBodyVelocityTracker

SolutionInformation.AddSpringTrackerDampingForce() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.SpringDampingForceTracker: Creates a new SpringDampingForceTracker

SolutionInformation.AddSpringTrackerElasticForce() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.SpringElasticForceTracker: Creates a new SpringElasticForceTracker

SolutionInformation.AddSpringTrackerElongation() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.SpringElongationTracker: Creates a new SpringElongationTracker

SolutionInformation.AddSpringTrackerVelocity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.SpringVelocityTracker: Creates a new SpringVelocityTracker

SolutionInformation.AddStiffnessEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.StiffnessEnergyTracker: Creates a new StiffnessEnergyTracker

SolutionInformation.AddTemperature() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.TemperatureTracker: Creates a new TemperatureTracker

SolutionInformation.AddTopologyDensity() → Ansys.ACT.Automation.Mechanical.Results.TopologyDensity: Creates a new TopologyDensity

SolutionInformation.AddTopologyElementalDensity() → Ansys.ACT.Automation.Mechanical.Results.TopologyElementalDensity: Creates a new TopologyElementalDensity

SolutionInformation.AddTotalEnergy() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.TotalEnergyTracker: Creates a new TotalEnergyTracker

SolutionInformation.AddTotalMassAverageVelocity() → Ansys.ACT.Automation.Mechanical.Results.ResultTrackers.TotalMassAverageVelocityTracker: Creates a new TotalMassAverageVelocityTracker

SolutionInformation.RenameBasedOnDefinition() → System.Void: Run the RenameBasedOnDefinition action.

SolutionInformation.GetChildren(recurses: System.Boolean, children: System.Collections.Generic.IList[ChildrenType]) → System.Collections.Generic.IList[ChildrenType]: Gets the list of children, filtered by type.

SolutionInformation.GetChildren(category: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory, recurses: System.Boolean, children: System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → System.Collections.Generic.IList[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]: Gets the list of children, filtered by type.

SolutionInformation.AddComment() → Ansys.ACT.Automation.Mechanical.Comment: Creates a new child Comment.

SolutionInformation.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure: Creates a new child Figure.

SolutionInformation.AddImage(filePath: System.String) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

SolutionInformation.Activate() → System.Void: Activate the current object.

SolutionInformation.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → System.Void: Copies all visible properties from this object to another.

SolutionInformation.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject: Creates a copy of the current DataModelObject.

SolutionInformation.GroupAllSimilarChildren() → System.Void: Run the GroupAllSimilarChildren action.

SolutionInformation.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder: Run the GroupSimilarObjects action.

SolutionInformation.PropertyByName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property: Get a property by its unique name.

SolutionInformation.PropertyByAPIName(name: System.String) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

SolutionInformation.CreateParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Creates a new parameter for a Property.

SolutionInformation.GetParameter(propName: System.String) → Ansys.ACT.Interfaces.Mechanical.IParameter: Gets the parameter corresponding to the given property.

SolutionInformation.RemoveParameter(propName: System.String) → System.Void: Removes the parameter from the parameter set corresponding to the given property.