AMProcess

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.AdditiveManufacturing.AMProcess

Bases: object

Defines a AMProcess.

Overview

Methods

Activate	Activate the current object.
AddCartesianMesh	AddCartesianMesh method.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddGeneratedAMSupport	Creates a new GeneratedAMSupport
AddImage	Creates a new child Image.
AddPredefinedAMSupport	Creates a new PredefinedAMSupport
AddSTLAMSupport	Creates a new STLAMSupport
AddSupportGroup	Creates a new AMSupportGroup
CleanAMStrains	Run the CleanAMStrains action.
CopyTo	Copies all visible properties from this object to another.
CreateAMBondConnections	Run the CreateAMBondConnections action.
CreateBuildToBaseContact	Run the CreateBuildToBaseContact action.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
GenerateAMStrains	Run the GenerateAMStrains action.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GetSequence	Gets the support removal sequence for a given environment.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
HasAMStrains	Get the HasAMStrains property.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
ResetAllSequences	Resets the sequence for all analyses

Properties

BaseGeometry	Gets or sets the BaseGeometry.
BuildGeometry	Gets or sets the PartGeometry using the deprecated BuildGeometry method.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
DataModelObjectCategory	Gets the current DataModelObject's category.
ElementSize	Gets or sets the ElementSize.
Figures	Gets the list of associated figures.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
LengthUnits	Gets or sets the LengthUnits.
MeshUsingVoxelization	Gets or sets the MeshUsingVoxelization.
NonlinearEffects	Gets or sets the NonlinearEffects.
PartGeometry	Gets or sets the PartGeometry.
Properties	Gets the list of properties for this object.
SubsampleRate	Gets or sets the SubsampleRate.
VisibleProperties	Gets the list of properties that are visible for this object.
WallThickness	Gets or sets the WallThickness.
ZLocationAtTopOfBase	Gets the ZLocationAtTopOfBase.

Property detail

property AMProcess.BaseGeometry: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the BaseGeometry.

property AMProcess.BuildGeometry: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the PartGeometry using the deprecated BuildGeometry method.

property AMProcess.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property AMProcess.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property AMProcess.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property AMProcess.ElementSize: Ansys.Core.Units.Quantity | None

Gets or sets the ElementSize.

property AMProcess.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property AMProcess.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property AMProcess.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSAMProcessSimulationAuto | None

Gets the internal object. For advanced usage only.

property AMProcess.LengthUnits: Ansys.Mechanical.DataModel.Enums.WBUnitSystemType | None

Gets or sets the LengthUnits.

property AMProcess.MeshUsingVoxelization: bool | None

Gets or sets the MeshUsingVoxelization.

property AMProcess.NonlinearEffects: bool | None

Gets or sets the NonlinearEffects.

property AMProcess.PartGeometry: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the PartGeometry.

property AMProcess.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property AMProcess.SubsampleRate: int | None

Gets or sets the SubsampleRate.

property AMProcess.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property AMProcess.WallThickness: Ansys.Core.Units.Quantity | None

Gets or sets the WallThickness.

property AMProcess.ZLocationAtTopOfBase: Ansys.Core.Units.Quantity | None

Gets the ZLocationAtTopOfBase.

Method detail

AMProcess.Activate() → None

Activate the current object.

AMProcess.AddCartesianMesh() → Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod

AddCartesianMesh method.

AMProcess.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

AMProcess.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

AMProcess.AddGeneratedAMSupport() → Ansys.ACT.Automation.Mechanical.AdditiveManufacturing.GeneratedAMSupport

Creates a new GeneratedAMSupport

AMProcess.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

AMProcess.AddPredefinedAMSupport() → Ansys.ACT.Automation.Mechanical.AdditiveManufacturing.PredefinedAMSupport

Creates a new PredefinedAMSupport

AMProcess.AddSTLAMSupport() → Ansys.ACT.Automation.Mechanical.AdditiveManufacturing.STLAMSupport

Creates a new STLAMSupport

AMProcess.AddSupportGroup() → Ansys.ACT.Automation.Mechanical.AdditiveManufacturing.AMSupportGroup

Creates a new AMSupportGroup

AMProcess.CleanAMStrains() → None

Run the CleanAMStrains action.

AMProcess.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

AMProcess.CreateAMBondConnections() → None

Run the CreateAMBondConnections action.

AMProcess.CreateBuildToBaseContact() → Ansys.ACT.Automation.Mechanical.Connections.ContactRegion

Run the CreateBuildToBaseContact action.

AMProcess.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

AMProcess.Delete() → None

Run the Delete action.

AMProcess.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

AMProcess.GenerateAMStrains() → None

Run the GenerateAMStrains action.

AMProcess.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

AMProcess.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

AMProcess.GetSequence(analysis: Ansys.ACT.Automation.Mechanical.Analysis) → Ansys.ACT.Automation.Mechanical.AdditiveManufacturing.AMSupportRemovalSequence

Gets the support removal sequence for a given environment.

AMProcess.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

AMProcess.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

AMProcess.HasAMStrains() → bool

Get the HasAMStrains property.

AMProcess.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

AMProcess.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

AMProcess.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

AMProcess.ResetAllSequences() → None

Resets the sequence for all analyses