ModelImport

class ansys.mechanical.stubs.v241.Ansys.ACT.Automation.Mechanical.ModelImport

Bases: object

Defines a ModelImport.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Duplicate	Creates a copy of the current DataModelObject.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.

Properties

AnalysisTypeDimensionSetting	Gets or sets the AnalysisTypeDimensionSetting.
BodyGroupByAnsysElmTypeNumber	Gets or sets the BodyGroupByAnsysElmTypeNumber.
BodyGroupByMaterialNumber	Gets or sets the BodyGroupByMaterialNumber.
BodyGroupByThickness	Gets or sets the BodyGroupByThickness.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
CreateGeometry	Gets or sets the CreateGeometry.
CreateGeometryEdgeComponents	Gets or sets the CreateGeometryEdgeComponents.
CreateGeometryFaceComponents	Gets or sets the CreateGeometryFaceComponents.
CreateGeometryVertexComponent	Gets or sets the CreateGeometryVertexComponent.
DataModelObjectCategory	Gets the current DataModelObject's category.
ElementComponentKey	Gets or sets the ElementComponentKey.
ElementOffset	Gets or sets the ElementOffset.
FaceComponentKey	Gets or sets the FaceComponentKey.
Figures	Gets the list of associated figures.
GeometryComponentKey	Gets or sets the GeometryComponentKey.
Images	Gets the list of associated images.
ImportMaterials	Gets or sets the ImportMaterials.
InternalObject	Gets the internal object. For advanced usage only.
ModelImportSourceFilePath	Gets or sets the ModelImportSourceFilePath.
NodalComponentKey	Gets or sets the NodalComponentKey.
NodeAndElementRenumberingMethod	Gets or sets the NodeAndElementRenumberingMethod.
NodeOffset	Gets or sets the NodeOffset.
ProcessElementComponents	Gets or sets the ProcessElementComponents.
ProcessFaceComponents	Gets or sets the ProcessFaceComponents.
ProcessLineBodies	Gets or sets the ProcessLineBodies.
ProcessMesh200Elms	Gets or sets the ProcessMesh200Elms.
ProcessModelData	Gets or sets the ProcessModelData.
ProcessNodalComponents	Gets or sets the ProcessNodalComponents.
ProcessValidBlockedCDBFile	Gets or sets the ProcessValidBlockedCDBFile.
Properties	Gets the list of properties for this object.
ToleranceAngle	Gets or sets the ToleranceAngle.
UnitSystemTypeForImport	Gets or sets the UnitSystemTypeForImport.
VertexInsertionAngle	Gets or sets the VertexInsertionAngle.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property ModelImport.AnalysisTypeDimensionSetting: Ansys.Mechanical.DataModel.Enums.AnalysisTypeDimensionEnum | None

Gets or sets the AnalysisTypeDimensionSetting.

property ModelImport.BodyGroupByAnsysElmTypeNumber: bool | None

Gets or sets the BodyGroupByAnsysElmTypeNumber.

property ModelImport.BodyGroupByMaterialNumber: bool | None

Gets or sets the BodyGroupByMaterialNumber.

property ModelImport.BodyGroupByThickness: bool | None

Gets or sets the BodyGroupByThickness.

property ModelImport.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property ModelImport.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property ModelImport.CreateGeometry: bool | None

Gets or sets the CreateGeometry.

property ModelImport.CreateGeometryEdgeComponents: bool | None

Gets or sets the CreateGeometryEdgeComponents.

property ModelImport.CreateGeometryFaceComponents: bool | None

Gets or sets the CreateGeometryFaceComponents.

property ModelImport.CreateGeometryVertexComponent: bool | None

Gets or sets the CreateGeometryVertexComponent.

property ModelImport.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property ModelImport.ElementComponentKey: str | None

Gets or sets the ElementComponentKey.

property ModelImport.ElementOffset: int | None

Gets or sets the ElementOffset.

property ModelImport.FaceComponentKey: str | None

Gets or sets the FaceComponentKey.

property ModelImport.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property ModelImport.GeometryComponentKey: str | None

Gets or sets the GeometryComponentKey.

property ModelImport.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property ModelImport.ImportMaterials: bool | None

Gets or sets the ImportMaterials.

property ModelImport.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSModelImportAuto | None

Gets the internal object. For advanced usage only.

property ModelImport.ModelImportSourceFilePath: str | None

Gets or sets the ModelImportSourceFilePath.

property ModelImport.NodalComponentKey: str | None

Gets or sets the NodalComponentKey.

property ModelImport.NodeAndElementRenumberingMethod: Ansys.Mechanical.DataModel.Enums.NodeAndElementRenumberingMethodType | None

Gets or sets the NodeAndElementRenumberingMethod.

property ModelImport.NodeOffset: int | None

Gets or sets the NodeOffset.

property ModelImport.ProcessElementComponents: bool | None

Gets or sets the ProcessElementComponents.

property ModelImport.ProcessFaceComponents: bool | None

Gets or sets the ProcessFaceComponents.

property ModelImport.ProcessLineBodies: bool | None

Gets or sets the ProcessLineBodies.

property ModelImport.ProcessMesh200Elms: bool | None

Gets or sets the ProcessMesh200Elms.

property ModelImport.ProcessModelData: bool | None

Gets or sets the ProcessModelData.

property ModelImport.ProcessNodalComponents: bool | None

Gets or sets the ProcessNodalComponents.

property ModelImport.ProcessValidBlockedCDBFile: bool | None

Gets or sets the ProcessValidBlockedCDBFile.

property ModelImport.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property ModelImport.ToleranceAngle: Ansys.Core.Units.Quantity | None

Gets or sets the ToleranceAngle.

property ModelImport.UnitSystemTypeForImport: Ansys.Mechanical.DataModel.Enums.ModelImportUnitSystemType | None

Gets or sets the UnitSystemTypeForImport.

property ModelImport.VertexInsertionAngle: Ansys.Core.Units.Quantity | None

Gets or sets the VertexInsertionAngle.

property ModelImport.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

ModelImport.Activate() → None

Activate the current object.

ModelImport.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

ModelImport.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

ModelImport.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

ModelImport.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

ModelImport.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

ModelImport.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

ModelImport.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

ModelImport.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

ModelImport.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

ModelImport.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

ModelImport.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

ModelImport.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

ModelImport.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.