ReinforcingPly

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.ReinforcingPly(internalObject: Any)

Bases: object

This class provides access to the reinforcing ply data that has been imported from an external upstream system of Ansys Composite Prep.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
CopyTo	Copies all visible properties from this object to another.
CreateObjRef	CreateObjRef method.
CreateParameter	Creates a new parameter for a Property.
Duplicate	Creates a copy of the current DataModelObject.
Equals	Equals method.
GetAPIName	Property name bound to dispId.
GetAllProperties	GetAllProperties method.
GetChildren	Gets the list of children, filtered by type.
GetDetailsView	GetDetailsView method.
GetEnumName
GetHashCode	GetHashCode method.
GetIconFile	GetIconFile method.
GetLifetimeService	GetLifetimeService method.
GetObjectData	GetObjectData method.
GetParameter	Gets the parameter corresponding to the given property.
GetPath	GetPath method.
GetPropertyName	GetPropertyName method.
GetPropertyValue	GetPropertyValue method.
GetType	GetType method.
GetVisibleProperties	GetVisibleProperties method.
GetVisiblePropertyNames	GetVisiblePropertyNames method.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
InitializeLifetimeService	InitializeLifetimeService method.
IsPropertyEditable	IsPropertyEditable method.
IsPropertyVisible	IsPropertyVisible method.
PropertyByAPIName	Get a property by its API name.
PropertyById	PropertyById method.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
ToString	ToString method.

Properties

Angle	Gets the Angle of the reinforcing ply.
AttachedRefs	AttachedRefs property.
BaseMaterialHandling	Gets the BaseMaterialHandling of the reinforcing ply. This specifies whether the base-element material
Children	Gets the list of children.
ClsId	ClsId property.
Comments	Gets the list of associated comments.
DataModelObjectCategory	Gets the current DataModelObject's category.
Figures	Gets the list of associated figures.
GlobalID	Gets the GlobalID assigned to the base MESH200 elements for the corresponding Reinforcing Ply. This ID is propagated to the reinforcing elements generated by the REINF command and can be used during post-processing to select those reinforcing elements.
GroupingFolder	GroupingFolder property.
IDInSource	Gets the IDInSource as defined in the upstream ACP system.
IconName	IconName property.
Images	Gets the list of associated images.
ImportableObjectSourceId	ImportableObjectSourceId property.
InternalObject	Gets the internal object. For advanced usage only.
Material	Gets the Material of the reinforcing ply.
Name	Name property.
NameInSource	Gets the NameInSource as defined in the upstream ACP system.
NumberOfElements	Gets the NumberOfElements of the reinforcing ply.
NumberOfSections	Gets the NumberOfSections of the reinforcing ply.
ObjectId	ObjectId property.
ObjectState	ObjectState property.
ObjectTags	ObjectTags property.
Parent	Parent property.
Properties	Gets the list of properties for this object.
ReadOnly	Gets or sets the ReadOnly.
ReinforcingBehavior	Gets the ReinforcingBehavior of the reinforcing ply.
ReinforcingType	Gets the ReinforcingType of the reinforcing ply.
State	State property.
StressState	Gets the StressState of the reinforcing ply.
Thickness	Gets the Thickness of the reinforcing ply.
TransferableObjectId	TransferableObjectId property.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property ReinforcingPly.Angle: Ansys.Core.Units.Quantity | None

Gets the Angle of the reinforcing ply.

property ReinforcingPly.AttachedRefs: List[int] | None

AttachedRefs property.

property ReinforcingPly.BaseMaterialHandling: Ansys.Mechanical.DataModel.Enums.ReinforcingBaseMaterialHandling | None

Gets the BaseMaterialHandling of the reinforcing ply. This specifies whether the base-element material

in the space occupied by the reinforcing fibers should be retained or removed.

property ReinforcingPly.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property ReinforcingPly.ClsId: int | None

ClsId property.

property ReinforcingPly.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property ReinforcingPly.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property ReinforcingPly.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property ReinforcingPly.GlobalID: int | None

Gets the GlobalID assigned to the base MESH200 elements for the corresponding Reinforcing Ply. This ID is propagated to the reinforcing elements generated by the REINF command and can be used during post-processing to select those reinforcing elements.

property ReinforcingPly.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

GroupingFolder property.

property ReinforcingPly.IDInSource: str | None

Gets the IDInSource as defined in the upstream ACP system.

property ReinforcingPly.IconName: str | None

IconName property.

property ReinforcingPly.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property ReinforcingPly.ImportableObjectSourceId: str | None

ImportableObjectSourceId property.

property ReinforcingPly.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSReinforcingPlyAuto | None

Gets the internal object. For advanced usage only.

property ReinforcingPly.Material: str | None

Gets the Material of the reinforcing ply.

property ReinforcingPly.Name: str | None

Name property.

property ReinforcingPly.NameInSource: str | None

Gets the NameInSource as defined in the upstream ACP system.

property ReinforcingPly.NumberOfElements: int | None

Gets the NumberOfElements of the reinforcing ply.

property ReinforcingPly.NumberOfSections: int | None

Gets the NumberOfSections of the reinforcing ply.

property ReinforcingPly.ObjectId: int | None

ObjectId property.

property ReinforcingPly.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None

ObjectState property.

property ReinforcingPly.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None

ObjectTags property.

property ReinforcingPly.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

Parent property.

property ReinforcingPly.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property ReinforcingPly.ReadOnly: bool | None

Gets or sets the ReadOnly.

property ReinforcingPly.ReinforcingBehavior: Ansys.Mechanical.DataModel.Enums.ReinforcingBehavior | None

Gets the ReinforcingBehavior of the reinforcing ply.

property ReinforcingPly.ReinforcingType: Ansys.Mechanical.DataModel.Enums.ReinforcingType | None

Gets the ReinforcingType of the reinforcing ply.

property ReinforcingPly.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None

State property.

property ReinforcingPly.StressState: Ansys.Mechanical.DataModel.Enums.ReinforcingStressState | None

Gets the StressState of the reinforcing ply.

property ReinforcingPly.Thickness: Ansys.Core.Units.Quantity | None

Gets the Thickness of the reinforcing ply.

property ReinforcingPly.TransferableObjectId: str | None

TransferableObjectId property.

property ReinforcingPly.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

ReinforcingPly.Activate() → None

Activate the current object.

ReinforcingPly.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

ReinforcingPly.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

ReinforcingPly.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

ReinforcingPly.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

ReinforcingPly.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef

CreateObjRef method.

ReinforcingPly.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

ReinforcingPly.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

ReinforcingPly.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool

Equals method.

ReinforcingPly.GetAPIName(dispId: int) → str

Property name bound to dispId.

ReinforcingPly.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]

GetAllProperties method.

ReinforcingPly.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

ReinforcingPly.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData

GetDetailsView method.

ReinforcingPly.GetEnumName(enumType: type, value: int, dispId: int) → str

ReinforcingPly.GetHashCode() → int

GetHashCode method.

ReinforcingPly.GetIconFile() → System.Byte

GetIconFile method.

ReinforcingPly.GetLifetimeService() → Any

GetLifetimeService method.

ReinforcingPly.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None

GetObjectData method.

ReinforcingPly.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

ReinforcingPly.GetPath() → str

GetPath method.

ReinforcingPly.GetPropertyName(dispId: int) → str

GetPropertyName method.

ReinforcingPly.GetPropertyValue(name: str) → Any

GetPropertyValue method.

ReinforcingPly.GetType() → type

GetType method.

ReinforcingPly.GetVisibleProperties() → List[System.Reflection.PropertyInfo]

GetVisibleProperties method.

ReinforcingPly.GetVisiblePropertyNames() → List[str]

GetVisiblePropertyNames method.

ReinforcingPly.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

ReinforcingPly.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

ReinforcingPly.InitializeLifetimeService() → Any

InitializeLifetimeService method.

ReinforcingPly.IsPropertyEditable(dispId: int) → bool

IsPropertyEditable method.

ReinforcingPly.IsPropertyVisible(dispId: int) → bool

IsPropertyVisible method.

ReinforcingPly.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

ReinforcingPly.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property

PropertyById method.

ReinforcingPly.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

ReinforcingPly.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

ReinforcingPly.ToString() → str

ToString method.