Mesh

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.MeshControls.Mesh(internalObject: Any)

Bases: object

Defines a Mesh.

Overview

Methods

Activate	Activate the current object.
ActivateAllSolidSurfaceWorksheetRows	ActivateAllSolidSurfaceWorksheetRows method.
ActivateAllSurfaceWorksheetRows	ActivateAllSurfaceWorksheetRows method.
ActivateAllVolumeWorksheetRows	ActivateAllVolumeWorksheetRows method.
AddAutomaticMethod	Creates a new AutomaticMethod
AddComment	Creates a new child Comment.
AddConnect	Creates a new Connect Control
AddContactMatchGroup	Add a new AddContactMatchGroup.
AddContactSizing	Creates a new ContactSizing
AddDeviation	Creates a new SagControl
AddDirectMorph	Add a new DirectMorph.
AddFaceMeshing	Creates a new FaceMeshing
AddFeatureSuppress	Creates a new FeatureSuppress
AddFigure	Creates a new child Figure.
AddGasket	Adds a Gasket Object under Mesh
AddGeometryFidelity	Creates a new GeometryFidelity
AddImage	Creates a new child Image.
AddInflation	Creates a new Inflation
AddManualMeshConnection	Add a new ManualMeshConnection
AddMatchControl	Creates a new MatchControl
AddMeshConnectionGroup	Add a new MeshConnectionGroup.
AddMeshCopy	Creates a new MeshCopy
AddMeshLayers	Adds Mesh Layers when contour enabled in Mesh Quality Workhseet mode.
AddNodeMerge	Add a new NodeMerge.
AddNodeMergeGroup	Add a new NodeMergeGroup.
AddPinch	Creates a new Pinch
AddPullExtrude	Add a new Pull (Extrude).
AddPullRevolve	Add a new Pull (Revolve).
AddPullSurfaceCoating	Add a new Pull (Surface Coating)).
AddRefinement	Creates a new Refinement
AddRepairTopology	Creates a new RepairTopology
AddSizing	Creates a new Sizing
AddSmallestEdgesToSelection	AddSmallestEdgesToSelection method.
AddTopologySuppressControl	Creates a new TopologySuppressControl
AddWasher	Creates a new SagControl
AddWeld	Creates a new WeldControl
CleanPartOrBody	Clear generated data for parts and/or bodies provided.
ClearGeneratedData	Run the ClearGeneratedData action.
ColorByMeshingEngine	ColorByMeshingEngine method.
ComputeMeshQualityMetrics	ComputeMeshQualityMetrics method.
ConvertLayeredTetrahedronToSlicerWorkflow	Convert Layered Tetrahedron method to Slicer workflow.
ConvertToWorkflow	ConvertToWorkflow method.
CopyTo	Copies all visible properties from this object to another.
CreateHistogram	CreateHistogram method.
CreateMQSolidSurfaceElementsNamedSelection	Create Mesh Quality SolidSurface Element Name Selection
CreateMQSurfaceElementsNamedSelection	Create Mesh Quality Surface Element Named Selection
CreateMQVolumeElementsNamedSelection	Create Mesh Quality Volume Element Name Selection
CreateObjRef	CreateObjRef method.
CreateParameter	Creates a new parameter for a Property.
CreatePinchControls	Run the CreatePinchControls action.
DeactivateAllSolidSurfaceWorksheetRows	DeactivateAllSolidSurfaceWorksheetRows method.
DeactivateAllSurfaceWorksheetRows	DeactivateAllSurfaceWorksheetRows method.
DeactivateAllVolumeWorksheetRows	DeactivateAllVolumeWorksheetRows method.
Duplicate	Creates a copy of the current DataModelObject.
Equals	Equals method.
ExportWeldDefinitionFile	Export the weld definition file to the specified location.
GenerateMesh	Run the GenerateMesh action.
GenerateMeshOnBodies	GenerateMeshOnBodies method.
GetAPIName	Property name bound to dispId.
GetActiveSolidSurfaceMeshQuality	Get Active Mesh Quality
GetActiveSurfaceMeshQuality	Get Active User Mesh Quality
GetActiveUnits	GetActiveUnits method.
GetActiveVolumeMeshQuality	Get Active Mesh Quality
GetAdvancedMeshSizingDefaults	Gets the Advanced mesh sizing defaults type. An exception is thrown if MeshSizing is not set to Advanced.
GetAllProperties	GetAllProperties method.
GetCalculatedMaxFaceSize	GetCalculatedMaxFaceSize method.
GetChildren	Gets the list of children, filtered by type.
GetDetailsView	GetDetailsView method.
GetDisplayStyle	GetDisplayStyle method.
GetEnumName
GetHashCode	GetHashCode method.
GetIconFile	GetIconFile method.
GetIndexFromSolidSurfaceMeshMetric	Get index from SolidSurface mesh quality worksheet from given mesh metric type.
GetIndexFromSurfaceMeshMetric	Get Index of shell mesh metric vector based on mesh metric
GetIndexFromVolumeMeshMetric	Get index from solid mesh quality worksheet from given mesh metric type.
GetIsShellTargetMetric	Get Shell Target Metric
GetIsSolidSurfaceTargetMetric	Get SolidSurface Target Metric
GetIsSolidTargetMetric	Get Solid Target Metric
GetLegendStyle	GetLegendStyle method.
GetLifetimeService	GetLifetimeService method.
GetMeshMetricOptions	GetMeshMetricOptions method.
GetMeshMetricQuantityName	GetMeshMetricQuantityName method.
GetMeshQualityAdvancedView	GetMeshQualityAdvancedView method.
GetMeshQualityTabIndex	GetMeshQualityTabIndex method.
GetMeshSizing	Gets the meshing sizing type. Default: Medium.
GetObjectData	GetObjectData method.
GetParameter	Gets the parameter corresponding to the given property.
GetPath	GetPath method.
GetPropertyName	GetPropertyName method.
GetPropertyValue	GetPropertyValue method.
GetSheetQuantityTypeString	Get quantity type of sheet metric from mesh metric type
GetSolidMeshQualityState	Get the state of solid mesh quality worksheet tab
GetSolidSurfaceMeshMetrics	GetSolidSurfaceMeshMetrics method.
GetSolidSurfaceMeshQualityAverageMetricValue	Get Mesh Quality Average Metric Value
GetSolidSurfaceMeshQualityCountFailed	Get Mesh Quality Count Failed
GetSolidSurfaceMeshQualityDisplayMetric	Get SolidSurface Mesh Quality Metric
GetSolidSurfaceMeshQualityErrorLimit	Get Mesh Quality Error Limit
GetSolidSurfaceMeshQualityErrorLimitIsDefault	Get SolidSurface Mesh Quality Worksheet Error Limit is Default
GetSolidSurfaceMeshQualityName	Get Mesh Quality Name
GetSolidSurfaceMeshQualityPercentageFailed	Get Mesh Quality Percentage Failed
GetSolidSurfaceMeshQualityState	Get the state of solid surface mesh quality worksheet tab
GetSolidSurfaceMeshQualityWarningCountFailed	Get Mesh Quality Warning Count Failed
GetSolidSurfaceMeshQualityWarningLimit	Get Mesh Quality Warning Limit
GetSolidSurfaceMeshQualityWarningLimitIsDefault	Get SolidSurface Mesh Quality Worksheet Warning Limit is Default
GetSolidSurfaceMeshQualityWarningPercentageFailed	Get Mesh Quality Warning Percentage Failed
GetSolidSurfaceMeshQualityWorstMetricBackgroundColor	Get Mesh Quality Worst Metric BackgroundColor
GetSolidSurfaceMeshQualityWorstMetricTooltip	Get Mesh Quality Worst Metric Tooltip
GetSolidSurfaceMeshQualityWorstMetricValue	Get Mesh Quality Worst Metric Value
GetSolidSurfaceQuantityTypeString	Get Quantity type from SolidSurface mesh metric type
GetSuppressibleTopology	Get all topologically suppressible entities of the specified type.
GetSurfaceMeshMetrics	GetSurfaceMeshMetrics method.
GetSurfaceMeshQualityAverageMetricValue	Get Mesh Quality Average Metric Value
GetSurfaceMeshQualityCountFailed	Get Mesh Quality Count Failed
GetSurfaceMeshQualityDisplayMetric	Get Surface Mesh Quality Metric
GetSurfaceMeshQualityErrorLimit	Get User Mesh Quality Error Limit
GetSurfaceMeshQualityErrorLimitIsDefault	Get Mesh Quality Error Limit is default
GetSurfaceMeshQualityName	Get Mesh Quality Name
GetSurfaceMeshQualityPercentageFailed	Get Mesh Quality Percentage Failed
GetSurfaceMeshQualityState	Get the state of surface mesh quality worksheet tab
GetSurfaceMeshQualityWarningCountFailed	Get Mesh Quality Warning Count Failed
GetSurfaceMeshQualityWarningLimit	Get User Mesh Quality Warning Limit
GetSurfaceMeshQualityWarningLimitIsDefault	Get Mesh Quality Warning Limit is default
GetSurfaceMeshQualityWarningPercentageFailed	Get Mesh Quality Warning Percentage Failed
GetSurfaceMeshQualityWorstMetricBackgroundColor	Get Mesh Quality Worst Metric BackgroundColor
GetSurfaceMeshQualityWorstMetricTooltip	Get Mesh Quality Worst Metric Tooltip
GetSurfaceMeshQualityWorstMetricValue	Get Mesh Quality Worst Metric Value
GetType	GetType method.
GetVisibleProperties	GetVisibleProperties method.
GetVisiblePropertyNames	GetVisiblePropertyNames method.
GetVolumeMeshMetrics	GetVolumeMeshMetrics method.
GetVolumeMeshQualityAverageMetricValue	Get Mesh Quality Average Metric Value
GetVolumeMeshQualityCountFailed	Get Mesh Quality Count Failed
GetVolumeMeshQualityDisplayMetric	Get Volume Mesh Quality Metric
GetVolumeMeshQualityErrorLimit	Get Mesh Quality Error Limit
GetVolumeMeshQualityErrorLimitIsDefault	Get Volume Mesh Quality Worksheet Error Limit is Default
GetVolumeMeshQualityName	Get Mesh Quality Name
GetVolumeMeshQualityPercentageFailed	Get Mesh Quality Percentage Failed
GetVolumeMeshQualityWarningCountFailed	Get Mesh Quality Warning Count Failed
GetVolumeMeshQualityWarningLimit	Get Mesh Quality Warning Limit
GetVolumeMeshQualityWarningLimitIsDefault	Get Volume Mesh Quality Worksheet Warning Limit is Default
GetVolumeMeshQualityWarningPercentageFailed	Get Mesh Quality Warning Percentage Failed
GetVolumeMeshQualityWorstMetricBackgroundColor	Get Mesh Quality Worst Metric BackgroundColor
GetVolumeMeshQualityWorstMetricTooltip	Get Mesh Quality Worst Metric Tooltip
GetVolumeMeshQualityWorstMetricValue	Get Mesh Quality Worst Metric Value
GetVolumeQuantityTypeString	Get Quantity type from solid mesh metric type
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
HasSheets	HasSheets method.
HasSolids	HasSolids method.
InitializeLifetimeService	InitializeLifetimeService method.
IsDegree	IsDegree method.
IsMeshMetricVisible	IsMeshMetricVisible method.
IsPropertyEditable	IsPropertyEditable method.
IsPropertyVisible	IsPropertyVisible method.
LoadMQWorksheetFile	LoadMQWorksheetFile method.
OpenTroubleShootDoc	OpenTroubleShootDoc method.
PinchControlGeomtry	Set the geometry type for the Pinch Control.
PreviewAllQuadLayers	Preview quad layers on all Quad Layer controls of the Mesh.
PreviewGeometryOnWeld	Preview geometry on one weld control provided.
PreviewGeometryOnWeldWorksheet	PreviewGeometryOnWeldWorksheet method.
PreviewGeometryOnWelds	PreviewGeometryOnWelds method.
PreviewInflation	Run the PreviewInflation action.
PreviewMeshOnAllWelds	Preview model mesh on all weld controls of the Mesh.
PreviewMeshOnWeld	Preview model mesh on one weld control provided.
PreviewMeshOnWeldCurve	Preview model mesh on a given single weld curve.
PreviewMeshOnWeldWorksheet	PreviewMeshOnWeldWorksheet method.
PreviewMeshOnWelds	PreviewMeshOnWelds method.
PreviewQuadLayers	PreviewQuadLayers method.
PreviewSurfaceMesh	Run the PreviewSurfaceMesh action.
PreviewWelds	Preview Welds.
PrimeMeshFileHelper	PrimeMeshFileHelper
PropertyByAPIName	Get a property by its API name.
PropertyById	PropertyById method.
PropertyByName	Get a property by its unique name.
RefreshMeshQualityGridInfo	RefreshMeshQualityGridInfo method.
RemoveMeshLayers	Removes Mesh Layers when contour enabled in Mesh Quality Workhseet mode.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
ResetMeshQualityMetrics	ResetMeshQualityMetrics method.
RunStackerDiagnostics	Find stackable bodies in a given direction
RunStackerDiagnosticsOnAllFindX	Find stackable bodies in the Global X direction
RunStackerDiagnosticsOnAllFindY	/// Find stackable bodies in the Global Y direction
RunStackerDiagnosticsOnAllFindZ	/// Find stackable bodies in the Global Z direction
SaveBodiesToXMLHelper	SaveMeshReportHelper
SaveMQWorksheetFile	SaveMQWorksheetFile method.
SaveMeshReportForPartHelper	SaveMeshReportForPartHelper
SaveMeshReportHelper	SaveMeshReportHelper
SaveMeshToFileHelper	SaveMeshToFileHelper
SetActiveSolidSurfaceMeshQuality	Set Active Mesh Quality
SetActiveSurfaceMeshQuality	Set Active Mesh Quality
SetActiveVolumeMeshQuality	Set Active Mesh Quality
SetAdvancedMeshSizingDefaults	Sets the Advanced mesh sizing defaults type. This also updates some advanced settings to
SetMeshMetricOptions	SetMeshMetricOptions method.
SetMeshQualityAdvancedView	SetMeshQualityAdvancedView method.
SetMeshQualityTabIndex	SetMeshQualityTabIndex method.
SetMeshSizing	Sets the meshing sizing type. This also updates some basic settings to pre-defined
SetMeshWorksheetActive	SetMeshWorksheetActive method.
SetSolidMeshMetricLimits	SetSolidMeshMetricLimits method.
SetSolidSurfaceMeshMetricLimits	SetSolidSurfaceMeshMetricLimits method.
SetSolidSurfaceMeshQualityErrorLimit	Set Mesh Quality Error Limit
SetSolidSurfaceMeshQualityWarningLimit	Set Mesh Quality Warning Limit
SetSurfaceMeshMetricLimits	SetSurfaceMeshMetricLimits method.
SetSurfaceMeshQualityErrorLimit	Set Mesh Quality Error Level
SetSurfaceMeshQualityWarningLimit	Set Mesh Quality Warning Limit
SetVolumeMeshQualityErrorLimit	Set Mesh Quality Error Limit
SetVolumeMeshQualityWarningLimit	Set Mesh Quality Warning Limit
ShowAxisymmetricBodies	Show Axisymmetric bodies.
ShowFeatureSuppressibleFaces	Run the ShowFeatureSuppressibleFaces action.
ShowMappableBodies	Run the ShowMappableBodies action.
ShowOverlappingFaces	Run the ShowOverlappingFaces action.
ShowProblematicBodies	ShowProblematicBodies method.
ShowSuppressibleTopology	Select all edges/vertices that are topologically suppressible.
ShowSweepableBodies	Run the ShowSweepableBodies action.
ShowUnconnectedFacesNearEdges	Run the ShowUnconnectedFreeEdges action.
ToString	ToString method.
ToggleLegend	ToggleLegend method.
Update	Run the Update action.
ValidateMeshQualityMetrics	ValidateMeshQualityMetrics method.

Properties

AspectRatio	Gets or sets the AspectRatio.
AttachedRefs	AttachedRefs property.
AutoMapFillets	Gets or sets the Auto-Map Fillets in Mesh. Auto-Map Fillets enables the mesh generator to detect and map fillets within the limits specified by AutoMapFilletsMinimumRadius and AutoMapFilletsMaximumRadius. Default: False.
AutoMapFilletsMaximumRadius	Gets or sets the Maximum Radius for Auto-Map Fillets. Default: 5 * Element Size.
AutoMapFilletsMinimumRadius	Gets or sets the Minimum Radius for Auto-Map Fillets. Default: 0.5 * Element Size.
AutomaticMeshBasedDefeaturing	Gets or sets the AutomaticMeshBasedDefeaturing.
Average	Gets the Average.
Beam3	Gets the Beam3.
Beam4	Gets the Beam4.
BeamElements	Gets the BeamElements.
CaptureCurvature	Gets or sets the CaptureCurvature.
CaptureProximity	Gets or sets the CaptureProximity.
CheckMeshQuality	Gets or sets the CheckMeshQuality.
Children	Gets the list of children.
ClsId	ClsId property.
CollisionAvoidance	Gets or sets the CollisionAvoidance.
Comments	Gets the list of associated comments.
ConnectionSize	Gets or sets the ConnectionSize.
ConnectionTolerance	Gets or sets the ConnectionTolerance.
ConnectionToleranceList	Gets or sets the ConnectionToleranceList.
ConnectionToleranceType	ConnectionToleranceType property.
CoplanarAngleTol	Gets or sets the CoplanarAngleTol.
CornerNodes	Gets the CornerNodes.
CurrentConfiguration	Gets the Assembly Mesh's current configuration Id.
CurvatureNormalAngle	Gets or sets the CurvatureNormalAngle.
DataModelObjectCategory	Gets the current DataModelObject's category.
DefaultShellMesher	Gets or sets the default meshing engine used to mesh sheet bodies. The default value is Quad Dominant.
DefaultSweepMesher	Gets or sets the default meshing method used to mesh sweepable bodies. The default value is Sweep.
DefeatureTolerance	Gets or sets the DefeatureTolerance.
DisplayStyle	Gets or sets the DisplayStyle.
ElementOrder	Gets or sets the ElementOrder.
ElementSize	Gets or sets the ElementSize.
Elements	Gets the Elements.
ExportFormat	Gets or sets the ExportFormat.
ExportUnit	Gets or sets the ExportUnit.
ExtraRetriesForAssembly	Gets or sets the ExtraRetriesForAssembly.
Figures	Gets the list of associated figures.
FilletRatio	Gets or sets the FilletRatio.
FirstLayerHeight	Gets or sets the FirstLayerHeight.
GapFactor	Gets or Sets the Gap factor for Global Inflation
GasketElements	Gets the GasketElements.
GeneratePinchOnRefresh	Gets or sets the GeneratePinchOnRefresh.
GetPhysicsPreference	GetPhysicsPreference property.
GlobalUseCustomTargetLimit	Gets or sets the GlobalUseCustomTargetLimit.
GroupingFolder	GroupingFolder property.
GrowthRate	Gets or sets the GrowthRate.
GrowthRateSF	Gets or sets the GrowthRateSF.
GrowthRateType	Gets or sets the GrowthRateType.
Hex20	Gets the Hex20.
Hex8	Gets the Hex8.
HoleRemovalTolerance	Gets or sets the HoleRemovalTolerance.
IconName	IconName property.
Images	Gets the list of associated images.
InflationAlgorithm	Gets or sets the InflationAlgorithm.
InflationElementType	Gets or Sets the InflationElementType
InflationOption	Gets or sets the InflationOption.
InitialSizeSeed	Gets or sets the InitialSizeSeed.
InternalObject	Gets the internal object. For advanced usage only.
IsMeshing	IsMeshing property.
Line2	Gets the Line2.
Line3	Gets the Line3.
LocalConnectionOption	Gets or sets the LocalConnectionOption.
LocalConnectionTolerance	Gets or sets the LocalConnectionTolerance.
Maximum	Gets the Maximum.
MaximumAngle	Gets or sets the MaximumAngle.
MaximumFaceSize	MaximumFaceSize property.
MaximumHeightOverBase	Gets or sets the MaximumHeightOverBase.
MaximumLayers	Gets or sets the MaximumLayers.
MaximumSize	Gets or sets the MaximumSize.
MaximumThickness	Gets or sets the MaximumThickness.
MeshBasedConnection	Gets or sets the MeshBasedConnection.
MeshMetric	Gets or sets the MeshMetric.
MeshMorphing	Gets or sets the MeshMorphing.
MeshSizing	Gets or sets Sizing Type in Mesh Sizing settings. The default value is Medium.
Method	Gets or sets the Method.
MidNodes	Gets the MidNodes.
MinimizeNumTriangles	Gets or sets the TriangleReduction option for Batch Connections.
Minimum	Gets the Minimum.
MinimumEdgeLength	Gets the MinimumEdgeLength.
MinimumSize	Gets or sets the MinimumSize.
MultiConnectionSteps	Gets or sets the MultiConnectionSteps.
Name	Name property.
NamedSelection	Gets or sets the NamedSelection.
Nodes	Gets the Nodes.
NumLayers	Gets or Sets the Number of Layers of Global Inflation
NumberOfCPUsForParallelPartMeshing	Gets or sets the NumberOfCPUsForParallelPartMeshing.
NumberOfRetries	Gets or sets the NumberOfRetries.
NumberOfShellMeshQualityMetrics	Gets the number of Mesh Quality Metrics
NumberOfSolidMeshQualityMetrics	NumberOfSolidMeshQualityMetrics property.
NumberOfSolidSurfaceMeshQualityMetrics	NumberOfSolidSurfaceMeshQualityMetrics property.
ObjectId	ObjectId property.
ObjectState	ObjectState property.
ObjectTags	ObjectTags property.
OrientationNodes	Gets the OrientationNodes.
Parent	Parent property.
PhysicsPreference	Gets or sets the PhysicsPreference.
PinchTolerance	Gets or sets the PinchTolerance.
Properties	Gets the list of properties for this object.
ProximityGapFactor	Gets or sets the ProximityGapFactor.
ProximityMinimumSize	Gets or sets the ProximityMinimumSize.
ProximitySizeSources	Gets or sets the ProximitySizeSources.
Pyramid13	Gets the Pyramid13.
Pyramid5	Gets the Pyramid5.
Quad4	Gets the Quad4.
Quad8	Gets the Quad8.
QuadMesh	Gets or sets the QuadMesh.
ReadOnly	Gets the ReadOnly.
Relevance	Gets or sets the Relevance.
RelevanceCenter	Gets or sets the RelevanceCenter.
Resolution	Gets or sets the Resolution.
RigidBodyBehavior	Gets or sets the BoundaryCondition.
RigidBodyFaceMeshType	Gets or sets the RigidBodyFaceMeshType.
ShapeChecking	Gets or sets the ShapeChecking.
SharedNodes	Gets the SharedNodes.
SheetLoopRemoval	Gets or sets the SheetLoopRemoval.
ShellElements	Gets the ShellElements.
ShowDetailedStatistics	Gets or sets the ShowDetailedStatistics.
Smoothing	Gets or sets the Smoothing.
SmoothingIterations	Gets or sets the SmoothingIterations.
SolidElements	Gets the SolidElements.
SolidShellElements	Gets the SolidShellElements.
SolverPreference	Gets or sets the SolverPreference.
SpanAngleCenter	Gets or sets the SpanAngleCenter.
StandardDeviation	Gets the StandardDeviation.
State	State property.
StraightSidedElements	Gets or sets the StraightSidedElements.
TargetCharacteristicLength	Gets or sets the TargetCharacteristicLength.
TargetExplicitAspectRatio	Gets or sets the TargetExplicitAspectRatio.
TargetQuality	Gets or sets the TargetQuality.
TargetSkewness	Gets or sets the TargetSkewness.
Tet10	Gets the Tet10.
Tet4	Gets the Tet4.
TopologyChecking	Gets or sets the TopologyChecking.
TransitionOption	Gets or sets the TransitionOption.
TransitionRatio	Gets or sets the TransitionRatio.
Tri3	Gets the Tri3.
Tri6	Gets the Tri6.
TriangleSurfaceMesher	Gets or sets the TriangleSurfaceMesher.
UseAdaptiveSizing	Gets or sets the UseAdaptiveSizing.
UseAdvancedSizeFunction	Gets or sets the UseAdvancedSizeFunction.
UseAutomaticInflation	Gets or sets the UseAutomaticInflation.
UseFixedSizeFunctionForSheets	Gets or sets the UseFixedSizeFunctionForSheets.
UseMeshOptimization	Gets or sets Mesh Optimization in Mesh Quality settings. The default value is TRUE.
UsePostSmoothing	Gets or sets the UsePostSmoothing.
UseSheetThicknessForPinch	Gets or sets the UseSheetThicknessForPinch.
ViewAdvancedOptions	Gets or sets the ViewAdvancedOptions.
VisibleProperties	Gets the list of properties that are visible for this object.
Wedge15	Gets the Wedge15.
Wedge6	Gets the Wedge6.
Worksheet	Get the MeshControlWorksheet action.

Property detail

property Mesh.AspectRatio: float | None

Gets or sets the AspectRatio.

property Mesh.AttachedRefs: List[int] | None

AttachedRefs property.

property Mesh.AutoMapFillets: bool | None

Gets or sets the Auto-Map Fillets in Mesh. Auto-Map Fillets enables the mesh generator to detect and map fillets within the limits specified by AutoMapFilletsMinimumRadius and AutoMapFilletsMaximumRadius. Default: False.

property Mesh.AutoMapFilletsMaximumRadius: Ansys.Core.Units.Quantity | None

Gets or sets the Maximum Radius for Auto-Map Fillets. Default: 5 * Element Size.

property Mesh.AutoMapFilletsMinimumRadius: Ansys.Core.Units.Quantity | None

Gets or sets the Minimum Radius for Auto-Map Fillets. Default: 0.5 * Element Size.

property Mesh.AutomaticMeshBasedDefeaturing: int | None

Gets or sets the AutomaticMeshBasedDefeaturing.

property Mesh.Average: Ansys.Core.Units.Quantity | None

Gets the Average.

property Mesh.Beam3: int | None

Gets the Beam3.

property Mesh.Beam4: int | None

Gets the Beam4.

property Mesh.BeamElements: int | None

Gets the BeamElements.

property Mesh.CaptureCurvature: bool | None

Gets or sets the CaptureCurvature.

property Mesh.CaptureProximity: bool | None

Gets or sets the CaptureProximity.

property Mesh.CheckMeshQuality: int | None

Gets or sets the CheckMeshQuality.

property Mesh.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property Mesh.ClsId: int | None

ClsId property.

property Mesh.CollisionAvoidance: int | None

Gets or sets the CollisionAvoidance.

property Mesh.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property Mesh.ConnectionSize: float | None

Gets or sets the ConnectionSize.

property Mesh.ConnectionTolerance: float | None

Gets or sets the ConnectionTolerance.

property Mesh.ConnectionToleranceList: str | None

Gets or sets the ConnectionToleranceList.

property Mesh.ConnectionToleranceType: int | None

ConnectionToleranceType property.

property Mesh.CoplanarAngleTol: Ansys.Core.Units.Quantity | None

Gets or sets the CoplanarAngleTol.

property Mesh.CornerNodes: int | None

Gets the CornerNodes.

property Mesh.CurrentConfiguration: int | None

Gets the Assembly Mesh's current configuration Id.

property Mesh.CurvatureNormalAngle: Ansys.Core.Units.Quantity | None

Gets or sets the CurvatureNormalAngle.

property Mesh.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property Mesh.DefaultShellMesher: Ansys.Mechanical.DataModel.Enums.DefaultShellMesherType | None

Gets or sets the default meshing engine used to mesh sheet bodies. The default value is Quad Dominant.

property Mesh.DefaultSweepMesher: Ansys.Mechanical.DataModel.Enums.SweepMesherType | None

Gets or sets the default meshing method used to mesh sweepable bodies. The default value is Sweep.

property Mesh.DefeatureTolerance: Ansys.Core.Units.Quantity | None

Gets or sets the DefeatureTolerance.

property Mesh.DisplayStyle: Ansys.Mechanical.DataModel.Enums.MeshDisplayStyle | None

Gets or sets the DisplayStyle.

property Mesh.ElementOrder: Ansys.Mechanical.DataModel.Enums.ElementOrder | None

Gets or sets the ElementOrder.

property Mesh.ElementSize: Ansys.Core.Units.Quantity | None

Gets or sets the ElementSize.

property Mesh.Elements: int | None

Gets the Elements.

property Mesh.ExportFormat: Ansys.Mechanical.DataModel.Enums.FluentExportMeshType | None

Gets or sets the ExportFormat.

property Mesh.ExportUnit: Ansys.Mechanical.DataModel.Enums.PolyflowExportUnit | None

Gets or sets the ExportUnit.

property Mesh.ExtraRetriesForAssembly: bool | None

Gets or sets the ExtraRetriesForAssembly.

property Mesh.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property Mesh.FilletRatio: float | None

Gets or sets the FilletRatio.

property Mesh.FirstLayerHeight: Ansys.Core.Units.Quantity | None

Gets or sets the FirstLayerHeight.

property Mesh.GapFactor: float | None

Gets or Sets the Gap factor for Global Inflation

property Mesh.GasketElements: int | None

Gets the GasketElements.

property Mesh.GeneratePinchOnRefresh: int | None

Gets or sets the GeneratePinchOnRefresh.

property Mesh.GetPhysicsPreference: Ansys.Mechanical.DataModel.Enums.MeshPhysicsPreferenceType | None

GetPhysicsPreference property.

property Mesh.GlobalUseCustomTargetLimit: int | None

Gets or sets the GlobalUseCustomTargetLimit.

property Mesh.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

GroupingFolder property.

property Mesh.GrowthRate: float | None

Gets or sets the GrowthRate.

property Mesh.GrowthRateSF: float | None

Gets or sets the GrowthRateSF.

property Mesh.GrowthRateType: int | None

Gets or sets the GrowthRateType.

property Mesh.Hex20: int | None

Gets the Hex20.

property Mesh.Hex8: int | None

Gets the Hex8.

property Mesh.HoleRemovalTolerance: float | None

Gets or sets the HoleRemovalTolerance.

property Mesh.IconName: str | None

IconName property.

property Mesh.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property Mesh.InflationAlgorithm: int | None

Gets or sets the InflationAlgorithm.

property Mesh.InflationElementType: Ansys.Mechanical.DataModel.Enums.MeshInflationElementType | None

Gets or Sets the InflationElementType

property Mesh.InflationOption: int | None

Gets or sets the InflationOption.

property Mesh.InitialSizeSeed: int | None

Gets or sets the InitialSizeSeed.

property Mesh.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlGroupAuto | None

Gets the internal object. For advanced usage only.

property Mesh.IsMeshing: bool | None

IsMeshing property.

property Mesh.Line2: int | None

Gets the Line2.

property Mesh.Line3: int | None

Gets the Line3.

property Mesh.LocalConnectionOption: int | None

Gets or sets the LocalConnectionOption.

property Mesh.LocalConnectionTolerance: str | None

Gets or sets the LocalConnectionTolerance.

property Mesh.Maximum: Ansys.Core.Units.Quantity | None

Gets the Maximum.

property Mesh.MaximumAngle: Ansys.Core.Units.Quantity | None

Gets or sets the MaximumAngle.

property Mesh.MaximumFaceSize: Ansys.Core.Units.Quantity | None

MaximumFaceSize property.

property Mesh.MaximumHeightOverBase: float | None

Gets or sets the MaximumHeightOverBase.

property Mesh.MaximumLayers: int | None

Gets or sets the MaximumLayers.

property Mesh.MaximumSize: Ansys.Core.Units.Quantity | None

Gets or sets the MaximumSize.

property Mesh.MaximumThickness: Ansys.Core.Units.Quantity | None

Gets or sets the MaximumThickness.

property Mesh.MeshBasedConnection: bool | None

Gets or sets the MeshBasedConnection.

property Mesh.MeshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType | None

Gets or sets the MeshMetric.

property Mesh.MeshMorphing: bool | None

Gets or sets the MeshMorphing.

property Mesh.MeshSizing: Ansys.Mechanical.DataModel.Enums.MeshSizingType | None

Gets or sets Sizing Type in Mesh Sizing settings. The default value is Medium.

property Mesh.Method: int | None

Gets or sets the Method.

property Mesh.MidNodes: int | None

Gets the MidNodes.

property Mesh.MinimizeNumTriangles: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None

Gets or sets the TriangleReduction option for Batch Connections.

property Mesh.Minimum: Ansys.Core.Units.Quantity | None

Gets the Minimum.

property Mesh.MinimumEdgeLength: Ansys.Core.Units.Quantity | None

Gets the MinimumEdgeLength.

property Mesh.MinimumSize: Ansys.Core.Units.Quantity | None

Gets or sets the MinimumSize.

property Mesh.MultiConnectionSteps: bool | None

Gets or sets the MultiConnectionSteps.

property Mesh.Name: str | None

Name property.

property Mesh.NamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None

Gets or sets the NamedSelection.

property Mesh.Nodes: int | None

Gets the Nodes.

property Mesh.NumLayers: int | None

Gets or Sets the Number of Layers of Global Inflation

property Mesh.NumberOfCPUsForParallelPartMeshing: int | None

Gets or sets the NumberOfCPUsForParallelPartMeshing.

property Mesh.NumberOfRetries: int | None

Gets or sets the NumberOfRetries.

property Mesh.NumberOfShellMeshQualityMetrics: int | None

Gets the number of Mesh Quality Metrics

property Mesh.NumberOfSolidMeshQualityMetrics: int | None

NumberOfSolidMeshQualityMetrics property.

property Mesh.NumberOfSolidSurfaceMeshQualityMetrics: int | None

NumberOfSolidSurfaceMeshQualityMetrics property.

property Mesh.ObjectId: int | None

ObjectId property.

property Mesh.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None

ObjectState property.

property Mesh.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None

ObjectTags property.

property Mesh.OrientationNodes: int | None

Gets the OrientationNodes.

property Mesh.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

Parent property.

property Mesh.PhysicsPreference: Ansys.Mechanical.DataModel.Enums.MeshPhysicsPreferenceType | None

Gets or sets the PhysicsPreference.

property Mesh.PinchTolerance: Ansys.Core.Units.Quantity | None

Gets or sets the PinchTolerance.

property Mesh.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property Mesh.ProximityGapFactor: float | None

Gets or sets the ProximityGapFactor.

property Mesh.ProximityMinimumSize: Ansys.Core.Units.Quantity | None

Gets or sets the ProximityMinimumSize.

property Mesh.ProximitySizeSources: Ansys.Mechanical.DataModel.Enums.ProximitySFSourcesType | None

Gets or sets the ProximitySizeSources.

property Mesh.Pyramid13: int | None

Gets the Pyramid13.

property Mesh.Pyramid5: int | None

Gets the Pyramid5.

property Mesh.Quad4: int | None

Gets the Quad4.

property Mesh.Quad8: int | None

Gets the Quad8.

property Mesh.QuadMesh: bool | None

Gets or sets the QuadMesh.

property Mesh.ReadOnly: bool | None

Gets the ReadOnly.

property Mesh.Relevance: int | None

Gets or sets the Relevance.

property Mesh.RelevanceCenter: int | None

Gets or sets the RelevanceCenter.

property Mesh.Resolution: int | None

Gets or sets the Resolution.

property Mesh.RigidBodyBehavior: Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyBehaviorType | None

Gets or sets the BoundaryCondition.

property Mesh.RigidBodyFaceMeshType: Ansys.Mechanical.DataModel.Enums.MeshControlGroupRigidBodyFaceMeshType | None

Gets or sets the RigidBodyFaceMeshType.

property Mesh.ShapeChecking: int | None

Gets or sets the ShapeChecking.

property Mesh.SharedNodes: int | None

Gets the SharedNodes.

property Mesh.SheetLoopRemoval: bool | None

Gets or sets the SheetLoopRemoval.

property Mesh.ShellElements: int | None

Gets the ShellElements.

property Mesh.ShowDetailedStatistics: bool | None

Gets or sets the ShowDetailedStatistics.

property Mesh.Smoothing: int | None

Gets or sets the Smoothing.

property Mesh.SmoothingIterations: int | None

Gets or sets the SmoothingIterations.

property Mesh.SolidElements: int | None

Gets the SolidElements.

property Mesh.SolidShellElements: int | None

Gets the SolidShellElements.

property Mesh.SolverPreference: Ansys.Mechanical.DataModel.Enums.MeshSolverPreferenceType | None

Gets or sets the SolverPreference.

property Mesh.SpanAngleCenter: int | None

Gets or sets the SpanAngleCenter.

property Mesh.StandardDeviation: Ansys.Core.Units.Quantity | None

Gets the StandardDeviation.

property Mesh.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None

State property.

property Mesh.StraightSidedElements: bool | None

Gets or sets the StraightSidedElements.

property Mesh.TargetCharacteristicLength: Ansys.Core.Units.Quantity | None

Gets or sets the TargetCharacteristicLength.

property Mesh.TargetExplicitAspectRatio: float | None

Gets or sets the TargetExplicitAspectRatio.

property Mesh.TargetQuality: float | None

Gets or sets the TargetQuality.

property Mesh.TargetSkewness: Ansys.Core.Units.Quantity | None

Gets or sets the TargetSkewness.

property Mesh.Tet10: int | None

Gets the Tet10.

property Mesh.Tet4: int | None

Gets the Tet4.

property Mesh.TopologyChecking: bool | None

Gets or sets the TopologyChecking.

property Mesh.TransitionOption: int | None

Gets or sets the TransitionOption.

property Mesh.TransitionRatio: float | None

Gets or sets the TransitionRatio.

property Mesh.Tri3: int | None

Gets the Tri3.

property Mesh.Tri6: int | None

Gets the Tri6.

property Mesh.TriangleSurfaceMesher: int | None

Gets or sets the TriangleSurfaceMesher.

property Mesh.UseAdaptiveSizing: bool | None

Gets or sets the UseAdaptiveSizing.

property Mesh.UseAdvancedSizeFunction: int | None

Gets or sets the UseAdvancedSizeFunction.

property Mesh.UseAutomaticInflation: int | None

Gets or sets the UseAutomaticInflation.

property Mesh.UseFixedSizeFunctionForSheets: bool | None

Gets or sets the UseFixedSizeFunctionForSheets.

property Mesh.UseMeshOptimization: bool | None

Gets or sets Mesh Optimization in Mesh Quality settings. The default value is TRUE.

property Mesh.UsePostSmoothing: int | None

Gets or sets the UsePostSmoothing.

property Mesh.UseSheetThicknessForPinch: bool | None

Gets or sets the UseSheetThicknessForPinch.

property Mesh.ViewAdvancedOptions: bool | None

Gets or sets the ViewAdvancedOptions.

property Mesh.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property Mesh.Wedge15: int | None

Gets the Wedge15.

property Mesh.Wedge6: int | None

Gets the Wedge6.

property Mesh.Worksheet: Ansys.ACT.Interfaces.Common.IWorksheet | None

Get the MeshControlWorksheet action.

Method detail

Mesh.Activate() → None

Activate the current object.

Mesh.ActivateAllSolidSurfaceWorksheetRows() → None

ActivateAllSolidSurfaceWorksheetRows method.

Mesh.ActivateAllSurfaceWorksheetRows() → None

ActivateAllSurfaceWorksheetRows method.

Mesh.ActivateAllVolumeWorksheetRows() → None

ActivateAllVolumeWorksheetRows method.

Mesh.AddAutomaticMethod() → Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod

Creates a new AutomaticMethod

Mesh.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

Mesh.AddConnect() → Ansys.ACT.Automation.Mechanical.MeshControls.Connect

Creates a new Connect Control

Mesh.AddContactMatchGroup() → Ansys.ACT.Automation.Mechanical.ContactMatchGroup

Add a new AddContactMatchGroup.

Mesh.AddContactSizing() → Ansys.ACT.Automation.Mechanical.MeshControls.ContactSizing

Creates a new ContactSizing

Mesh.AddDeviation() → Ansys.ACT.Automation.Mechanical.MeshControls.Deviation

Creates a new SagControl

Mesh.AddDirectMorph() → Ansys.ACT.Automation.Mechanical.DirectMorph

Add a new DirectMorph.

Mesh.AddFaceMeshing() → Ansys.ACT.Automation.Mechanical.MeshControls.FaceMeshing

Creates a new FaceMeshing

Mesh.AddFeatureSuppress() → Ansys.ACT.Automation.Mechanical.MeshControls.FeatureSuppress

Creates a new FeatureSuppress

Mesh.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

Mesh.AddGasket() → Ansys.ACT.Automation.Mechanical.MeshControls.Gasket

Adds a Gasket Object under Mesh

Mesh.AddGeometryFidelity() → Ansys.ACT.Automation.Mechanical.MeshControls.GeometryFidelity

Creates a new GeometryFidelity

Mesh.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

Mesh.AddInflation() → Ansys.ACT.Automation.Mechanical.MeshControls.Inflation

Creates a new Inflation

Mesh.AddManualMeshConnection() → Ansys.ACT.Automation.Mechanical.MeshConnection

Add a new ManualMeshConnection

Mesh.AddMatchControl() → Ansys.ACT.Automation.Mechanical.MeshControls.MatchControl

Creates a new MatchControl

Mesh.AddMeshConnectionGroup() → Ansys.ACT.Automation.Mechanical.MeshConnectionGroup

Add a new MeshConnectionGroup.

Mesh.AddMeshCopy() → Ansys.ACT.Automation.Mechanical.MeshControls.MeshCopy

Creates a new MeshCopy

Mesh.AddMeshLayers() → None

Adds Mesh Layers when contour enabled in Mesh Quality Workhseet mode.

Mesh.AddNodeMerge() → Ansys.ACT.Automation.Mechanical.NodeMerge

Add a new NodeMerge.

Mesh.AddNodeMergeGroup() → Ansys.ACT.Automation.Mechanical.NodeMergeGroup

Add a new NodeMergeGroup.

Mesh.AddPinch() → Ansys.ACT.Automation.Mechanical.MeshControls.Pinch

Creates a new Pinch

Mesh.AddPullExtrude() → Ansys.ACT.Automation.Mechanical.MeshExtrude

Add a new Pull (Extrude).

Mesh.AddPullRevolve() → Ansys.ACT.Automation.Mechanical.MeshExtrude

Add a new Pull (Revolve).

Mesh.AddPullSurfaceCoating() → Ansys.ACT.Automation.Mechanical.MeshExtrude

Add a new Pull (Surface Coating)).

Mesh.AddRefinement() → Ansys.ACT.Automation.Mechanical.MeshControls.Refinement

Creates a new Refinement

Mesh.AddRepairTopology() → Ansys.ACT.Automation.Mechanical.MeshControls.RepairTopology

Creates a new RepairTopology

Mesh.AddSizing() → Ansys.ACT.Automation.Mechanical.MeshControls.Sizing

Creates a new Sizing

Mesh.AddSmallestEdgesToSelection() → None

AddSmallestEdgesToSelection method.

Mesh.AddTopologySuppressControl() → Ansys.ACT.Automation.Mechanical.MeshControls.TopologySuppressControl

Creates a new TopologySuppressControl

Mesh.AddWasher() → Ansys.ACT.Automation.Mechanical.MeshControls.Washer

Creates a new SagControl

Mesh.AddWeld() → Ansys.ACT.Automation.Mechanical.MeshControls.Weld

Creates a new WeldControl

Mesh.CleanPartOrBody(dataModelObjects: Iterable) → None

Clear generated data for parts and/or bodies provided.

Mesh.ClearGeneratedData() → None

Run the ClearGeneratedData action.

Mesh.ColorByMeshingEngine() → None

ColorByMeshingEngine method.

Mesh.ComputeMeshQualityMetrics() → None

ComputeMeshQualityMetrics method.

Mesh.ConvertLayeredTetrahedronToSlicerWorkflow() → None

Convert Layered Tetrahedron method to Slicer workflow.

Mesh.ConvertToWorkflow() → None

ConvertToWorkflow method.

Mesh.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

Mesh.CreateHistogram(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → None

CreateHistogram method.

Mesh.CreateMQSolidSurfaceElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) → None

Create Mesh Quality SolidSurface Element Name Selection

Mesh.CreateMQSurfaceElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) → None

Create Mesh Quality Surface Element Named Selection

Mesh.CreateMQVolumeElementsNamedSelection(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, failCode: int) → None

Create Mesh Quality Volume Element Name Selection

Mesh.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef

CreateObjRef method.

Mesh.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

Mesh.CreatePinchControls() → None

Run the CreatePinchControls action.

Mesh.DeactivateAllSolidSurfaceWorksheetRows() → None

DeactivateAllSolidSurfaceWorksheetRows method.

Mesh.DeactivateAllSurfaceWorksheetRows() → None

DeactivateAllSurfaceWorksheetRows method.

Mesh.DeactivateAllVolumeWorksheetRows() → None

DeactivateAllVolumeWorksheetRows method.

Mesh.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

Mesh.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool

Equals method.

Mesh.ExportWeldDefinitionFile(filePath: str) → None

Export the weld definition file to the specified location.
If the folder does not exist or file cannot be written to the location, an exception will be thrown.
Pre-existing files will be overwritten.

Mesh.GenerateMesh() → None

Run the GenerateMesh action.

Mesh.GenerateMeshOnBodies(bodyList: List[int]) → None

GenerateMeshOnBodies method.

Mesh.GetAPIName(dispId: int) → str

Property name bound to dispId.

Mesh.GetActiveSolidSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Active Mesh Quality

Mesh.GetActiveSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Active User Mesh Quality

Mesh.GetActiveUnits() → Ansys.ACT.Interfaces.Common.MechanicalUnitSystemEnum

GetActiveUnits method.

Mesh.GetActiveVolumeMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Active Mesh Quality

Mesh.GetAdvancedMeshSizingDefaults() → Ansys.Mechanical.DataModel.Enums.AdvancedMeshSizingDefaultsType

Gets the Advanced mesh sizing defaults type. An exception is thrown if MeshSizing is not set to Advanced.

Mesh.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]

GetAllProperties method.

Mesh.GetCalculatedMaxFaceSize() → Ansys.Core.Units.Quantity

GetCalculatedMaxFaceSize method.

Mesh.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

Mesh.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData

GetDetailsView method.

Mesh.GetDisplayStyle() → Ansys.Common.Interop.DSObjectTypes.DSMeshDisplayStyle

GetDisplayStyle method.

Mesh.GetEnumName(enumType: type, value: int, dispId: int) → str

Mesh.GetHashCode() → int

GetHashCode method.

Mesh.GetIconFile() → System.Byte

GetIconFile method.

Mesh.GetIndexFromSolidSurfaceMeshMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get index from SolidSurface mesh quality worksheet from given mesh metric type.

Mesh.GetIndexFromSurfaceMeshMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Index of shell mesh metric vector based on mesh metric

Mesh.GetIndexFromVolumeMeshMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get index from solid mesh quality worksheet from given mesh metric type.

Mesh.GetIsShellTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Shell Target Metric

Mesh.GetIsSolidSurfaceTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get SolidSurface Target Metric

Mesh.GetIsSolidTargetMetric(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Solid Target Metric

Mesh.GetLegendStyle() → Ansys.Common.Interop.DSObjectTypes.DSMeshLegendStyle

GetLegendStyle method.

Mesh.GetLifetimeService() → Any

GetLifetimeService method.

Mesh.GetMeshMetricOptions(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Mechanical.DataModel.Enums.MetricPreference

GetMeshMetricOptions method.

Mesh.GetMeshMetricQuantityName(obj: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlGroupAuto) → str

GetMeshMetricQuantityName method.

Mesh.GetMeshQualityAdvancedView() → int

GetMeshQualityAdvancedView method.

Mesh.GetMeshQualityTabIndex() → int

GetMeshQualityTabIndex method.

Mesh.GetMeshSizing() → Ansys.Mechanical.DataModel.Enums.MeshSizingType

Gets the meshing sizing type. Default: Medium.

Mesh.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None

GetObjectData method.

Mesh.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

Mesh.GetPath() → str

GetPath method.

Mesh.GetPropertyName(dispId: int) → str

GetPropertyName method.

Mesh.GetPropertyValue(name: str) → Any

GetPropertyValue method.

Mesh.GetSheetQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get quantity type of sheet metric from mesh metric type

Mesh.GetSolidMeshQualityState() → int

Get the state of solid mesh quality worksheet tab

Mesh.GetSolidSurfaceMeshMetrics() → Ansys.Mechanical.DataModel.Enums.MeshMetricType

GetSolidSurfaceMeshMetrics method.

Mesh.GetSolidSurfaceMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Average Metric Value

Mesh.GetSolidSurfaceMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Mesh Quality Count Failed

Mesh.GetSolidSurfaceMeshQualityDisplayMetric(index: int) → Ansys.Mechanical.DataModel.Enums.MeshMetricType

Get SolidSurface Mesh Quality Metric

Mesh.GetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Error Limit

Mesh.GetSolidSurfaceMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get SolidSurface Mesh Quality Worksheet Error Limit is Default

Mesh.GetSolidSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Name

Mesh.GetSolidSurfaceMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float

Get Mesh Quality Percentage Failed

Mesh.GetSolidSurfaceMeshQualityState() → int

Get the state of solid surface mesh quality worksheet tab

Mesh.GetSolidSurfaceMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Mesh Quality Warning Count Failed

Mesh.GetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Warning Limit

Mesh.GetSolidSurfaceMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get SolidSurface Mesh Quality Worksheet Warning Limit is Default

Mesh.GetSolidSurfaceMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float

Get Mesh Quality Warning Percentage Failed

Mesh.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric BackgroundColor

Mesh.GetSolidSurfaceMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric Tooltip

Mesh.GetSolidSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Worst Metric Value

Mesh.GetSolidSurfaceQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Quantity type from SolidSurface mesh metric type

Mesh.GetSuppressibleTopology(topologyType: Ansys.Mechanical.DataModel.Enums.SuppressibleTopologyType) → Iterable[Ansys.ACT.Interfaces.Geometry.IGeoEntity]

Get all topologically suppressible entities of the specified type.

Mesh.GetSurfaceMeshMetrics() → Ansys.Mechanical.DataModel.Enums.MeshMetricType

GetSurfaceMeshMetrics method.

Mesh.GetSurfaceMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Average Metric Value

Mesh.GetSurfaceMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Mesh Quality Count Failed

Mesh.GetSurfaceMeshQualityDisplayMetric(index: int) → Ansys.Mechanical.DataModel.Enums.MeshMetricType

Get Surface Mesh Quality Metric

Mesh.GetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get User Mesh Quality Error Limit

Mesh.GetSurfaceMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Mesh Quality Error Limit is default

Mesh.GetSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Name

Mesh.GetSurfaceMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float

Get Mesh Quality Percentage Failed

Mesh.GetSurfaceMeshQualityState() → int

Get the state of surface mesh quality worksheet tab

Mesh.GetSurfaceMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Mesh Quality Warning Count Failed

Mesh.GetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get User Mesh Quality Warning Limit

Mesh.GetSurfaceMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Mesh Quality Warning Limit is default

Mesh.GetSurfaceMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float

Get Mesh Quality Warning Percentage Failed

Mesh.GetSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric BackgroundColor

Mesh.GetSurfaceMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric Tooltip

Mesh.GetSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Worst Metric Value

Mesh.GetType() → type

GetType method.

Mesh.GetVisibleProperties() → List[System.Reflection.PropertyInfo]

GetVisibleProperties method.

Mesh.GetVisiblePropertyNames() → List[str]

GetVisiblePropertyNames method.

Mesh.GetVolumeMeshMetrics() → Ansys.Mechanical.DataModel.Enums.MeshMetricType

GetVolumeMeshMetrics method.

Mesh.GetVolumeMeshQualityAverageMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Average Metric Value

Mesh.GetVolumeMeshQualityCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Mesh Quality Count Failed

Mesh.GetVolumeMeshQualityDisplayMetric(index: int) → Ansys.Mechanical.DataModel.Enums.MeshMetricType

Get Volume Mesh Quality Metric

Mesh.GetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Error Limit

Mesh.GetVolumeMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Volume Mesh Quality Worksheet Error Limit is Default

Mesh.GetVolumeMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Name

Mesh.GetVolumeMeshQualityPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float

Get Mesh Quality Percentage Failed

Mesh.GetVolumeMeshQualityWarningCountFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → int

Get Mesh Quality Warning Count Failed

Mesh.GetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Warning Limit

Mesh.GetVolumeMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Volume Mesh Quality Worksheet Warning Limit is Default

Mesh.GetVolumeMeshQualityWarningPercentageFailed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → float

Get Mesh Quality Warning Percentage Failed

Mesh.GetVolumeMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric BackgroundColor

Mesh.GetVolumeMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric Tooltip

Mesh.GetVolumeMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Worst Metric Value

Mesh.GetVolumeQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Quantity type from solid mesh metric type

Mesh.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

Mesh.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

Mesh.HasSheets() → bool

HasSheets method.

Mesh.HasSolids() → bool

HasSolids method.

Mesh.InitializeLifetimeService() → Any

InitializeLifetimeService method.

Mesh.IsDegree() → bool

IsDegree method.

Mesh.IsMeshMetricVisible(index: int) → bool

IsMeshMetricVisible method.

Mesh.IsPropertyEditable(dispId: int) → bool

IsPropertyEditable method.

Mesh.IsPropertyVisible(dispId: int) → bool

IsPropertyVisible method.

Mesh.LoadMQWorksheetFile(filePath: str) → None

LoadMQWorksheetFile method.

Mesh.OpenTroubleShootDoc() → None

OpenTroubleShootDoc method.

Mesh.PinchControlGeomtry(geomType: Ansys.Mechanical.DataModel.Enums.MeshControlPinchGeomtryType) → None

Set the geometry type for the Pinch Control.

Mesh.PreviewAllQuadLayers() → None

Preview quad layers on all Quad Layer controls of the Mesh.

Mesh.PreviewGeometryOnWeld(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → None

Preview geometry on one weld control provided.

Mesh.PreviewGeometryOnWeldWorksheet(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject, indices: Iterable[int]) → None

PreviewGeometryOnWeldWorksheet method.

Mesh.PreviewGeometryOnWelds(dataModelObjects: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → None

PreviewGeometryOnWelds method.

Mesh.PreviewInflation() → None

Run the PreviewInflation action.

Mesh.PreviewMeshOnAllWelds() → None

Preview model mesh on all weld controls of the Mesh.

Mesh.PreviewMeshOnWeld(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → None

Preview model mesh on one weld control provided.

Mesh.PreviewMeshOnWeldCurve(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → None

Preview model mesh on a given single weld curve.

Mesh.PreviewMeshOnWeldWorksheet(dataModelObject: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject, indices: Iterable[int]) → None

PreviewMeshOnWeldWorksheet method.

Mesh.PreviewMeshOnWelds(dataModelObjects: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → None

PreviewMeshOnWelds method.

Mesh.PreviewQuadLayers(dataModelObjects: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]) → None

PreviewQuadLayers method.

Mesh.PreviewSurfaceMesh() → None

Run the PreviewSurfaceMesh action.

Mesh.PreviewWelds() → None

Preview Welds.

Mesh.PrimeMeshFileHelper(filePath: str, mode: int) → None

PrimeMeshFileHelper

Mesh.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

Mesh.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property

PropertyById method.

Mesh.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

Mesh.RefreshMeshQualityGridInfo() → None

RefreshMeshQualityGridInfo method.

Mesh.RemoveMeshLayers() → None

Removes Mesh Layers when contour enabled in Mesh Quality Workhseet mode.

Mesh.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

Mesh.ResetMeshQualityMetrics() → None

ResetMeshQualityMetrics method.

Mesh.RunStackerDiagnostics(direction: int) → None

Find stackable bodies in a given direction

Mesh.RunStackerDiagnosticsOnAllFindX() → None

Find stackable bodies in the Global X direction

Mesh.RunStackerDiagnosticsOnAllFindY() → None

/// Find stackable bodies in the Global Y direction

Mesh.RunStackerDiagnosticsOnAllFindZ() → None

/// Find stackable bodies in the Global Z direction

Mesh.SaveBodiesToXMLHelper(filePath: str) → None

SaveMeshReportHelper

Mesh.SaveMQWorksheetFile(filePath: str) → None

SaveMQWorksheetFile method.

Mesh.SaveMeshReportForPartHelper(filePath: str, filter: int) → None

SaveMeshReportForPartHelper

Mesh.SaveMeshReportHelper(filePath: str, filter: int) → None

SaveMeshReportHelper

Mesh.SaveMeshToFileHelper(filePath: str, type: int) → None

SaveMeshToFileHelper

Mesh.SetActiveSolidSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) → None

Set Active Mesh Quality

Mesh.SetActiveSurfaceMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) → None

Set Active Mesh Quality

Mesh.SetActiveVolumeMeshQuality(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, activeMetric: float) → None

Set Active Mesh Quality

Mesh.SetAdvancedMeshSizingDefaults(value: Ansys.Mechanical.DataModel.Enums.AdvancedMeshSizingDefaultsType) → None

Sets the Advanced mesh sizing defaults type. This also updates some advanced settings to
pre-defined values based on the specified AdvancedMeshSizingDefaultsType.
Default: Medium.

An exception is thrown if MeshSizing is not set to Advanced.

Mesh.SetMeshMetricOptions(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, prefValue: Ansys.Mechanical.DataModel.Enums.MetricPreference) → None

SetMeshMetricOptions method.

Mesh.SetMeshQualityAdvancedView(advancedView: int) → None

SetMeshQualityAdvancedView method.

Mesh.SetMeshQualityTabIndex(tabIndex: int) → None

SetMeshQualityTabIndex method.

Mesh.SetMeshSizing(value: Ansys.Mechanical.DataModel.Enums.MeshSizingType) → None

Sets the meshing sizing type. This also updates some basic settings to pre-defined
values based on the specified MeshSizingType.

Default: Medium.

Mesh.SetMeshWorksheetActive(active: bool) → None

SetMeshWorksheetActive method.

Mesh.SetSolidMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → None

SetSolidMeshMetricLimits method.

Mesh.SetSolidSurfaceMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → None

SetSolidSurfaceMeshMetricLimits method.

Mesh.SetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None

Set Mesh Quality Error Limit

Mesh.SetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None

Set Mesh Quality Warning Limit

Mesh.SetSurfaceMeshMetricLimits(metricType: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLimit: Ansys.Core.Units.Quantity, ErrorLimit: Ansys.Core.Units.Quantity) → None

SetSurfaceMeshMetricLimits method.

Mesh.SetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None

Set Mesh Quality Error Level

Mesh.SetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None

Set Mesh Quality Warning Limit

Mesh.SetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None

Set Mesh Quality Error Limit

Mesh.SetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None

Set Mesh Quality Warning Limit

Mesh.ShowAxisymmetricBodies() → None

Show Axisymmetric bodies.

Mesh.ShowFeatureSuppressibleFaces() → None

Run the ShowFeatureSuppressibleFaces action.

Mesh.ShowMappableBodies() → None

Run the ShowMappableBodies action.

Mesh.ShowOverlappingFaces() → None

Run the ShowOverlappingFaces action.

Mesh.ShowProblematicBodies(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → None

ShowProblematicBodies method.

Mesh.ShowSuppressibleTopology(type: int) → None

Select all edges/vertices that are topologically suppressible.
Dimension of the topology (0 for Vertices, 1 for Edges)

Mesh.ShowSweepableBodies() → None

Run the ShowSweepableBodies action.

Mesh.ShowUnconnectedFacesNearEdges() → None

Run the ShowUnconnectedFreeEdges action.

Mesh.ToString() → str

ToString method.

Mesh.ToggleLegend(legendStyle: Ansys.Common.Interop.DSObjectTypes.DSMeshLegendStyle) → None

ToggleLegend method.

Mesh.Update() → None

Run the Update action.

Mesh.ValidateMeshQualityMetrics() → None

ValidateMeshQualityMetrics method.