`Pressure`#

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.BoundaryConditions.Pressure(internalObject: Any)#

Bases: object

Defines a Pressure.

Overview#

Methods

`Activate`	Activate the current object.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`CopyTo`	Copies all visible properties from this object to another.
`CreateObjRef`	CreateObjRef method.
`CreateParameter`	CreateParameter method.
`Delete`	Run the Delete action.
`Duplicate`	Creates a copy of the current DataModelObject.
`Equals`	Equals method.
`GetAPIName`	Property name bound to dispId.
`GetActivateAtLoadStep`	Gets whether the pressure is active at the specified load step.
`GetAllProperties`	GetAllProperties method.
`GetChildren`	Gets the list of children, filtered by type.
`GetComponentActivateAtLoadStep`	GetComponentActivateAtLoadStep method.
`GetDetailsView`	GetDetailsView method.
`GetEnumName`	Enum name bound to value
`GetHashCode`	GetHashCode method.
`GetIconFile`	GetIconFile method.
`GetLifetimeService`	GetLifetimeService method.
`GetObjectData`	GetObjectData method.
`GetParameter`	Gets the parameter corresponding to the given property.
`GetPath`	GetPath method.
`GetPropertyName`	GetPropertyName method.
`GetPropertyValue`	GetPropertyValue method.
`GetQuantityName`	GetQuantityName method.
`GetType`	GetType method.
`GetVisibleProperties`	GetVisibleProperties method.
`GetVisiblePropertyNames`	GetVisiblePropertyNames method.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`InitializeLifetimeService`	InitializeLifetimeService method.
`IsPropertyEditable`	IsPropertyEditable method.
`IsPropertyVisible`	IsPropertyVisible method.
`PromoteToNamedSelection`	Run the PromoteToNamedSelection action.
`PropertyByAPIName`	Get a property by its API name.
`PropertyById`	PropertyById method.
`PropertyByName`	Get a property by its unique name.
`RemoveParameter`	RemoveParameter method.
`SetActivateAtLoadStep`	Sets whether the pressure is active at the specified load step.
`SetComponentActivateAtLoadStep`	SetComponentActivateAtLoadStep method.
`ToString`	ToString method.

Properties

`AppliedBy`	Gets or sets the AppliedBy.
`ApplyTo`	Gets or Sets the Pressure ApplyTo type.
`AttachedRefs`	AttachedRefs property.
`Children`	Gets the list of children.
`ClsId`	ClsId property.
`Comments`	Gets the list of associated comments.
`CoordinateSystem`	Gets or sets the CoordinateSystem.
`CrackGrowth`	Gets or Sets the SMART CrackGrowthSelection.
`DataModelObjectCategory`	Gets the current DataModelObject's category.
`DefineBy`	Gets or sets the DefineBy.
`Direction`	Gets or sets the Direction.
`DynamicRelaxationBehavior`	Gets or sets the DynamicRelaxationBehavior.
`Figures`	Gets the list of associated figures.
`GraphControlsXAxis`	Gets or sets the GraphControlsXAxis.
`GroupingFolder`	GroupingFolder property.
`HarmonicIndex`	Gets or sets the HarmonicIndex.
`IconName`	IconName property.
`Images`	Gets the list of associated images.
`ImportableObjectSourceId`	ImportableObjectSourceId property.
`IndependentVariable`	Gets or sets the IndependentVariable.
`InternalObject`	InternalObject property.
`LoadVectorAssignment`	Gets or sets the LoadVectorAssignment.
`LoadVectorNumber`	Gets or sets the LoadVectorNumber.
`LoadVectorNumberImaginary`	Gets or sets the load vector number assigned to the load vector generated for the imaginary part of the pressure.
`LoadVectorNumberX`	Gets or sets the load vector number assigned to the load vector generated for the real part of the pressure in the X direction.
`LoadVectorNumberXImaginary`	Gets or sets the load vector number assigned to the load vector generated for the imaginary part of the pressure in the X direction.
`LoadVectorNumberY`	Gets or sets the load vector number assigned to the load vector generated for the real part of the pressure in the Y direction.
`LoadVectorNumberYImaginary`	Gets or sets the load vector number assigned to the load vector generated for the imaginary part of the pressure in the Y direction.
`LoadVectorNumberZ`	Gets or sets the load vector number assigned to the load vector generated for the real part of the pressure in the Z direction.
`LoadVectorNumberZImaginary`	Gets or sets the load vector number assigned to the load vector generated for the imaginary part of the pressure in the Z direction.
`LoadedArea`	Gets or sets the LoadedArea.
`Location`	Gets or sets the Location.
`Magnitude`	Gets or sets the Magnitude.
`MagnitudeImag`	Gets the MagnitudeImag.
`Name`	Name property.
`NonCyclicLoadingType`	Gets or sets the NonCyclicLoadingType.
`NumberOfSegments`	Gets or sets the NumberOfSegments.
`ObjectId`	ObjectId property.
`ObjectState`	ObjectState property.
`ObjectTags`	ObjectTags property.
`Parent`	Parent property.
`PhaseAngle`	Gets the PhaseAngle.
`Properties`	Gets the list of properties for this object.
`RangeMaximum`	Gets or sets the RangeMaximum.
`RangeMinimum`	Gets or sets the RangeMinimum.
`ReadOnly`	Gets or sets the ReadOnly.
`ScopingMethod`	Gets or sets the ScopingMethod.
`SectorNumber`	Gets or sets the SectorNumber.
`SharedRefBody`	Gets or sets the SharedRefBody.
`State`	State property.
`Suppressed`	Gets or sets the Suppressed.
`TableAssignment`	Gets or sets the TableAssignment.
`TransferableObjectId`	TransferableObjectId property.
`VisibleProperties`	Gets the list of properties that are visible for this object.
`XComponent`	Gets the XComponent.
`XComponentImag`	Gets the XComponentImag.
`XPhaseAngle`	Gets the XPhaseAngle.
`XYZFunctionCoordinateSystem`	Gets or sets the XYZFunctionCoordinateSystem.
`YComponent`	Gets the YComponent.
`YComponentImag`	Gets the YComponentImag.
`YPhaseAngle`	Gets the YPhaseAngle.
`ZComponent`	Gets the ZComponent.
`ZComponentImag`	Gets the ZComponentImag.
`ZPhaseAngle`	Gets the ZPhaseAngle.

Property detail#

property Pressure.AppliedBy: Ansys.Mechanical.DataModel.Enums.LoadAppliedBy | None#: Gets or sets the AppliedBy.

property Pressure.ApplyTo: Ansys.Mechanical.DataModel.Enums.CrackSurfaceLoadApplyTo | None#: Gets or Sets the Pressure ApplyTo type.

property Pressure.AttachedRefs: List[int] | None#: AttachedRefs property.

property Pressure.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets the list of children.

property Pressure.ClsId: int | None#: ClsId property.

property Pressure.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#: Gets the list of associated comments.

property Pressure.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#: Gets or sets the CoordinateSystem.

property Pressure.CrackGrowth: Ansys.ACT.Automation.Mechanical.SMARTCrackGrowth | None#: Gets or Sets the SMART CrackGrowthSelection.

property Pressure.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#: Gets the current DataModelObject's category.

property Pressure.DefineBy: Ansys.Mechanical.DataModel.Enums.LoadDefineBy | None#: Gets or sets the DefineBy.

property Pressure.Direction: Ansys.ACT.Math.Vector3D | None#: Gets or sets the Direction.

property Pressure.DynamicRelaxationBehavior: Ansys.Mechanical.DataModel.Enums.DynamicRelaxationBehaviorType | None#: Gets or sets the DynamicRelaxationBehavior.

property Pressure.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#: Gets the list of associated figures.

property Pressure.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.LoadVariableVariationType | None#: Gets or sets the GraphControlsXAxis.

property Pressure.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None#: GroupingFolder property.

property Pressure.HarmonicIndex: Ansys.ACT.Mechanical.Fields.Field | None#: Gets or sets the HarmonicIndex.

property Pressure.IconName: str | None#: IconName property.

property Pressure.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#: Gets the list of associated images.

property Pressure.ImportableObjectSourceId: str | None#: ImportableObjectSourceId property.

property Pressure.IndependentVariable: Ansys.Mechanical.DataModel.Enums.LoadVariableVariationType | None#: Gets or sets the IndependentVariable.

property Pressure.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSLoadAuto | None#: InternalObject property.

property Pressure.LoadVectorAssignment: Ansys.Mechanical.DataModel.Enums.LoadVectorAssignment | None#: Gets or sets the LoadVectorAssignment.

property Pressure.LoadVectorNumber: int | None#: Gets or sets the LoadVectorNumber.

property Pressure.LoadVectorNumberImaginary: int | None#: Gets or sets the load vector number assigned to the load vector generated for the imaginary part of the pressure. When Load Vector Assignment is set to Manual, the default value of '0' represents an invalid value that must be changed to a positive integer.

property Pressure.LoadVectorNumberX: int | None#: Gets or sets the load vector number assigned to the load vector generated for the real part of the pressure in the X direction. When Load Vector Assignment is set to Manual, the default value of '0' represents an invalid value that must be changed to a positive integer.

property Pressure.LoadVectorNumberXImaginary: int | None#: Gets or sets the load vector number assigned to the load vector generated for the imaginary part of the pressure in the X direction. When Load Vector Assignment is set to Manual, the default value of '0' represents an invalid value that must be changed to a positive integer.

property Pressure.LoadVectorNumberY: int | None#: Gets or sets the load vector number assigned to the load vector generated for the real part of the pressure in the Y direction. When Load Vector Assignment is set to Manual, the default value of '0' represents an invalid value that must be changed to a positive integer.

property Pressure.LoadVectorNumberYImaginary: int | None#: Gets or sets the load vector number assigned to the load vector generated for the imaginary part of the pressure in the Y direction. When Load Vector Assignment is set to Manual, the default value of '0' represents an invalid value that must be changed to a positive integer.

property Pressure.LoadVectorNumberZ: int | None#: Gets or sets the load vector number assigned to the load vector generated for the real part of the pressure in the Z direction. When Load Vector Assignment is set to Manual, the default value of '0' represents an invalid value that must be changed to a positive integer.

property Pressure.LoadVectorNumberZImaginary: int | None#: Gets or sets the load vector number assigned to the load vector generated for the imaginary part of the pressure in the Z direction. When Load Vector Assignment is set to Manual, the default value of '0' represents an invalid value that must be changed to a positive integer.

property Pressure.LoadedArea: Ansys.Mechanical.DataModel.Enums.LoadedArea | None#: Gets or sets the LoadedArea.

property Pressure.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#: Gets or sets the Location.

property Pressure.Magnitude: Any | None#: Gets or sets the Magnitude.

property Pressure.MagnitudeImag: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the MagnitudeImag.

property Pressure.Name: str | None#: Name property.

property Pressure.NonCyclicLoadingType: Ansys.Mechanical.DataModel.Enums.NonCyclicLoadingType | None#: Gets or sets the NonCyclicLoadingType.

property Pressure.NumberOfSegments: int | None#: Gets or sets the NumberOfSegments.

property Pressure.ObjectId: int | None#: ObjectId property.

property Pressure.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None#: ObjectState property.

property Pressure.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None#: ObjectTags property.

property Pressure.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None#: Parent property.

property Pressure.PhaseAngle: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the PhaseAngle.

property Pressure.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties for this object.

property Pressure.RangeMaximum: Ansys.Core.Units.Quantity | None#: Gets or sets the RangeMaximum.

property Pressure.RangeMinimum: Ansys.Core.Units.Quantity | None#: Gets or sets the RangeMinimum.

property Pressure.ReadOnly: bool | None#: Gets or sets the ReadOnly.

property Pressure.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#: Gets or sets the ScopingMethod.

property Pressure.SectorNumber: Ansys.ACT.Mechanical.Fields.Field | None#: Gets or sets the SectorNumber.

property Pressure.SharedRefBody: Ansys.ACT.Automation.Mechanical.Body | None#: Gets or sets the SharedRefBody.

property Pressure.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None#: State property.

property Pressure.Suppressed: bool | None#: Gets or sets the Suppressed.

property Pressure.TableAssignment: Ansys.ACT.Automation.Mechanical.Table | None#: Gets or sets the TableAssignment.

property Pressure.TransferableObjectId: str | None#: TransferableObjectId property.

property Pressure.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties that are visible for this object.

property Pressure.XComponent: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the XComponent.

property Pressure.XComponentImag: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the XComponentImag.

property Pressure.XPhaseAngle: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the XPhaseAngle.

property Pressure.XYZFunctionCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#: Gets or sets the XYZFunctionCoordinateSystem.

property Pressure.YComponent: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the YComponent.

property Pressure.YComponentImag: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the YComponentImag.

property Pressure.YPhaseAngle: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the YPhaseAngle.

property Pressure.ZComponent: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the ZComponent.

property Pressure.ZComponentImag: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the ZComponentImag.

property Pressure.ZPhaseAngle: Ansys.ACT.Mechanical.Fields.Field | None#: Gets the ZPhaseAngle.

Method detail#

Pressure.Activate() → None#: Activate the current object.

Pressure.AddComment() → Ansys.ACT.Automation.Mechanical.Comment#: Creates a new child Comment.

Pressure.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure#: Creates a new child Figure.

Pressure.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image#

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

Pressure.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None#: Copies all visible properties from this object to another.

Pressure.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef#: CreateObjRef method.

Pressure.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: CreateParameter method.

Pressure.Delete() → None#: Run the Delete action.

Pressure.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Creates a copy of the current DataModelObject.

Pressure.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool#: Equals method.

Pressure.GetAPIName(dispId: int) → str#: Property name bound to dispId.

Pressure.GetActivateAtLoadStep(stepNumber: int) → bool#: Gets whether the pressure is active at the specified load step.

Pressure.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]#: GetAllProperties method.

Pressure.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]#: Gets the list of children, filtered by type.

Pressure.GetComponentActivateAtLoadStep(component: str, stepNumber: int) → bool#: GetComponentActivateAtLoadStep method.

Pressure.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData#: GetDetailsView method.

Pressure.GetEnumName(enumType: type, value: int, dispId: int) → str#: Enum name bound to value

Pressure.GetHashCode() → int#: GetHashCode method.

Pressure.GetIconFile() → System.Byte#: GetIconFile method.

Pressure.GetLifetimeService() → Any#: GetLifetimeService method.

Pressure.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None#: GetObjectData method.

Pressure.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: Gets the parameter corresponding to the given property.

Pressure.GetPath() → str#: GetPath method.

Pressure.GetPropertyName(dispId: int) → str#: GetPropertyName method.

Pressure.GetPropertyValue(name: str) → Any#: GetPropertyValue method.

Pressure.GetQuantityName() → str#: GetQuantityName method.

Pressure.GetType() → type#: GetType method.

Pressure.GetVisibleProperties() → List[System.Reflection.PropertyInfo]#: GetVisibleProperties method.

Pressure.GetVisiblePropertyNames() → List[str]#: GetVisiblePropertyNames method.

Pressure.GroupAllSimilarChildren() → None#: Run the GroupAllSimilarChildren action.

Pressure.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#: Run the GroupSimilarObjects action.

Pressure.InitializeLifetimeService() → Any#: InitializeLifetimeService method.

Pressure.IsPropertyEditable(dispId: int) → bool#: IsPropertyEditable method.

Pressure.IsPropertyVisible(dispId: int) → bool#: IsPropertyVisible method.

Pressure.PromoteToNamedSelection() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]#: Run the PromoteToNamedSelection action.

Pressure.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property#

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

Pressure.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property#: PropertyById method.

Pressure.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property#: Get a property by its unique name.

Pressure.RemoveParameter(propName: str) → None#: RemoveParameter method.

Pressure.SetActivateAtLoadStep(stepNumber: int, bActive: bool) → None#: Sets whether the pressure is active at the specified load step.

Pressure.SetComponentActivateAtLoadStep(component: str, stepNumber: int, bActive: bool) → None#: SetComponentActivateAtLoadStep method.

Pressure.ToString() → str#: ToString method.

Pressure#

Overview#

Property detail#

Method detail#

`Pressure`#