STLAMSupport

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.AdditiveManufacturing.STLAMSupport(internalObject: Any)

Bases: object

Defines a STLAMSupport.

Overview

Methods

Activate	Activate the current object.
AddCommandSnippet	Creates a new CommandSnippet
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateNamedSelectionOfExternalElementFaces	Create a named selection of the generated exterior element faces.
CreateNamedSelectionOfGeneratedElements	Create a named selection of the generated elements.
CreateObjRef	CreateObjRef method.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
Equals	Equals method.
ExportStl	Export STL data.
GenerateSupportBodies	Generate Support Bodies.
GetAPIName	Property name bound to dispId.
GetAllProperties	GetAllProperties method.
GetChildren	Gets the list of children, filtered by type.
GetDetailsView	GetDetailsView method.
GetEnumName	Enum name bound to value
GetGeneratedBody	Returns the generated body object
GetHashCode	GetHashCode method.
GetIconFile	GetIconFile method.
GetLifetimeService	GetLifetimeService method.
GetObjectData	GetObjectData method.
GetParameter	Gets the parameter corresponding to the given property.
GetPath	GetPath method.
GetPropertyName	GetPropertyName method.
GetPropertyValue	GetPropertyValue method.
GetType	GetType method.
GetVisibleProperties	GetVisibleProperties method.
GetVisiblePropertyNames	GetVisiblePropertyNames method.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
ImportSTL	Run the ImportSTL action.
InitializeLifetimeService	InitializeLifetimeService method.
IsPropertyEditable	IsPropertyEditable method.
IsPropertyVisible	IsPropertyVisible method.
PropertyByAPIName	Get a property by its API name.
PropertyById	PropertyById method.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
ToString	ToString method.

Properties

AttachedRefs	AttachedRefs property.
Children	Gets the list of children.
ClsId	ClsId property.
Comments	Gets the list of associated comments.
DataModelObjectCategory	Gets the current DataModelObject's category.
DensityMultiple	Gets or sets the DensityMultiple.
ElasticModulusMultipleInX	Gets or sets the ElasticModulusMultipleInX.
ElasticModulusMultipleInY	Gets or sets the ElasticModulusMultipleInY.
ElasticModulusMultipleInZ	Gets or sets the ElasticModulusMultipleInZ.
ElementSize	Gets the ElementSize.
Figures	Gets the list of associated figures.
Filename	Gets or sets the Filename.
GeometrySelection	Gets or sets the GeometrySelection.
GroupingFolder	GroupingFolder property.
IconName	IconName property.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
LengthUnits	Gets or sets the LengthUnits.
MaterialMultiplier	Gets or sets the MaterialMultiplier.
MultiplierEntry	Gets or sets the MultiplierEntry.
Name	Name property.
ObjectId	ObjectId property.
ObjectState	ObjectState property.
ObjectTags	ObjectTags property.
Parent	Parent property.
Properties	Gets the list of properties for this object.
STL	Gets or sets the STL.
STLSupportType	Gets or sets the STLSupportType.
STLSupportView	Gets or sets the STLSupportView.
ShearModulusMultipleInXY	Gets or sets the ShearModulusMultipleInXY.
ShearModulusMultipleInXZ	Gets or sets the ShearModulusMultipleInXZ.
ShearModulusMultipleInYZ	Gets or sets the ShearModulusMultipleInYZ.
Source	Gets or sets the Source.
State	State property.
StlWallThickness	Gets or sets the StlWallThickness.
SubsampleRate	Gets or sets the SubsampleRate.
SupportType	Gets or sets the SupportType.
Suppressed	Gets or sets the Suppressed state.
ThermalConductivityMultipleInX	Gets or sets the ThermalConductivityMultipleInX.
ThermalConductivityMultipleInY	Gets or sets the ThermalConductivityMultipleInY.
ThermalConductivityMultipleInZ	Gets or sets the ThermalConductivityMultipleInZ.
VisibleProperties	Gets the list of properties that are visible for this object.
Volume	Gets or sets the Volume.
VoxelSize	Gets the VoxelSize.
WallSpacing	Gets or sets the WallSpacing.
WallThickness	Gets or sets the WallThickness.

Property detail

property STLAMSupport.AttachedRefs: List[int] | None

AttachedRefs property.

property STLAMSupport.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property STLAMSupport.ClsId: int | None

ClsId property.

property STLAMSupport.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property STLAMSupport.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property STLAMSupport.DensityMultiple: float | None

Gets or sets the DensityMultiple.

property STLAMSupport.ElasticModulusMultipleInX: float | None

Gets or sets the ElasticModulusMultipleInX.

property STLAMSupport.ElasticModulusMultipleInY: float | None

Gets or sets the ElasticModulusMultipleInY.

property STLAMSupport.ElasticModulusMultipleInZ: float | None

Gets or sets the ElasticModulusMultipleInZ.

property STLAMSupport.ElementSize: Ansys.Core.Units.Quantity | None

Gets the ElementSize.

property STLAMSupport.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property STLAMSupport.Filename: str | None

Gets or sets the Filename.

property STLAMSupport.GeometrySelection: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the GeometrySelection.

property STLAMSupport.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

GroupingFolder property.

property STLAMSupport.IconName: str | None

IconName property.

property STLAMSupport.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property STLAMSupport.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSAMSupportAuto | None

Gets the internal object. For advanced usage only.

property STLAMSupport.LengthUnits: Ansys.Mechanical.DataModel.Enums.WBUnitSystemType | None

Gets or sets the LengthUnits.

property STLAMSupport.MaterialMultiplier: float | None

Gets or sets the MaterialMultiplier.

property STLAMSupport.MultiplierEntry: Ansys.Mechanical.DataModel.Enums.AMMultiplierEntryType | None

Gets or sets the MultiplierEntry.

property STLAMSupport.Name: str | None

Name property.

property STLAMSupport.ObjectId: int | None

ObjectId property.

property STLAMSupport.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None

ObjectState property.

property STLAMSupport.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None

ObjectTags property.

property STLAMSupport.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

Parent property.

property STLAMSupport.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property STLAMSupport.STL: Ansys.ACT.Automation.Mechanical.STL | None

Gets or sets the STL.

property STLAMSupport.STLSupportType: Ansys.Mechanical.DataModel.Enums.AMSupportSTLType | None

Gets or sets the STLSupportType.

property STLAMSupport.STLSupportView: Ansys.Mechanical.DataModel.Enums.STLSupportViewType | None

Gets or sets the STLSupportView.

property STLAMSupport.ShearModulusMultipleInXY: float | None

Gets or sets the ShearModulusMultipleInXY.

property STLAMSupport.ShearModulusMultipleInXZ: float | None

Gets or sets the ShearModulusMultipleInXZ.

property STLAMSupport.ShearModulusMultipleInYZ: float | None

Gets or sets the ShearModulusMultipleInYZ.

property STLAMSupport.Source: Ansys.Mechanical.DataModel.Enums.AMStlSource | None

Gets or sets the Source.

property STLAMSupport.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None

State property.

property STLAMSupport.StlWallThickness: Ansys.Core.Units.Quantity | None

Gets or sets the StlWallThickness.

property STLAMSupport.SubsampleRate: int | None

Gets or sets the SubsampleRate.

property STLAMSupport.SupportType: Ansys.Mechanical.DataModel.Enums.AMSupportType | None

Gets or sets the SupportType.

property STLAMSupport.Suppressed: bool | None

Gets or sets the Suppressed state.

property STLAMSupport.ThermalConductivityMultipleInX: float | None

Gets or sets the ThermalConductivityMultipleInX.

property STLAMSupport.ThermalConductivityMultipleInY: float | None

Gets or sets the ThermalConductivityMultipleInY.

property STLAMSupport.ThermalConductivityMultipleInZ: float | None

Gets or sets the ThermalConductivityMultipleInZ.

property STLAMSupport.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property STLAMSupport.Volume: Ansys.Core.Units.Quantity | None

Gets or sets the Volume.

property STLAMSupport.VoxelSize: Ansys.Core.Units.Quantity | None

Gets the VoxelSize.

property STLAMSupport.WallSpacing: Ansys.Core.Units.Quantity | None

Gets or sets the WallSpacing.

property STLAMSupport.WallThickness: Ansys.Core.Units.Quantity | None

Gets or sets the WallThickness.

Method detail

STLAMSupport.Activate() → None

Activate the current object.

STLAMSupport.AddCommandSnippet() → Ansys.ACT.Automation.Mechanical.CommandSnippet

Creates a new CommandSnippet

STLAMSupport.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

STLAMSupport.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

STLAMSupport.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

STLAMSupport.ClearGeneratedData() → None

Run the ClearGeneratedData action.

STLAMSupport.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

STLAMSupport.CreateNamedSelectionOfExternalElementFaces() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]

Create a named selection of the generated exterior element faces.

STLAMSupport.CreateNamedSelectionOfGeneratedElements() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]

Create a named selection of the generated elements.

STLAMSupport.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef

CreateObjRef method.

STLAMSupport.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

STLAMSupport.Delete() → None

Run the Delete action.

STLAMSupport.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

STLAMSupport.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool

Equals method.

STLAMSupport.ExportStl(filename: str, progress: Ansys.Mechanical.Application.Progress) → None

Export STL data.

STLAMSupport.GenerateSupportBodies(progress: Ansys.Mechanical.Application.Progress) → None

Generate Support Bodies.

STLAMSupport.GetAPIName(dispId: int) → str

Property name bound to dispId.

STLAMSupport.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]

GetAllProperties method.

STLAMSupport.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

STLAMSupport.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData

GetDetailsView method.

STLAMSupport.GetEnumName(enumType: type, value: int, dispId: int) → str

Enum name bound to value

STLAMSupport.GetGeneratedBody() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Returns the generated body object

STLAMSupport.GetHashCode() → int

GetHashCode method.

STLAMSupport.GetIconFile() → System.Byte

GetIconFile method.

STLAMSupport.GetLifetimeService() → Any

GetLifetimeService method.

STLAMSupport.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None

GetObjectData method.

STLAMSupport.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

STLAMSupport.GetPath() → str

GetPath method.

STLAMSupport.GetPropertyName(dispId: int) → str

GetPropertyName method.

STLAMSupport.GetPropertyValue(name: str) → Any

GetPropertyValue method.

STLAMSupport.GetType() → type

GetType method.

STLAMSupport.GetVisibleProperties() → List[System.Reflection.PropertyInfo]

GetVisibleProperties method.

STLAMSupport.GetVisiblePropertyNames() → List[str]

GetVisiblePropertyNames method.

STLAMSupport.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

STLAMSupport.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

STLAMSupport.ImportSTL() → None

Run the ImportSTL action.

STLAMSupport.InitializeLifetimeService() → Any

InitializeLifetimeService method.

STLAMSupport.IsPropertyEditable(dispId: int) → bool

IsPropertyEditable method.

STLAMSupport.IsPropertyVisible(dispId: int) → bool

IsPropertyVisible method.

STLAMSupport.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

STLAMSupport.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property

PropertyById method.

STLAMSupport.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

STLAMSupport.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

STLAMSupport.ToString() → str

ToString method.