MemberSizeManufacturingConstraint

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.MemberSizeManufacturingConstraint(internalObject: Any)

Bases: object

Defines a MemberSizeManufacturingConstraint.

Overview

Methods

Activate	Activate the current object.
CopyTo	Copies all visible properties from this object to another.
CreateObjRef	CreateObjRef method.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
Equals	Equals method.
GetAPIName	Property name bound to dispId.
GetAllProperties	GetAllProperties method.
GetChildren	Gets the list of children, filtered by type.
GetDetailsView	GetDetailsView method.
GetEnumName	Enum name bound to value
GetHashCode	GetHashCode method.
GetIconFile	GetIconFile method.
GetLifetimeService	GetLifetimeService method.
GetObjectData	GetObjectData method.
GetParameter	Gets the parameter corresponding to the given property.
GetPath	GetPath method.
GetPropertyName	GetPropertyName method.
GetPropertyValue	GetPropertyValue method.
GetType	GetType method.
GetVisibleProperties	GetVisibleProperties method.
GetVisiblePropertyNames	GetVisiblePropertyNames method.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
InitializeLifetimeService	InitializeLifetimeService method.
IsPropertyEditable	IsPropertyEditable method.
IsPropertyVisible	IsPropertyVisible method.
PropertyByAPIName	Get a property by its API name.
PropertyById	PropertyById method.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.
ToString	ToString method.

Properties

AttachedRefs	AttachedRefs property.
Children	Gets the list of children.
ClsId	ClsId property.
CoordinateSystemForThicknessMeasure	Gets or sets the Coordinate system used as the basis for measurements (only used when ThicknessMeasureType is InPlane).
DataModelObjectCategory	Gets the current DataModelObject's category.
GapSize	Gets or sets the GapSize.
GapSizeControlledType	Gets or sets the GapSizeControlledType.
GroupingFolder	GroupingFolder property.
IconName	IconName property.
InternalObject	Gets the internal object. For advanced usage only.
Location	Gets or sets the Location.
MaxSize	Gets or sets the MaxSize.
Maximum	Gets or sets the Maximum.
MinSize	Gets or sets the MinSize.
Minimum	Gets or sets the Minimum.
Name	Name property.
NormalAxisForInPlaneMeasure	Gets or sets the normal axis to plane considered for InPlane measurement type. Only positive direction enums will be accepted (“PositiveXAxis”, “PositiveYAxis”, “PositiveXAxis”).
ObjectId	ObjectId property.
ObjectState	ObjectState property.
ObjectTags	ObjectTags property.
Parent	Parent property.
Properties	Gets the list of properties for this object.
ScopingMethod	Gets or sets the ScopingMethod.
Selection	Gets or sets the Selection.
State	State property.
Suppressed	Gets or sets the Suppressed.
ThicknessMeasureType	Gets or sets the thickness measurement type (applicable for the MaxSize and GapSize properties). The default type is Isotropic.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property MemberSizeManufacturingConstraint.AttachedRefs: List[int] | None

AttachedRefs property.

property MemberSizeManufacturingConstraint.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property MemberSizeManufacturingConstraint.ClsId: int | None

ClsId property.

property MemberSizeManufacturingConstraint.CoordinateSystemForThicknessMeasure: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the Coordinate system used as the basis for measurements (only used when ThicknessMeasureType is InPlane).

property MemberSizeManufacturingConstraint.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property MemberSizeManufacturingConstraint.GapSize: Ansys.Core.Units.Quantity | None

Gets or sets the GapSize.

property MemberSizeManufacturingConstraint.GapSizeControlledType: Ansys.Mechanical.DataModel.Enums.ManuMemberSizeControlledType | None

Gets or sets the GapSizeControlledType.

property MemberSizeManufacturingConstraint.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

GroupingFolder property.

property MemberSizeManufacturingConstraint.IconName: str | None

IconName property.

property MemberSizeManufacturingConstraint.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSTopoConstraintAuto | None

Gets the internal object. For advanced usage only.

property MemberSizeManufacturingConstraint.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property MemberSizeManufacturingConstraint.MaxSize: Ansys.Core.Units.Quantity | None

Gets or sets the MaxSize.

property MemberSizeManufacturingConstraint.Maximum: Ansys.Mechanical.DataModel.Enums.ManuMemberSizeControlledType | None

Gets or sets the Maximum.

property MemberSizeManufacturingConstraint.MinSize: Ansys.Core.Units.Quantity | None

Gets or sets the MinSize.

property MemberSizeManufacturingConstraint.Minimum: Ansys.Mechanical.DataModel.Enums.ManuMemberSizeControlledType | None

Gets or sets the Minimum.

property MemberSizeManufacturingConstraint.Name: str | None

Name property.

property MemberSizeManufacturingConstraint.NormalAxisForInPlaneMeasure: Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None

Gets or sets the normal axis to plane considered for InPlane measurement type. Only positive direction enums will be accepted (“PositiveXAxis”, “PositiveYAxis”, “PositiveXAxis”).

InvalidArgumentException: Any unsupported enum value.

property MemberSizeManufacturingConstraint.ObjectId: int | None

ObjectId property.

property MemberSizeManufacturingConstraint.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None

ObjectState property.

property MemberSizeManufacturingConstraint.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None

ObjectTags property.

property MemberSizeManufacturingConstraint.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

Parent property.

property MemberSizeManufacturingConstraint.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property MemberSizeManufacturingConstraint.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ScopingMethod.

property MemberSizeManufacturingConstraint.Selection: Ansys.ACT.Automation.Mechanical.OptimizationRegion | None

Gets or sets the Selection.

property MemberSizeManufacturingConstraint.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None

State property.

property MemberSizeManufacturingConstraint.Suppressed: bool | None

Gets or sets the Suppressed.

property MemberSizeManufacturingConstraint.ThicknessMeasureType: Ansys.Mechanical.DataModel.Enums.MemberSizeMeasurementType | None

Gets or sets the thickness measurement type (applicable for the MaxSize and GapSize properties). The default type is Isotropic.

property MemberSizeManufacturingConstraint.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

MemberSizeManufacturingConstraint.Activate() → None

Activate the current object.

MemberSizeManufacturingConstraint.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

MemberSizeManufacturingConstraint.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef

CreateObjRef method.

MemberSizeManufacturingConstraint.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

MemberSizeManufacturingConstraint.Delete() → None

Run the Delete action.

MemberSizeManufacturingConstraint.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

MemberSizeManufacturingConstraint.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool

Equals method.

MemberSizeManufacturingConstraint.GetAPIName(dispId: int) → str

Property name bound to dispId.

MemberSizeManufacturingConstraint.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]

GetAllProperties method.

MemberSizeManufacturingConstraint.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

MemberSizeManufacturingConstraint.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData

GetDetailsView method.

MemberSizeManufacturingConstraint.GetEnumName(enumType: type, value: int, dispId: int) → str

Enum name bound to value

MemberSizeManufacturingConstraint.GetHashCode() → int

GetHashCode method.

MemberSizeManufacturingConstraint.GetIconFile() → System.Byte

GetIconFile method.

MemberSizeManufacturingConstraint.GetLifetimeService() → Any

GetLifetimeService method.

MemberSizeManufacturingConstraint.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None

GetObjectData method.

MemberSizeManufacturingConstraint.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

MemberSizeManufacturingConstraint.GetPath() → str

GetPath method.

MemberSizeManufacturingConstraint.GetPropertyName(dispId: int) → str

GetPropertyName method.

MemberSizeManufacturingConstraint.GetPropertyValue(name: str) → Any

GetPropertyValue method.

MemberSizeManufacturingConstraint.GetType() → type

GetType method.

MemberSizeManufacturingConstraint.GetVisibleProperties() → List[System.Reflection.PropertyInfo]

GetVisibleProperties method.

MemberSizeManufacturingConstraint.GetVisiblePropertyNames() → List[str]

GetVisiblePropertyNames method.

MemberSizeManufacturingConstraint.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

MemberSizeManufacturingConstraint.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

MemberSizeManufacturingConstraint.InitializeLifetimeService() → Any

InitializeLifetimeService method.

MemberSizeManufacturingConstraint.IsPropertyEditable(dispId: int) → bool

IsPropertyEditable method.

MemberSizeManufacturingConstraint.IsPropertyVisible(dispId: int) → bool

IsPropertyVisible method.

MemberSizeManufacturingConstraint.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MemberSizeManufacturingConstraint.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property

PropertyById method.

MemberSizeManufacturingConstraint.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

MemberSizeManufacturingConstraint.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

MemberSizeManufacturingConstraint.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.

MemberSizeManufacturingConstraint.ToString() → str

ToString method.