GeometryImportGroup

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.GeometryImportGroup(internalObject: Any)

Bases: object

Defines a GeometryImportGroup.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddGeometryImport	Create the object for working with an imported part.
AddImage	Creates a new child Image.
AddModelImport	AddModelImport method.
AddModelPreview	AddModelPreview method.
CanAddGeometryImport	CanAddGeometryImport method.
CanAddModelImport	CanAddModelImport method.
CanImportModelPreview	CanImportModelPreview method.
CopyTo	Copies all visible properties from this object to another.
CreateObjRef	CreateObjRef method.
CreateParameter	Creates a new parameter for a Property.
Duplicate	Creates a copy of the current DataModelObject.
Equals	Equals method.
GetAPIName	Property name bound to dispId.
GetAllProperties	GetAllProperties method.
GetChildren	Gets the list of children, filtered by type.
GetDetailsView	GetDetailsView method.
GetEnumName	Enum name bound to value
GetEnumerator	GetEnumerator method.
GetHashCode	GetHashCode method.
GetIconFile	GetIconFile method.
GetLifetimeService	GetLifetimeService method.
GetObjectData	GetObjectData method.
GetParameter	Gets the parameter corresponding to the given property.
GetPath	GetPath method.
GetPropertyName	GetPropertyName method.
GetPropertyValue	GetPropertyValue method.
GetType	GetType method.
GetVisibleProperties	GetVisibleProperties method.
GetVisiblePropertyNames	GetVisiblePropertyNames method.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
InitializeLifetimeService	InitializeLifetimeService method.
IsPropertyEditable	IsPropertyEditable method.
IsPropertyVisible	IsPropertyVisible method.
PropertyByAPIName	Get a property by its API name.
PropertyById	PropertyById method.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
ToString	ToString method.

Properties

AttachedRefs	AttachedRefs property.
Children	Gets the list of children.
ClsId	ClsId property.
Comments	Gets the list of associated comments.
Count	Get the number of child GeometryImport instances.
DataModelObjectCategory	Gets the current DataModelObject's category.
Figures	Gets the list of associated figures.
GroupingFolder	GroupingFolder property.
IconName	IconName property.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Item	Item property.
Name	Name property.
ObjectId	ObjectId property.
ObjectState	ObjectState property.
ObjectTags	ObjectTags property.
Parent	Parent property.
Properties	Gets the list of properties for this object.
State	State property.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property GeometryImportGroup.AttachedRefs: List[int] | None

AttachedRefs property.

property GeometryImportGroup.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property GeometryImportGroup.ClsId: int | None

ClsId property.

property GeometryImportGroup.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property GeometryImportGroup.Count: int | None

Get the number of child GeometryImport instances.

property GeometryImportGroup.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property GeometryImportGroup.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property GeometryImportGroup.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

GroupingFolder property.

property GeometryImportGroup.IconName: str | None

IconName property.

property GeometryImportGroup.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property GeometryImportGroup.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSGeometryImportGroupAuto | None

Gets the internal object. For advanced usage only.

property GeometryImportGroup.Item: Ansys.ACT.Automation.Mechanical.GeometryImport | None

Item property.

property GeometryImportGroup.Name: str | None

Name property.

property GeometryImportGroup.ObjectId: int | None

ObjectId property.

property GeometryImportGroup.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None

ObjectState property.

property GeometryImportGroup.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None

ObjectTags property.

property GeometryImportGroup.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

Parent property.

property GeometryImportGroup.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property GeometryImportGroup.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None

State property.

property GeometryImportGroup.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

GeometryImportGroup.Activate() → None

Activate the current object.

GeometryImportGroup.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

GeometryImportGroup.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

GeometryImportGroup.AddGeometryImport() → Ansys.ACT.Automation.Mechanical.GeometryImport

Create the object for working with an imported part.

GeometryImportGroup.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

GeometryImportGroup.AddModelImport() → Ansys.ACT.Automation.Mechanical.ModelImport

AddModelImport method.

GeometryImportGroup.AddModelPreview() → Ansys.ACT.Automation.Mechanical.ModelPreview

AddModelPreview method.

GeometryImportGroup.CanAddGeometryImport() → bool

CanAddGeometryImport method.

GeometryImportGroup.CanAddModelImport() → bool

CanAddModelImport method.

GeometryImportGroup.CanImportModelPreview() → bool

CanImportModelPreview method.

GeometryImportGroup.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

GeometryImportGroup.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef

CreateObjRef method.

GeometryImportGroup.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

GeometryImportGroup.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

GeometryImportGroup.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool

Equals method.

GeometryImportGroup.GetAPIName(dispId: int) → str

Property name bound to dispId.

GeometryImportGroup.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]

GetAllProperties method.

GeometryImportGroup.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

GeometryImportGroup.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData

GetDetailsView method.

GeometryImportGroup.GetEnumName(enumType: type, value: int, dispId: int) → str

Enum name bound to value

GeometryImportGroup.GetEnumerator() → Iterator[Ansys.ACT.Automation.Mechanical.GeometryImport]

GetEnumerator method.

GeometryImportGroup.GetHashCode() → int

GetHashCode method.

GeometryImportGroup.GetIconFile() → System.Byte

GetIconFile method.

GeometryImportGroup.GetLifetimeService() → Any

GetLifetimeService method.

GeometryImportGroup.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None

GetObjectData method.

GeometryImportGroup.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

GeometryImportGroup.GetPath() → str

GetPath method.

GeometryImportGroup.GetPropertyName(dispId: int) → str

GetPropertyName method.

GeometryImportGroup.GetPropertyValue(name: str) → Any

GetPropertyValue method.

GeometryImportGroup.GetType() → type

GetType method.

GeometryImportGroup.GetVisibleProperties() → List[System.Reflection.PropertyInfo]

GetVisibleProperties method.

GeometryImportGroup.GetVisiblePropertyNames() → List[str]

GetVisiblePropertyNames method.

GeometryImportGroup.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

GeometryImportGroup.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

GeometryImportGroup.InitializeLifetimeService() → Any

InitializeLifetimeService method.

GeometryImportGroup.IsPropertyEditable(dispId: int) → bool

IsPropertyEditable method.

GeometryImportGroup.IsPropertyVisible(dispId: int) → bool

IsPropertyVisible method.

GeometryImportGroup.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

GeometryImportGroup.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property

PropertyById method.

GeometryImportGroup.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

GeometryImportGroup.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

GeometryImportGroup.ToString() → str

ToString method.