AutomaticMethod

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.MeshControls.AutomaticMethod(internalObject: Any)

Bases: object

Defines a AutomaticMethod.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
CopyTo	Copies all visible properties from this object to another.
CreateObjRef	CreateObjRef method.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
Equals	Equals method.
GenerateMesh	Generate the Mesh.
GetAPIName	Property name bound to dispId.
GetAllProperties	GetAllProperties method.
GetChildren	Gets the list of children, filtered by type.
GetDetailsView	GetDetailsView method.
GetEnumName	Enum name bound to value
GetHashCode	GetHashCode method.
GetIconFile	GetIconFile method.
GetLifetimeService	GetLifetimeService method.
GetObjectData	GetObjectData method.
GetParameter	Gets the parameter corresponding to the given property.
GetPath	GetPath method.
GetPropertyName	GetPropertyName method.
GetPropertyValue	GetPropertyValue method.
GetType	GetType method.
GetVisibleProperties	GetVisibleProperties method.
GetVisiblePropertyNames	GetVisiblePropertyNames method.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
InitializeLifetimeService	InitializeLifetimeService method.
IsPropertyEditable	IsPropertyEditable method.
IsPropertyVisible	IsPropertyVisible method.
PropertyByAPIName	Get a property by its API name.
PropertyById	PropertyById method.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.
ToString	ToString method.

Properties

Active	Gets the Active.
AggressiveInflateOption	Gets or sets the AggressiveInflateOption.
AggressiveTetImprovement	Gets or sets the AggressiveTetImprovement.
Algorithm	Gets or sets the Algorithm.
ApproximativeNumberOfElementsPerPart	Gets or sets the ApproximativeNumberOfElementsPerPart.
AttachedRefs	AttachedRefs property.
AutoCollapseShortEdges	Gets or sets the AutoCollapseShortEdges.
AutoPinchFaces	Gets or sets the AutoPinchFaces.
AutoPinchTolerance	Gets or sets the AutoPinchTolerance.
AutoRemoveThinFaces	Gets or sets the AutoRemoveThinFaces.
AutoRepairFeatureAngle	Gets or sets the AutoRepairFeatureAngle.
AutoRepairPartialDefeature	Gets or sets the use of partial defeature, which partially removes thin faces and sharp angles within provided tolerances, such that only topology impacting mesh quality is removed.
AutoSharpAngle	Gets or sets the AutoSharpAngle.
AutoShortEdgeLength	Gets or sets the AutoShortEdgeLength.
AutoThinFaceWidth	Gets or sets the AutoThinFaceWidth.
AutomaticNodeMovement	Gets or sets the AutomaticNodeMovement method under PCTet.
BFCartSubType	Gets the BFCartSubType.
BFCartTolerance	Gets the BFCartTolerance.
BodyStackingType	Gets or sets the BodyStackingType.
CartSweepSpacingOption	Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points).
CartesianSize	Gets or sets the CartesianSize in Multizone.
Children	Gets the list of children.
Clearence	Gets or sets the Clearence.
ClsId	ClsId property.
Comments	Gets the list of associated comments.
ConstrainBoundary	Gets or sets the ConstrainBoundary.
ControlMessages	Gets the ControlMessages.
CoordinateSystem	Gets or sets the CoordinateSystem.
CornerAngle	Gets or sets the CornerAngle.
CurvatureNormalAngle	Gets or sets the CurvatureNormalAngle.
DataModelObjectCategory	Gets the current DataModelObject's category.
DecompositionType	Gets or sets the DecompositionType in Multizone.
DefeatureLayerVolume	Gets or sets the DefeatureLayerVolume.
DefeaturingTolerance	Gets or sets the DefeaturingTolerance.
DefinedBy	Gets or sets the DefinedBy.
ElementMidsideNodes	Gets or sets the ElementMidsideNodes.
ElementOption	Gets or sets the ElementOption.
ElementOrder	Gets or sets the ElementOrder.
FaceProximityGapFactor	Gets or sets the FaceProximityGapFactor for PCTet.
FallBackMeshType	Gets or sets the FallBackMeshType.
FeatureAngle	Gets or sets the FeatureAngle.
FeatureProtectionAngle	Gets or sets the DihedralAngle for AutoNodeMove under PCTet.
Figures	Gets the list of associated figures.
FilletCollapse	Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ).
FillingDirection	Gets or sets the FillingDirection.
FillingFraction	Gets or sets the FillingFraction.
FreeFaceMeshType	Gets or sets the FreeFaceMeshType.
FreeMeshType	Gets or sets the FreeMeshType.
GenerateLayersUsingFacets	Gets or sets the GenerateLayersUsingFacets.
GroupingFolder	GroupingFolder property.
IconName	IconName property.
Images	Gets the list of associated images.
ImprovementIterations	Gets or sets the ImprovementIterations for AutoNodeMove under PCTet.
InflateRelativeTolerance	Gets or sets the InflateRelativeTolerance.
InternalObject	Gets the internal object. For advanced usage only.
KeyPointsSelection	Gets or sets the KeyPointsSelection.
KeyPointsTolerance	Gets or sets the KeyPoints Tolerance in Multizone.
LateralDefeatureSize	Gets or sets the LateralDefeatureSize.
LayerHeight	Gets or sets the LayerHeight.
LayerStart	Gets or sets the LayerStart.
Location	Gets or sets the Location.
MZSweepNumberDivisions
MappedSweptType	Gets or sets the MappedSweptType.
MatchMeshWherePossible	Gets or sets the MatchMeshWherePossible.
MaximumElementSize	Gets or sets the MaximumElementSize.
MeshBasedDefeaturing	Gets or sets the MeshBasedDefeaturing.
MeshFlowControl	Gets or sets the MeshFlowControl.
MeshInCenter	Gets or sets the MeshInCenter.
MeshType	Gets or sets the MeshType.
MeshUsingVoxelization	Gets or sets the MeshUsingVoxelization.
Method	Gets or sets the Method.
MinimumEdgeLength	Gets the MinimumEdgeLength.
MinimumSizeLimit	Gets or sets the MinimumSizeLimit.
MinimumThickness	Gets or sets the MinimumThickness for PCTet.
MultiZoneEnableSmoothing	Gets or sets whether to enable smoothing for the MultiZone mesh.
Name	Name property.
NamedSelection	Gets or sets the NamedSelection.
NumberOfCellsAcrossGap	Gets or sets the NumberOfCellsAcrossGap.
NumberOfElementLayers	Gets or sets the NumberOfElementLayers for PCTet.
ObjectId	ObjectId property.
ObjectState	ObjectState property.
ObjectTags	ObjectTags property.
OverlappingAngle	Gets or sets the OverlappingAngle.
Parent	Parent property.
PartialFill	Gets or sets the PartialFill.
ParticleCoordinateSystem	Gets or sets the ParticleCoordinateSystem.
ParticleDiameter	Gets or sets the ParticleDiameter.
PreserveBoundaries	Gets or sets the PreserveBoundaries.
PrimeMethodAutoRepair	Gets or sets the PrimeMethodAutoRepair.
PrimeRepairTolerance	Gets or sets repair tolerance length for Prime meshing. This can be used to reduce variability of output topology, prevent the collapse and defeature of thin or short topologies, and allow the creation of a coarse mesh while keeping topology as-is.
ProjectCornersToTop	Gets or sets the ProjectCornersToTop.
ProjectInConstantZPlane	Gets or sets the ProjectInConstantZPlane.
ProjectionFactor	Gets or sets the ProjectionFactor.
Properties	Gets the list of properties for this object.
RadialGrowthRate	Gets or sets the RadialGrowthRate.
RefineAtThinSection	Gets or sets the RefineAtThinSection for PCTet.
RefineSurfaceMesh	Gets or sets the RefineSurfaceMesh for PCTet.
Refinement	Gets or sets the Refinement.
RelativeTolerance	Gets or sets the PrimeRelativeTolerance.
RemoveSharpAngleFaces	Gets or sets the RemoveSharpAngleFaces.
RepairFacets	Gets or sets the RepairFacets.
RestrictNodeMovementsToSurface	Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet.
ReuseBlocking	Gets or sets the ReuseBlocking.
ScopingMethod	Gets or sets the ScopingMethod.
ShowAdvancedImproveOptions	Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet.
SlicerFeatureAngle	Gets or sets the SlicerFeatureAngle.
SliverTriangleHeight	Gets or sets the SliverTriangleHeight.
SmoothMeshSpacing	Gets or sets the SmoothMeshSpacing in Multizone.
SmoothTransition	Gets or sets the SmoothTransition.
SolidShellElementForStacker	Gets or sets the SolidShellElementForStacker.
SolidShellElementForStackerGeometrySelection	Gets or sets the SolidShellElementForStackerGeometrySelection.
SolidShellElementForStackerNamedSelection	Gets or sets the SolidShellElementForStackerNamedSelection.
SolidShellElementForStackerScopingMethod	Gets or sets the SolidShellElementForStackerScopingMethod.
SourceLocation	Gets or sets the SourceLocation.
SourceTargetSelection	Gets or sets the SourceTargetSelection.
SpacingOption	Gets or sets the SpacingOption.
SplitAngle	Gets or sets the SplitAngle in Multizone.
SrcTrgNamedSelection	Sets Named selection as Source/Target for MultiZone control.
SrcTrgScopingMethod	Sets Scoping method for Source/Target selection for MultiZone control.
StackerCoordinateSystem	Gets or sets the StackerCoordinateSystem.
StackerFreeFaceMeshType	Gets or sets the StackerFreeFaceMeshType.
StackerTriangleReduction	Gets or sets the StackerTriangleReduction.
StackingAxis	Gets or sets the StackingAxis.
StackingDefeatureSize	Gets or sets the StackingDefeatureSize.
State	State property.
StretchFactorX	Gets or sets the StretchFactorX.
StretchFactorY	Gets or sets the StretchFactorY.
StretchFactorZ	Gets or sets the StretchFactorZ.
SubsampleRate	Gets or sets the SubsampleRate.
Suppressed	Gets or sets the Suppressed.
SurfaceMeshMethod	Gets or sets the SurfaceMeshMethod.
SweepBiasType	Gets or sets the SweepBiasType.
SweepBiasValue	Gets or sets the SweepBiasValue.
SweepESizeType	Gets or sets the SweepESizeType.
SweepEdges	Gets or sets the SweepEdges.
SweepElementSize	Gets or sets the SweepElementSize.
SweepNumberDivisions	Gets or sets the SweepNumberDivisions.
SweepSizeBehavior	Gets or sets the SweepSizeBehavior.
SweepThickness	Gets or sets the SweepThickness in Multizone.
TargetLocation	Gets or sets the TargetLocation.
TetraGrowthRate	Gets or sets the TetraGrowthRate.
TriangleReduction	Gets or sets the TriangleReduction.
UseMultiZoneFreezeInflationLayers	Gets or sets whether to freeze inflation layers for the MultiZone mesh.
UseSplitAngle	Gets or sets the UseSplitAngle in Multizone.
VisibleProperties	Gets the list of properties that are visible for this object.
WallThickness	Gets or sets the WallThickness.
WriteICEMCFDFiles	Gets or sets the WriteICEMCFDFiles.

Property detail

property AutomaticMethod.Active: bool | None

Gets the Active.

property AutomaticMethod.AggressiveInflateOption: bool | None

Gets or sets the AggressiveInflateOption.

property AutomaticMethod.AggressiveTetImprovement: bool | None

Gets or sets the AggressiveTetImprovement.

property AutomaticMethod.Algorithm: Ansys.Mechanical.DataModel.Enums.MeshMethodAlgorithm | None

Gets or sets the Algorithm.

property AutomaticMethod.ApproximativeNumberOfElementsPerPart: int | None

Gets or sets the ApproximativeNumberOfElementsPerPart.

property AutomaticMethod.AttachedRefs: List[int] | None

AttachedRefs property.

property AutomaticMethod.AutoCollapseShortEdges: Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the AutoCollapseShortEdges.

property AutomaticMethod.AutoPinchFaces: Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the AutoPinchFaces.

property AutomaticMethod.AutoPinchTolerance: Ansys.Core.Units.Quantity | None

Gets or sets the AutoPinchTolerance.

property AutomaticMethod.AutoRemoveThinFaces: Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the AutoRemoveThinFaces.

property AutomaticMethod.AutoRepairFeatureAngle: Ansys.Core.Units.Quantity | None

Gets or sets the AutoRepairFeatureAngle.

property AutomaticMethod.AutoRepairPartialDefeature: Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the use of partial defeature, which partially removes thin faces and sharp angles within provided tolerances, such that only topology impacting mesh quality is removed.

property AutomaticMethod.AutoSharpAngle: Ansys.Core.Units.Quantity | None

Gets or sets the AutoSharpAngle.

property AutomaticMethod.AutoShortEdgeLength: Ansys.Core.Units.Quantity | None

Gets or sets the AutoShortEdgeLength.

property AutomaticMethod.AutoThinFaceWidth: Ansys.Core.Units.Quantity | None

Gets or sets the AutoThinFaceWidth.

property AutomaticMethod.AutomaticNodeMovement: Ansys.Mechanical.DataModel.Enums.AutomaticNodeMovementMethod | None

Gets or sets the AutomaticNodeMovement method under PCTet.

property AutomaticMethod.BFCartSubType: int | None

Gets the BFCartSubType.

property AutomaticMethod.BFCartTolerance: Ansys.Core.Units.Quantity | None

Gets the BFCartTolerance.

property AutomaticMethod.BodyStackingType: Ansys.Mechanical.DataModel.Enums.BodyStackingType | None

Gets or sets the BodyStackingType.

property AutomaticMethod.CartSweepSpacingOption: int | None

Gets or sets the CartSweep SpacingOption in Multizone ( 0 = Uniform, 1 = Key-Points).

property AutomaticMethod.CartesianSize: Ansys.Core.Units.Quantity | None

Gets or sets the CartesianSize in Multizone.

property AutomaticMethod.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property AutomaticMethod.Clearence: Ansys.Core.Units.Quantity | None

Gets or sets the Clearence.

property AutomaticMethod.ClsId: int | None

ClsId property.

property AutomaticMethod.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property AutomaticMethod.ConstrainBoundary: bool | None

Gets or sets the ConstrainBoundary.

property AutomaticMethod.ControlMessages: bool | None

Gets the ControlMessages.

property AutomaticMethod.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the CoordinateSystem.

property AutomaticMethod.CornerAngle: Ansys.Core.Units.Quantity | None

Gets or sets the CornerAngle.

property AutomaticMethod.CurvatureNormalAngle: Ansys.Core.Units.Quantity | None

Gets or sets the CurvatureNormalAngle.

property AutomaticMethod.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property AutomaticMethod.DecompositionType: Ansys.Mechanical.DataModel.Enums.DecompositionType | None

Gets or sets the DecompositionType in Multizone.

property AutomaticMethod.DefeatureLayerVolume: float | None

Gets or sets the DefeatureLayerVolume.

property AutomaticMethod.DefeaturingTolerance: Ansys.Core.Units.Quantity | None

Gets or sets the DefeaturingTolerance.

property AutomaticMethod.DefinedBy: Ansys.Mechanical.DataModel.Enums.PatchIndependentDefineType | None

Gets or sets the DefinedBy.

property AutomaticMethod.ElementMidsideNodes: Ansys.Mechanical.DataModel.Enums.ElementMidsideNodesType | None

Gets or sets the ElementMidsideNodes.

property AutomaticMethod.ElementOption: Ansys.Mechanical.DataModel.Enums.SweepElementOptionType | None

Gets or sets the ElementOption.

property AutomaticMethod.ElementOrder: Ansys.Mechanical.DataModel.Enums.ElementOrder | None

Gets or sets the ElementOrder.

property AutomaticMethod.FaceProximityGapFactor: float | None

Gets or sets the FaceProximityGapFactor for PCTet.

property AutomaticMethod.FallBackMeshType: Ansys.Mechanical.DataModel.Enums.SweepAxisymmetricFallBackMeshType | None

Gets or sets the FallBackMeshType.

property AutomaticMethod.FeatureAngle: Ansys.Core.Units.Quantity | None

Gets or sets the FeatureAngle.

property AutomaticMethod.FeatureProtectionAngle: Ansys.Core.Units.Quantity | None

Gets or sets the DihedralAngle for AutoNodeMove under PCTet.

property AutomaticMethod.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property AutomaticMethod.FilletCollapse: int | None

Gets or sets the FilletCollapse for AutoNodeMove under PCTet ( 0 = No, 1 = ProgramControlled ).

property AutomaticMethod.FillingDirection: Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None

Gets or sets the FillingDirection.

property AutomaticMethod.FillingFraction: float | None

Gets or sets the FillingFraction.

property AutomaticMethod.FreeFaceMeshType: int | None

Gets or sets the FreeFaceMeshType.

property AutomaticMethod.FreeMeshType: int | None

Gets or sets the FreeMeshType.

property AutomaticMethod.GenerateLayersUsingFacets: bool | None

Gets or sets the GenerateLayersUsingFacets.

property AutomaticMethod.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

GroupingFolder property.

property AutomaticMethod.IconName: str | None

IconName property.

property AutomaticMethod.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property AutomaticMethod.ImprovementIterations: int | None

Gets or sets the ImprovementIterations for AutoNodeMove under PCTet.

property AutomaticMethod.InflateRelativeTolerance: float | None

Gets or sets the InflateRelativeTolerance.

property AutomaticMethod.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSMeshControlAuto | None

Gets the internal object. For advanced usage only.

property AutomaticMethod.KeyPointsSelection: Ansys.Mechanical.DataModel.Enums.AutomaticOrManual | None

Gets or sets the KeyPointsSelection.

property AutomaticMethod.KeyPointsTolerance: Ansys.Core.Units.Quantity | None

Gets or sets the KeyPoints Tolerance in Multizone.

property AutomaticMethod.LateralDefeatureSize: float | None

Gets or sets the LateralDefeatureSize.

property AutomaticMethod.LayerHeight: float | None

Gets or sets the LayerHeight.

property AutomaticMethod.LayerStart: float | None

Gets or sets the LayerStart.

property AutomaticMethod.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property AutomaticMethod.MZSweepNumberDivisions: int | None

property AutomaticMethod.MappedSweptType: int | None

Gets or sets the MappedSweptType.

property AutomaticMethod.MatchMeshWherePossible: bool | None

Gets or sets the MatchMeshWherePossible.

property AutomaticMethod.MaximumElementSize: Ansys.Core.Units.Quantity | None

Gets or sets the MaximumElementSize.

property AutomaticMethod.MeshBasedDefeaturing: bool | None

Gets or sets the MeshBasedDefeaturing.

property AutomaticMethod.MeshFlowControl: Ansys.Mechanical.DataModel.Enums.MeshFlowControlMethod | None

Gets or sets the MeshFlowControl.

property AutomaticMethod.MeshInCenter: int | None

Gets or sets the MeshInCenter.

property AutomaticMethod.MeshType: Ansys.Mechanical.DataModel.Enums.MethodMeshType | None

Gets or sets the MeshType.

property AutomaticMethod.MeshUsingVoxelization: bool | None

Gets or sets the MeshUsingVoxelization.

property AutomaticMethod.Method: Ansys.Mechanical.DataModel.Enums.MethodType | None

Gets or sets the Method.

property AutomaticMethod.MinimumEdgeLength: Ansys.Core.Units.Quantity | None

Gets the MinimumEdgeLength.

property AutomaticMethod.MinimumSizeLimit: Ansys.Core.Units.Quantity | None

Gets or sets the MinimumSizeLimit.

property AutomaticMethod.MinimumThickness: Ansys.Core.Units.Quantity | None

Gets or sets the MinimumThickness for PCTet.

property AutomaticMethod.MultiZoneEnableSmoothing: bool | None

Gets or sets whether to enable smoothing for the MultiZone mesh.

An exception is thrown when attempting to access this property when Method is not set to MultiZone.

Default: False

property AutomaticMethod.Name: str | None

Name property.

property AutomaticMethod.NamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None

Gets or sets the NamedSelection.

property AutomaticMethod.NumberOfCellsAcrossGap: int | None

Gets or sets the NumberOfCellsAcrossGap.

property AutomaticMethod.NumberOfElementLayers: int | None

Gets or sets the NumberOfElementLayers for PCTet.

property AutomaticMethod.ObjectId: int | None

ObjectId property.

property AutomaticMethod.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None

ObjectState property.

property AutomaticMethod.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None

ObjectTags property.

property AutomaticMethod.OverlappingAngle: Ansys.Core.Units.Quantity | None

Gets or sets the OverlappingAngle.

property AutomaticMethod.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

Parent property.

property AutomaticMethod.PartialFill: bool | None

Gets or sets the PartialFill.

property AutomaticMethod.ParticleCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the ParticleCoordinateSystem.

property AutomaticMethod.ParticleDiameter: Ansys.Core.Units.Quantity | None

Gets or sets the ParticleDiameter.

property AutomaticMethod.PreserveBoundaries: int | None

Gets or sets the PreserveBoundaries.

property AutomaticMethod.PrimeMethodAutoRepair: Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the PrimeMethodAutoRepair.

property AutomaticMethod.PrimeRepairTolerance: Ansys.Core.Units.Quantity | None

Gets or sets repair tolerance length for Prime meshing. This can be used to reduce variability of output topology, prevent the collapse and defeature of thin or short topologies, and allow the creation of a coarse mesh while keeping topology as-is.

property AutomaticMethod.ProjectCornersToTop: bool | None

Gets or sets the ProjectCornersToTop.

property AutomaticMethod.ProjectInConstantZPlane: bool | None

Gets or sets the ProjectInConstantZPlane.

property AutomaticMethod.ProjectionFactor: float | None

Gets or sets the ProjectionFactor.

property AutomaticMethod.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property AutomaticMethod.RadialGrowthRate: float | None

Gets or sets the RadialGrowthRate.

property AutomaticMethod.RefineAtThinSection: bool | None

Gets or sets the RefineAtThinSection for PCTet.

property AutomaticMethod.RefineSurfaceMesh: bool | None

Gets or sets the RefineSurfaceMesh for PCTet.

property AutomaticMethod.Refinement: int | None

Gets or sets the Refinement.

property AutomaticMethod.RelativeTolerance: float | None

Gets or sets the PrimeRelativeTolerance.

property AutomaticMethod.RemoveSharpAngleFaces: Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the RemoveSharpAngleFaces.

property AutomaticMethod.RepairFacets: bool | None

Gets or sets the RepairFacets.

property AutomaticMethod.RestrictNodeMovementsToSurface: bool | None

Gets or sets the RestrictNodeMovementsToSurface for AutoNodeMove under PCTet.

property AutomaticMethod.ReuseBlocking: bool | None

Gets or sets the ReuseBlocking.

property AutomaticMethod.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ScopingMethod.

property AutomaticMethod.ShowAdvancedImproveOptions: bool | None

Gets or sets the ShowAdvancedImproveOptions for AutoNodeMove under PCTet.

property AutomaticMethod.SlicerFeatureAngle: float | None

Gets or sets the SlicerFeatureAngle.

property AutomaticMethod.SliverTriangleHeight: float | None

Gets or sets the SliverTriangleHeight.

property AutomaticMethod.SmoothMeshSpacing: bool | None

Gets or sets the SmoothMeshSpacing in Multizone.

property AutomaticMethod.SmoothTransition: bool | None

Gets or sets the SmoothTransition.

property AutomaticMethod.SolidShellElementForStacker: Ansys.Mechanical.DataModel.Enums.YesNoType | None

Gets or sets the SolidShellElementForStacker.

property AutomaticMethod.SolidShellElementForStackerGeometrySelection: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the SolidShellElementForStackerGeometrySelection.

property AutomaticMethod.SolidShellElementForStackerNamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None

Gets or sets the SolidShellElementForStackerNamedSelection.

property AutomaticMethod.SolidShellElementForStackerScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the SolidShellElementForStackerScopingMethod.

property AutomaticMethod.SourceLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the SourceLocation.

property AutomaticMethod.SourceTargetSelection: int | None

Gets or sets the SourceTargetSelection.

property AutomaticMethod.SpacingOption: int | None

Gets or sets the SpacingOption.

property AutomaticMethod.SplitAngle: Ansys.Core.Units.Quantity | None

Gets or sets the SplitAngle in Multizone.

property AutomaticMethod.SrcTrgNamedSelection: Ansys.ACT.Automation.Mechanical.NamedSelection | None

Sets Named selection as Source/Target for MultiZone control.

property AutomaticMethod.SrcTrgScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Sets Scoping method for Source/Target selection for MultiZone control.

property AutomaticMethod.StackerCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the StackerCoordinateSystem.

property AutomaticMethod.StackerFreeFaceMeshType: Ansys.Mechanical.DataModel.Enums.StackerMethodMeshType | None

Gets or sets the StackerFreeFaceMeshType.

property AutomaticMethod.StackerTriangleReduction: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None

Gets or sets the StackerTriangleReduction.

property AutomaticMethod.StackingAxis: Ansys.Mechanical.DataModel.Enums.CoordinateSystemAxisType | None

Gets or sets the StackingAxis.

property AutomaticMethod.StackingDefeatureSize: float | None

Gets or sets the StackingDefeatureSize.

property AutomaticMethod.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None

State property.

property AutomaticMethod.StretchFactorX: float | None

Gets or sets the StretchFactorX.

property AutomaticMethod.StretchFactorY: float | None

Gets or sets the StretchFactorY.

property AutomaticMethod.StretchFactorZ: float | None

Gets or sets the StretchFactorZ.

property AutomaticMethod.SubsampleRate: int | None

Gets or sets the SubsampleRate.

property AutomaticMethod.Suppressed: bool | None

Gets or sets the Suppressed.

property AutomaticMethod.SurfaceMeshMethod: int | None

Gets or sets the SurfaceMeshMethod.

property AutomaticMethod.SweepBiasType: Ansys.Mechanical.DataModel.Enums.BiasType | None

Gets or sets the SweepBiasType.

property AutomaticMethod.SweepBiasValue: float | None

Gets or sets the SweepBiasValue.

property AutomaticMethod.SweepESizeType: int | None

Gets or sets the SweepESizeType.

property AutomaticMethod.SweepEdges: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the SweepEdges.

property AutomaticMethod.SweepElementSize: Ansys.Core.Units.Quantity | None

Gets or sets the SweepElementSize.

property AutomaticMethod.SweepNumberDivisions: int | None

Gets or sets the SweepNumberDivisions.

property AutomaticMethod.SweepSizeBehavior: int | None

Gets or sets the SweepSizeBehavior.

property AutomaticMethod.SweepThickness: Ansys.Core.Units.Quantity | None

Gets or sets the SweepThickness in Multizone.

property AutomaticMethod.TargetLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the TargetLocation.

property AutomaticMethod.TetraGrowthRate: float | None

Gets or sets the TetraGrowthRate.

property AutomaticMethod.TriangleReduction: Ansys.Mechanical.DataModel.Enums.TriangleReduction | None

Gets or sets the TriangleReduction.

property AutomaticMethod.UseMultiZoneFreezeInflationLayers: bool | None

Gets or sets whether to freeze inflation layers for the MultiZone mesh.

An exception is thrown when attempting to access this property when Method is not set to MultiZone or when MultiZoneEnableSmoothing is false.

Default: True

property AutomaticMethod.UseSplitAngle: bool | None

Gets or sets the UseSplitAngle in Multizone.

property AutomaticMethod.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property AutomaticMethod.WallThickness: Ansys.Core.Units.Quantity | None

Gets or sets the WallThickness.

property AutomaticMethod.WriteICEMCFDFiles: bool | None

Gets or sets the WriteICEMCFDFiles.

Method detail

AutomaticMethod.Activate() → None

Activate the current object.

AutomaticMethod.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

AutomaticMethod.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

AutomaticMethod.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

AutomaticMethod.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

AutomaticMethod.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef

CreateObjRef method.

AutomaticMethod.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

AutomaticMethod.Delete() → None

Run the Delete action.

AutomaticMethod.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

AutomaticMethod.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool

Equals method.

AutomaticMethod.GenerateMesh() → None

Generate the Mesh.

AutomaticMethod.GetAPIName(dispId: int) → str

Property name bound to dispId.

AutomaticMethod.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]

GetAllProperties method.

AutomaticMethod.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

AutomaticMethod.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData

GetDetailsView method.

AutomaticMethod.GetEnumName(enumType: type, value: int, dispId: int) → str

Enum name bound to value

AutomaticMethod.GetHashCode() → int

GetHashCode method.

AutomaticMethod.GetIconFile() → System.Byte

GetIconFile method.

AutomaticMethod.GetLifetimeService() → Any

GetLifetimeService method.

AutomaticMethod.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None

GetObjectData method.

AutomaticMethod.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

AutomaticMethod.GetPath() → str

GetPath method.

AutomaticMethod.GetPropertyName(dispId: int) → str

GetPropertyName method.

AutomaticMethod.GetPropertyValue(name: str) → Any

GetPropertyValue method.

AutomaticMethod.GetType() → type

GetType method.

AutomaticMethod.GetVisibleProperties() → List[System.Reflection.PropertyInfo]

GetVisibleProperties method.

AutomaticMethod.GetVisiblePropertyNames() → List[str]

GetVisiblePropertyNames method.

AutomaticMethod.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

AutomaticMethod.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

AutomaticMethod.InitializeLifetimeService() → Any

InitializeLifetimeService method.

AutomaticMethod.IsPropertyEditable(dispId: int) → bool

IsPropertyEditable method.

AutomaticMethod.IsPropertyVisible(dispId: int) → bool

IsPropertyVisible method.

AutomaticMethod.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

AutomaticMethod.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property

PropertyById method.

AutomaticMethod.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

AutomaticMethod.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

AutomaticMethod.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.

AutomaticMethod.ToString() → str

ToString method.