CondensedGeometry

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.CondensedGeometry(internalObject: Any)

Bases: object

Defines a CondensedGeometry.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddCondensedPart	Creates a new CondensedPart
AddCondensedPartInfoTool	Creates a new CondensedPartInfoTool
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
AddImportedCondensedPart	Creates a new ImportedCondensedPart
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateAutomaticCondensedParts	Run the CreateAutomaticCondensedParts action.
CreateObjRef	CreateObjRef method.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
Equals	Equals method.
GenerateCondensedGeometry	GenerateCondensedGeometry method.
GenerateCondensedParts	Run the GenerateCondensedParts action.
GetAPIName	Property name bound to dispId.
GetAllProperties	GetAllProperties method.
GetChildren	Gets the list of children, filtered by type.
GetDetailsView	GetDetailsView method.
GetEnumName	Enum name bound to value
GetHashCode	GetHashCode method.
GetIconFile	GetIconFile method.
GetLifetimeService	GetLifetimeService method.
GetObjectData	GetObjectData method.
GetParameter	Gets the parameter corresponding to the given property.
GetPath	GetPath method.
GetPropertyName	GetPropertyName method.
GetPropertyValue	GetPropertyValue method.
GetType	GetType method.
GetVisibleProperties	GetVisibleProperties method.
GetVisiblePropertyNames	GetVisiblePropertyNames method.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
InitializeLifetimeService	InitializeLifetimeService method.
IsPropertyEditable	IsPropertyEditable method.
IsPropertyVisible	IsPropertyVisible method.
PropertyByAPIName	Get a property by its API name.
PropertyById	PropertyById method.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
ToString	ToString method.

Properties

AttachedRefs	AttachedRefs property.
Children	Gets the list of children.
ClsId	ClsId property.
Comments	Gets the list of associated comments.
DataModelObjectCategory	Gets the current DataModelObject's category.
Figures	Gets the list of associated figures.
GroupingFolder	GroupingFolder property.
IconName	IconName property.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Name	Name property.
ObjectId	ObjectId property.
ObjectState	ObjectState property.
ObjectTags	ObjectTags property.
Parent	Parent property.
Properties	Gets the list of properties for this object.
SolverFilesDirectory	Gets the SolverFilesDirectory.
State	State property.
TransparencyEnabled	Gets or sets the TransparencyEnabled.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property CondensedGeometry.AttachedRefs: List[int] | None

AttachedRefs property.

property CondensedGeometry.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property CondensedGeometry.ClsId: int | None

ClsId property.

property CondensedGeometry.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property CondensedGeometry.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property CondensedGeometry.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property CondensedGeometry.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

GroupingFolder property.

property CondensedGeometry.IconName: str | None

IconName property.

property CondensedGeometry.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property CondensedGeometry.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSCondensedGeometryAuto | None

Gets the internal object. For advanced usage only.

property CondensedGeometry.Name: str | None

Name property.

property CondensedGeometry.ObjectId: int | None

ObjectId property.

property CondensedGeometry.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None

ObjectState property.

property CondensedGeometry.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None

ObjectTags property.

property CondensedGeometry.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

Parent property.

property CondensedGeometry.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property CondensedGeometry.SolverFilesDirectory: str | None

Gets the SolverFilesDirectory.

property CondensedGeometry.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None

State property.

property CondensedGeometry.TransparencyEnabled: bool | None

Gets or sets the TransparencyEnabled.

property CondensedGeometry.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

CondensedGeometry.Activate() → None

Activate the current object.

CondensedGeometry.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

CondensedGeometry.AddCondensedPart() → Ansys.ACT.Automation.Mechanical.CondensedPart

Creates a new CondensedPart

CondensedGeometry.AddCondensedPartInfoTool() → Ansys.ACT.Automation.Mechanical.CondensedPartInfoTool

Creates a new CondensedPartInfoTool

CondensedGeometry.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

CondensedGeometry.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

CondensedGeometry.AddImportedCondensedPart() → Ansys.ACT.Automation.Mechanical.ImportedCondensedPart

Creates a new ImportedCondensedPart

CondensedGeometry.ClearGeneratedData() → None

Run the ClearGeneratedData action.

CondensedGeometry.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

CondensedGeometry.CreateAutomaticCondensedParts() → None

Run the CreateAutomaticCondensedParts action.

CondensedGeometry.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef

CreateObjRef method.

CondensedGeometry.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

CondensedGeometry.Delete() → None

Run the Delete action.

CondensedGeometry.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

CondensedGeometry.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool

Equals method.

CondensedGeometry.GenerateCondensedGeometry() → None

GenerateCondensedGeometry method.

CondensedGeometry.GenerateCondensedParts() → None

Run the GenerateCondensedParts action.

CondensedGeometry.GetAPIName(dispId: int) → str

Property name bound to dispId.

CondensedGeometry.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]

GetAllProperties method.

CondensedGeometry.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

CondensedGeometry.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData

GetDetailsView method.

CondensedGeometry.GetEnumName(enumType: type, value: int, dispId: int) → str

Enum name bound to value

CondensedGeometry.GetHashCode() → int

GetHashCode method.

CondensedGeometry.GetIconFile() → System.Byte

GetIconFile method.

CondensedGeometry.GetLifetimeService() → Any

GetLifetimeService method.

CondensedGeometry.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None

GetObjectData method.

CondensedGeometry.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

CondensedGeometry.GetPath() → str

GetPath method.

CondensedGeometry.GetPropertyName(dispId: int) → str

GetPropertyName method.

CondensedGeometry.GetPropertyValue(name: str) → Any

GetPropertyValue method.

CondensedGeometry.GetType() → type

GetType method.

CondensedGeometry.GetVisibleProperties() → List[System.Reflection.PropertyInfo]

GetVisibleProperties method.

CondensedGeometry.GetVisiblePropertyNames() → List[str]

GetVisiblePropertyNames method.

CondensedGeometry.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

CondensedGeometry.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

CondensedGeometry.InitializeLifetimeService() → Any

InitializeLifetimeService method.

CondensedGeometry.IsPropertyEditable(dispId: int) → bool

IsPropertyEditable method.

CondensedGeometry.IsPropertyVisible(dispId: int) → bool

IsPropertyVisible method.

CondensedGeometry.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

CondensedGeometry.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property

PropertyById method.

CondensedGeometry.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

CondensedGeometry.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

CondensedGeometry.ToString() → str

ToString method.