`MeshWorkflowGroup`#

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.MeshWorkflowGroup(internalObject: Any)#

Bases: object

Defines a MeshWorkflowGroup.

Overview#

Constructors

`CallAaliCliCheckCertificatesAsync`	CallAaliCliCheckCertificatesAsync method.
`CallAaliCliCheckConfiguredAsync`	CallAaliCliCheckConfiguredAsync method.
`CallAaliCliGenerateCertificatesAsync`	CallAaliCliGenerateCertificatesAsync method.
`CallAaliCliGetAPIKeyAsync`	CallAaliCliGetAPIKeyAsync method.
`CallAaliCliHeartbeatAsync`	CallAaliCliHeartbeatAsync method.
`CallAaliCliIsConfigPopulatedAsync`	CallAaliCliIsConfigPopulatedAsync method.
`CallAaliCliNoSSLStartupAsync`	CallAaliCliNoSSLStartupAsync method.
`CallAaliCliShutdownAsync`	CallAaliCliShutdownAsync method.
`CallAaliCliStartupAsync`	CallAaliCliStartupAsync method.
`CallSendWorkflowAsync`	CallSendWorkflowAsync method.
`GetAgentPortAsync`	GetAgentPortAsync method.
`GetModelsYamlAsync`	GetModelsYamlAsync method.
`LoadContextStoreAsync`	LoadContextStoreAsync method.
`SendBodiesToMeshWorkflow`	SendBodiesToMeshWorkflow method.
`SplitCamelCase`	SplitCamelCase method.
`UpdateModelsYamlAsync`	UpdateModelsYamlAsync method.
`UpdateModelsYamlFromJsonFileAsync`	Load model configuration from a JSON file and update the models.yaml

Methods

`AaliHeartBeatAsync`	AaliHeartBeatAsync method.
`AaliStandaloneQueryLifeCycleAsync`	AaliStandaloneQueryLifeCycleAsync method.
`Activate`	Activate the current object.
`AddComment`	Creates a new child Comment.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`AddMeshMetrics`	AddMeshMetrics method.
`AddMeshWorkflow`	Adds a new workflow to the “MeshWorkflowGroup” object.
`AttachStopMeshCopilotToOnTermEvent`	AttachStopMeshCopilotToOnTermEvent method.
`CheckMeshCopilotHealth`	CheckMeshCopilotHealth method.
`ClearGeneratedData`	Resets all mesh workflows completely, i.e. also the geometry scoping transferred into each mesh workflow will be reset and all inactive geometry parts/bodies will become active again. Steps, controls, and outcomes will be reset to their initial state while any user-defined property settings will remain as-is.
`ClearOutputData`	Clears all MeshWorkflowGroup generated mesh and geometry output data (for all children workflow groups transferring meshes)
`ClearOutputMeshes`	Clears all MeshWorkflowGroup generated mesh output data (for all children workflow groups transferring meshes)
`ComputeMeshQualityMetrics`	ComputeMeshQualityMetrics method.
`ConfigureMeshCopilot`	ConfigureMeshCopilot method.
`CopyTo`	Copies all visible properties from this object to another.
`CreateObjRef`	CreateObjRef method.
`CreateParameter`	Creates a new parameter for a Property.
`DeactivateHeartBeat`	DeactivateHeartBeat method.
`Delete`	Run the Delete action.
`DetachStopMeshCopilotToOnTermEvent`	DetachStopMeshCopilotToOnTermEvent method.
`Duplicate`	Creates a copy of the current DataModelObject.
`Equals`	Equals method.
`GenerateWorkflows`	Generates all mesh workflows, i.e. executes the “Input”, the “Steps”, and the “Output” as needed.
`GetAPIName`	Property name bound to dispId.
`GetAllProperties`	GetAllProperties method.
`GetApplicableMeshMetrics`	GetApplicableMeshMetrics method.
`GetChildren`	Gets the list of children, filtered by type.
`GetDetailsView`	GetDetailsView method.
`GetEnumName`	Enum name bound to value
`GetHashCode`	GetHashCode method.
`GetIconFile`	GetIconFile method.
`GetLifetimeService`	GetLifetimeService method.
`GetMeshMetrics`	GetMeshMetrics method.
`GetMeshQualityTabIndex`	GetMeshQualityTabIndex method.
`GetMetricName`	GetMetricName method.
`GetObjectData`	GetObjectData method.
`GetParameter`	Gets the parameter corresponding to the given property.
`GetPath`	GetPath method.
`GetPropertyName`	GetPropertyName method.
`GetPropertyValue`	GetPropertyValue method.
`GetScopePatternOfMetrics`	GetScopePatternOfMetrics method.
`GetScopeTypeOfMetrics`	GetScopeTypeOfMetrics method.
`GetSheetQuantityTypeString`	Get quantity type of sheet metric from mesh metric type
`GetSolidMeshMetrics`	GetSolidMeshMetrics method.
`GetSolidMeshQualityState`	Get the state of solid mesh quality worksheet tab
`GetSolidSurfaceMeshMetrics`	GetSolidSurfaceMeshMetrics method.
`GetSolidSurfaceMeshQualityErrorLimit`	Get Mesh Quality Error Limit
`GetSolidSurfaceMeshQualityErrorLimitIsDefault`	Get SolidSurface Mesh Quality Worksheet Error Limit is Default
`GetSolidSurfaceMeshQualityName`	Get Mesh Quality Name
`GetSolidSurfaceMeshQualityState`	Get the state of solid surface mesh quality worksheet tab
`GetSolidSurfaceMeshQualityWarningLimit`	Get Mesh Quality Warning Limit
`GetSolidSurfaceMeshQualityWarningLimitIsDefault`	Get SolidSurface Mesh Quality Worksheet Warning Limit is Default
`GetSolidSurfaceMeshQualityWorstMetricBackgroundColor`	Get Mesh Quality Worst Metric BackgroundColor
`GetSolidSurfaceMeshQualityWorstMetricTooltip`	Get Mesh Quality Worst Metric Tooltip
`GetSolidSurfaceMeshQualityWorstMetricValue`	Get Mesh Quality Worst Metric Value
`GetSolidSurfaceQuantityTypeString`	Get Quantity type from SolidSurface mesh metric type
`GetSurfaceMeshMetrics`	GetSurfaceMeshMetrics method.
`GetSurfaceMeshQualityErrorLimit`	Get User Mesh Quality Error Limit
`GetSurfaceMeshQualityErrorLimitIsDefault`	Get Mesh Quality Error Limit is default
`GetSurfaceMeshQualityName`	GetSurfaceMeshQualityName method.
`GetSurfaceMeshQualityState`	Get the state of surface mesh quality worksheet tab
`GetSurfaceMeshQualityWarningLimit`	Get User Mesh Quality Warning Limit
`GetSurfaceMeshQualityWarningLimitIsDefault`	Get Mesh Quality Warning Limit is default
`GetSurfaceMeshQualityWorstMetricBackgroundColor`	Get Mesh Quality Worst Metric Background Colour
`GetSurfaceMeshQualityWorstMetricTooltip`	Get Mesh Quality Worst Metric Tooltip
`GetSurfaceMeshQualityWorstMetricValue`	Get Mesh Quality Worst Metric Value
`GetType`	GetType method.
`GetVisibleProperties`	GetVisibleProperties method.
`GetVisiblePropertyNames`	GetVisiblePropertyNames method.
`GetVolumeMeshQualityErrorLimit`	Get Mesh Quality Error Limit
`GetVolumeMeshQualityErrorLimitIsDefault`	Get Volume Mesh Quality Worksheet Error Limit is Default
`GetVolumeMeshQualityName`	Get Mesh Quality Name
`GetVolumeMeshQualityWarningLimit`	Get Mesh Quality Warning Limit
`GetVolumeMeshQualityWarningLimitIsDefault`	Get Volume Mesh Quality Worksheet Warning Limit is Default
`GetVolumeMeshQualityWorstMetricBackgroundColor`	Get Mesh Quality Worst Metric BackgroundColor
`GetVolumeMeshQualityWorstMetricTooltip`	Get Mesh Quality Worst Metric Tooltip
`GetVolumeMeshQualityWorstMetricValue`	Get Mesh Quality Worst Metric Value
`GetVolumeQuantityTypeString`	Get Quantity type from solid mesh metric type
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`InitializeLifetimeService`	InitializeLifetimeService method.
`IsPropertyEditable`	IsPropertyEditable method.
`IsPropertyVisible`	IsPropertyVisible method.
`IsSolidSurfaceMeshQualityMetricComputed`	Is Solid Surface Mesh Quality Metric Computed
`IsSurfaceMeshQualityMetricComputed`	Is Surface Mesh Quality Metric Computed
`IsVolumeMeshQualityMetricComputed`	Is Solid Mesh Quality Metric Computed
`MeshCopilotAgentOnActiveMeshWorkflow`	MeshCopilotAgentOnActiveMeshWorkflow method.
`MeshCopilotAgentOnMeshWorkflow`	MeshCopilotAgentOnMeshWorkflow method.
`PropertyByAPIName`	Get a property by its API name.
`PropertyById`	PropertyById method.
`PropertyByName`	Get a property by its unique name.
`QueryLifeCycleAsync`	QueryLifeCycleAsync method.
`RemoveMeshMetrics`	RemoveMeshMetrics method.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.
`RenameBasedOnType`	Renames applying the default name based on type.
`ResetMeshQualityMetrics`	ResetMeshQualityMetrics method.
`SetMeshQualityTabIndex`	SetMeshQualityTabIndex method.
`SetScopeOfMetrics`	SetScopeOfMetrics method.
`SetSolidSurfaceMeshQualityErrorLimit`	Set Mesh Quality Error Limit
`SetSolidSurfaceMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`SetSurfaceMeshQualityErrorLimit`	Set Mesh Quality Error Level
`SetSurfaceMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`SetVolumeMeshQualityErrorLimit`	Set Mesh Quality Error Limit
`SetVolumeMeshQualityWarningLimit`	Set Mesh Quality Warning Limit
`StartAaliWithContextDataAsync`	StartAaliWithContextDataAsync method.
`StartMeshCopilot`	StartMeshCopilot method.
`StopAaliAsync`	StopAaliAsync method.
`StopMeshCopilot`	StopMeshCopilot method.
`ToString`	ToString method.
`UpdateMeshWorkflowGroup`	Updates MeshWorkflowGroup object -> generates all need generated steps.

Properties

`ActiveWorkflow`	Gets the currently active workflow object.
`AttachedRefs`	AttachedRefs property.
`Children`	Gets the list of children.
`ClsId`	ClsId property.
`Comments`	Gets the list of associated comments.
`DataModelObjectCategory`	Gets the current DataModelObject's category.
`Figures`	Gets the list of associated figures.
`GroupingFolder`	GroupingFolder property.
`IconName`	IconName property.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`MeshWorkflowObjects`	Gets the MeshWorkflowGroup.
`Name`	Name property.
`NumberOfShellMeshQualityMetrics`	NumberOfShellMeshQualityMetrics property.
`NumberOfSolidMeshQualityMetrics`	NumberOfSolidMeshQualityMetrics property.
`NumberOfSolidSurfaceMeshQualityMetrics`	NumberOfSolidSurfaceMeshQualityMetrics property.
`ObjectId`	ObjectId property.
`ObjectState`	ObjectState property.
`ObjectTags`	ObjectTags property.
`Parent`	Parent property.
`Properties`	Gets the list of properties for this object.
`ShowPrimeMeshGeometryTessellation`	Gets or sets whether to show the PrimeMesh geometry tessellation.
`ShowPrimeMeshTessellation`	Gets or sets whether to show the PrimeMesh mesh tessellation.
`State`	State property.
`SupportedWorkflowTypes`	SupportedWorkflowTypes property.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Attributes

UUID

Property detail#

property MeshWorkflowGroup.ActiveWorkflow: Ansys.ACT.Automation.Mechanical.MeshWorkflow | None#: Gets the currently active workflow object.

property MeshWorkflowGroup.AttachedRefs: List[int] | None#: AttachedRefs property.

property MeshWorkflowGroup.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets the list of children.

property MeshWorkflowGroup.ClsId: int | None#: ClsId property.

property MeshWorkflowGroup.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#: Gets the list of associated comments.

property MeshWorkflowGroup.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#: Gets the current DataModelObject's category.

property MeshWorkflowGroup.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#: Gets the list of associated figures.

property MeshWorkflowGroup.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None#: GroupingFolder property.

property MeshWorkflowGroup.IconName: str | None#: IconName property.

property MeshWorkflowGroup.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#: Gets the list of associated images.

property MeshWorkflowGroup.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSEngineeringModelAuto | None#: Gets the internal object. For advanced usage only.

property MeshWorkflowGroup.MeshWorkflowObjects: Iterable[Ansys.ACT.Automation.Mechanical.MeshWorkflow] | None#: Gets the MeshWorkflowGroup.

property MeshWorkflowGroup.Name: str | None#: Name property.

property MeshWorkflowGroup.NumberOfShellMeshQualityMetrics: int | None#: NumberOfShellMeshQualityMetrics property.

property MeshWorkflowGroup.NumberOfSolidMeshQualityMetrics: int | None#: NumberOfSolidMeshQualityMetrics property.

property MeshWorkflowGroup.NumberOfSolidSurfaceMeshQualityMetrics: int | None#: NumberOfSolidSurfaceMeshQualityMetrics property.

property MeshWorkflowGroup.ObjectId: int | None#: ObjectId property.

property MeshWorkflowGroup.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None#: ObjectState property.

property MeshWorkflowGroup.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None#: ObjectTags property.

property MeshWorkflowGroup.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None#: Parent property.

property MeshWorkflowGroup.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties for this object.

property MeshWorkflowGroup.ShowPrimeMeshGeometryTessellation: bool | None#: Gets or sets whether to show the PrimeMesh geometry tessellation.

property MeshWorkflowGroup.ShowPrimeMeshTessellation: bool | None#: Gets or sets whether to show the PrimeMesh mesh tessellation.

property MeshWorkflowGroup.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None#: State property.

property MeshWorkflowGroup.SupportedWorkflowTypes: List[Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.WorkflowType] | None#: SupportedWorkflowTypes property.

property MeshWorkflowGroup.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties that are visible for this object.

Attribute detail#

MeshWorkflowGroup.UUID: str | None = None#

Method detail#

MeshWorkflowGroup.AaliHeartBeatAsync(cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.Collections.Generic.Dictionary[str, Any]]#: AaliHeartBeatAsync method.

MeshWorkflowGroup.AaliStandaloneQueryLifeCycleAsync(meshWorkflow: Ansys.ACT.Automation.Mechanical.MeshWorkflow, query: str, history: str, mode: str, cancellationToken: System.Threading.CancellationToken) → System.Collections.Generic.Dictionary[str, Any]#: AaliStandaloneQueryLifeCycleAsync method.

MeshWorkflowGroup.Activate() → None#: Activate the current object.

MeshWorkflowGroup.AddComment() → Ansys.ACT.Automation.Mechanical.Comment#: Creates a new child Comment.

MeshWorkflowGroup.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure#: Creates a new child Figure.

MeshWorkflowGroup.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image#

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

MeshWorkflowGroup.AddMeshMetrics(tab: Ansys.Common.Interop.DSObjectTypes.DSWorksheetTab, metricType: Ansys.Common.Interop.DSObjectTypes.DSMeshMetric) → None#: AddMeshMetrics method.

MeshWorkflowGroup.AddMeshWorkflow(type: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.WorkflowType) → Ansys.ACT.Automation.Mechanical.MeshWorkflow#: Adds a new workflow to the “MeshWorkflowGroup” object.

MeshWorkflowGroup.AttachStopMeshCopilotToOnTermEvent() → None#: AttachStopMeshCopilotToOnTermEvent method.

classmethod MeshWorkflowGroup.CallAaliCliCheckCertificatesAsync(cliPath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliCheckCertificatesAsync method.

classmethod MeshWorkflowGroup.CallAaliCliCheckConfiguredAsync(cliPath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliCheckConfiguredAsync method.

classmethod MeshWorkflowGroup.CallAaliCliGenerateCertificatesAsync(cliPath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliGenerateCertificatesAsync method.

classmethod MeshWorkflowGroup.CallAaliCliGetAPIKeyAsync(cliPath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliGetAPIKeyAsync method.

classmethod MeshWorkflowGroup.CallAaliCliHeartbeatAsync(cliPath: str, uuid: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliHeartbeatAsync method.

classmethod MeshWorkflowGroup.CallAaliCliIsConfigPopulatedAsync(cliPath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliIsConfigPopulatedAsync method.

classmethod MeshWorkflowGroup.CallAaliCliNoSSLStartupAsync(cliPath: str, uuid: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliNoSSLStartupAsync method.

classmethod MeshWorkflowGroup.CallAaliCliShutdownAsync(cliPath: str, uuid: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliShutdownAsync method.

classmethod MeshWorkflowGroup.CallAaliCliStartupAsync(cliPath: str, uuid: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallAaliCliStartupAsync method.

classmethod MeshWorkflowGroup.CallSendWorkflowAsync(cliPath: str, workflowPath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: CallSendWorkflowAsync method.

MeshWorkflowGroup.CheckMeshCopilotHealth() → str#: CheckMeshCopilotHealth method.

MeshWorkflowGroup.ClearGeneratedData() → None#: Resets all mesh workflows completely, i.e. also the geometry scoping transferred into each mesh workflow will be reset and all inactive geometry parts/bodies will become active again. Steps, controls, and outcomes will be reset to their initial state while any user-defined property settings will remain as-is.

MeshWorkflowGroup.ClearOutputData() → None#: Clears all MeshWorkflowGroup generated mesh and geometry output data (for all children workflow groups transferring meshes)

MeshWorkflowGroup.ClearOutputMeshes() → None#: Clears all MeshWorkflowGroup generated mesh output data (for all children workflow groups transferring meshes)

MeshWorkflowGroup.ComputeMeshQualityMetrics() → None#: ComputeMeshQualityMetrics method.

MeshWorkflowGroup.ConfigureMeshCopilot(jsonFilePath: str) → str#: ConfigureMeshCopilot method.

MeshWorkflowGroup.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None#: Copies all visible properties from this object to another.

MeshWorkflowGroup.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef#: CreateObjRef method.

MeshWorkflowGroup.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: Creates a new parameter for a Property.

MeshWorkflowGroup.DeactivateHeartBeat() → None#: DeactivateHeartBeat method.

MeshWorkflowGroup.Delete() → None#: Run the Delete action.

MeshWorkflowGroup.DetachStopMeshCopilotToOnTermEvent() → None#: DetachStopMeshCopilotToOnTermEvent method.

MeshWorkflowGroup.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Creates a copy of the current DataModelObject.

MeshWorkflowGroup.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool#: Equals method.

MeshWorkflowGroup.GenerateWorkflows() → None#: Generates all mesh workflows, i.e. executes the “Input”, the “Steps”, and the “Output” as needed.

MeshWorkflowGroup.GetAPIName(dispId: int) → str#: Property name bound to dispId.

classmethod MeshWorkflowGroup.GetAgentPortAsync(cliPath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: GetAgentPortAsync method.

MeshWorkflowGroup.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]#: GetAllProperties method.

MeshWorkflowGroup.GetApplicableMeshMetrics(tab: Ansys.Common.Interop.DSObjectTypes.DSWorksheetTab) → Ansys.Common.Interop.AnsCoreObjects.IAnsIntColl#: GetApplicableMeshMetrics method.

MeshWorkflowGroup.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]#: Gets the list of children, filtered by type.

MeshWorkflowGroup.GetDetailsView() → Ansys.ACT.Automation.Mechanical.DetailsViewData#: GetDetailsView method.

MeshWorkflowGroup.GetEnumName(enumType: type, value: int, dispId: int) → str#: Enum name bound to value

MeshWorkflowGroup.GetHashCode() → int#: GetHashCode method.

MeshWorkflowGroup.GetIconFile() → System.Byte#: GetIconFile method.

MeshWorkflowGroup.GetLifetimeService() → Any#: GetLifetimeService method.

MeshWorkflowGroup.GetMeshMetrics(tab: Ansys.Common.Interop.DSObjectTypes.DSWorksheetTab) → Ansys.Common.Interop.AnsCoreObjects.IAnsIntColl#: GetMeshMetrics method.

MeshWorkflowGroup.GetMeshQualityTabIndex() → int#: GetMeshQualityTabIndex method.

MeshWorkflowGroup.GetMetricName(tab: Ansys.Common.Interop.DSObjectTypes.DSWorksheetTab, meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: GetMetricName method.

classmethod MeshWorkflowGroup.GetModelsYamlAsync(cliPath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: GetModelsYamlAsync method.

MeshWorkflowGroup.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None#: GetObjectData method.

MeshWorkflowGroup.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: Gets the parameter corresponding to the given property.

MeshWorkflowGroup.GetPath() → str#: GetPath method.

MeshWorkflowGroup.GetPropertyName(dispId: int) → str#: GetPropertyName method.

MeshWorkflowGroup.GetPropertyValue(name: str) → Any#: GetPropertyValue method.

MeshWorkflowGroup.GetScopePatternOfMetrics() → str#: GetScopePatternOfMetrics method.

MeshWorkflowGroup.GetScopeTypeOfMetrics() → Ansys.Common.Interop.DSObjectTypes.EngineeringModelScopeType#: GetScopeTypeOfMetrics method.

MeshWorkflowGroup.GetSheetQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get quantity type of sheet metric from mesh metric type

MeshWorkflowGroup.GetSolidMeshMetrics() → Ansys.Common.Interop.AnsCoreObjects.IAnsIntColl#: GetSolidMeshMetrics method.

MeshWorkflowGroup.GetSolidMeshQualityState() → Ansys.Common.Interop.DSObjectTypes.DSWorksheetTabState#: Get the state of solid mesh quality worksheet tab

MeshWorkflowGroup.GetSolidSurfaceMeshMetrics() → Ansys.Common.Interop.AnsCoreObjects.IAnsIntColl#: GetSolidSurfaceMeshMetrics method.

MeshWorkflowGroup.GetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get Mesh Quality Error Limit

MeshWorkflowGroup.GetSolidSurfaceMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Get SolidSurface Mesh Quality Worksheet Error Limit is Default

MeshWorkflowGroup.GetSolidSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Mesh Quality Name

MeshWorkflowGroup.GetSolidSurfaceMeshQualityState() → Ansys.Common.Interop.DSObjectTypes.DSWorksheetTabState#: Get the state of solid surface mesh quality worksheet tab

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get Mesh Quality Warning Limit

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Get SolidSurface Mesh Quality Worksheet Warning Limit is Default

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Mesh Quality Worst Metric BackgroundColor

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Mesh Quality Worst Metric Tooltip

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get Mesh Quality Worst Metric Value

MeshWorkflowGroup.GetSolidSurfaceQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Quantity type from SolidSurface mesh metric type

MeshWorkflowGroup.GetSurfaceMeshMetrics() → Ansys.Common.Interop.AnsCoreObjects.IAnsIntColl#: GetSurfaceMeshMetrics method.

MeshWorkflowGroup.GetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get User Mesh Quality Error Limit

MeshWorkflowGroup.GetSurfaceMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Get Mesh Quality Error Limit is default

MeshWorkflowGroup.GetSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: GetSurfaceMeshQualityName method.

MeshWorkflowGroup.GetSurfaceMeshQualityState() → Ansys.Common.Interop.DSObjectTypes.DSWorksheetTabState#: Get the state of surface mesh quality worksheet tab

MeshWorkflowGroup.GetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get User Mesh Quality Warning Limit

MeshWorkflowGroup.GetSurfaceMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Get Mesh Quality Warning Limit is default

MeshWorkflowGroup.GetSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Mesh Quality Worst Metric Background Colour

MeshWorkflowGroup.GetSurfaceMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Mesh Quality Worst Metric Tooltip

MeshWorkflowGroup.GetSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get Mesh Quality Worst Metric Value

MeshWorkflowGroup.GetType() → type#: GetType method.

MeshWorkflowGroup.GetVisibleProperties() → List[System.Reflection.PropertyInfo]#: GetVisibleProperties method.

MeshWorkflowGroup.GetVisiblePropertyNames() → List[str]#: GetVisiblePropertyNames method.

MeshWorkflowGroup.GetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get Mesh Quality Error Limit

MeshWorkflowGroup.GetVolumeMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Get Volume Mesh Quality Worksheet Error Limit is Default

MeshWorkflowGroup.GetVolumeMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Mesh Quality Name

MeshWorkflowGroup.GetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get Mesh Quality Warning Limit

MeshWorkflowGroup.GetVolumeMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Get Volume Mesh Quality Worksheet Warning Limit is Default

MeshWorkflowGroup.GetVolumeMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Mesh Quality Worst Metric BackgroundColor

MeshWorkflowGroup.GetVolumeMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Mesh Quality Worst Metric Tooltip

MeshWorkflowGroup.GetVolumeMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity#: Get Mesh Quality Worst Metric Value

MeshWorkflowGroup.GetVolumeQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str#: Get Quantity type from solid mesh metric type

MeshWorkflowGroup.GroupAllSimilarChildren() → None#: Run the GroupAllSimilarChildren action.

MeshWorkflowGroup.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#: Run the GroupSimilarObjects action.

MeshWorkflowGroup.InitializeLifetimeService() → Any#: InitializeLifetimeService method.

MeshWorkflowGroup.IsPropertyEditable(dispId: int) → bool#: IsPropertyEditable method.

MeshWorkflowGroup.IsPropertyVisible(dispId: int) → bool#: IsPropertyVisible method.

MeshWorkflowGroup.IsSolidSurfaceMeshQualityMetricComputed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Is Solid Surface Mesh Quality Metric Computed

MeshWorkflowGroup.IsSurfaceMeshQualityMetricComputed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Is Surface Mesh Quality Metric Computed

MeshWorkflowGroup.IsVolumeMeshQualityMetricComputed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool#: Is Solid Mesh Quality Metric Computed

classmethod MeshWorkflowGroup.LoadContextStoreAsync(cliPath: str, context_store_path: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[str, bool, str]]#: LoadContextStoreAsync method.

MeshWorkflowGroup.MeshCopilotAgentOnActiveMeshWorkflow(query: str, mode: str, history: str) → str#: MeshCopilotAgentOnActiveMeshWorkflow method.

MeshWorkflowGroup.MeshCopilotAgentOnMeshWorkflow(workflow_id: int, query: str, mode: str, history: str) → str#: MeshCopilotAgentOnMeshWorkflow method.

MeshWorkflowGroup.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property#

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MeshWorkflowGroup.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property#: PropertyById method.

MeshWorkflowGroup.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property#: Get a property by its unique name.

MeshWorkflowGroup.QueryLifeCycleAsync(meshWorkflow: Ansys.ACT.Automation.Mechanical.MeshWorkflow, query: str, history: str, mode: str, cancellationToken: System.Threading.CancellationToken) → System.Collections.Generic.Dictionary[str, Any]#: QueryLifeCycleAsync method.

MeshWorkflowGroup.RemoveMeshMetrics(tab: Ansys.Common.Interop.DSObjectTypes.DSWorksheetTab, metricType: Ansys.Common.Interop.DSObjectTypes.DSMeshMetric) → None#: RemoveMeshMetrics method.

MeshWorkflowGroup.RemoveParameter(propName: str) → None#: Removes the parameter from the parameter set corresponding to the given property.

MeshWorkflowGroup.RenameBasedOnType() → None#: Renames applying the default name based on type.

MeshWorkflowGroup.ResetMeshQualityMetrics() → None#: ResetMeshQualityMetrics method.

classmethod MeshWorkflowGroup.SendBodiesToMeshWorkflow(type: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.WorkflowType, bodies: Iterable[Ansys.ACT.Automation.Mechanical.ImportedDataModelObject]) → Ansys.ACT.Automation.Mechanical.MeshWorkflow#: SendBodiesToMeshWorkflow method.

MeshWorkflowGroup.SetMeshQualityTabIndex(tabIndex: int) → None#: SetMeshQualityTabIndex method.

MeshWorkflowGroup.SetScopeOfMetrics(scopeType: Ansys.Common.Interop.DSObjectTypes.EngineeringModelScopeType, scopePattern: str) → None#: SetScopeOfMetrics method.

MeshWorkflowGroup.SetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None#: Set Mesh Quality Error Limit

MeshWorkflowGroup.SetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None#: Set Mesh Quality Warning Limit

MeshWorkflowGroup.SetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None#: Set Mesh Quality Error Level

MeshWorkflowGroup.SetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None#: Set Mesh Quality Warning Limit

MeshWorkflowGroup.SetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None#: Set Mesh Quality Error Limit

MeshWorkflowGroup.SetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None#: Set Mesh Quality Warning Limit

classmethod MeshWorkflowGroup.SplitCamelCase(input: str) → str#: SplitCamelCase method.

MeshWorkflowGroup.StartAaliWithContextDataAsync(jsonFilePath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.Collections.Generic.Dictionary[str, Any]]#: StartAaliWithContextDataAsync method.

MeshWorkflowGroup.StartMeshCopilot(jsonFilePath: str) → str#: StartMeshCopilot method.

MeshWorkflowGroup.StopAaliAsync(cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.Collections.Generic.Dictionary[str, Any]]#: StopAaliAsync method.

MeshWorkflowGroup.StopMeshCopilot() → str#: StopMeshCopilot method.

MeshWorkflowGroup.ToString() → str#: ToString method.

MeshWorkflowGroup.UpdateMeshWorkflowGroup() → None#: Updates MeshWorkflowGroup object -> generates all need generated steps.

classmethod MeshWorkflowGroup.UpdateModelsYamlAsync(cliPath: str, customerModelDetails: System.Collections.Generic.Dictionary[str, str], cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[Ansys.ACT.Mechanical.Application.MVC.ResponseType, str]]#: UpdateModelsYamlAsync method.

classmethod MeshWorkflowGroup.UpdateModelsYamlFromJsonFileAsync(cliPath: str, jsonFilePath: str, cancellationToken: System.Threading.CancellationToken) → System.Threading.Tasks.Task[System.ValueTuple[Ansys.ACT.Mechanical.Application.MVC.ResponseType, str]]#

Load model configuration from a JSON file and update the models.yaml
This is used in batch mode where GUI configurator cannot be launched

MeshWorkflowGroup#

Overview#

Property detail#

Attribute detail#

Method detail#

`MeshWorkflowGroup`#