MeshWorkflowGroup

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.MeshWorkflowGroup(internalObject: Any)

Bases: object

Defines a MeshWorkflowGroup.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
AddMeshWorkflow	Adds a new workflow to the “MeshWorkflowGroup” object.
ClearGeneratedData	Resets all mesh workflows completely, i.e. also the geometry scoping transferred into each mesh workflow will be reset and all inactive geometry parts/bodies will become active again. Steps, controls, and outcomes will be reset to their initial state while any user-defined property settings will remain as-is.
ClearOutputData	Clears all MeshWorkflowGroup generated mesh and geometry output data (for all children workflow groups transferring meshes)
ClearOutputMeshes	Clears all MeshWorkflowGroup generated mesh output data (for all children workflow groups transferring meshes)
ComputeMeshQualityMetrics	ComputeMeshQualityMetrics method.
CopyTo	Copies all visible properties from this object to another.
CreateObjRef	CreateObjRef method.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
Equals	Equals method.
GenerateWorkflows	Generates all mesh workflows, i.e. executes the “Input”, the “Steps”, and the “Output” as needed.
GetAPIName	Property name bound to dispId.
GetAllProperties	GetAllProperties method.
GetChildren	Gets the list of children, filtered by type.
GetEnumName	Enum name bound to value
GetHashCode	GetHashCode method.
GetIconFile	GetIconFile method.
GetLifetimeService	GetLifetimeService method.
GetMeshQualityTabIndex	GetMeshQualityTabIndex method.
GetObjectData	GetObjectData method.
GetParameter	Gets the parameter corresponding to the given property.
GetPath	GetPath method.
GetPropertyName	GetPropertyName method.
GetPropertyValue	GetPropertyValue method.
GetSheetQuantityTypeString	Get quantity type of sheet metric from mesh metric type
GetSolidMeshMetrics	GetSolidMeshMetrics method.
GetSolidMeshQualityState	Get the state of solid mesh quality worksheet tab
GetSolidSurfaceMeshMetrics	GetSolidSurfaceMeshMetrics method.
GetSolidSurfaceMeshQualityErrorLimit	Get Mesh Quality Error Limit
GetSolidSurfaceMeshQualityErrorLimitIsDefault	Get SolidSurface Mesh Quality Worksheet Error Limit is Default
GetSolidSurfaceMeshQualityName	Get Mesh Quality Name
GetSolidSurfaceMeshQualityState	Get the state of solid surface mesh quality worksheet tab
GetSolidSurfaceMeshQualityWarningLimit	Get Mesh Quality Warning Limit
GetSolidSurfaceMeshQualityWarningLimitIsDefault	Get SolidSurface Mesh Quality Worksheet Warning Limit is Default
GetSolidSurfaceMeshQualityWorstMetricBackgroundColor	Get Mesh Quality Worst Metric BackgroundColor
GetSolidSurfaceMeshQualityWorstMetricTooltip	Get Mesh Quality Worst Metric Tooltip
GetSolidSurfaceMeshQualityWorstMetricValue	Get Mesh Quality Worst Metric Value
GetSolidSurfaceQuantityTypeString	Get Quantity type from SolidSurface mesh metric type
GetSurfaceMeshMetrics	GetSurfaceMeshMetrics method.
GetSurfaceMeshQualityErrorLimit	Get User Mesh Quality Error Limit
GetSurfaceMeshQualityErrorLimitIsDefault	Get Mesh Quality Error Limit is default
GetSurfaceMeshQualityName	GetSurfaceMeshQualityName method.
GetSurfaceMeshQualityState	Get the state of surface mesh quality worksheet tab
GetSurfaceMeshQualityWarningLimit	Get User Mesh Quality Warning Limit
GetSurfaceMeshQualityWarningLimitIsDefault	Get Mesh Quality Warning Limit is default
GetSurfaceMeshQualityWorstMetricBackgroundColor	Get Mesh Quality Worst Metric Background Colour
GetSurfaceMeshQualityWorstMetricTooltip	Get Mesh Quality Worst Metric Tooltip
GetSurfaceMeshQualityWorstMetricValue	Get Mesh Quality Worst Metric Value
GetType	GetType method.
GetVisibleProperties	GetVisibleProperties method.
GetVisiblePropertyNames	GetVisiblePropertyNames method.
GetVolumeMeshQualityErrorLimit	Get Mesh Quality Error Limit
GetVolumeMeshQualityErrorLimitIsDefault	Get Volume Mesh Quality Worksheet Error Limit is Default
GetVolumeMeshQualityName	Get Mesh Quality Name
GetVolumeMeshQualityWarningLimit	Get Mesh Quality Warning Limit
GetVolumeMeshQualityWarningLimitIsDefault	Get Volume Mesh Quality Worksheet Warning Limit is Default
GetVolumeMeshQualityWorstMetricBackgroundColor	Get Mesh Quality Worst Metric BackgroundColor
GetVolumeMeshQualityWorstMetricTooltip	Get Mesh Quality Worst Metric Tooltip
GetVolumeMeshQualityWorstMetricValue	Get Mesh Quality Worst Metric Value
GetVolumeQuantityTypeString	Get Quantity type from solid mesh metric type
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
InitializeLifetimeService	InitializeLifetimeService method.
IsPropertyEditable	IsPropertyEditable method.
IsPropertyVisible	IsPropertyVisible method.
IsSolidSurfaceMeshQualityMetricComputed	Is Solid Surface Mesh Quality Metric Computed
IsSurfaceMeshQualityMetricComputed	Is Surface Mesh Quality Metric Computed
IsVolumeMeshQualityMetricComputed	Is Solid Mesh Quality Metric Computed
PropertyByAPIName	Get a property by its API name.
PropertyById	PropertyById method.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnType	Renames applying the default name based on type.
ResetMeshQualityMetrics	ResetMeshQualityMetrics method.
SetMeshQualityTabIndex	SetMeshQualityTabIndex method.
SetSolidSurfaceMeshQualityErrorLimit	Set Mesh Quality Error Limit
SetSolidSurfaceMeshQualityWarningLimit	Set Mesh Quality Warning Limit
SetSurfaceMeshQualityErrorLimit	Set Mesh Quality Error Level
SetSurfaceMeshQualityWarningLimit	Set Mesh Quality Warning Limit
SetVolumeMeshQualityErrorLimit	Set Mesh Quality Error Limit
SetVolumeMeshQualityWarningLimit	Set Mesh Quality Warning Limit
ToString	ToString method.
UpdateMeshWorkflowGroup	Updates MeshWorkflowGroup object -> generates all need generated steps.

Properties

ActiveWorkflow	Gets the ActiveWorkflow.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
DataModelObjectCategory	Gets the current DataModelObject's category.
Figures	Gets the list of associated figures.
GroupingFolder	GroupingFolder property.
IconName	IconName property.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
MeshWorkflowObjects	Gets the MeshWorkflowGroup.
Name	Name property.
NumberOfShellMeshQualityMetrics	NumberOfShellMeshQualityMetrics property.
NumberOfSolidMeshQualityMetrics	NumberOfSolidMeshQualityMetrics property.
NumberOfSolidSurfaceMeshQualityMetrics	NumberOfSolidSurfaceMeshQualityMetrics property.
ObjectId	ObjectId property.
ObjectState	ObjectState property.
ObjectTags	ObjectTags property.
Parent	Parent property.
Properties	Gets the list of properties for this object.
State	State property.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property MeshWorkflowGroup.ActiveWorkflow: Ansys.ACT.Automation.Mechanical.MeshWorkflow | None

Gets the ActiveWorkflow.

property MeshWorkflowGroup.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property MeshWorkflowGroup.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property MeshWorkflowGroup.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property MeshWorkflowGroup.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property MeshWorkflowGroup.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

GroupingFolder property.

property MeshWorkflowGroup.IconName: str | None

IconName property.

property MeshWorkflowGroup.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property MeshWorkflowGroup.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSEngineeringModelAuto | None

Gets the internal object. For advanced usage only.

property MeshWorkflowGroup.MeshWorkflowObjects: Iterable[Ansys.ACT.Automation.Mechanical.MeshWorkflow] | None

Gets the MeshWorkflowGroup.

property MeshWorkflowGroup.Name: str | None

Name property.

property MeshWorkflowGroup.NumberOfShellMeshQualityMetrics: int | None

NumberOfShellMeshQualityMetrics property.

property MeshWorkflowGroup.NumberOfSolidMeshQualityMetrics: int | None

NumberOfSolidMeshQualityMetrics property.

property MeshWorkflowGroup.NumberOfSolidSurfaceMeshQualityMetrics: int | None

NumberOfSolidSurfaceMeshQualityMetrics property.

property MeshWorkflowGroup.ObjectId: int | None

ObjectId property.

property MeshWorkflowGroup.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None

ObjectState property.

property MeshWorkflowGroup.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None

ObjectTags property.

property MeshWorkflowGroup.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None

Parent property.

property MeshWorkflowGroup.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property MeshWorkflowGroup.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None

State property.

property MeshWorkflowGroup.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

MeshWorkflowGroup.Activate() → None

Activate the current object.

MeshWorkflowGroup.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

MeshWorkflowGroup.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

MeshWorkflowGroup.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

MeshWorkflowGroup.AddMeshWorkflow(type: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.WorkflowType) → Ansys.ACT.Automation.Mechanical.MeshWorkflow

Adds a new workflow to the “MeshWorkflowGroup” object.

MeshWorkflowGroup.ClearGeneratedData() → None

Resets all mesh workflows completely, i.e. also the geometry scoping transferred into each mesh workflow will be reset and all inactive geometry parts/bodies will become active again. Steps, controls, and outcomes will be reset to their initial state while any user-defined property settings will remain as-is.

MeshWorkflowGroup.ClearOutputData() → None

Clears all MeshWorkflowGroup generated mesh and geometry output data (for all children workflow groups transferring meshes)

MeshWorkflowGroup.ClearOutputMeshes() → None

Clears all MeshWorkflowGroup generated mesh output data (for all children workflow groups transferring meshes)

MeshWorkflowGroup.ComputeMeshQualityMetrics(scope: str) → None

ComputeMeshQualityMetrics method.

MeshWorkflowGroup.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

MeshWorkflowGroup.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef

CreateObjRef method.

MeshWorkflowGroup.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

MeshWorkflowGroup.Delete() → None

Run the Delete action.

MeshWorkflowGroup.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

MeshWorkflowGroup.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool

Equals method.

MeshWorkflowGroup.GenerateWorkflows() → None

Generates all mesh workflows, i.e. executes the “Input”, the “Steps”, and the “Output” as needed.

MeshWorkflowGroup.GetAPIName(dispId: int) → str

Property name bound to dispId.

MeshWorkflowGroup.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]

GetAllProperties method.

MeshWorkflowGroup.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

MeshWorkflowGroup.GetEnumName(enumType: type, value: int, dispId: int) → str

Enum name bound to value

MeshWorkflowGroup.GetHashCode() → int

GetHashCode method.

MeshWorkflowGroup.GetIconFile() → System.Byte

GetIconFile method.

MeshWorkflowGroup.GetLifetimeService() → Any

GetLifetimeService method.

MeshWorkflowGroup.GetMeshQualityTabIndex() → int

GetMeshQualityTabIndex method.

MeshWorkflowGroup.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None

GetObjectData method.

MeshWorkflowGroup.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

MeshWorkflowGroup.GetPath() → str

GetPath method.

MeshWorkflowGroup.GetPropertyName(dispId: int) → str

GetPropertyName method.

MeshWorkflowGroup.GetPropertyValue(name: str) → Any

GetPropertyValue method.

MeshWorkflowGroup.GetSheetQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get quantity type of sheet metric from mesh metric type

MeshWorkflowGroup.GetSolidMeshMetrics() → Ansys.Common.Interop.AnsCoreObjects.IAnsIntColl

GetSolidMeshMetrics method.

MeshWorkflowGroup.GetSolidMeshQualityState() → Ansys.Common.Interop.DSObjectTypes.DSWorksheetTabState

Get the state of solid mesh quality worksheet tab

MeshWorkflowGroup.GetSolidSurfaceMeshMetrics() → Ansys.Common.Interop.AnsCoreObjects.IAnsIntColl

GetSolidSurfaceMeshMetrics method.

MeshWorkflowGroup.GetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Error Limit

MeshWorkflowGroup.GetSolidSurfaceMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get SolidSurface Mesh Quality Worksheet Error Limit is Default

MeshWorkflowGroup.GetSolidSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Name

MeshWorkflowGroup.GetSolidSurfaceMeshQualityState() → Ansys.Common.Interop.DSObjectTypes.DSWorksheetTabState

Get the state of solid surface mesh quality worksheet tab

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Warning Limit

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get SolidSurface Mesh Quality Worksheet Warning Limit is Default

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric BackgroundColor

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric Tooltip

MeshWorkflowGroup.GetSolidSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Worst Metric Value

MeshWorkflowGroup.GetSolidSurfaceQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Quantity type from SolidSurface mesh metric type

MeshWorkflowGroup.GetSurfaceMeshMetrics() → Ansys.Common.Interop.AnsCoreObjects.IAnsIntColl

GetSurfaceMeshMetrics method.

MeshWorkflowGroup.GetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get User Mesh Quality Error Limit

MeshWorkflowGroup.GetSurfaceMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Mesh Quality Error Limit is default

MeshWorkflowGroup.GetSurfaceMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

GetSurfaceMeshQualityName method.

MeshWorkflowGroup.GetSurfaceMeshQualityState() → Ansys.Common.Interop.DSObjectTypes.DSWorksheetTabState

Get the state of surface mesh quality worksheet tab

MeshWorkflowGroup.GetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get User Mesh Quality Warning Limit

MeshWorkflowGroup.GetSurfaceMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Mesh Quality Warning Limit is default

MeshWorkflowGroup.GetSurfaceMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric Background Colour

MeshWorkflowGroup.GetSurfaceMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric Tooltip

MeshWorkflowGroup.GetSurfaceMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Worst Metric Value

MeshWorkflowGroup.GetType() → type

GetType method.

MeshWorkflowGroup.GetVisibleProperties() → List[System.Reflection.PropertyInfo]

GetVisibleProperties method.

MeshWorkflowGroup.GetVisiblePropertyNames() → List[str]

GetVisiblePropertyNames method.

MeshWorkflowGroup.GetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Error Limit

MeshWorkflowGroup.GetVolumeMeshQualityErrorLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Volume Mesh Quality Worksheet Error Limit is Default

MeshWorkflowGroup.GetVolumeMeshQualityName(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Name

MeshWorkflowGroup.GetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Warning Limit

MeshWorkflowGroup.GetVolumeMeshQualityWarningLimitIsDefault(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Get Volume Mesh Quality Worksheet Warning Limit is Default

MeshWorkflowGroup.GetVolumeMeshQualityWorstMetricBackgroundColor(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric BackgroundColor

MeshWorkflowGroup.GetVolumeMeshQualityWorstMetricTooltip(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Mesh Quality Worst Metric Tooltip

MeshWorkflowGroup.GetVolumeMeshQualityWorstMetricValue(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → Ansys.Core.Units.Quantity

Get Mesh Quality Worst Metric Value

MeshWorkflowGroup.GetVolumeQuantityTypeString(metric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → str

Get Quantity type from solid mesh metric type

MeshWorkflowGroup.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

MeshWorkflowGroup.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

MeshWorkflowGroup.InitializeLifetimeService() → Any

InitializeLifetimeService method.

MeshWorkflowGroup.IsPropertyEditable(dispId: int) → bool

IsPropertyEditable method.

MeshWorkflowGroup.IsPropertyVisible(dispId: int) → bool

IsPropertyVisible method.

MeshWorkflowGroup.IsSolidSurfaceMeshQualityMetricComputed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Is Solid Surface Mesh Quality Metric Computed

MeshWorkflowGroup.IsSurfaceMeshQualityMetricComputed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Is Surface Mesh Quality Metric Computed

MeshWorkflowGroup.IsVolumeMeshQualityMetricComputed(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType) → bool

Is Solid Mesh Quality Metric Computed

MeshWorkflowGroup.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MeshWorkflowGroup.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property

PropertyById method.

MeshWorkflowGroup.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

MeshWorkflowGroup.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

MeshWorkflowGroup.RenameBasedOnType() → None

Renames applying the default name based on type.

MeshWorkflowGroup.ResetMeshQualityMetrics() → None

ResetMeshQualityMetrics method.

MeshWorkflowGroup.SetMeshQualityTabIndex(tabIndex: int) → None

SetMeshQualityTabIndex method.

MeshWorkflowGroup.SetSolidSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None

Set Mesh Quality Error Limit

MeshWorkflowGroup.SetSolidSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None

Set Mesh Quality Warning Limit

MeshWorkflowGroup.SetSurfaceMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None

Set Mesh Quality Error Level

MeshWorkflowGroup.SetSurfaceMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None

Set Mesh Quality Warning Limit

MeshWorkflowGroup.SetVolumeMeshQualityErrorLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, errorLevel: float) → None

Set Mesh Quality Error Limit

MeshWorkflowGroup.SetVolumeMeshQualityWarningLimit(meshMetric: Ansys.Mechanical.DataModel.Enums.MeshMetricType, warningLevel: float) → None

Set Mesh Quality Warning Limit

MeshWorkflowGroup.ToString() → str

ToString method.

MeshWorkflowGroup.UpdateMeshWorkflowGroup() → None

Updates MeshWorkflowGroup object -> generates all need generated steps.