`MeshWorkflowControl`#

class ansys.mechanical.stubs.v242.Ansys.ACT.Automation.Mechanical.MeshWorkflowControl(internalObject: Any)#

Bases: object

Object that wraps IDSEngineeringModelControl.

Overview#

Methods

`Activate`	Activate the current object.
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`CanCheckPublicStateCallbackForIM`	CanCheckPublicStateCallbackForIM method.
`CanShowPublishStateIM`	CanShowPublishStateIM method.
`ConvertControl`	Converts the control to a ExternalPartEnclosure
`CopyPythonScriptContentToClipboard`	CopyPythonScriptContentToClipboard method.
`CopyPythonScriptPathToClipboard`	CopyPythonScriptPathToClipboard method.
`CopyTo`	Copies all visible properties from this object to another.
`CreateObjRef`	CreateObjRef method.
`CreateParameter`	Creates a new parameter for a Property.
`Delete`	Run the Delete action.
`Duplicate`	Creates a copy of the current DataModelObject.
`Equals`	Equals method.
`GetAPIName`	Property name bound to dispId.
`GetAllProperties`	GetAllProperties method.
`GetChildren`	Gets the list of children, filtered by type.
`GetDomainBrowserAvailableScopes`	GetDomainBrowserAvailableScopes method.
`GetEnumName`	Enum name bound to value
`GetHashCode`	GetHashCode method.
`GetIconFile`	GetIconFile method.
`GetLifetimeService`	GetLifetimeService method.
`GetObjectData`	GetObjectData method.
`GetParameter`	Gets the parameter corresponding to the given property.
`GetPath`	GetPath method.
`GetPropertyName`	GetPropertyName method.
`GetPropertyValue`	GetPropertyValue method.
`GetType`	GetType method.
`GetUnpublishedList`	GetUnpublishedList method.
`GetVisibleProperties`	GetVisibleProperties method.
`GetVisiblePropertyNames`	GetVisiblePropertyNames method.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`InitializeLifetimeService`	InitializeLifetimeService method.
`IsPropertyEditable`	IsPropertyEditable method.
`IsPropertyVisible`	IsPropertyVisible method.
`PropertyByAPIName`	Get a property by its API name.
`PropertyById`	PropertyById method.
`PropertyByName`	Get a property by its unique name.
`PublishIMProp`	PublishIMProp method.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.
`RenameBasedOnType`	Renames applying the default name based on type.
`SetPropertyValue`	SetPropertyValue method.
`SetPublish`	SetPublish method.
`SetScopeMethodAndPattern`	SetScopeMethodAndPattern method.
`SetUnpublish`	SetUnpublish method.
`ToString`	ToString method.

Properties

`AppendData`	Gets or sets whether to append the mesh data being read to the current PrimeMesh model or to clear the model content before the mesh data is being read. The default value is false.
`AutomaticExternalScope`	Gets or sets whether to define programmatically the external scoping method and pattern for the external enclosure. The default value is false.
`BiasingIntensity`	Gets or sets the BiasingIntensity.
`BiasingModality`	Gets or sets the BiasingModality.
`BodyTypes`	Gets or sets the BodyTypes.
`CenterPlaneNormalOffset`	It defines the desired offset of the plane of the hemisphere from the model.
`CenterPosition`	It is defined by “Centered”, “Minimal”, and “User Defined”.
`Children`	Gets the list of children.
`ConstantHeight`	Height of a single layer of mesh elements.
`ConsumeAttachments`
`ControlDataDefinition`	This property is used to define if the control data is defined by value or by settings.
`ControlScopeDefinition`	It is defined by value or outcome.
`ControlScopeMethod`	The method can be label/zone/part.
`ControlScopeOutcome`	Gets or sets the ControlScopeOutcome.
`ControlScopePattern`	Gets or sets the ControlScopePattern.
`ControlString`	Gets the ControlString.
`ControlType`	Returns the type of the control.
`CoordinateSystem`	Gets or sets the Coordinate System object used to define the material point location.
`CreateAssemblyComponent`	Gets or sets the CreateAssemblyComponent.
`CreateFaceZone`	Gets or sets whether to create a new face zone.
`CreateGeometry`	Gets or sets the CreateGeometry.
`CreateQuads`	Gets or sets whether to create quadratic elements. The default value is false.
`CreateSolidComponent`	Gets or sets the CreateSolidComponent.
`DataModelObjectCategory`	Gets the current DataModelObject's category.
`DefeatureTolerance`	Gets or sets the defeature tolerance applied during meshing.
`DefeatureToleranceDefineBy`	Specifies how the Defeature Tolerance is defined for the MultiZone mesher.
`DeleteEmptyVolumes`	This property is used to enable or disable the automatic deletion of empty topo volumes during mesh to topology conversion. The default value is false.
`DeleteInputScope`	Gets or sets whether to delete of input scope after wrapping. The default value is false.
`DeleteMeshVolumes`	Gets or sets the DeleteMeshVolumes.
`DeleteZonePropertiesPropertyExpression`	Gets or sets the DeleteZonePropertiesPropertyExpression.
`DeltaX`	Gets or sets the DeltaX.
`DeltaY`	Gets or sets the DeltaY.
`DeltaZ`	Gets or sets the DeltaZ.
`DihedralAngle`	The dihedral angle is the angle between the normal vectors of two element faces.
`DirectoryName`	Gets or sets the DirectoryName.
`Distance`	Gets or sets the Distance.
`EdgeCleanup`	Gets or sets the EdgeCleanup.
`EdgeLabelName`	This property is used to rename the default edge label name generated during execution of step.
`ElementSize`	Define element size to achieve desired mesh results. User can achieve coarse, medium, or fine mesh by varying this value.
`ElementsPerGap`	Gets or sets the ElementsPerGap .
`EnableCheckpoint`	Flag whether to enable a checkpoint or not. The default value is false.
`EnableSmoothing`	Gets or sets the EnableSmoothing.
`ExcludeEnclosure`	Gets or sets whether to exclude the enclosure from the wrapper scope . The default value is false.
`ExternalLabelName`	This property is used to rename the default external label name generated during execution of step.
`ExternalScopeDefinition`	It is defined by value or outcome depending on if the External scope is defined manual by the user or defined based on a previous outcome.
`ExternalScopeMethod`	The method can be label/zone/part and it is applied to external region of enclosure.
`ExternalScopeOutcome`	If the InnerScopeDefinition is set to Outcome, then this property is visible. It defines the previous step outcome. This way we input the results of a previous step to the current step. The input applies to inner region of enclosure.
`ExternalScopePattern`	The value can be a name of a region or a predefined patterns to select multiple region names.
`FaceZoneByPart`	Gets or sets whether to define an independent face zone for each input part.
`FaceZoneName`	This property is used to define the name of the default face zone name generated during execution of step.
`FeatureSize`	Gets or sets the FeatureSize.
`FieldName`	Gets or sets the FieldName.
`Figures`	Gets the list of associated figures.
`FileFilter`	Gets or sets the FileFilter.
`Filename`	Assign full path to the filename would like to Import/Export.
`Filenames`	Assign paths with '\|' seperator to this property to read multiple files, pass without seperator if single file.
`FixedScopeDefinition`	It is defined by value or outcome.
`FixedScopeMethod`	The method can be label/zone/part.
`FixedScopeOutcome`	Gets or sets the FixedScopeOutcome.
`FixedScopePattern`	Gets or sets the FixedScopePattern.
`FreeEdgesAsFixed`	Gets or sets the FreeEdgesAsFixed.
`FreeFaceMeshType`	Specifies the type of elements for the MultiZone mesher free face mesh.
`GeometryFidelity`	Gets or sets the GeometryFidelity.
`GroupVolumes`	Gets or sets the GroupVolumes.
`GroupingFolder`	GroupingFolder property.
`GrowthRate`	Gradient of element size as each layer grows.
`HemisphereCenterModality`	This property is used to define the rule for the computation of the center of the hemispherical enclosure.
`HemisphereOrientationModality`	This property is used to define the rule for the computation of the orientation of the hemispherical enclosure.
`HexcoreTetLayerRelWidth`	Gets or sets the HexcoreTetLayerRelWidth.
`HorizontalScopeOutcome`	Gets or sets the HorizontalScopeOutcome.
`HorizontalScopePattern`	Gets or sets the HorizontalScopePattern.
`IconName`	IconName property.
`IgnoreOrientation`	Gets or sets the IgnoreOrientation.
`IgnoreSelfProximity`	Gets or sets the IgnoreSelfProximity.
`IgnoreSolidNames`	Gets or sets the IgnoreSolidNames.
`Images`	Gets the list of associated images.
`ImportSourceType`	Gets or sets the ImportSourceType.
`InflationGrowthRate`	Gets or sets gradient of layer height.
`InflationInitialHeight`	Gets or sets the height of the first inflation layer.
`InflationNumberOfLayers`	Gets or sets the number of inflation layers.
`InnerScopeDefinition`	It is defined by value or outcome depending on if the Inner scope is defined manually by the user or defined based on a previous outcome.
`InnerScopeMethod`	The method can be label/zone/part and it is applied to inner region of enclosure.
`InnerScopeOutcome`	If the InnerScopeDefinition is set to Outcome, then this property is visible. It defines the previous step outcome. This way we input the results of a previous step to the current step. The input applies to inner region of enclosure.
`InnerScopePattern`	The value can be a name of a region or a predefined patterns to select multiple region names.
`InputMeshScopeDefinition`
`InputMeshScopeMethod`
`InputMeshScopeOutcome`
`InputMeshScopePattern`
`InternalLabelName`	This property is used to rename the default Internal label name generated during execution of step.
`InternalObject`	Gets the internal object. For advanced usage only.
`LabelName`	This property is used to rename the default label name generated during execution of step.
`Material`	Gets or sets the Material.
`MaterialName`	Gets or sets the Material Name.
`MaterialPointDefinition`	Gets or sets the material point definition type.
`MaterialPointType`	It defines the type of material point, it can be “Include” or “Exclude”.
`MaxEdgeLength`	Gets or sets the MaxEdgeLength.
`MaxHoleSize`	Gets or sets the MaxHoleSize.
`MaxIterations`	Gets or sets the MaxIterations .
`MaxSize`	Gets or sets the MaxSize.
`MeshFlowControl`	This property gives control over the flow of mesh during surface mesh generation. The supported modes are None, and Global Cartesian.
`MeshedVolumeLabelSuffix`	Gets or sets the suffix to be used when defining labels scoped to volumes meshed by the MultiZone mesher.
`MinSize`	Gets or sets the MinSize.
`MinimalNumberOfVolumetricLayers`	It determines the minimal number of layers of volume elements to be created around the scoped body.
`MinimalRadius`	It defines the desired minimal radius of the spherical enclosure.
`MorphSolverModality`	Gets or sets the MorphSolverModality.
`MorphableScopeDefinition`	It is defined by value or outcome.
`MorphableScopeMethod`	The method can be label/zone/part.
`MorphableScopeOutcome`	Gets or sets the MorphableScopeOutcome.
`MorphableScopePattern`	Gets or sets the MorphableScopePattern.
`Name`	Name property.
`Names`	Gets or sets the Names.
`NormalAngle`	Gets or sets the NormalAngle.
`NormalTolerance`	Gets or sets the NormalTolerance.
`NumberOfAttempts`	Number of attempts for mesh convergence.
`NumberOfLayers`	Number of layers of mesh elements.
`NumberOfRings`	Gets or sets the NumberOfRings.
`NumberOfThreads`	Gets or sets the NumberOfThreads.
`NumberOfVolumetricLayers`	Allows user to input number of volumetric layers of the enclosure.
`ObjectId`	ObjectId property.
`ObjectState`	ObjectState property.
`ObjectTags`	ObjectTags property.
`OffsetDistance`	Gets or sets the OffsetDistance.
`Parent`	Parent property.
`PartName`	This property allows user to rename the default part name generated during wrap operation.
`PercentageIncrement`	The number of volumetric Layers determines the number of layers. This property decides whether all the layers are an equal size (default 0.0) or they should gradually increase the size of volume element than previous element.
`PercentageSmoothing`	Gets or sets the PercentageSmoothing.
`PreserveBoundaryLayers`	Gets or sets the PreserveBoundaryLayers.
`ProcessGroups`	Gets or sets the ProcessGroups.
`Properties`	Gets the list of properties for this object.
`PropertyName`	Gets or sets the PropertyName.
`PropertyValue`	Gets or sets the PropertyValue.
`RegionType`	It is defined by Material Point or External.
`Remesh`	Gets or sets whether to allow the remesh of already meshed volumes. The default value is false.
`RepairModel`	Gets or sets whether to repair the PrimeMesh model after the reading operation is executed. The default value is false.
`RestrictBoundaryNodes`	Gets or sets whether to restrict the boundary nodes displacement. The default value is true.
`ReverseDeformationsFilePath`	Gets or sets the ReverseDeformationsFilePath.
`ReverseSurfaceOrientation`	Reverse Surface Orientation. The default value is false.
`RigidScopeDefinition`	It is defined by value or outcome.
`RigidScopeMethod`	The method can be label/zone/part.
`RigidScopeOutcome`	Gets or sets the RigidScopeOutcome.
`RigidScopePattern`	Gets or sets the RigidScopePattern.
`RotationAngle`	Gets or sets the RotationAngle.
`ScaleFactor`	Scale Factor is used to scale shapes in different dimensions.
`ScopeDefinition`	It is defined by value or outcome.
`ScopeMethod`	The method can be label/zone/part.
`ScopeOutcome`	If the InnerScopeDefinition is set to Outcome, then this property is visible. It defines the previous step outcome. This way we input the results of a previous step to the current step. The input applies to inner region of enclosure.
`ScopePattern`	The value can be a name of a region or a predefined patterns to select multiple region names.
`ScriptFilename`
`SharedTopologyLabelName`	Gets or sets the name used as label to scope the shared topology faces which are automatically added as input mesh for MultiZone.
`SizeFieldName`	This property is used to define the name of the size field to apply to the meshing operation.
`SkipGroupRegEx`	Gets or sets the SkipGroupRegEx.
`SkipInteractiveSession`	Gets or sets whether to skip the interactive session on execution. The default value is false.
`SmoothingIterations`	Allows user to input number of iterations needed to achieve good mesh results.
`SmoothingPreserveVolume`	Gets or sets whether to enable and disable the volume preserving smoothing. If enabled, the smoothing will preserve the initial volume of the input. The default value is false.
`SourceScopeDefinition`	It is defined by value or outcome.
`SourceScopeMethod`	The method can be label/zone/part.
`SourceScopeOutcome`	Gets or sets the SourceScopeOutcome.
`SourceScopePattern`	Gets or sets the SourceScopePattern.
`SourceTargetScopeDefinition`
`SourceTargetScopeMethod`
`SourceTargetScopeOutcome`
`SourceTargetScopePattern`
`SphereCenterModality`	This property is used to define the rule for the computation of the center of the spherical enclosure.
`State`	State property.
`Suppressed`	Gets or sets the Suppressed.
`SurfaceMeshType`	This property gives control over what type of elements need to be generated in the mesh. The supported surface mesh types are Triangles and Quadrilaterals.
`SurfaceScopeModality`	The method can be label/zone/part.
`SurfaceTolerance`	Gets or sets the SurfaceTolerance.
`SweepingSize`	Gets or sets the constant size along the sweeping direction.
`TargetScopeDefinition`	It is defined by value or outcome.
`TargetScopeMethod`	The method can be label/zone/part.
`TargetScopeOutcome`	Gets or sets the TargetScopeOutcome.
`TargetScopePattern`	Gets or sets the TargetScopePattern.
`TargetSkewness`	Set Limit to the skewness of an element. Higher the skewness value, expecting a better mesh result.
`Thickness`	Gets or sets the Thickness to be assigned to the scoped zone.
`TopologyConformalConnection`	Gets or sets whether to preserve the topology connection for the newly created faces. The default value is false.
`TriangleCountReductionMode`	This property gives control over the mode/degree of triangle count reduction during surface mesh generation. The supported modes are None, Conservative and Aggressive.
`UnitsSystem`	Gets or sets the UnitsSystem.
`UnoDataEDXPath`	Gets or sets the UnoDataEDXPath.
`VariableName`	Gets or sets the VariableName.
`VariableType`	Gets or sets the VariableType.
`VariableValue`	Gets or sets the VariableValue.
`VerticalDirectionX`	Gets or sets the VerticalDirectionX.
`VerticalDirectionY`	Gets or sets the VerticalDirectionY.
`VerticalDirectionZ`	Gets or sets the VerticalDirectionZ.
`VerticalScopeOutcome`	Gets or sets the VerticalScopeOutcome.
`VerticalScopePattern`	Gets or sets the VerticalScopePattern.
`VerticalizeMaxSize`	Gets or sets the VerticalizeMaxSize.
`VerticalizeMinSize`	Gets or sets the VerticalizeMinSize.
`VerticalizeTargetNormal`	This property defines the target normal direction for the faces during verticalization. The available options are XPlus, YPlus, ZPlus, XMinus, YMinus, ZMinus.
`VisibleProperties`	Gets the list of properties that are visible for this object.
`VolumeCushionPercentage`	Gets or sets the VolumeCushionPercentage.
`VolumeMeshType`	Type of Volume elements such as Tetrahedrons and Hex.
`VolumeScopeModality`	The method can be label/zone/part.
`VolumeZoneName`	This property is used to rename the default volume zone name generated during execution of step.
`WorkingDirectory`	Gets or sets the WorkingDirectory.
`WrapByParts`	Gets or sets whether to wrap each part separately. The default value is false.
`XAxis`	Gets or sets the XAxis.
`XCoordinate`	It defines the X Coordinate.
`YAxis`	Gets or sets the YAxis.
`YCoordinate`	It defines the Y Coordinate.
`ZAxis`	Gets or sets the ZAxis.
`ZCoordinate`	It defines the Z Coordinate.
`ZoneType`	Gets or sets the ZoneType.

Property detail#

property MeshWorkflowControl.AppendData: bool | None#: Gets or sets whether to append the mesh data being read to the current PrimeMesh model or to clear the model content before the mesh data is being read. The default value is false.

property MeshWorkflowControl.AutomaticExternalScope: bool | None#: Gets or sets whether to define programmatically the external scoping method and pattern for the external enclosure. The default value is false.

property MeshWorkflowControl.BiasingIntensity: float | None#: Gets or sets the BiasingIntensity.

property MeshWorkflowControl.BiasingModality: Ansys.Mechanical.DataModel.Enums.MeshWorkflowMorphingBiasingType | None#: Gets or sets the BiasingModality.

property MeshWorkflowControl.BodyTypes: str | None#: Gets or sets the BodyTypes.

property MeshWorkflowControl.CenterPlaneNormalOffset: Ansys.Core.Units.Quantity | None#: It defines the desired offset of the plane of the hemisphere from the model.

property MeshWorkflowControl.CenterPosition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.SphereCenterDefinitionType | None#: It is defined by “Centered”, “Minimal”, and “User Defined”.

property MeshWorkflowControl.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets the list of children.

property MeshWorkflowControl.ConstantHeight: Ansys.Core.Units.Quantity | None#: Height of a single layer of mesh elements.

property MeshWorkflowControl.ConsumeAttachments: bool | None#

property MeshWorkflowControl.ControlDataDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ControlDataDefinedByType | None#: This property is used to define if the control data is defined by value or by settings.

property MeshWorkflowControl.ControlScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome.

property MeshWorkflowControl.ControlScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.ControlScopeOutcome: int | None#: Gets or sets the ControlScopeOutcome.

property MeshWorkflowControl.ControlScopePattern: str | None#: Gets or sets the ControlScopePattern.

property MeshWorkflowControl.ControlString: str | None#: Gets the ControlString.

property MeshWorkflowControl.ControlType: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ControlType | None#: Returns the type of the control.

property MeshWorkflowControl.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#: Gets or sets the Coordinate System object used to define the material point location.

property MeshWorkflowControl.CreateAssemblyComponent: bool | None#: Gets or sets the CreateAssemblyComponent.

property MeshWorkflowControl.CreateFaceZone: bool | None#: Gets or sets whether to create a new face zone.

property MeshWorkflowControl.CreateGeometry: bool | None#: Gets or sets the CreateGeometry.

property MeshWorkflowControl.CreateQuads: bool | None#: Gets or sets whether to create quadratic elements. The default value is false.

property MeshWorkflowControl.CreateSolidComponent: bool | None#: Gets or sets the CreateSolidComponent.

property MeshWorkflowControl.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#: Gets the current DataModelObject's category.

property MeshWorkflowControl.DefeatureTolerance: Ansys.Core.Units.Quantity | None#: Gets or sets the defeature tolerance applied during meshing.

property MeshWorkflowControl.DefeatureToleranceDefineBy: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.DefeatureToleranceDefineBy | None#: Specifies how the Defeature Tolerance is defined for the MultiZone mesher.

property MeshWorkflowControl.DeleteEmptyVolumes: bool | None#: This property is used to enable or disable the automatic deletion of empty topo volumes during mesh to topology conversion. The default value is false.

property MeshWorkflowControl.DeleteInputScope: bool | None#: Gets or sets whether to delete of input scope after wrapping. The default value is false.

property MeshWorkflowControl.DeleteMeshVolumes: bool | None#: Gets or sets the DeleteMeshVolumes.

property MeshWorkflowControl.DeleteZonePropertiesPropertyExpression: str | None#: Gets or sets the DeleteZonePropertiesPropertyExpression.

property MeshWorkflowControl.DeltaX: float | None#: Gets or sets the DeltaX.

property MeshWorkflowControl.DeltaY: float | None#: Gets or sets the DeltaY.

property MeshWorkflowControl.DeltaZ: float | None#: Gets or sets the DeltaZ.

property MeshWorkflowControl.DihedralAngle: Ansys.Core.Units.Quantity | None#: The dihedral angle is the angle between the normal vectors of two element faces.

property MeshWorkflowControl.DirectoryName: str | None#: Gets or sets the DirectoryName.

property MeshWorkflowControl.Distance: float | None#: Gets or sets the Distance.

property MeshWorkflowControl.EdgeCleanup: bool | None#: Gets or sets the EdgeCleanup.

property MeshWorkflowControl.EdgeLabelName: str | None#: This property is used to rename the default edge label name generated during execution of step.

property MeshWorkflowControl.ElementSize: Ansys.Core.Units.Quantity | None#: Define element size to achieve desired mesh results. User can achieve coarse, medium, or fine mesh by varying this value.

property MeshWorkflowControl.ElementsPerGap: int | None#: Gets or sets the ElementsPerGap .

property MeshWorkflowControl.EnableCheckpoint: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.CheckpointDefinitionType | None#: Flag whether to enable a checkpoint or not. The default value is false.

property MeshWorkflowControl.EnableSmoothing: bool | None#: Gets or sets the EnableSmoothing.

property MeshWorkflowControl.ExcludeEnclosure: bool | None#: Gets or sets whether to exclude the enclosure from the wrapper scope . The default value is false.

property MeshWorkflowControl.ExternalLabelName: str | None#: This property is used to rename the default external label name generated during execution of step.

property MeshWorkflowControl.ExternalScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome depending on if the External scope is defined manual by the user or defined based on a previous outcome.

property MeshWorkflowControl.ExternalScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part and it is applied to external region of enclosure.

property MeshWorkflowControl.ExternalScopeOutcome: Ansys.ACT.Automation.Mechanical.MeshWorkflowOutcome | None#: If the InnerScopeDefinition is set to Outcome, then this property is visible. It defines the previous step outcome. This way we input the results of a previous step to the current step. The input applies to inner region of enclosure.

property MeshWorkflowControl.ExternalScopePattern: str | None#: The value can be a name of a region or a predefined patterns to select multiple region names.

property MeshWorkflowControl.FaceZoneByPart: bool | None#: Gets or sets whether to define an independent face zone for each input part.

property MeshWorkflowControl.FaceZoneName: str | None#: This property is used to define the name of the default face zone name generated during execution of step.

property MeshWorkflowControl.FeatureSize: float | None#: Gets or sets the FeatureSize.

property MeshWorkflowControl.FieldName: str | None#: Gets or sets the FieldName.

property MeshWorkflowControl.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#: Gets the list of associated figures.

property MeshWorkflowControl.FileFilter: str | None#: Gets or sets the FileFilter.

property MeshWorkflowControl.Filename: str | None#: Assign full path to the filename would like to Import/Export.

property MeshWorkflowControl.Filenames: str | None#: Assign paths with '|' seperator to this property to read multiple files, pass without seperator if single file.

property MeshWorkflowControl.FixedScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome.

property MeshWorkflowControl.FixedScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.FixedScopeOutcome: int | None#: Gets or sets the FixedScopeOutcome.

property MeshWorkflowControl.FixedScopePattern: str | None#: Gets or sets the FixedScopePattern.

property MeshWorkflowControl.FreeEdgesAsFixed: bool | None#: Gets or sets the FreeEdgesAsFixed.

property MeshWorkflowControl.FreeFaceMeshType: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.FreeFaceMeshType | None#: Specifies the type of elements for the MultiZone mesher free face mesh.

property MeshWorkflowControl.GeometryFidelity: float | None#: Gets or sets the GeometryFidelity.

property MeshWorkflowControl.GroupVolumes: bool | None#: Gets or sets the GroupVolumes.

property MeshWorkflowControl.GroupingFolder: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None#: GroupingFolder property.

property MeshWorkflowControl.GrowthRate: float | None#: Gradient of element size as each layer grows.

property MeshWorkflowControl.HemisphereCenterModality: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.HemisphereCenterDefinitionType | None#: This property is used to define the rule for the computation of the center of the hemispherical enclosure.

property MeshWorkflowControl.HemisphereOrientationModality: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.HemisphereOrientationDefinitionType | None#: This property is used to define the rule for the computation of the orientation of the hemispherical enclosure.

property MeshWorkflowControl.HexcoreTetLayerRelWidth: float | None#: Gets or sets the HexcoreTetLayerRelWidth.

property MeshWorkflowControl.HorizontalScopeOutcome: int | None#: Gets or sets the HorizontalScopeOutcome.

property MeshWorkflowControl.HorizontalScopePattern: str | None#: Gets or sets the HorizontalScopePattern.

property MeshWorkflowControl.IconName: str | None#: IconName property.

property MeshWorkflowControl.IgnoreOrientation: bool | None#: Gets or sets the IgnoreOrientation.

property MeshWorkflowControl.IgnoreSelfProximity: bool | None#: Gets or sets the IgnoreSelfProximity.

property MeshWorkflowControl.IgnoreSolidNames: bool | None#: Gets or sets the IgnoreSolidNames.

property MeshWorkflowControl.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#: Gets the list of associated images.

property MeshWorkflowControl.ImportSourceType: Ansys.Mechanical.DataModel.Enums.MeshWorkflowImportModalityType | None#: Gets or sets the ImportSourceType.

property MeshWorkflowControl.InflationGrowthRate: float | None#: Gets or sets gradient of layer height.

property MeshWorkflowControl.InflationInitialHeight: float | None#: Gets or sets the height of the first inflation layer.

property MeshWorkflowControl.InflationNumberOfLayers: int | None#: Gets or sets the number of inflation layers.

property MeshWorkflowControl.InnerScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome depending on if the Inner scope is defined manually by the user or defined based on a previous outcome.

property MeshWorkflowControl.InnerScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part and it is applied to inner region of enclosure.

property MeshWorkflowControl.InnerScopeOutcome: Ansys.ACT.Automation.Mechanical.MeshWorkflowOutcome | None#: If the InnerScopeDefinition is set to Outcome, then this property is visible. It defines the previous step outcome. This way we input the results of a previous step to the current step. The input applies to inner region of enclosure.

property MeshWorkflowControl.InnerScopePattern: str | None#: The value can be a name of a region or a predefined patterns to select multiple region names.

property MeshWorkflowControl.InputMeshScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#

property MeshWorkflowControl.InputMeshScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#

property MeshWorkflowControl.InputMeshScopeOutcome: int | None#

property MeshWorkflowControl.InputMeshScopePattern: str | None#

property MeshWorkflowControl.InternalLabelName: str | None#: This property is used to rename the default Internal label name generated during execution of step.

property MeshWorkflowControl.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSEngineeringModelControlAuto | None#: Gets the internal object. For advanced usage only.

property MeshWorkflowControl.LabelName: str | None#: This property is used to rename the default label name generated during execution of step.

property MeshWorkflowControl.Material: str | None#: Gets or sets the Material.

property MeshWorkflowControl.MaterialName: str | None#: Gets or sets the Material Name.

property MeshWorkflowControl.MaterialPointDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.MaterialPointDefineByType | None#: Gets or sets the material point definition type.

property MeshWorkflowControl.MaterialPointType: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.MaterialPointType | None#: It defines the type of material point, it can be “Include” or “Exclude”.

property MeshWorkflowControl.MaxEdgeLength: Ansys.Core.Units.Quantity | None#: Gets or sets the MaxEdgeLength.

property MeshWorkflowControl.MaxHoleSize: float | None#: Gets or sets the MaxHoleSize.

property MeshWorkflowControl.MaxIterations: int | None#: Gets or sets the MaxIterations .

property MeshWorkflowControl.MaxSize: Ansys.Core.Units.Quantity | None#: Gets or sets the MaxSize.

property MeshWorkflowControl.MeshFlowControl: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.MeshFlowControl | None#: This property gives control over the flow of mesh during surface mesh generation. The supported modes are None, and Global Cartesian.

property MeshWorkflowControl.MeshedVolumeLabelSuffix: str | None#: Gets or sets the suffix to be used when defining labels scoped to volumes meshed by the MultiZone mesher.

property MeshWorkflowControl.MinSize: Ansys.Core.Units.Quantity | None#: Gets or sets the MinSize.

property MeshWorkflowControl.MinimalNumberOfVolumetricLayers: int | None#: It determines the minimal number of layers of volume elements to be created around the scoped body.

property MeshWorkflowControl.MinimalRadius: Ansys.Core.Units.Quantity | None#: It defines the desired minimal radius of the spherical enclosure.

property MeshWorkflowControl.MorphSolverModality: Ansys.Mechanical.DataModel.Enums.MeshWorkflowMorphingSolverType | None#: Gets or sets the MorphSolverModality.

property MeshWorkflowControl.MorphableScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome.

property MeshWorkflowControl.MorphableScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.MorphableScopeOutcome: int | None#: Gets or sets the MorphableScopeOutcome.

property MeshWorkflowControl.MorphableScopePattern: str | None#: Gets or sets the MorphableScopePattern.

property MeshWorkflowControl.Name: str | None#: Name property.

property MeshWorkflowControl.Names: str | None#: Gets or sets the Names.

property MeshWorkflowControl.NormalAngle: Ansys.Core.Units.Quantity | None#: Gets or sets the NormalAngle.

property MeshWorkflowControl.NormalTolerance: float | None#: Gets or sets the NormalTolerance.

property MeshWorkflowControl.NumberOfAttempts: int | None#: Number of attempts for mesh convergence.

property MeshWorkflowControl.NumberOfLayers: int | None#: Number of layers of mesh elements.

property MeshWorkflowControl.NumberOfRings: int | None#: Gets or sets the NumberOfRings.

property MeshWorkflowControl.NumberOfThreads: int | None#: Gets or sets the NumberOfThreads.

property MeshWorkflowControl.NumberOfVolumetricLayers: int | None#: Allows user to input number of volumetric layers of the enclosure.

property MeshWorkflowControl.ObjectId: int | None#: ObjectId property.

property MeshWorkflowControl.ObjectState: Ansys.Mechanical.DataModel.Enums.ObjectState | None#: ObjectState property.

property MeshWorkflowControl.ObjectTags: Iterable[Ansys.Mechanical.DataModel.Interfaces.IObjectTag] | None#: ObjectTags property.

property MeshWorkflowControl.OffsetDistance: float | None#: Gets or sets the OffsetDistance.

property MeshWorkflowControl.Parent: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject | None#: Parent property.

property MeshWorkflowControl.PartName: str | None#: This property allows user to rename the default part name generated during wrap operation.

property MeshWorkflowControl.PercentageIncrement: float | None#: The number of volumetric Layers determines the number of layers. This property decides whether all the layers are an equal size (default 0.0) or they should gradually increase the size of volume element than previous element.

property MeshWorkflowControl.PercentageSmoothing: int | None#: Gets or sets the PercentageSmoothing.

property MeshWorkflowControl.PreserveBoundaryLayers: bool | None#: Gets or sets the PreserveBoundaryLayers.

property MeshWorkflowControl.ProcessGroups: bool | None#: Gets or sets the ProcessGroups.

property MeshWorkflowControl.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties for this object.

property MeshWorkflowControl.PropertyName: str | None#: Gets or sets the PropertyName.

property MeshWorkflowControl.PropertyValue: str | None#: Gets or sets the PropertyValue.

property MeshWorkflowControl.RegionType: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.WrapperRegionType | None#: It is defined by Material Point or External.

property MeshWorkflowControl.Remesh: bool | None#: Gets or sets whether to allow the remesh of already meshed volumes. The default value is false.

property MeshWorkflowControl.RepairModel: bool | None#: Gets or sets whether to repair the PrimeMesh model after the reading operation is executed. The default value is false.

property MeshWorkflowControl.RestrictBoundaryNodes: bool | None#: Gets or sets whether to restrict the boundary nodes displacement. The default value is true.

property MeshWorkflowControl.ReverseDeformationsFilePath: str | None#: Gets or sets the ReverseDeformationsFilePath.

property MeshWorkflowControl.ReverseSurfaceOrientation: bool | None#: Reverse Surface Orientation. The default value is false.

property MeshWorkflowControl.RigidScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome.

property MeshWorkflowControl.RigidScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.RigidScopeOutcome: int | None#: Gets or sets the RigidScopeOutcome.

property MeshWorkflowControl.RigidScopePattern: str | None#: Gets or sets the RigidScopePattern.

property MeshWorkflowControl.RotationAngle: float | None#: Gets or sets the RotationAngle.

property MeshWorkflowControl.ScaleFactor: float | None#: Scale Factor is used to scale shapes in different dimensions.

property MeshWorkflowControl.ScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome.

property MeshWorkflowControl.ScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.ScopeOutcome: Ansys.ACT.Automation.Mechanical.MeshWorkflowOutcome | None#: If the InnerScopeDefinition is set to Outcome, then this property is visible. It defines the previous step outcome. This way we input the results of a previous step to the current step. The input applies to inner region of enclosure.

property MeshWorkflowControl.ScopePattern: str | None#: The value can be a name of a region or a predefined patterns to select multiple region names.

property MeshWorkflowControl.ScriptFilename: str | None#

property MeshWorkflowControl.SharedTopologyLabelName: str | None#: Gets or sets the name used as label to scope the shared topology faces which are automatically added as input mesh for MultiZone.

property MeshWorkflowControl.SizeFieldName: str | None#: This property is used to define the name of the size field to apply to the meshing operation.

property MeshWorkflowControl.SkipGroupRegEx: str | None#: Gets or sets the SkipGroupRegEx.

property MeshWorkflowControl.SkipInteractiveSession: bool | None#: Gets or sets whether to skip the interactive session on execution. The default value is false.

property MeshWorkflowControl.SmoothingIterations: int | None#: Allows user to input number of iterations needed to achieve good mesh results.

property MeshWorkflowControl.SmoothingPreserveVolume: bool | None#: Gets or sets whether to enable and disable the volume preserving smoothing. If enabled, the smoothing will preserve the initial volume of the input. The default value is false.

property MeshWorkflowControl.SourceScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome.

property MeshWorkflowControl.SourceScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.SourceScopeOutcome: int | None#: Gets or sets the SourceScopeOutcome.

property MeshWorkflowControl.SourceScopePattern: str | None#: Gets or sets the SourceScopePattern.

property MeshWorkflowControl.SourceTargetScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#

property MeshWorkflowControl.SourceTargetScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#

property MeshWorkflowControl.SourceTargetScopeOutcome: int | None#

property MeshWorkflowControl.SourceTargetScopePattern: str | None#

property MeshWorkflowControl.SphereCenterModality: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.SphereCenterDefinitionType | None#: This property is used to define the rule for the computation of the center of the spherical enclosure.

property MeshWorkflowControl.State: Ansys.Mechanical.DataModel.Enums.Legacy.State | None#: State property.

property MeshWorkflowControl.Suppressed: bool | None#: Gets or sets the Suppressed.

property MeshWorkflowControl.SurfaceMeshType: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.SurfaceMeshType | None#: This property gives control over what type of elements need to be generated in the mesh. The supported surface mesh types are Triangles and Quadrilaterals.

property MeshWorkflowControl.SurfaceScopeModality: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.SurfaceTolerance: float | None#: Gets or sets the SurfaceTolerance.

property MeshWorkflowControl.SweepingSize: Ansys.Core.Units.Quantity | None#: Gets or sets the constant size along the sweeping direction.

property MeshWorkflowControl.TargetScopeDefinition: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeDefinedByType | None#: It is defined by value or outcome.

property MeshWorkflowControl.TargetScopeMethod: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.TargetScopeOutcome: int | None#: Gets or sets the TargetScopeOutcome.

property MeshWorkflowControl.TargetScopePattern: str | None#: Gets or sets the TargetScopePattern.

property MeshWorkflowControl.TargetSkewness: float | None#: Set Limit to the skewness of an element. Higher the skewness value, expecting a better mesh result.

property MeshWorkflowControl.Thickness: float | None#: Gets or sets the Thickness to be assigned to the scoped zone.

property MeshWorkflowControl.TopologyConformalConnection: bool | None#: Gets or sets whether to preserve the topology connection for the newly created faces. The default value is false.

property MeshWorkflowControl.TriangleCountReductionMode: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.TriangleCountReductionMode | None#: This property gives control over the mode/degree of triangle count reduction during surface mesh generation. The supported modes are None, Conservative and Aggressive.

property MeshWorkflowControl.UnitsSystem: Ansys.Mechanical.DataModel.Enums.WBUnitSystemType | None#: Gets or sets the UnitsSystem.

property MeshWorkflowControl.UnoDataEDXPath: str | None#: Gets or sets the UnoDataEDXPath.

property MeshWorkflowControl.VariableName: str | None#: Gets or sets the VariableName.

property MeshWorkflowControl.VariableType: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.PythonVariableType | None#: Gets or sets the VariableType.

property MeshWorkflowControl.VariableValue: str | None#: Gets or sets the VariableValue.

property MeshWorkflowControl.VerticalDirectionX: float | None#: Gets or sets the VerticalDirectionX.

property MeshWorkflowControl.VerticalDirectionY: float | None#: Gets or sets the VerticalDirectionY.

property MeshWorkflowControl.VerticalDirectionZ: float | None#: Gets or sets the VerticalDirectionZ.

property MeshWorkflowControl.VerticalScopeOutcome: int | None#: Gets or sets the VerticalScopeOutcome.

property MeshWorkflowControl.VerticalScopePattern: str | None#: Gets or sets the VerticalScopePattern.

property MeshWorkflowControl.VerticalizeMaxSize: Ansys.Core.Units.Quantity | None#: Gets or sets the VerticalizeMaxSize.

property MeshWorkflowControl.VerticalizeMinSize: Ansys.Core.Units.Quantity | None#: Gets or sets the VerticalizeMinSize.

property MeshWorkflowControl.VerticalizeTargetNormal: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.VerticalizeTargetNormal | None#: This property defines the target normal direction for the faces during verticalization. The available options are XPlus, YPlus, ZPlus, XMinus, YMinus, ZMinus.

property MeshWorkflowControl.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties that are visible for this object.

property MeshWorkflowControl.VolumeCushionPercentage: float | None#: Gets or sets the VolumeCushionPercentage.

property MeshWorkflowControl.VolumeMeshType: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.VolumeMeshType | None#: Type of Volume elements such as Tetrahedrons and Hex.

property MeshWorkflowControl.VolumeScopeModality: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType | None#: The method can be label/zone/part.

property MeshWorkflowControl.VolumeZoneName: str | None#: This property is used to rename the default volume zone name generated during execution of step.

property MeshWorkflowControl.WorkingDirectory: str | None#: Gets or sets the WorkingDirectory.

property MeshWorkflowControl.WrapByParts: bool | None#: Gets or sets whether to wrap each part separately. The default value is false.

property MeshWorkflowControl.XAxis: float | None#: Gets or sets the XAxis.

property MeshWorkflowControl.XCoordinate: Ansys.Core.Units.Quantity | None#: It defines the X Coordinate.

property MeshWorkflowControl.YAxis: float | None#: Gets or sets the YAxis.

property MeshWorkflowControl.YCoordinate: Ansys.Core.Units.Quantity | None#: It defines the Y Coordinate.

property MeshWorkflowControl.ZAxis: float | None#: Gets or sets the ZAxis.

property MeshWorkflowControl.ZCoordinate: Ansys.Core.Units.Quantity | None#: It defines the Z Coordinate.

property MeshWorkflowControl.ZoneType: Ansys.Mechanical.DataModel.Enums.MeshWorkflowZoneType | None#: Gets or sets the ZoneType.

Method detail#

MeshWorkflowControl.Activate() → None#: Activate the current object.

MeshWorkflowControl.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure#: Creates a new child Figure.

MeshWorkflowControl.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image#

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

MeshWorkflowControl.CanCheckPublicStateCallbackForIM() → bool#: CanCheckPublicStateCallbackForIM method.

MeshWorkflowControl.CanShowPublishStateIM() → bool#: CanShowPublishStateIM method.

MeshWorkflowControl.ConvertControl(type: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ControlType) → None#: Converts the control to a ExternalPartEnclosure

MeshWorkflowControl.CopyPythonScriptContentToClipboard() → None#: CopyPythonScriptContentToClipboard method.

MeshWorkflowControl.CopyPythonScriptPathToClipboard() → None#: CopyPythonScriptPathToClipboard method.

MeshWorkflowControl.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None#: Copies all visible properties from this object to another.

MeshWorkflowControl.CreateObjRef(requestedType: type) → System.Runtime.Remoting.ObjRef#: CreateObjRef method.

MeshWorkflowControl.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: Creates a new parameter for a Property.

MeshWorkflowControl.Delete() → None#: Run the Delete action.

MeshWorkflowControl.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Creates a copy of the current DataModelObject.

MeshWorkflowControl.Equals(other: Ansys.Mechanical.DataModel.Interfaces.IDataModelObject) → bool#: Equals method.

MeshWorkflowControl.GetAPIName(dispId: int) → str#: Property name bound to dispId.

MeshWorkflowControl.GetAllProperties() → List[Ansys.ACT.Automation.Mechanical.AutomationPropertyWrapper]#: GetAllProperties method.

MeshWorkflowControl.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]#: Gets the list of children, filtered by type.

MeshWorkflowControl.GetDomainBrowserAvailableScopes(path: str) → List[System.Collections.Generic.Dictionary[str, Any]]#: GetDomainBrowserAvailableScopes method.

MeshWorkflowControl.GetEnumName(enumType: type, value: int, dispId: int) → str#: Enum name bound to value

MeshWorkflowControl.GetHashCode() → int#: GetHashCode method.

MeshWorkflowControl.GetIconFile() → System.Byte#: GetIconFile method.

MeshWorkflowControl.GetLifetimeService() → Any#: GetLifetimeService method.

MeshWorkflowControl.GetObjectData(info: System.Runtime.Serialization.SerializationInfo, context: System.Runtime.Serialization.StreamingContext) → None#: GetObjectData method.

MeshWorkflowControl.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: Gets the parameter corresponding to the given property.

MeshWorkflowControl.GetPath() → str#: GetPath method.

MeshWorkflowControl.GetPropertyName(dispId: int) → str#: GetPropertyName method.

MeshWorkflowControl.GetPropertyValue(id: int) → str#: GetPropertyValue method.

MeshWorkflowControl.GetType() → type#: GetType method.

MeshWorkflowControl.GetUnpublishedList() → List[System.Collections.Generic.Dictionary[str, Any]]#: GetUnpublishedList method.

MeshWorkflowControl.GetVisibleProperties() → List[System.Reflection.PropertyInfo]#: GetVisibleProperties method.

MeshWorkflowControl.GetVisiblePropertyNames() → List[str]#: GetVisiblePropertyNames method.

MeshWorkflowControl.GroupAllSimilarChildren() → None#: Run the GroupAllSimilarChildren action.

MeshWorkflowControl.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#: Run the GroupSimilarObjects action.

MeshWorkflowControl.InitializeLifetimeService() → Any#: InitializeLifetimeService method.

MeshWorkflowControl.IsPropertyEditable(dispId: int) → bool#: IsPropertyEditable method.

MeshWorkflowControl.IsPropertyVisible(dispId: int) → bool#: IsPropertyVisible method.

MeshWorkflowControl.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property#

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MeshWorkflowControl.PropertyById(dispId: int) → Ansys.ACT.Automation.Mechanical.Property#: PropertyById method.

MeshWorkflowControl.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property#: Get a property by its unique name.

MeshWorkflowControl.PublishIMProp() → None#: PublishIMProp method.

MeshWorkflowControl.RemoveParameter(propName: str) → None#: Removes the parameter from the parameter set corresponding to the given property.

MeshWorkflowControl.RenameBasedOnType() → None#: Renames applying the default name based on type.

MeshWorkflowControl.SetPropertyValue(id: int, value: str, validate: int) → None#: SetPropertyValue method.

MeshWorkflowControl.SetPublish(id: int) → None#: SetPublish method.

MeshWorkflowControl.SetScopeMethodAndPattern(methodId: int, method: Ansys.Mechanical.DataModel.MechanicalEnums.MeshWorkflow.ScopeType, patternId: int, pattern: str) → None#: SetScopeMethodAndPattern method.

MeshWorkflowControl.SetUnpublish(id: int) → None#: SetUnpublish method.

MeshWorkflowControl.ToString() → str#: ToString method.

MeshWorkflowControl#

Overview#

Property detail#

Method detail#

`MeshWorkflowControl`#