`MiddlePrincipalStress`#

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.Results.StressResults.MiddlePrincipalStress#

Bases: object

Defines a MiddlePrincipalStress.

Overview#

Methods

`Activate`	Activate the current object.
`AddAlert`	Creates a new Alert
`AddComment`	Creates a new child Comment.
`AddConvergence`	Creates a new Convergence
`AddFigure`	Creates a new child Figure.
`AddImage`	Creates a new child Image.
`BodyWhereMaximumOccurs`	Gets the body that has the maximum result value.
`ClearGeneratedData`	Run the ClearGeneratedData action.
`CopyTo`	Copies all visible properties from this object to another.
`CreateParameter`	CreateParameter method.
`CreateResultsAtAllSets`	Creates results at all sets for results under a solution.
`Delete`	Run the Delete action.
`Duplicate`	Creates a copy of the current DataModelObject.
`DuplicateWithoutResults`	Run the DuplicateWithoutResults action.
`EvaluateAllResults`	Run the EvaluateAllResults action.
`ExportAnimation`	Run the ExportAnimation action.
`ExportToTextFile`	Run the ExportToTextFile action.
`FetchRemoteResults`	Run the FetchRemoteResult action.
`GetChildren`	Gets the list of children, filtered by type.
`GetParameter`	Gets the parameter corresponding to the given property.
`GroupAllSimilarChildren`	Run the GroupAllSimilarChildren action.
`GroupSimilarObjects`	Run the GroupSimilarObjects action.
`PromoteToNamedSelection`	Run the PromoteToNamedSelection action.
`PropertyByAPIName`	Get a property by its API name.
`PropertyByName`	Get a property by its unique name.
`RemoveParameter`	Removes the parameter from the parameter set corresponding to the given property.
`RenameBasedOnDefinition`	Run the RenameBasedOnDefinition action.
`RetrieveResult`	Evaluates the individual result without evaluating all the results in the same solution.

Properties

`Amplitude`	Gets or sets the Amplitude.
`Average`	Gets the Average.
`AverageAcrossBodies`	Gets or sets the AverageAcrossBodies.
`AverageRadiusOfCurvature`	Gets or sets the AverageRadiusOfCurvature.
`BendingInside`	Gets the BendingInside.
`BendingOutside`	Gets the BendingOutside.
`By`	Gets or sets the By.
`CalculateTimeHistory`	Gets or sets the CalculateTimeHistory.
`Children`	Gets the list of children.
`CombinationNumber`	Gets or sets the Combination Number for a Solution Combination result.
`Comments`	Gets the list of associated comments.
`CoordinateSystem`	Gets or sets the Coordinate System.
`CrackFrontNumber`	Gets or sets the CrackFrontNumber.
`CyclicMode`	Gets or sets the CyclicMode.
`DataModelObjectCategory`	Gets the current DataModelObject's category.
`DisplayOption`	Gets or sets the DisplayOption.
`DisplayTime`	Gets or sets the DisplayTime.
`DpfEvaluation`	Gets or sets the DpfEvaluation.
`EnvironmentSelection`	Gets or sets the EnvironmentSelection.
`Figures`	Gets the list of associated figures.
`Frequency`	Gets or sets the Frequency.
`GlobalIDs`	Gets or sets the GlobalIDs.
`GraphControlsXAxis`	Gets or sets the GraphControlsXAxis.
`HarmonicIndex`	Gets or sets the HarmonicIndex.
`Identifier`	Gets or sets the Identifier.
`Images`	Gets the list of associated images.
`InternalObject`	Gets the internal object. For advanced usage only.
`IsSolved`	Gets the IsSolved.
`ItemType`	Gets or sets the ItemType.
`IterationNumber`	Gets the IterationNumber.
`IterationStep`	Gets or sets the IterationStep.
`Layer`	Gets or sets the Layer.
`Linearized2DBehavior`	Gets or sets the Linearized2DBehavior.
`LoadMultiplier`	Gets the LoadMultiplier.
`LoadStep`	Gets the LoadStep.
`LoadStepForMaximumOfMaximumValues`	Get the Load Step for the maximum of maximum values.
`LoadStepForMaximumOfMinimumValues`	Get the Load Step for the maximum of minimum values.
`LoadStepForMinimumOfMaximumValues`	Get the Load Step for the minimum of maximum values.
`LoadStepForMinimumOfMinimumValues`	Get the Load Step for the minimum of minimum values.
`LoadStepNumber`	Gets or sets the LoadStepNumber.
`Location`	Gets or sets the Location.
`Maximum`	Gets the Maximum.
`MaximumOccursOn`	Gets the MaximumOccursOn.
`MaximumOfMaximumOverTime`	Gets the MaximumOfMaximumOverTime.
`MaximumOfMinimumOverTime`	Gets the MaximumOfMinimumOverTime.
`Membrane`	Gets the Membrane.
`MembraneBendingCenter`	Gets the MembraneBendingCenter.
`MembraneBendingInside`	Gets the MembraneBendingInside.
`MembraneBendingOutside`	Gets the MembraneBendingOutside.
`Minimum`	Gets the Minimum.
`MinimumOccursOn`	Gets the MinimumOccursOn.
`MinimumOfMaximumOverTime`	Gets the MinimumOfMaximumOverTime.
`MinimumOfMinimumOverTime`	Gets the MinimumOfMinimumOverTime.
`Mode`	Gets or sets the Mode.
`NamedSelections`	Gets or sets the NamedSelections.
`NormalOrientation`	Gets or sets the NormalOrientation.
`Path`	Path property.
`PeakCenter`	Gets the PeakCenter.
`PeakInside`	Gets the PeakInside.
`PeakOutside`	Gets the PeakOutside.
`PhaseIncrement`	Gets or sets the PhaseIncrement.
`Plies`	Plies property.
`PlotData`	Gets the result table.
`Ply`	Gets or sets the Ply selection.
`Position`	Gets or sets the Position.
`Probability`	Gets the Probability.
`Properties`	Gets the list of properties for this object.
`RPMSelection`	Gets or sets the RPM Selection value at which the results are evaluated.
`ReportedFrequency`	Gets the ReportedFrequency.
`SaveAuxiliaryResult`	Gets or sets the option to save auxiliary results to disk. This property is valid for results under Modal and Harmonic analyses with On Demand Expansion enabled. An exception is thrown otherwise.
`ScaleFactor`	Gets or sets the ScaleFactor.
`ScopingMethod`	Gets or sets the ScopingMethod.
`SetNumber`	Gets or sets the Set Number.
`SolutionCombinationDriver`	Gets or sets the SolutionCombinationDriver.
`SolverComponentIDs`	Gets or sets the SolverComponentIDs.
`StressStrainType`	Gets or sets the StressStrainType.
`SubScopeBy`	Gets or sets the SubScopeBy.
`Substep`	Gets the Substep.
`Subtype`	Gets or sets the Subtype.
`Suppressed`	Gets or sets the Suppressed.
`Surface`	Surface property.
`SurfaceCoating`	SurfaceCoating property.
`SweepingPhase`	Gets or sets the SweepingPhase.
`ThroughThicknessBendingStress`	Gets or sets the ThroughThicknessBendingStress.
`Time`	Gets the Time.
`TimeForMaximumOfMaximumValues`	Get the Time for the maximum of maximum values.
`TimeForMaximumOfMinimumValues`	Get the Time for the maximum of minimum values.
`TimeForMinimumOfMaximumValues`	Get the Time for the minimum of maximum values.
`TimeForMinimumOfMinimumValues`	Get the Time for the minimum of minimum values.
`Total`	Gets the Total.
`TotalCenter`	Gets the TotalCenter.
`TotalInside`	Gets the TotalInside.
`TotalOutside`	Gets the TotalOutside.
`VisibleProperties`	Gets the list of properties that are visible for this object.

Property detail#

property MiddlePrincipalStress.Amplitude: bool | None#: Gets or sets the Amplitude.

property MiddlePrincipalStress.Average: Ansys.Core.Units.Quantity | None#: Gets the Average.

property MiddlePrincipalStress.AverageAcrossBodies: bool | None#: Gets or sets the AverageAcrossBodies.

property MiddlePrincipalStress.AverageRadiusOfCurvature: Ansys.Core.Units.Quantity | None#: Gets or sets the AverageRadiusOfCurvature.

property MiddlePrincipalStress.BendingInside: Ansys.Core.Units.Quantity | None#: Gets the BendingInside.

property MiddlePrincipalStress.BendingOutside: Ansys.Core.Units.Quantity | None#: Gets the BendingOutside.

property MiddlePrincipalStress.By: Ansys.Mechanical.DataModel.Enums.SetDriverStyle | None#: Gets or sets the By.

property MiddlePrincipalStress.CalculateTimeHistory: bool | None#: Gets or sets the CalculateTimeHistory.

property MiddlePrincipalStress.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets the list of children.

property MiddlePrincipalStress.CombinationNumber: int | None#: Gets or sets the Combination Number for a Solution Combination result.

property MiddlePrincipalStress.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None#: Gets the list of associated comments.

property MiddlePrincipalStress.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None#: Gets or sets the Coordinate System. Accepts/Returns None for Solution Coordinate System in the general case (if applicable). Accepts/Returns None for Fiber Coordinate System for a result that is sub scoped by ply.

property MiddlePrincipalStress.CrackFrontNumber: int | None#: Gets or sets the CrackFrontNumber.

property MiddlePrincipalStress.CyclicMode: int | None#: Gets or sets the CyclicMode.

property MiddlePrincipalStress.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None#: Gets the current DataModelObject's category.

property MiddlePrincipalStress.DisplayOption: Ansys.Mechanical.DataModel.Enums.ResultAveragingType | None#: Gets or sets the DisplayOption.

property MiddlePrincipalStress.DisplayTime: Ansys.Core.Units.Quantity | None#: Gets or sets the DisplayTime.

property MiddlePrincipalStress.DpfEvaluation: Ansys.Mechanical.DataModel.Enums.DpfEvaluationType | None#: Gets or sets the DpfEvaluation.

property MiddlePrincipalStress.EnvironmentSelection: Ansys.ACT.Automation.Mechanical.Analysis | None#: Gets or sets the EnvironmentSelection.

property MiddlePrincipalStress.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None#: Gets the list of associated figures.

property MiddlePrincipalStress.Frequency: Ansys.Core.Units.Quantity | None#: Gets or sets the Frequency.

property MiddlePrincipalStress.GlobalIDs: str | None#: Gets or sets the GlobalIDs.

property MiddlePrincipalStress.GraphControlsXAxis: Ansys.Mechanical.DataModel.Enums.GraphControlsXAxis | None#: Gets or sets the GraphControlsXAxis.

property MiddlePrincipalStress.HarmonicIndex: int | None#: Gets or sets the HarmonicIndex.

property MiddlePrincipalStress.Identifier: str | None#: Gets or sets the Identifier.

property MiddlePrincipalStress.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None#: Gets the list of associated images.

property MiddlePrincipalStress.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSResultAuto | None#: Gets the internal object. For advanced usage only.

property MiddlePrincipalStress.IsSolved: bool | None#: Gets the IsSolved.

property MiddlePrincipalStress.ItemType: Ansys.Mechanical.DataModel.Enums.ResultFileItemType | None#: Gets or sets the ItemType.

property MiddlePrincipalStress.IterationNumber: int | None#: Gets the IterationNumber.

property MiddlePrincipalStress.IterationStep: int | None#: Gets or sets the IterationStep.

property MiddlePrincipalStress.Layer: int | None#: Gets or sets the Layer.

property MiddlePrincipalStress.Linearized2DBehavior: Ansys.Mechanical.DataModel.Enums.Linearized2DBehavior | None#: Gets or sets the Linearized2DBehavior.

property MiddlePrincipalStress.LoadMultiplier: float | None#: Gets the LoadMultiplier.

property MiddlePrincipalStress.LoadStep: int | None#: Gets the LoadStep.

property MiddlePrincipalStress.LoadStepForMaximumOfMaximumValues: int | None#: Get the Load Step for the maximum of maximum values.

property MiddlePrincipalStress.LoadStepForMaximumOfMinimumValues: int | None#: Get the Load Step for the maximum of minimum values.

property MiddlePrincipalStress.LoadStepForMinimumOfMaximumValues: int | None#: Get the Load Step for the minimum of maximum values.

property MiddlePrincipalStress.LoadStepForMinimumOfMinimumValues: int | None#: Get the Load Step for the minimum of minimum values.

property MiddlePrincipalStress.LoadStepNumber: int | None#: Gets or sets the LoadStepNumber.

property MiddlePrincipalStress.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None#: Gets or sets the Location.

property MiddlePrincipalStress.Maximum: Ansys.Core.Units.Quantity | None#: Gets the Maximum.

property MiddlePrincipalStress.MaximumOccursOn: str | None#: Gets the MaximumOccursOn.

property MiddlePrincipalStress.MaximumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MaximumOfMaximumOverTime.

property MiddlePrincipalStress.MaximumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MaximumOfMinimumOverTime.

property MiddlePrincipalStress.Membrane: Ansys.Core.Units.Quantity | None#: Gets the Membrane.

property MiddlePrincipalStress.MembraneBendingCenter: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingCenter.

property MiddlePrincipalStress.MembraneBendingInside: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingInside.

property MiddlePrincipalStress.MembraneBendingOutside: Ansys.Core.Units.Quantity | None#: Gets the MembraneBendingOutside.

property MiddlePrincipalStress.Minimum: Ansys.Core.Units.Quantity | None#: Gets the Minimum.

property MiddlePrincipalStress.MinimumOccursOn: str | None#: Gets the MinimumOccursOn.

property MiddlePrincipalStress.MinimumOfMaximumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MinimumOfMaximumOverTime.

property MiddlePrincipalStress.MinimumOfMinimumOverTime: Ansys.Core.Units.Quantity | None#: Gets the MinimumOfMinimumOverTime.

property MiddlePrincipalStress.Mode: int | None#: Gets or sets the Mode.

property MiddlePrincipalStress.NamedSelections: Iterable[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None#: Gets or sets the NamedSelections.

property MiddlePrincipalStress.NormalOrientation: Ansys.Mechanical.DataModel.Enums.NormalOrientationType | None#: Gets or sets the NormalOrientation.

property MiddlePrincipalStress.Path: Ansys.ACT.Automation.Mechanical.Path | None#: Path property.

property MiddlePrincipalStress.PeakCenter: Ansys.Core.Units.Quantity | None#: Gets the PeakCenter.

property MiddlePrincipalStress.PeakInside: Ansys.Core.Units.Quantity | None#: Gets the PeakInside.

property MiddlePrincipalStress.PeakOutside: Ansys.Core.Units.Quantity | None#: Gets the PeakOutside.

property MiddlePrincipalStress.PhaseIncrement: Ansys.Core.Units.Quantity | None#: Gets or sets the PhaseIncrement.

property MiddlePrincipalStress.Plies: Iterable[Ansys.ACT.Automation.Mechanical.ImportedPliesCollection] | None#: Plies property.

property MiddlePrincipalStress.PlotData: Ansys.Mechanical.DataModel.Results.ResultDataTable | None#: Gets the result table.

property MiddlePrincipalStress.Ply: Iterable[Ansys.ACT.Automation.Mechanical.AnalysisPly] | None#: Gets or sets the Ply selection.

property MiddlePrincipalStress.Position: Ansys.Mechanical.DataModel.Enums.ShellFaceType | None#: Gets or sets the Position.

property MiddlePrincipalStress.Probability: float | None#: Gets the Probability.

property MiddlePrincipalStress.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties for this object.

property MiddlePrincipalStress.RPMSelection: Ansys.Core.Units.Quantity | None#: Gets or sets the RPM Selection value at which the results are evaluated.

property MiddlePrincipalStress.ReportedFrequency: Ansys.Core.Units.Quantity | None#: Gets the ReportedFrequency.

property MiddlePrincipalStress.SaveAuxiliaryResult: bool | None#: Gets or sets the option to save auxiliary results to disk. This property is valid for results under Modal and Harmonic analyses with On Demand Expansion enabled. An exception is thrown otherwise. Saving result data to disk improves result retrieval and display performance. Note: The project file size will increase.

property MiddlePrincipalStress.ScaleFactor: Ansys.Mechanical.DataModel.Enums.ScaleFactorType | None#: Gets or sets the ScaleFactor.

property MiddlePrincipalStress.ScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None#: Gets or sets the ScopingMethod.

property MiddlePrincipalStress.SetNumber: int | None#: Gets or sets the Set Number.

property MiddlePrincipalStress.SolutionCombinationDriver: Ansys.Mechanical.DataModel.Enums.SolutionCombinationDriverStyle | None#: Gets or sets the SolutionCombinationDriver.

property MiddlePrincipalStress.SolverComponentIDs: str | None#: Gets or sets the SolverComponentIDs.

property MiddlePrincipalStress.StressStrainType: Ansys.Mechanical.DataModel.Enums.StressStrainType | None#: Gets or sets the StressStrainType.

property MiddlePrincipalStress.SubScopeBy: Ansys.Mechanical.DataModel.Enums.SubScopingDefineByType | None#: Gets or sets the SubScopeBy.

property MiddlePrincipalStress.Substep: int | None#: Gets the Substep.

property MiddlePrincipalStress.Subtype: Ansys.Mechanical.DataModel.Enums.LinearizedSubtype | None#: Gets or sets the Subtype.

property MiddlePrincipalStress.Suppressed: bool | None#: Gets or sets the Suppressed.

property MiddlePrincipalStress.Surface: Ansys.ACT.Automation.Mechanical.Surface | None#: Surface property.

property MiddlePrincipalStress.SurfaceCoating: Ansys.ACT.Automation.Mechanical.SurfaceCoating | None#: SurfaceCoating property.

property MiddlePrincipalStress.SweepingPhase: Ansys.Core.Units.Quantity | None#: Gets or sets the SweepingPhase.

property MiddlePrincipalStress.ThroughThicknessBendingStress: Ansys.Mechanical.DataModel.Enums.ThroughThicknessBendingStress | None#: Gets or sets the ThroughThicknessBendingStress.

property MiddlePrincipalStress.Time: Ansys.Core.Units.Quantity | None#: Gets the Time.

property MiddlePrincipalStress.TimeForMaximumOfMaximumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the maximum of maximum values.

property MiddlePrincipalStress.TimeForMaximumOfMinimumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the maximum of minimum values.

property MiddlePrincipalStress.TimeForMinimumOfMaximumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the minimum of maximum values.

property MiddlePrincipalStress.TimeForMinimumOfMinimumValues: Ansys.Core.Units.Quantity | None#: Get the Time for the minimum of minimum values.

property MiddlePrincipalStress.Total: Ansys.Core.Units.Quantity | None#: Gets the Total.

property MiddlePrincipalStress.TotalCenter: Ansys.Core.Units.Quantity | None#: Gets the TotalCenter.

property MiddlePrincipalStress.TotalInside: Ansys.Core.Units.Quantity | None#: Gets the TotalInside.

property MiddlePrincipalStress.TotalOutside: Ansys.Core.Units.Quantity | None#: Gets the TotalOutside.

property MiddlePrincipalStress.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None#: Gets the list of properties that are visible for this object.

Method detail#

MiddlePrincipalStress.Activate() → None#: Activate the current object.

MiddlePrincipalStress.AddAlert() → Ansys.ACT.Automation.Mechanical.Results.Alert#: Creates a new Alert

MiddlePrincipalStress.AddComment() → Ansys.ACT.Automation.Mechanical.Comment#: Creates a new child Comment.

MiddlePrincipalStress.AddConvergence() → Ansys.ACT.Automation.Mechanical.Results.Convergence#: Creates a new Convergence

MiddlePrincipalStress.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure#: Creates a new child Figure.

MiddlePrincipalStress.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image#

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

MiddlePrincipalStress.BodyWhereMaximumOccurs() → Ansys.ACT.Automation.Mechanical.Body#

Gets the body that has the maximum result value.
Throws an exception if body not found.

MiddlePrincipalStress.ClearGeneratedData() → None#: Run the ClearGeneratedData action.

MiddlePrincipalStress.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None#: Copies all visible properties from this object to another.

MiddlePrincipalStress.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: CreateParameter method.

MiddlePrincipalStress.CreateResultsAtAllSets() → List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]#: Creates results at all sets for results under a solution.

MiddlePrincipalStress.Delete() → None#: Run the Delete action.

MiddlePrincipalStress.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Creates a copy of the current DataModelObject.

MiddlePrincipalStress.DuplicateWithoutResults() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject#: Run the DuplicateWithoutResults action.

MiddlePrincipalStress.EvaluateAllResults() → None#: Run the EvaluateAllResults action.

MiddlePrincipalStress.ExportAnimation(filePath: str, format: Ansys.Mechanical.DataModel.Enums.GraphicsAnimationExportFormat, settings: Ansys.Mechanical.Graphics.AnimationExportSettings) → None#: Run the ExportAnimation action.

MiddlePrincipalStress.ExportToTextFile(filePath: str) → None#: Run the ExportToTextFile action.

MiddlePrincipalStress.FetchRemoteResults() → None#: Run the FetchRemoteResult action.

MiddlePrincipalStress.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]#: Gets the list of children, filtered by type.

MiddlePrincipalStress.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter#: Gets the parameter corresponding to the given property.

MiddlePrincipalStress.GroupAllSimilarChildren() → None#: Run the GroupAllSimilarChildren action.

MiddlePrincipalStress.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder#: Run the GroupSimilarObjects action.

MiddlePrincipalStress.PromoteToNamedSelection() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]#: Run the PromoteToNamedSelection action.

MiddlePrincipalStress.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property#

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

MiddlePrincipalStress.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property#: Get a property by its unique name.

MiddlePrincipalStress.RemoveParameter(propName: str) → None#: Removes the parameter from the parameter set corresponding to the given property.

MiddlePrincipalStress.RenameBasedOnDefinition() → None#: Run the RenameBasedOnDefinition action.

MiddlePrincipalStress.RetrieveResult() → None#: Evaluates the individual result without evaluating all the results in the same solution.