ReinforcingPly

class ansys.mechanical.stubs.v261.Ansys.ACT.Automation.Mechanical.ReinforcingPly

Bases: object

This class provides access to the reinforcing ply data that has been imported from an external upstream system of Ansys Composite Prep.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Duplicate	Creates a copy of the current DataModelObject.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.

Properties

Angle	Gets the Angle of the reinforcing ply.
BaseMaterialHandling	Gets the BaseMaterialHandling of the reinforcing ply. This specifies whether the base-element material
Children	Gets the list of children.
Comments	Gets the list of associated comments.
DataModelObjectCategory	Gets the current DataModelObject's category.
Figures	Gets the list of associated figures.
GlobalID	Gets the GlobalID assigned to the base MESH200 elements for the corresponding Reinforcing Ply. This ID is propagated to the reinforcing elements generated by the REINF command and can be used during post-processing to select those reinforcing elements.
IDInSource	Gets the IDInSource as defined in the upstream ACP system.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Material	Gets the Material of the reinforcing ply.
NameInSource	Gets the NameInSource as defined in the upstream ACP system.
NumberOfElements	Gets the NumberOfElements of the reinforcing ply.
NumberOfSections	Gets the NumberOfSections of the reinforcing ply.
Properties	Gets the list of properties for this object.
ReadOnly	Gets or sets the ReadOnly.
ReinforcingBehavior	Gets the ReinforcingBehavior of the reinforcing ply.
ReinforcingType	Gets the ReinforcingType of the reinforcing ply.
StressState	Gets the StressState of the reinforcing ply.
Thickness	Gets the Thickness of the reinforcing ply.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property ReinforcingPly.Angle: Ansys.Core.Units.Quantity | None

Gets the Angle of the reinforcing ply.

property ReinforcingPly.BaseMaterialHandling: Ansys.Mechanical.DataModel.Enums.ReinforcingBaseMaterialHandling | None

Gets the BaseMaterialHandling of the reinforcing ply. This specifies whether the base-element material

in the space occupied by the reinforcing fibers should be retained or removed.

property ReinforcingPly.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property ReinforcingPly.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property ReinforcingPly.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property ReinforcingPly.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property ReinforcingPly.GlobalID: int | None

Gets the GlobalID assigned to the base MESH200 elements for the corresponding Reinforcing Ply. This ID is propagated to the reinforcing elements generated by the REINF command and can be used during post-processing to select those reinforcing elements.

property ReinforcingPly.IDInSource: str | None

Gets the IDInSource as defined in the upstream ACP system.

property ReinforcingPly.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property ReinforcingPly.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSReinforcingPlyAuto | None

Gets the internal object. For advanced usage only.

property ReinforcingPly.Material: str | None

Gets the Material of the reinforcing ply.

property ReinforcingPly.NameInSource: str | None

Gets the NameInSource as defined in the upstream ACP system.

property ReinforcingPly.NumberOfElements: int | None

Gets the NumberOfElements of the reinforcing ply.

property ReinforcingPly.NumberOfSections: int | None

Gets the NumberOfSections of the reinforcing ply.

property ReinforcingPly.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property ReinforcingPly.ReadOnly: bool | None

Gets or sets the ReadOnly.

property ReinforcingPly.ReinforcingBehavior: Ansys.Mechanical.DataModel.Enums.ReinforcingBehavior | None

Gets the ReinforcingBehavior of the reinforcing ply.

property ReinforcingPly.ReinforcingType: Ansys.Mechanical.DataModel.Enums.ReinforcingType | None

Gets the ReinforcingType of the reinforcing ply.

property ReinforcingPly.StressState: Ansys.Mechanical.DataModel.Enums.ReinforcingStressState | None

Gets the StressState of the reinforcing ply.

property ReinforcingPly.Thickness: Ansys.Core.Units.Quantity | None

Gets the Thickness of the reinforcing ply.

property ReinforcingPly.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

ReinforcingPly.Activate() → None

Activate the current object.

ReinforcingPly.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

ReinforcingPly.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

ReinforcingPly.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

ReinforcingPly.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

ReinforcingPly.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

ReinforcingPly.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

ReinforcingPly.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

ReinforcingPly.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

ReinforcingPly.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

ReinforcingPly.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

ReinforcingPly.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

ReinforcingPly.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

ReinforcingPly.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.