Spring

class ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.Connections.Spring

Bases: object

Defines a Spring.

Overview

Methods

Activate	Activate the current object.
AddCommandSnippet	Creates a new CommandSnippet
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PromoteToNamedSelection	Run the PromoteToNamedSelection action.
PromoteToRemotePoint	Run the PromoteToRemotePoint action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.

Properties

Children	Gets the list of children.
Comments	Gets the list of associated comments.
DataModelObjectCategory	Gets the current DataModelObject's category.
Figures	Gets the list of associated figures.
FreeLength	Gets or sets the FreeLength.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Load	Gets or sets the Load.
LongitudinalDamping	Gets or sets the LongitudinalDamping.
LongitudinalStiffness	Gets or sets the constant longitudinal stiffness (expressed in N/m).
Material	Gets or sets the Material.
MobileAppliedBy	Gets or sets the MobileAppliedBy.
MobileBeamCoincidentLengthFactor	Gets or sets the Coincident Length Factor on mobile side that scales the stiffness of the connection between the beam elements and the remote point. This property is applicable when the Behavior property is set to “Beam”. Default: 1.
MobileBeamMaterial	Gets or sets the MobileBeamMaterial.
MobileBeamRadius	Gets or sets the MobileBeamRadius.
MobileBehavior	Gets or sets the MobileBehavior.
MobileBody	Gets the MobileBody.
MobileCoordinateSystem	Gets or sets the MobileCoordinateSystem.
MobileLocation	Gets or sets the MobileLocation.
MobileNodeId	Returns Mobile Node Id.
MobilePinballRegion	Gets or sets the MobilePinballRegion.
MobileScopeLocation	Gets or sets the MobileScopeLocation.
MobileScopingMethod	Gets or sets the MobileScopingMethod.
MobileXCoordinate	Gets or sets the MobileXCoordinate.
MobileYCoordinate	Gets or sets the MobileYCoordinate.
MobileZCoordinate	Gets or sets the MobileZCoordinate.
NonLinearLongitudinalStiffness	Gets the non linear longitudinal stiffness defined in the tabular data.
PreloadType	Gets or sets the PreloadType.
Properties	Gets the list of properties for this object.
ReadOnly	Gets or sets the ReadOnly.
ReferenceAppliedBy	Gets or sets the ReferenceAppliedBy.
ReferenceBeamCoincidentLengthFactor	Gets or sets the Coincident Length Factor on reference side that scales the stiffness of the connection between the beam elements and the remote point. This property is applicable when the Behavior property is set to “Beam”. Default: 1.
ReferenceBeamMaterial	Gets or sets the ReferenceBeamMaterial.
ReferenceBeamRadius	Gets or sets the ReferenceBeamRadius.
ReferenceBehavior	Gets or sets the ReferenceBehavior.
ReferenceBody	Gets the ReferenceBody.
ReferenceCoordinateSystem	Gets or sets the ReferenceCoordinateSystem.
ReferenceLocation	Gets or sets the ReferenceLocation.
ReferenceNodeId	Returns Reference Node Id.
ReferencePinballRegion	Gets or sets the ReferencePinballRegion.
ReferenceScopeLocation	Gets or sets the ReferenceScopeLocation.
ReferenceScopingMethod	Gets or sets the ReferenceScopingMethod.
ReferenceXCoordinate	Gets or sets the ReferenceXCoordinate.
ReferenceYCoordinate	Gets or sets the ReferenceYCoordinate.
ReferenceZCoordinate	Gets or sets the ReferenceZCoordinate.
Rotation	Gets or sets the Rotation.
Scope	Gets or sets the Scope.
SpringBehavior	Gets or sets the SpringBehavior.
SpringElementAPDLName	Gets or sets the SpringElementAPDLName.
SpringLength	Gets the SpringLength.
SpringType	Gets or sets the SpringType.
Suppressed	Gets or sets the Suppressed.
Torque	Gets or sets the Torque.
TorsionalDamping	Gets or sets the TorsionalDamping.
TorsionalStiffness	Gets or sets the TorsionalStiffness.
Visible	Gets or sets the Visible.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property Spring.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property Spring.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property Spring.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property Spring.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property Spring.FreeLength: Ansys.Core.Units.Quantity | None

Gets or sets the FreeLength.

property Spring.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property Spring.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSSpringAuto | None

Gets the internal object. For advanced usage only.

property Spring.Load: Ansys.Core.Units.Quantity | None

Gets or sets the Load.

property Spring.LongitudinalDamping: Ansys.Core.Units.Quantity | None

Gets or sets the LongitudinalDamping.

property Spring.LongitudinalStiffness: Ansys.Core.Units.Quantity | None

Gets or sets the constant longitudinal stiffness (expressed in N/m).

property Spring.Material: str | None

Gets or sets the Material.

property Spring.MobileAppliedBy: Ansys.Mechanical.DataModel.Enums.RemoteApplicationType | None

Gets or sets the MobileAppliedBy.

property Spring.MobileBeamCoincidentLengthFactor: float | None

Gets or sets the Coincident Length Factor on mobile side that scales the stiffness of the connection between the beam elements and the remote point. This property is applicable when the Behavior property is set to “Beam”. Default: 1.

property Spring.MobileBeamMaterial: str | None

Gets or sets the MobileBeamMaterial.

property Spring.MobileBeamRadius: Ansys.Core.Units.Quantity | None

Gets or sets the MobileBeamRadius.

property Spring.MobileBehavior: Ansys.Mechanical.DataModel.Enums.LoadBehavior | None

Gets or sets the MobileBehavior.

property Spring.MobileBody: str | None

Gets the MobileBody.

property Spring.MobileCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the MobileCoordinateSystem.

property Spring.MobileLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the MobileLocation.

property Spring.MobileNodeId: int | None

Returns Mobile Node Id.

property Spring.MobilePinballRegion: Ansys.Core.Units.Quantity | None

Gets or sets the MobilePinballRegion.

property Spring.MobileScopeLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the MobileScopeLocation.

property Spring.MobileScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the MobileScopingMethod.

property Spring.MobileXCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the MobileXCoordinate.

property Spring.MobileYCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the MobileYCoordinate.

property Spring.MobileZCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the MobileZCoordinate.

property Spring.NonLinearLongitudinalStiffness: Ansys.ACT.Mechanical.Fields.Field | None

Gets the non linear longitudinal stiffness defined in the tabular data.

property Spring.PreloadType: Ansys.Mechanical.DataModel.Enums.SpringPreloadType | None

Gets or sets the PreloadType.

property Spring.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property Spring.ReadOnly: bool | None

Gets or sets the ReadOnly.

property Spring.ReferenceAppliedBy: Ansys.Mechanical.DataModel.Enums.RemoteApplicationType | None

Gets or sets the ReferenceAppliedBy.

property Spring.ReferenceBeamCoincidentLengthFactor: float | None

Gets or sets the Coincident Length Factor on reference side that scales the stiffness of the connection between the beam elements and the remote point. This property is applicable when the Behavior property is set to “Beam”. Default: 1.

property Spring.ReferenceBeamMaterial: str | None

Gets or sets the ReferenceBeamMaterial.

property Spring.ReferenceBeamRadius: Ansys.Core.Units.Quantity | None

Gets or sets the ReferenceBeamRadius.

property Spring.ReferenceBehavior: Ansys.Mechanical.DataModel.Enums.LoadBehavior | None

Gets or sets the ReferenceBehavior.

property Spring.ReferenceBody: str | None

Gets the ReferenceBody.

property Spring.ReferenceCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the ReferenceCoordinateSystem.

property Spring.ReferenceLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the ReferenceLocation.

property Spring.ReferenceNodeId: int | None

Returns Reference Node Id.

property Spring.ReferencePinballRegion: Ansys.Core.Units.Quantity | None

Gets or sets the ReferencePinballRegion.

property Spring.ReferenceScopeLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the ReferenceScopeLocation.

property Spring.ReferenceScopingMethod: Ansys.Mechanical.DataModel.Enums.GeometryDefineByType | None

Gets or sets the ReferenceScopingMethod.

property Spring.ReferenceXCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the ReferenceXCoordinate.

property Spring.ReferenceYCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the ReferenceYCoordinate.

property Spring.ReferenceZCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the ReferenceZCoordinate.

property Spring.Rotation: Ansys.Core.Units.Quantity | None

Gets or sets the Rotation.

property Spring.Scope: Ansys.Mechanical.DataModel.Enums.SpringScopingType | None

Gets or sets the Scope.

property Spring.SpringBehavior: Ansys.Mechanical.DataModel.Enums.SpringBehavior | None

Gets or sets the SpringBehavior.

property Spring.SpringElementAPDLName: str | None

Gets or sets the SpringElementAPDLName.

property Spring.SpringLength: Ansys.Core.Units.Quantity | None

Gets the SpringLength.

property Spring.SpringType: Ansys.Mechanical.DataModel.Enums.SpringType | None

Gets or sets the SpringType.

property Spring.Suppressed: bool | None

Gets or sets the Suppressed.

property Spring.Torque: Ansys.Core.Units.Quantity | None

Gets or sets the Torque.

property Spring.TorsionalDamping: Ansys.Core.Units.Quantity | None

Gets or sets the TorsionalDamping.

property Spring.TorsionalStiffness: Ansys.Core.Units.Quantity | None

Gets or sets the TorsionalStiffness.

property Spring.Visible: bool | None

Gets or sets the Visible.

property Spring.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

Spring.Activate() → None

Activate the current object.

Spring.AddCommandSnippet() → Ansys.ACT.Automation.Mechanical.CommandSnippet

Creates a new CommandSnippet

Spring.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

Spring.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

Spring.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

Spring.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

Spring.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

Spring.Delete() → None

Run the Delete action.

Spring.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

Spring.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

Spring.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

Spring.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

Spring.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

Spring.PromoteToNamedSelection() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]

Run the PromoteToNamedSelection action.

Spring.PromoteToRemotePoint() → Iterable[Ansys.ACT.Automation.Mechanical.RemotePoint]

Run the PromoteToRemotePoint action.

Spring.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

Spring.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

Spring.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

Spring.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.