Beam

class ansys.mechanical.stubs.v252.Ansys.ACT.Automation.Mechanical.Connections.Beam

Bases: object

Defines a Beam.

Overview

Methods

Activate	Activate the current object.
AddCommandSnippet	Creates a new CommandSnippet
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PromoteToNamedSelection	Run the PromoteToNamedSelection action.
PromoteToRemotePoint	Run the PromoteToRemotePoint action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
RenameBasedOnDefinition	Run the RenameBasedOnDefinition action.

Properties

BeamElementAPDLName	Gets or sets the BeamElementAPDLName.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
CrossSection	Gets the CrossSection.
DataModelObjectCategory	Gets the current DataModelObject's category.
Figures	Gets the list of associated figures.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Material	Gets or sets the Material.
MobileAppliedBy	Gets or sets the MobileAppliedBy.
MobileBeamCoincidentLengthFactor	Gets or sets the Coincident Length Factor on mobile side that scales the stiffness of the connection between the beam elements and the remote point. This property is applicable when the Behavior property is set to “Beam”. Default: 1.
MobileBeamMaterial	Gets or sets the MobileBeamMaterial.
MobileBeamRadius	Gets or sets the MobileBeamRadius.
MobileBehavior	Gets or sets the MobileBehavior.
MobileBody	Gets the MobileBody.
MobileCoordinateSystem	Gets or sets the MobileCoordinateSystem.
MobileLocation	Gets or sets the MobileLocation.
MobileNodeId	Returns Mobile Node Id.
MobilePinballRegion	Gets or sets the MobilePinballRegion.
MobileXCoordinate	Gets or sets the MobileXCoordinate.
MobileYCoordinate	Gets or sets the MobileYCoordinate.
MobileZCoordinate	Gets or sets the MobileZCoordinate.
Properties	Gets the list of properties for this object.
Radius	Gets or sets the Radius.
ReadOnly	Gets or sets the ReadOnly.
ReferenceAppliedBy	Gets or sets the ReferenceAppliedBy.
ReferenceBeamCoincidentLengthFactor	Gets or sets the Coincident Length Factor on reference side that scales the stiffness of the connection between the beam elements and the remote point. This property is applicable when the Behavior property is set to “Beam”. Default: 1.
ReferenceBeamMaterial	Gets or sets the ReferenceBeamMaterial.
ReferenceBeamRadius	Gets or sets the ReferenceBeamRadius.
ReferenceBehavior	Gets or sets the ReferenceBehavior.
ReferenceBody	Gets the ReferenceBody.
ReferenceCoordinateSystem	Gets or sets the ReferenceCoordinateSystem.
ReferenceLocation	Gets or sets the ReferenceLocation.
ReferenceLocationPoint	Gets or sets the ReferenceLocationPoint.
ReferenceNodeId	Returns Reference Node Id.
ReferencePinballRegion	Gets or sets the ReferencePinballRegion.
ReferenceXCoordinate	Gets or sets the ReferenceXCoordinate.
ReferenceYCoordinate	Gets or sets the ReferenceYCoordinate.
ReferenceZCoordinate	Gets or sets the ReferenceZCoordinate.
Scope	Gets or sets the Scope.
Suppressed	Gets or sets the Suppressed.
Visible	Gets or sets the Visible.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property Beam.BeamElementAPDLName: str | None

Gets or sets the BeamElementAPDLName.

property Beam.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property Beam.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property Beam.CrossSection: Ansys.Mechanical.DataModel.Enums.CrossSectionType | None

Gets the CrossSection.

property Beam.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property Beam.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property Beam.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property Beam.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSBeamConnectionAuto | None

Gets the internal object. For advanced usage only.

property Beam.Material: str | None

Gets or sets the Material.

property Beam.MobileAppliedBy: Ansys.Mechanical.DataModel.Enums.RemoteApplicationType | None

Gets or sets the MobileAppliedBy.

property Beam.MobileBeamCoincidentLengthFactor: float | None

Gets or sets the Coincident Length Factor on mobile side that scales the stiffness of the connection between the beam elements and the remote point. This property is applicable when the Behavior property is set to “Beam”. Default: 1.

property Beam.MobileBeamMaterial: str | None

Gets or sets the MobileBeamMaterial.

property Beam.MobileBeamRadius: Ansys.Core.Units.Quantity | None

Gets or sets the MobileBeamRadius.

property Beam.MobileBehavior: Ansys.Mechanical.DataModel.Enums.LoadBehavior | None

Gets or sets the MobileBehavior.

property Beam.MobileBody: str | None

Gets the MobileBody.

property Beam.MobileCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the MobileCoordinateSystem.

property Beam.MobileLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the MobileLocation.

property Beam.MobileNodeId: int | None

Returns Mobile Node Id.

property Beam.MobilePinballRegion: Ansys.Core.Units.Quantity | None

Gets or sets the MobilePinballRegion.

property Beam.MobileXCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the MobileXCoordinate.

property Beam.MobileYCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the MobileYCoordinate.

property Beam.MobileZCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the MobileZCoordinate.

property Beam.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property Beam.Radius: Ansys.Core.Units.Quantity | None

Gets or sets the Radius.

property Beam.ReadOnly: bool | None

Gets or sets the ReadOnly.

property Beam.ReferenceAppliedBy: Ansys.Mechanical.DataModel.Enums.RemoteApplicationType | None

Gets or sets the ReferenceAppliedBy.

property Beam.ReferenceBeamCoincidentLengthFactor: float | None

Gets or sets the Coincident Length Factor on reference side that scales the stiffness of the connection between the beam elements and the remote point. This property is applicable when the Behavior property is set to “Beam”. Default: 1.

property Beam.ReferenceBeamMaterial: str | None

Gets or sets the ReferenceBeamMaterial.

property Beam.ReferenceBeamRadius: Ansys.Core.Units.Quantity | None

Gets or sets the ReferenceBeamRadius.

property Beam.ReferenceBehavior: Ansys.Mechanical.DataModel.Enums.LoadBehavior | None

Gets or sets the ReferenceBehavior.

property Beam.ReferenceBody: str | None

Gets the ReferenceBody.

property Beam.ReferenceCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the ReferenceCoordinateSystem.

property Beam.ReferenceLocation: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the ReferenceLocation.

property Beam.ReferenceLocationPoint: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the ReferenceLocationPoint.

property Beam.ReferenceNodeId: int | None

Returns Reference Node Id.

property Beam.ReferencePinballRegion: Ansys.Core.Units.Quantity | None

Gets or sets the ReferencePinballRegion.

property Beam.ReferenceXCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the ReferenceXCoordinate.

property Beam.ReferenceYCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the ReferenceYCoordinate.

property Beam.ReferenceZCoordinate: Ansys.Core.Units.Quantity | None

Gets or sets the ReferenceZCoordinate.

property Beam.Scope: Ansys.Mechanical.DataModel.Enums.SpringScopingType | None

Gets or sets the Scope.

property Beam.Suppressed: bool | None

Gets or sets the Suppressed.

property Beam.Visible: bool | None

Gets or sets the Visible.

property Beam.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

Beam.Activate() → None

Activate the current object.

Beam.AddCommandSnippet() → Ansys.ACT.Automation.Mechanical.CommandSnippet

Creates a new CommandSnippet

Beam.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

Beam.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

Beam.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

Beam.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

Beam.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

Beam.Delete() → None

Run the Delete action.

Beam.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

Beam.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

Beam.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

Beam.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

Beam.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

Beam.PromoteToNamedSelection() → Iterable[Ansys.ACT.Automation.Mechanical.NamedSelection]

Run the PromoteToNamedSelection action.

Beam.PromoteToRemotePoint() → Iterable[Ansys.ACT.Automation.Mechanical.RemotePoint]

Run the PromoteToRemotePoint action.

Beam.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

Beam.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

Beam.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

Beam.RenameBasedOnDefinition() → None

Run the RenameBasedOnDefinition action.