LoadGroup

class ansys.mechanical.stubs.v251.Ansys.ACT.Automation.Mechanical.BoundaryConditions.LoadGroup

Bases: object

Defines a LoadGroup.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddCurrent	Creates a new Current
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
AddVoltage	Creates a new Voltage
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
DeleteChildren	Run the DeleteChildren action with optional verification dialog.
Duplicate	Creates a copy of the current DataModelObject.
GenerateRemoteLoads	Run the action to generate the remote loads from the source data.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.

Properties

Children	Gets the list of children.
Comments	Gets the list of associated comments.
ConductingArea	Gets or sets the ConductingArea.
ConductorCurrent	Gets or sets the ConductorCurrent.
ConductorType	Gets or sets the ConductorType.
CoordinateSystem	Gets or sets the CoordinateSystem.
DataImportStatus	Gets the DataImportStatus.
DataModelObjectCategory	Gets the current DataModelObject's category.
Figures	Gets the list of associated figures.
FilterByOrder	Gets or sets whether imported remote loads are filtered by order. The order is specified in the Orders property.
GroupingType	Gets or sets the GroupingType.
Images	Gets the list of associated images.
ImportedDataType	Gets or sets the ImportedDataType.
InternalObject	Gets the internal object. For advanced usage only.
InterpolateRPM	Gets or Sets the Interpolate RPM.
Location	Gets or sets the Location.
NumberOfFrequenciesToConsider	Gets or sets the NumberOfFrequenciesToConsider.
NumberOfPoints	Gets or Sets the Number of Points.
NumberOfTurns	Gets or sets the NumberOfTurns.
OnDataRefreshOption	Gets or sets the OnDataRefreshOption.
Orders	Gets or Sets the Orders. These orders are imported from the maxwell solution and the Analysis Settings will be synced with the orders specified.
PhaseAngle	Gets or sets the PhaseAngle.
Properties	Gets the list of properties for this object.
RPMFileSelection	Gets or Sets the File Selection (.csv) for User Defined RPM Interpolation.
SolutionId	Gets or sets the SolutionId.
Suppressed	Gets or sets the Suppressed.
TransferFileName	Gets or sets the TransferFileName.
UseInternalRemotePoints	Gets or sets the UseInternalRemotePoints.
VisibleProperties	Gets the list of properties that are visible for this object.

Property detail

property LoadGroup.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property LoadGroup.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property LoadGroup.ConductingArea: Ansys.Core.Units.Quantity | None

Gets or sets the ConductingArea.

property LoadGroup.ConductorCurrent: Ansys.Core.Units.Quantity | None

Gets or sets the ConductorCurrent.

property LoadGroup.ConductorType: Ansys.Mechanical.DataModel.Enums.SourceConductorType | None

Gets or sets the ConductorType.

property LoadGroup.CoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Gets or sets the CoordinateSystem.

property LoadGroup.DataImportStatus: Ansys.Mechanical.DataModel.Enums.DataImportStatus | None

Gets the DataImportStatus.

property LoadGroup.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property LoadGroup.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property LoadGroup.FilterByOrder: bool | None

Gets or sets whether imported remote loads are filtered by order. The order is specified in the Orders property.

property LoadGroup.GroupingType: Ansys.Mechanical.DataModel.Enums.LoadGroupingType | None

Gets or sets the GroupingType.

property LoadGroup.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property LoadGroup.ImportedDataType: Ansys.Mechanical.DataModel.Enums.DataTypeOptions | None

Gets or sets the ImportedDataType.

property LoadGroup.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSLoadGroupAuto | None

Gets the internal object. For advanced usage only.

property LoadGroup.InterpolateRPM: Ansys.Mechanical.DataModel.Enums.InterpolateRPM | None

Gets or Sets the Interpolate RPM.

property LoadGroup.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property LoadGroup.NumberOfFrequenciesToConsider: int | None

Gets or sets the NumberOfFrequenciesToConsider.

property LoadGroup.NumberOfPoints: int | None

Gets or Sets the Number of Points.

property LoadGroup.NumberOfTurns: int | None

Gets or sets the NumberOfTurns.

property LoadGroup.OnDataRefreshOption: Ansys.Mechanical.DataModel.Enums.RemotePointUpdateOptions | None

Gets or sets the OnDataRefreshOption.

property LoadGroup.Orders: str | None

Gets or Sets the Orders. These orders are imported from the maxwell solution and the Analysis Settings will be synced with the orders specified.

property LoadGroup.PhaseAngle: Ansys.Core.Units.Quantity | None

Gets or sets the PhaseAngle.

property LoadGroup.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property LoadGroup.RPMFileSelection: str | None

Gets or Sets the File Selection (.csv) for User Defined RPM Interpolation.

property LoadGroup.SolutionId: int | None

Gets or sets the SolutionId.

property LoadGroup.Suppressed: bool | None

Gets or sets the Suppressed.

property LoadGroup.TransferFileName: str | None

Gets or sets the TransferFileName.

property LoadGroup.UseInternalRemotePoints: bool | None

Gets or sets the UseInternalRemotePoints.

property LoadGroup.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

Method detail

LoadGroup.Activate() → None

Activate the current object.

LoadGroup.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

LoadGroup.AddCurrent() → Ansys.ACT.Automation.Mechanical.BoundaryConditions.Current

Creates a new Current

LoadGroup.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

LoadGroup.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

LoadGroup.AddVoltage() → Ansys.ACT.Automation.Mechanical.BoundaryConditions.Voltage

Creates a new Voltage

LoadGroup.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

LoadGroup.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

LoadGroup.Delete() → None

Run the Delete action.

LoadGroup.DeleteChildren(verificationDialog: bool) → None

Run the DeleteChildren action with optional verification dialog.

LoadGroup.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

LoadGroup.GenerateRemoteLoads() → None

Run the action to generate the remote loads from the source data.

LoadGroup.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

LoadGroup.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

LoadGroup.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

LoadGroup.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

LoadGroup.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

LoadGroup.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

LoadGroup.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.