ImportedInitialStress

class ansys.mechanical.stubs.Ansys.ACT.Automation.Mechanical.ImportedLoads.ImportedInitialStress

Bases: object

Defines a ImportedInitialStress.

Overview

Methods

Activate	Activate the current object.
AddComment	Creates a new child Comment.
AddFigure	Creates a new child Figure.
AddImage	Creates a new child Image.
AddMappingValidation	Creates a new MappingValidation
ClearGeneratedData	Run the ClearGeneratedData action.
CopyTo	Copies all visible properties from this object to another.
CreateParameter	Creates a new parameter for a Property.
Delete	Run the Delete action.
Duplicate	Creates a copy of the current DataModelObject.
ExportToTextFile	Run the ExportToTextFile action.
GetActivateAtLoadStep	GetActivateAtLoadStep method.
GetChildren	Gets the list of children, filtered by type.
GetParameter	Gets the parameter corresponding to the given property.
GroupAllSimilarChildren	Run the GroupAllSimilarChildren action.
GroupSimilarObjects	Run the GroupSimilarObjects action.
Import	Import.
ImportLoad	Run the ImportLoad action.
PropertyByAPIName	Get a property by its API name.
PropertyByName	Get a property by its unique name.
ReloadConfiguration	Reload the Imported Load's setup from its associated configuration file (if available).
RemoveParameter	Removes the parameter from the parameter set corresponding to the given property.
SetActivateAtLoadStep	SetActivateAtLoadStep method.
SyncAnalysisFrequencies	Synchronizes the analysis settings' RPMs and frequencies based on the selected imported load.

Properties

Algorithm	Algorithm property.
ApplyAs	This controls how the imported load is applied, either as a boundary condition or an initial condition.
BoundingBoxTolerance	BoundingBoxTolerance property.
Children	Gets the list of children.
Comments	Gets the list of associated comments.
CreateNameSelectionForMappedNodes	CreateNameSelectionForMappedNodes property.
CreateNameSelectionForOutsideNodes	CreateNameSelectionForOutsideNodes property.
CreateNameSelectionForUnmappedNodes	CreateNameSelectionForUnmappedNodes property.
DataModelObjectCategory	Gets the current DataModelObject's category.
DisplayInteriorPoints	DisplayInteriorPoints property.
DisplayProjectionPlane	DisplayProjectionPlane property.
DisplaySourcePointIds	DisplaySourcePointIds property.
DisplaySourcePoints	DisplaySourcePoints property.
ExtrapolationTolerancePercent	ExtrapolationTolerancePercent property.
Figures	Gets the list of associated figures.
Images	Gets the list of associated images.
InternalObject	Gets the internal object. For advanced usage only.
Interpolation	Interpolation property.
KrigingCorrelationFunction	KrigingCorrelationFunction property.
KrigingPolynom	KrigingPolynom property.
Limit	Limit property.
Location	Gets or sets the Location.
MappedNodesName	MappedNodesName property.
Mapping	Mapping property.
MappingControl	MappingControl property.
MaxOutsideDistance	MaxOutsideDistance property.
Method	Method property.
NumberOfPoints	NumberOfPoints property.
OrientationRealignment	OrientationRealignment property.
OutsideDistanceCheck	OutsideDistanceCheck property.
OutsideNodesName	OutsideNodesName property.
OutsideOption	OutsideOption property.
Pinball	Pinball property.
Projection	Projection property.
Properties	Gets the list of properties for this object.
RigidBodyTransformationType	RigidBodyTransformationType property.
RigidTransformSourceCoordinateSystem	RigidTransformSourceCoordinateSystem property.
RigidTransformTargetCoordinateSystem	RigidTransformTargetCoordinateSystem property.
SharedRefBody	Gets or sets the SharedRefBody.
ShellThicknessFactor	ShellThicknessFactor property.
SourceMaximum	SourceMaximum property.
SourceMinimum	SourceMinimum property.
Suppressed	Gets or sets the Suppressed.
UnmappedNodesName	UnmappedNodesName property.
VariableType	VariableType property.
VisibleProperties	Gets the list of properties that are visible for this object.
Weighting	Weighting property.

Property detail

property ImportedInitialStress.Algorithm: Ansys.Mechanical.DataModel.Enums.MappingAlgorithm | None

Algorithm property.

property ImportedInitialStress.ApplyAs: Ansys.Mechanical.DataModel.Enums.ExternalLoadApplicationType | None

This controls how the imported load is applied, either as a boundary condition or an initial condition.

property ImportedInitialStress.BoundingBoxTolerance: Ansys.Core.Units.Quantity | None

BoundingBoxTolerance property.

property ImportedInitialStress.Children: List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject] | None

Gets the list of children.

property ImportedInitialStress.Comments: Iterable[Ansys.ACT.Automation.Mechanical.Comment] | None

Gets the list of associated comments.

property ImportedInitialStress.CreateNameSelectionForMappedNodes: bool | None

CreateNameSelectionForMappedNodes property.

property ImportedInitialStress.CreateNameSelectionForOutsideNodes: bool | None

CreateNameSelectionForOutsideNodes property.

property ImportedInitialStress.CreateNameSelectionForUnmappedNodes: bool | None

CreateNameSelectionForUnmappedNodes property.

property ImportedInitialStress.DataModelObjectCategory: Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory | None

Gets the current DataModelObject's category.

property ImportedInitialStress.DisplayInteriorPoints: bool | None

DisplayInteriorPoints property.

property ImportedInitialStress.DisplayProjectionPlane: bool | None

DisplayProjectionPlane property.

property ImportedInitialStress.DisplaySourcePointIds: bool | None

DisplaySourcePointIds property.

property ImportedInitialStress.DisplaySourcePoints: bool | None

DisplaySourcePoints property.

property ImportedInitialStress.ExtrapolationTolerancePercent: float | None

ExtrapolationTolerancePercent property.

property ImportedInitialStress.Figures: Iterable[Ansys.ACT.Automation.Mechanical.Figure] | None

Gets the list of associated figures.

property ImportedInitialStress.Images: Iterable[Ansys.ACT.Automation.Mechanical.Image] | None

Gets the list of associated images.

property ImportedInitialStress.InternalObject: Ansys.Common.Interop.DSObjectsAuto.IDSExternalLoadAuto | None

Gets the internal object. For advanced usage only.

property ImportedInitialStress.Interpolation: Ansys.Mechanical.DataModel.Enums.InterpolationType | None

Interpolation property.

property ImportedInitialStress.KrigingCorrelationFunction: Ansys.Mechanical.DataModel.Enums.KrigingCorrFuncType | None

KrigingCorrelationFunction property.

property ImportedInitialStress.KrigingPolynom: Ansys.Mechanical.DataModel.Enums.KrigingPolynomType | None

KrigingPolynom property.

property ImportedInitialStress.Limit: int | None

Limit property.

property ImportedInitialStress.Location: Ansys.ACT.Interfaces.Common.ISelectionInfo | None

Gets or sets the Location.

property ImportedInitialStress.MappedNodesName: str | None

MappedNodesName property.

property ImportedInitialStress.Mapping: Ansys.Mechanical.DataModel.Enums.MappingInterpolationType | None

Mapping property.

property ImportedInitialStress.MappingControl: Ansys.Mechanical.DataModel.Enums.MappingControlType | None

MappingControl property.

property ImportedInitialStress.MaxOutsideDistance: Ansys.Core.Units.Quantity | None

MaxOutsideDistance property.

property ImportedInitialStress.Method: Ansys.Mechanical.DataModel.Enums.MappingMethod | None

Method property.

property ImportedInitialStress.NumberOfPoints: int | None

NumberOfPoints property.

property ImportedInitialStress.OrientationRealignment: bool | None

OrientationRealignment property.

property ImportedInitialStress.OutsideDistanceCheck: bool | None

OutsideDistanceCheck property.

property ImportedInitialStress.OutsideNodesName: str | None

OutsideNodesName property.

property ImportedInitialStress.OutsideOption: Ansys.Mechanical.DataModel.Enums.MappingOutsideOption | None

OutsideOption property.

property ImportedInitialStress.Pinball: Ansys.Core.Units.Quantity | None

Pinball property.

property ImportedInitialStress.Projection: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

Projection property.

property ImportedInitialStress.Properties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties for this object.

property ImportedInitialStress.RigidBodyTransformationType: Ansys.Mechanical.DataModel.Enums.RigidBodyTransformationType | None

RigidBodyTransformationType property.

property ImportedInitialStress.RigidTransformSourceCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

RigidTransformSourceCoordinateSystem property.

property ImportedInitialStress.RigidTransformTargetCoordinateSystem: Ansys.ACT.Automation.Mechanical.CoordinateSystem | None

RigidTransformTargetCoordinateSystem property.

property ImportedInitialStress.SharedRefBody: Ansys.ACT.Automation.Mechanical.Body | None

Gets or sets the SharedRefBody.

property ImportedInitialStress.ShellThicknessFactor: float | None

ShellThicknessFactor property.

property ImportedInitialStress.SourceMaximum: Ansys.Core.Units.Quantity | None

SourceMaximum property.

property ImportedInitialStress.SourceMinimum: Ansys.Core.Units.Quantity | None

SourceMinimum property.

property ImportedInitialStress.Suppressed: bool | None

Gets or sets the Suppressed.

property ImportedInitialStress.UnmappedNodesName: str | None

UnmappedNodesName property.

property ImportedInitialStress.VariableType: Ansys.Mechanical.DataModel.Enums.MappingVariableType | None

VariableType property.

property ImportedInitialStress.VisibleProperties: tuple[Ansys.ACT.Automation.Mechanical.Property] | None

Gets the list of properties that are visible for this object.

property ImportedInitialStress.Weighting: Ansys.Mechanical.DataModel.Enums.WeightingType | None

Weighting property.

Method detail

ImportedInitialStress.Activate() → None

Activate the current object.

ImportedInitialStress.AddComment() → Ansys.ACT.Automation.Mechanical.Comment

Creates a new child Comment.

ImportedInitialStress.AddFigure() → Ansys.ACT.Automation.Mechanical.Figure

Creates a new child Figure.

ImportedInitialStress.AddImage(filePath: str) → Ansys.ACT.Automation.Mechanical.Image

Creates a new child Image.
If a filePath is provided, the image will be loaded from that file,
if not, the image will be a screen capture of the Geometry window.

ImportedInitialStress.AddMappingValidation() → Ansys.ACT.Automation.Mechanical.MappingValidation

Creates a new MappingValidation

ImportedInitialStress.ClearGeneratedData() → None

Run the ClearGeneratedData action.

ImportedInitialStress.CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) → None

Copies all visible properties from this object to another.

ImportedInitialStress.CreateParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Creates a new parameter for a Property.

ImportedInitialStress.Delete() → None

Run the Delete action.

ImportedInitialStress.Duplicate() → Ansys.Mechanical.DataModel.Interfaces.IDataModelObject

Creates a copy of the current DataModelObject.

ImportedInitialStress.ExportToTextFile(filePath: str) → None

Run the ExportToTextFile action.

ImportedInitialStress.GetActivateAtLoadStep(stepNumber: int) → bool

GetActivateAtLoadStep method.

ImportedInitialStress.GetChildren(recurses: bool, children: List[ChildrenType]) → List[ChildrenType]

Gets the list of children, filtered by type.

ImportedInitialStress.GetParameter(propName: str) → Ansys.ACT.Interfaces.Mechanical.IParameter

Gets the parameter corresponding to the given property.

ImportedInitialStress.GroupAllSimilarChildren() → None

Run the GroupAllSimilarChildren action.

ImportedInitialStress.GroupSimilarObjects() → Ansys.ACT.Automation.Mechanical.TreeGroupingFolder

Run the GroupSimilarObjects action.

ImportedInitialStress.Import() → None

Import.

ImportedInitialStress.ImportLoad() → None

Run the ImportLoad action.

ImportedInitialStress.PropertyByAPIName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its API name.
If multiple properties have the same API Name, only the first property with that name will be returned.

ImportedInitialStress.PropertyByName(name: str) → Ansys.ACT.Automation.Mechanical.Property

Get a property by its unique name.

ImportedInitialStress.ReloadConfiguration() → None

Reload the Imported Load's setup from its associated configuration file (if available).

ImportedInitialStress.RemoveParameter(propName: str) → None

Removes the parameter from the parameter set corresponding to the given property.

ImportedInitialStress.SetActivateAtLoadStep(stepNumber: int, bActive: bool) → None

SetActivateAtLoadStep method.

ImportedInitialStress.SyncAnalysisFrequencies() → None

Synchronizes the analysis settings' RPMs and frequencies based on the selected imported load.
    A `NotSupportedException` exception will be thrown when called with any non-supported imported loads.