.. vale off :class:`EXDAnalysisSettings` ============================ .. py:class:: ansys.mechanical.stubs.Ansys.ACT.Automation.Mechanical.AnalysisSettings.EXDAnalysisSettings Bases: :py:obj:`object` Defines Analysis Settings for Explicit Dynamics System. Note: Cycles in the UI are referred to as TimeSteps in API .. !! processed by numpydoc !! .. py:currentmodule:: EXDAnalysisSettings Overview -------- .. tab-set:: .. tab-item:: Methods .. list-table:: :header-rows: 0 :widths: auto * - :py:attr:`~Activate` - Activate the current object. * - :py:attr:`~AddComment` - Creates a new child Comment. * - :py:attr:`~AddFigure` - Creates a new child Figure. * - :py:attr:`~AddImage` - Creates a new child Image. * - :py:attr:`~CopyTo` - Copies all visible properties from this object to another. * - :py:attr:`~CreateParameter` - Creates a new parameter for a Property. * - :py:attr:`~DeleteAllRestartPoints` - DeleteAllRestartPoints method. * - :py:attr:`~Duplicate` - Creates a copy of the current DataModelObject. * - :py:attr:`~GetAutomaticMassScalingType` - Gets the AutomaticMassScalingType for a load step. * - :py:attr:`~GetChildren` - Gets the list of children, filtered by type. * - :py:attr:`~GetLoadStepType` - Gets the LoadStepType for a step. * - :py:attr:`~GetMassScalingMinTimeStep` - Gets the MassScalingMinTimeStep for a load step. * - :py:attr:`~GetParameter` - Gets the parameter corresponding to the given property. * - :py:attr:`~GetSaveProbeDataOnTime` - Gets the Time increment for Save ProbeData On for a load step. * - :py:attr:`~GetSaveProbeDataOnTimeSteps` - Gets the Cycle increment for Save ProbeData On for a load step. * - :py:attr:`~GetSaveProbeDataOnType` - Gets the Save ProbeData Type for a load step. * - :py:attr:`~GetSaveRestartsOnPoints` - Gets the Points increment for Save Restarts On Points for a load step. * - :py:attr:`~GetSaveRestartsOnTime` - Gets the Time increment for Save Restarts On for a load step. * - :py:attr:`~GetSaveRestartsOnTimeSteps` - Gets the Cycle increment for Save Restarts On for a load step. * - :py:attr:`~GetSaveRestartsOnType` - Gets the Save Restarts Type for a load step. * - :py:attr:`~GetSaveResultsOnPoints` - Gets the Points increment for Save Results On for a load step. * - :py:attr:`~GetSaveResultsOnTime` - Gets the Time increment for Save Results On for a load step. * - :py:attr:`~GetSaveResultsOnTimeSteps` - Gets the Cycle increment for Save Results On for a load step. * - :py:attr:`~GetSaveResultsOnType` - Gets the Save Results Type for a load step. * - :py:attr:`~GetStaticDamping` - Gets the StaticDamping. * - :py:attr:`~GetStepEndTime` - Gets the Step End Time at a given solution step. * - :py:attr:`~GroupAllSimilarChildren` - Run the GroupAllSimilarChildren action. * - :py:attr:`~GroupSimilarObjects` - Run the GroupSimilarObjects action. * - :py:attr:`~PropertyByAPIName` - Get a property by its API name. * - :py:attr:`~PropertyByName` - Get a property by its unique name. * - :py:attr:`~RemoveParameter` - Removes the parameter from the parameter set corresponding to the given property. * - :py:attr:`~SetAutomaticMassScalingType` - Sets the AutomaticMassScalingType for a load step. * - :py:attr:`~SetLoadStepType` - Sets the LoadStepType for a step. * - :py:attr:`~SetMassScalingMinTimeStep` - Sets the MassScalingMinTimeStep for a load step. * - :py:attr:`~SetSaveProbeDataOnTime` - Set the Time increment for Save ProbeData On for a load step. * - :py:attr:`~SetSaveProbeDataOnTimeSteps` - Set the Cycle increment for Save ProbeData On for a load step. * - :py:attr:`~SetSaveProbeDataOnType` - Sets the Save ProbeData Type for a load step. * - :py:attr:`~SetSaveRestartsOnPoints` - Set the Points increment for Save Restarts On for a load step. * - :py:attr:`~SetSaveRestartsOnTime` - Set the Time increment for Save Restarts On for a load step. * - :py:attr:`~SetSaveRestartsOnTimeSteps` - Set the Cycle increment for Save Restarts On for a load step. * - :py:attr:`~SetSaveRestartsOnType` - Sets the Save Restarts Type for a load step. * - :py:attr:`~SetSaveResultsOnPoints` - Set the Points increment for Save Results On for a load step. * - :py:attr:`~SetSaveResultsOnTime` - Set the Time increment for Save Results On for a load step. * - :py:attr:`~SetSaveResultsOnTimeSteps` - Sets the Cycle increment for Save Results On for a load step. * - :py:attr:`~SetSaveResultsOnType` - Sets the Save Results Type for a load step. * - :py:attr:`~SetStaticDamping` - Sets the StaticDamping. * - :py:attr:`~SetStepEndTime` - Sets the Step End Time for a given solution step. * - :py:attr:`~getADRConvergenceMethod` - Gets the Covergence Method for ADR loadstep. * - :py:attr:`~getADRConvergenceTolerance` - Gets the Covergence Tolerance for ADR loadstep. * - :py:attr:`~getADRMaximumIterations` - Gets the Maximum Iterations for ADR loadstep. * - :py:attr:`~setADRConvergenceMethod` - Sets the Covergence Method for ADR loadstep. * - :py:attr:`~setADRConvergenceTolerance` - Sets the Covergence Tolerance for ADR loadstep. * - :py:attr:`~setADRMaximumIterations` - Sets the Maximum Iterations for ADR loadstep. .. tab-item:: Properties .. list-table:: :header-rows: 0 :widths: auto * - :py:attr:`~ArtificialViscosityForShellsType` - Gets or sets the ArtificialViscosityForShellsType. * - :py:attr:`~AutomaticMassScalingType` - Gets or sets the AutomaticMassScaling. * - :py:attr:`~BeamSolutionType` - Gets or sets the BeamSolutionType. * - :py:attr:`~BeamTimeStepSafetyFactor` - Gets or sets the BeamTimeStepSafetyFactor. * - :py:attr:`~CharZoneDimensionType` - Gets or sets the CharZoneDimensionType. * - :py:attr:`~Children` - Gets the list of children. * - :py:attr:`~Comments` - Gets the list of associated comments. * - :py:attr:`~CurrentStepNumber` - Gets or sets the CurrentStepNumber. * - :py:attr:`~DataModelObjectCategory` - Gets the current DataModelObject's category. * - :py:attr:`~DensityUpdateType` - Gets or sets the DensityUpdateType. * - :py:attr:`~DetonationBurnType` - Gets or sets the DetonationBurnType. * - :py:attr:`~ErosionGeomStrainLimit` - Gets or sets the ErosionGeomStrainLimit * - :py:attr:`~ErosionMinElemTimestep` - Gets or sets the ErosionMinElemTimestep * - :py:attr:`~ErosionOnGeomStrainType` - Gets or sets the ErosionOnGeomStrainType. * - :py:attr:`~ErosionOnMaterialFailureType` - Gets or sets the ErosionOnMaterialFailureType * - :py:attr:`~ErosionOnMinElemTimestepType` - Gets or sets the ErosionOnMinElemTimestepType * - :py:attr:`~ErosionRetainIntertiaType` - Gets or sets the ErosionRetainIntertiaType * - :py:attr:`~EulerBoundLowerX` - Gets or sets the EulerBoundLowerX. * - :py:attr:`~EulerBoundLowerY` - Gets or sets the EulerBoundLowerY. * - :py:attr:`~EulerBoundLowerZ` - Gets or sets the EulerBoundLowerZ. * - :py:attr:`~EulerBoundUpperX` - Gets or sets the EulerBoundUpperX. * - :py:attr:`~EulerBoundUpperY` - Gets or sets the EulerBoundUpperY. * - :py:attr:`~EulerBoundUpperZ` - Gets or sets the EulerBoundUpperZ. * - :py:attr:`~EulerCellSize` - Gets or sets the EulerCellSize. * - :py:attr:`~EulerDisplayBox` - Gets or sets the EulerDisplayBox. * - :py:attr:`~EulerDomScopeDefType` - Gets or sets the EulerDomScopeDefType. * - :py:attr:`~EulerDomainType` - Gets or sets the EulerDomainType. * - :py:attr:`~EulerGradeIncrement` - Gets or sets the EulerGradeIncrement. * - :py:attr:`~EulerGradeNumberOfTimes` - Gets or sets the EulerGradeNumberOfTimes. * - :py:attr:`~EulerGradedDefinition` - Gets or sets the EulerGradedDefinition. * - :py:attr:`~EulerPropertyDisplayBox` - Gets or sets the EulerPropertyDisplayBox. * - :py:attr:`~EulerPropertyXmin` - Gets or sets the EulerPropertyXmin. * - :py:attr:`~EulerPropertyXres` - Gets or sets the EulerPropertyXres. * - :py:attr:`~EulerPropertyXsize` - Gets or sets the EulerPropertyXsize. * - :py:attr:`~EulerPropertyYmin` - Gets or sets the EulerPropertyYmin. * - :py:attr:`~EulerPropertyYres` - Gets or sets the EulerPropertyYres. * - :py:attr:`~EulerPropertyYsize` - Gets or sets the EulerPropertyYsize. * - :py:attr:`~EulerPropertyZmin` - Gets or sets the EulerPropertyZmin. * - :py:attr:`~EulerPropertyZres` - Gets or sets the EulerPropertyZres. * - :py:attr:`~EulerPropertyZsize` - Gets or sets the EulerPropertyZsize. * - :py:attr:`~EulerResolutionDefType` - Gets or sets the EulerResolutionDefType. * - :py:attr:`~EulerSizeDefType` - Gets or sets the EulerSizeDefType. * - :py:attr:`~EulerTotalCells` - Gets or sets the EulerTotalCells. * - :py:attr:`~EulerTrackType` - Gets the EulerTrackType. * - :py:attr:`~EulerXDim` - Gets or sets the EulerXDim. * - :py:attr:`~EulerXOrigin` - Gets or sets the EulerXOrigin. * - :py:attr:`~EulerXScaleFactor` - Gets or sets the EulerXScaleFactor. * - :py:attr:`~EulerXZones` - Gets or sets the EulerXZones. * - :py:attr:`~EulerYDim` - Gets or sets the EulerYDim. * - :py:attr:`~EulerYOrigin` - Gets or sets the EulerYOrigin. * - :py:attr:`~EulerYScaleFactor` - Gets or sets the EulerYScaleFactor. * - :py:attr:`~EulerYZones` - Gets or sets the EulerYZones. * - :py:attr:`~EulerZDim` - Gets or sets the EulerZDim. * - :py:attr:`~EulerZOrigin` - Gets or sets the EulerZOrigin. * - :py:attr:`~EulerZScaleFactor` - Gets or sets the EulerZScaleFactor. * - :py:attr:`~EulerZZones` - Gets or sets the EulerZZones. * - :py:attr:`~Figures` - Gets the list of associated figures. * - :py:attr:`~Graph` - Graph property. * - :py:attr:`~HexIntegrationType` - Gets or sets the HexIntegrationType. * - :py:attr:`~HourglassDampingType` - Gets or sets the HourglassDampingType. * - :py:attr:`~Images` - Gets the list of associated images. * - :py:attr:`~InitialTimeStep` - Gets or sets the InitialTimeStep. * - :py:attr:`~InternalObject` - Gets the Internal Object. For advanced usage only. * - :py:attr:`~LinearArtificialViscosity` - Gets or sets the LinearArtificialViscosity. * - :py:attr:`~LinearViscosityExpansionType` - Gets or sets the LinearViscosityExpansionType. * - :py:attr:`~LinearViscositySPH` - Gets or sets the Linear Artificial Viscosity for SPH. * - :py:attr:`~MassScalingMaxElem` - Gets or sets the MassScalingMaxElem. * - :py:attr:`~MassScalingMaxPart` - Gets or sets the MassScalingMaxPart. * - :py:attr:`~MassScalingMinTimeStep` - Gets or sets the MassScalingMinTimeStep. * - :py:attr:`~MassScalingUpdateFreq` - Gets or sets the MassScalingUpdateFreq. * - :py:attr:`~MaximumEnergyError` - Gets or sets the MaximumEnergyError. * - :py:attr:`~MaximumTimeStep` - Gets or sets the MaximumTimeStep. * - :py:attr:`~MaximumTimeSteps` - Gets or sets the MaximumNumberofCycles. * - :py:attr:`~MaximumVelocity` - Gets or sets the MaximumVelocity. * - :py:attr:`~MinimumStrainCutOff` - Gets or sets the MinimumStrainCutOff. * - :py:attr:`~MinimumTimeStep` - Gets or sets the MinimumTimeStep. * - :py:attr:`~MinimumVelocity` - Gets or sets the MinimumVelocity. * - :py:attr:`~NumberOfSteps` - Gets or sets the NumberOfSteps. * - :py:attr:`~OutputContactForcesOnPoints` - Gets or Sets the Points increment for OutputContactForcesOnPoints. * - :py:attr:`~OutputContactForcesOnTime` - Gets or Sets the Time increment for OutputContactForcesOnTime. * - :py:attr:`~OutputContactForcesOnTimeSteps` - Gets or Sets the Cycle increment for OutputContactForcesOnTimeSteps. * - :py:attr:`~OutputContactForcesOnType` - Gets or Sets OutputContactForces Increment Type. * - :py:attr:`~OutputRemapFile` - Gets or Sets the Output Remap File Type. * - :py:attr:`~PreferenceType` - Gets or sets the PreferenceType * - :py:attr:`~Properties` - Gets the list of properties for this object. * - :py:attr:`~PusoCoefficient` - Gets or sets the PusoCoefficient. * - :py:attr:`~QuadraticArtificialViscosity` - Gets or sets the QuadraticArtificialViscosity. * - :py:attr:`~QuadratricViscositySPH` - Gets or sets the Quadratic Artificial Viscosity for SPH. * - :py:attr:`~RadiusCutoff` - Gets or sets the RadiusCutoff. * - :py:attr:`~ReferenceEnergyTimeStep` - Gets or sets the ReferenceEnergyCycle. * - :py:attr:`~ResumeFromTimeStep` - Gets or sets the ResumeFromCycle. * - :py:attr:`~SPHMaxDensityFactor` - Gets or sets the Maximum Density Factor for SPH. * - :py:attr:`~SPHMinDensityFactor` - Gets or sets the Minimum Density Factor for SPH. * - :py:attr:`~SPHNodeDensityCutoffOption` - Gets or sets the SPHNodeDensityCutoffOption. * - :py:attr:`~SavePrintSummaryOnTime` - Gets or Sets the Time increment for SavePrintSummaryOnTime. * - :py:attr:`~SavePrintSummaryOnTimeSteps` - Gets or Sets Cycle increment for SavePrintSummaryOnTimeSteps. * - :py:attr:`~SavePrintSummaryOnType` - Gets or Sets SavePrintSummaryOnType. * - :py:attr:`~SaveUserEditOnTime` - Gets or Sets Time increment for SaveUserEditOnTime. * - :py:attr:`~SaveUserEditOnTimeSteps` - Gets or Sets Cycle increment for SaveUserEditOnTimeSteps. * - :py:attr:`~SaveUserEditOnType` - Gets or Sets SaveUserEditOnType. * - :py:attr:`~ScratchSolverFilesDirectory` - Gets the ScratchSolverFilesDirectory. * - :py:attr:`~ShellInertiaUpdateType` - Gets or sets the ShellInertiaUpdateType. * - :py:attr:`~ShellShearCorrectionFactor` - Gets or sets the ShellShearCorrectionFactor. * - :py:attr:`~ShellSublayers` - Gets or sets the ShellSublayers. * - :py:attr:`~ShellThicknessUpdateType` - Gets or sets the ShellThicknessUpdateType. * - :py:attr:`~ShellWarpCorrection` - Gets or sets the ShellWarpCorrection. * - :py:attr:`~SolveUnits` - Gets or sets the SolveUnits. * - :py:attr:`~SolverFilesDirectory` - Gets the SolverFilesDirectory. * - :py:attr:`~SolverPrecisionType` - Gets or sets the SolverPrecisionType. * - :py:attr:`~SphMinTimeStep` - Gets or sets the Minimum Timestep for SPH. * - :py:attr:`~StepawareMassScalingType` - Gets or Sets the Step aware Mass Scaling Controls. * - :py:attr:`~StepawareOutputControlsType` - Gets or Sets the Step aware Output Controls. * - :py:attr:`~StiffnessCoefficient` - Gets or sets the StiffnessCoefficient. * - :py:attr:`~TetPressureIntegrationType` - Gets or sets the TetIntegrationType. * - :py:attr:`~TimeStepSafetyFactor` - Gets or sets the TimeStepSafetyFactor. * - :py:attr:`~ViscousCoefficient` - Gets or sets the ViscousCoefficient. * - :py:attr:`~ViscousCoefficientFB` - Gets or sets the ViscousCoefficientFB. * - :py:attr:`~VisibleProperties` - Gets the list of properties that are visible for this object. Property detail --------------- .. py:property:: ArtificialViscosityForShellsType :type: Optional[bool] Gets or sets the ArtificialViscosityForShellsType. .. !! processed by numpydoc !! .. py:property:: AutomaticMassScalingType :type: Optional[bool] Gets or sets the AutomaticMassScaling. .. !! processed by numpydoc !! .. py:property:: BeamSolutionType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDBeamSolutionType] Gets or sets the BeamSolutionType. .. !! processed by numpydoc !! .. py:property:: BeamTimeStepSafetyFactor :type: Optional[float] Gets or sets the BeamTimeStepSafetyFactor. .. !! processed by numpydoc !! .. py:property:: CharZoneDimensionType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDCharZoneDimensionType] Gets or sets the CharZoneDimensionType. .. !! processed by numpydoc !! .. py:property:: Children :type: Optional[List[Ansys.Mechanical.DataModel.Interfaces.IDataModelObject]] Gets the list of children. .. !! processed by numpydoc !! .. py:property:: Comments :type: Optional[Iterable[Ansys.ACT.Automation.Mechanical.Comment]] Gets the list of associated comments. .. !! processed by numpydoc !! .. py:property:: CurrentStepNumber :type: Optional[int] Gets or sets the CurrentStepNumber. .. !! processed by numpydoc !! .. py:property:: DataModelObjectCategory :type: Optional[Ansys.Mechanical.DataModel.Enums.DataModelObjectCategory] Gets the current DataModelObject's category. .. !! processed by numpydoc !! .. py:property:: DensityUpdateType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDDensityUpdateType] Gets or sets the DensityUpdateType. .. !! processed by numpydoc !! .. py:property:: DetonationBurnType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDDetonationBurnType] Gets or sets the DetonationBurnType. .. !! processed by numpydoc !! .. py:property:: ErosionGeomStrainLimit :type: Optional[float] Gets or sets the ErosionGeomStrainLimit .. !! processed by numpydoc !! .. py:property:: ErosionMinElemTimestep :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the ErosionMinElemTimestep .. !! processed by numpydoc !! .. py:property:: ErosionOnGeomStrainType :type: Optional[bool] Gets or sets the ErosionOnGeomStrainType. .. !! processed by numpydoc !! .. py:property:: ErosionOnMaterialFailureType :type: Optional[bool] Gets or sets the ErosionOnMaterialFailureType .. !! processed by numpydoc !! .. py:property:: ErosionOnMinElemTimestepType :type: Optional[bool] Gets or sets the ErosionOnMinElemTimestepType .. !! processed by numpydoc !! .. py:property:: ErosionRetainIntertiaType :type: Optional[bool] Gets or sets the ErosionRetainIntertiaType .. !! processed by numpydoc !! .. py:property:: EulerBoundLowerX :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType] Gets or sets the EulerBoundLowerX. .. !! processed by numpydoc !! .. py:property:: EulerBoundLowerY :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType] Gets or sets the EulerBoundLowerY. .. !! processed by numpydoc !! .. py:property:: EulerBoundLowerZ :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType] Gets or sets the EulerBoundLowerZ. .. !! processed by numpydoc !! .. py:property:: EulerBoundUpperX :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType] Gets or sets the EulerBoundUpperX. .. !! processed by numpydoc !! .. py:property:: EulerBoundUpperY :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType] Gets or sets the EulerBoundUpperY. .. !! processed by numpydoc !! .. py:property:: EulerBoundUpperZ :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerBoundaryDefType] Gets or sets the EulerBoundUpperZ. .. !! processed by numpydoc !! .. py:property:: EulerCellSize :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerCellSize. .. !! processed by numpydoc !! .. py:property:: EulerDisplayBox :type: Optional[bool] Gets or sets the EulerDisplayBox. .. !! processed by numpydoc !! .. py:property:: EulerDomScopeDefType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerDomScopeDefType] Gets or sets the EulerDomScopeDefType. .. !! processed by numpydoc !! .. py:property:: EulerDomainType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerDomainType] Gets or sets the EulerDomainType. .. !! processed by numpydoc !! .. py:property:: EulerGradeIncrement :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerGradeIncrement. .. !! processed by numpydoc !! .. py:property:: EulerGradeNumberOfTimes :type: Optional[int] Gets or sets the EulerGradeNumberOfTimes. .. !! processed by numpydoc !! .. py:property:: EulerGradedDefinition :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerGradedDefinition] Gets or sets the EulerGradedDefinition. .. !! processed by numpydoc !! .. py:property:: EulerPropertyDisplayBox :type: Optional[bool] Gets or sets the EulerPropertyDisplayBox. .. !! processed by numpydoc !! .. py:property:: EulerPropertyXmin :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerPropertyXmin. .. !! processed by numpydoc !! .. py:property:: EulerPropertyXres :type: Optional[int] Gets or sets the EulerPropertyXres. .. !! processed by numpydoc !! .. py:property:: EulerPropertyXsize :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerPropertyXsize. .. !! processed by numpydoc !! .. py:property:: EulerPropertyYmin :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerPropertyYmin. .. !! processed by numpydoc !! .. py:property:: EulerPropertyYres :type: Optional[int] Gets or sets the EulerPropertyYres. .. !! processed by numpydoc !! .. py:property:: EulerPropertyYsize :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerPropertyYsize. .. !! processed by numpydoc !! .. py:property:: EulerPropertyZmin :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerPropertyZmin. .. !! processed by numpydoc !! .. py:property:: EulerPropertyZres :type: Optional[int] Gets or sets the EulerPropertyZres. .. !! processed by numpydoc !! .. py:property:: EulerPropertyZsize :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerPropertyZsize. .. !! processed by numpydoc !! .. py:property:: EulerResolutionDefType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerResolutionDefType] Gets or sets the EulerResolutionDefType. .. !! processed by numpydoc !! .. py:property:: EulerSizeDefType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerSizeDefType] Gets or sets the EulerSizeDefType. .. !! processed by numpydoc !! .. py:property:: EulerTotalCells :type: Optional[int] Gets or sets the EulerTotalCells. .. !! processed by numpydoc !! .. py:property:: EulerTrackType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDEulerTrackType] Gets the EulerTrackType. .. !! processed by numpydoc !! .. py:property:: EulerXDim :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerXDim. .. !! processed by numpydoc !! .. py:property:: EulerXOrigin :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerXOrigin. .. !! processed by numpydoc !! .. py:property:: EulerXScaleFactor :type: Optional[float] Gets or sets the EulerXScaleFactor. .. !! processed by numpydoc !! .. py:property:: EulerXZones :type: Optional[int] Gets or sets the EulerXZones. .. !! processed by numpydoc !! .. py:property:: EulerYDim :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerYDim. .. !! processed by numpydoc !! .. py:property:: EulerYOrigin :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerYOrigin. .. !! processed by numpydoc !! .. py:property:: EulerYScaleFactor :type: Optional[float] Gets or sets the EulerYScaleFactor. .. !! processed by numpydoc !! .. py:property:: EulerYZones :type: Optional[int] Gets or sets the EulerYZones. .. !! processed by numpydoc !! .. py:property:: EulerZDim :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerZDim. .. !! processed by numpydoc !! .. py:property:: EulerZOrigin :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the EulerZOrigin. .. !! processed by numpydoc !! .. py:property:: EulerZScaleFactor :type: Optional[float] Gets or sets the EulerZScaleFactor. .. !! processed by numpydoc !! .. py:property:: EulerZZones :type: Optional[int] Gets or sets the EulerZZones. .. !! processed by numpydoc !! .. py:property:: Figures :type: Optional[Iterable[Ansys.ACT.Automation.Mechanical.Figure]] Gets the list of associated figures. .. !! processed by numpydoc !! .. py:property:: Graph :type: Optional[Ansys.Mechanical.Graphics.AnalysisSettingsGraph] Graph property. .. !! processed by numpydoc !! .. py:property:: HexIntegrationType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDHexIntegrationType] Gets or sets the HexIntegrationType. .. !! processed by numpydoc !! .. py:property:: HourglassDampingType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDHourglassDampingType] Gets or sets the HourglassDampingType. .. !! processed by numpydoc !! .. py:property:: Images :type: Optional[Iterable[Ansys.ACT.Automation.Mechanical.Image]] Gets the list of associated images. .. !! processed by numpydoc !! .. py:property:: InitialTimeStep :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the InitialTimeStep. .. !! processed by numpydoc !! .. py:property:: InternalObject :type: Optional[Any] Gets the Internal Object. For advanced usage only. .. !! processed by numpydoc !! .. py:property:: LinearArtificialViscosity :type: Optional[float] Gets or sets the LinearArtificialViscosity. .. !! processed by numpydoc !! .. py:property:: LinearViscosityExpansionType :type: Optional[bool] Gets or sets the LinearViscosityExpansionType. .. !! processed by numpydoc !! .. py:property:: LinearViscositySPH :type: Optional[float] Gets or sets the Linear Artificial Viscosity for SPH. .. !! processed by numpydoc !! .. py:property:: MassScalingMaxElem :type: Optional[float] Gets or sets the MassScalingMaxElem. .. !! processed by numpydoc !! .. py:property:: MassScalingMaxPart :type: Optional[float] Gets or sets the MassScalingMaxPart. .. !! processed by numpydoc !! .. py:property:: MassScalingMinTimeStep :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the MassScalingMinTimeStep. .. !! processed by numpydoc !! .. py:property:: MassScalingUpdateFreq :type: Optional[int] Gets or sets the MassScalingUpdateFreq. .. !! processed by numpydoc !! .. py:property:: MaximumEnergyError :type: Optional[float] Gets or sets the MaximumEnergyError. .. !! processed by numpydoc !! .. py:property:: MaximumTimeStep :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the MaximumTimeStep. .. !! processed by numpydoc !! .. py:property:: MaximumTimeSteps :type: Optional[int] Gets or sets the MaximumNumberofCycles. .. !! processed by numpydoc !! .. py:property:: MaximumVelocity :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the MaximumVelocity. .. !! processed by numpydoc !! .. py:property:: MinimumStrainCutOff :type: Optional[float] Gets or sets the MinimumStrainCutOff. .. !! processed by numpydoc !! .. py:property:: MinimumTimeStep :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the MinimumTimeStep. .. !! processed by numpydoc !! .. py:property:: MinimumVelocity :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the MinimumVelocity. .. !! processed by numpydoc !! .. py:property:: NumberOfSteps :type: Optional[int] Gets or sets the NumberOfSteps. .. !! processed by numpydoc !! .. py:property:: OutputContactForcesOnPoints :type: Optional[int] Gets or Sets the Points increment for OutputContactForcesOnPoints. .. !! processed by numpydoc !! .. py:property:: OutputContactForcesOnTime :type: Optional[Ansys.Core.Units.Quantity] Gets or Sets the Time increment for OutputContactForcesOnTime. .. !! processed by numpydoc !! .. py:property:: OutputContactForcesOnTimeSteps :type: Optional[int] Gets or Sets the Cycle increment for OutputContactForcesOnTimeSteps. .. !! processed by numpydoc !! .. py:property:: OutputContactForcesOnType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDOutputContactForcesOnType] Gets or Sets OutputContactForces Increment Type. .. !! processed by numpydoc !! .. py:property:: OutputRemapFile :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDOutputRemapFileOnType] Gets or Sets the Output Remap File Type. .. !! processed by numpydoc !! .. py:property:: PreferenceType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDPreferenceType] Gets or sets the PreferenceType .. !! processed by numpydoc !! .. py:property:: Properties :type: Optional[tuple[Ansys.ACT.Automation.Mechanical.Property]] Gets the list of properties for this object. .. !! processed by numpydoc !! .. py:property:: PusoCoefficient :type: Optional[float] Gets or sets the PusoCoefficient. .. !! processed by numpydoc !! .. py:property:: QuadraticArtificialViscosity :type: Optional[float] Gets or sets the QuadraticArtificialViscosity. .. !! processed by numpydoc !! .. py:property:: QuadratricViscositySPH :type: Optional[float] Gets or sets the Quadratic Artificial Viscosity for SPH. .. !! processed by numpydoc !! .. py:property:: RadiusCutoff :type: Optional[float] Gets or sets the RadiusCutoff. .. !! processed by numpydoc !! .. py:property:: ReferenceEnergyTimeStep :type: Optional[int] Gets or sets the ReferenceEnergyCycle. .. !! processed by numpydoc !! .. py:property:: ResumeFromTimeStep :type: Optional[int] Gets or sets the ResumeFromCycle. .. !! processed by numpydoc !! .. py:property:: SPHMaxDensityFactor :type: Optional[float] Gets or sets the Maximum Density Factor for SPH. .. !! processed by numpydoc !! .. py:property:: SPHMinDensityFactor :type: Optional[float] Gets or sets the Minimum Density Factor for SPH. .. !! processed by numpydoc !! .. py:property:: SPHNodeDensityCutoffOption :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDSPHNodeDensityCutoffOption] Gets or sets the SPHNodeDensityCutoffOption. .. !! processed by numpydoc !! .. py:property:: SavePrintSummaryOnTime :type: Optional[Ansys.Core.Units.Quantity] Gets or Sets the Time increment for SavePrintSummaryOnTime. .. !! processed by numpydoc !! .. py:property:: SavePrintSummaryOnTimeSteps :type: Optional[int] Gets or Sets Cycle increment for SavePrintSummaryOnTimeSteps. .. !! processed by numpydoc !! .. py:property:: SavePrintSummaryOnType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDSavePrintSummaryOnType] Gets or Sets SavePrintSummaryOnType. .. !! processed by numpydoc !! .. py:property:: SaveUserEditOnTime :type: Optional[Ansys.Core.Units.Quantity] Gets or Sets Time increment for SaveUserEditOnTime. .. !! processed by numpydoc !! .. py:property:: SaveUserEditOnTimeSteps :type: Optional[int] Gets or Sets Cycle increment for SaveUserEditOnTimeSteps. .. !! processed by numpydoc !! .. py:property:: SaveUserEditOnType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDSaveUserEditOnType] Gets or Sets SaveUserEditOnType. .. !! processed by numpydoc !! .. py:property:: ScratchSolverFilesDirectory :type: Optional[str] Gets the ScratchSolverFilesDirectory. .. !! processed by numpydoc !! .. py:property:: ShellInertiaUpdateType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDShellInertiaUpdateType] Gets or sets the ShellInertiaUpdateType. .. !! processed by numpydoc !! .. py:property:: ShellShearCorrectionFactor :type: Optional[float] Gets or sets the ShellShearCorrectionFactor. .. !! processed by numpydoc !! .. py:property:: ShellSublayers :type: Optional[int] Gets or sets the ShellSublayers. .. !! processed by numpydoc !! .. py:property:: ShellThicknessUpdateType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDShellThicknessUpdateType] Gets or sets the ShellThicknessUpdateType. .. !! processed by numpydoc !! .. py:property:: ShellWarpCorrection :type: Optional[bool] Gets or sets the ShellWarpCorrection. .. !! processed by numpydoc !! .. py:property:: SolveUnits :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDSolveUnitsType] Gets or sets the SolveUnits. .. !! processed by numpydoc !! .. py:property:: SolverFilesDirectory :type: Optional[str] Gets the SolverFilesDirectory. .. !! processed by numpydoc !! .. py:property:: SolverPrecisionType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDSolverPrecisionType] Gets or sets the SolverPrecisionType. .. !! processed by numpydoc !! .. py:property:: SphMinTimeStep :type: Optional[Ansys.Core.Units.Quantity] Gets or sets the Minimum Timestep for SPH. .. !! processed by numpydoc !! .. py:property:: StepawareMassScalingType :type: Optional[bool] Gets or Sets the Step aware Mass Scaling Controls. .. !! processed by numpydoc !! .. py:property:: StepawareOutputControlsType :type: Optional[bool] Gets or Sets the Step aware Output Controls. .. !! processed by numpydoc !! .. py:property:: StiffnessCoefficient :type: Optional[float] Gets or sets the StiffnessCoefficient. .. !! processed by numpydoc !! .. py:property:: TetPressureIntegrationType :type: Optional[Ansys.Mechanical.DataModel.Enums.EXDTetPressureIntegrationType] Gets or sets the TetIntegrationType. .. !! processed by numpydoc !! .. py:property:: TimeStepSafetyFactor :type: Optional[float] Gets or sets the TimeStepSafetyFactor. .. !! processed by numpydoc !! .. py:property:: ViscousCoefficient :type: Optional[float] Gets or sets the ViscousCoefficient. .. !! processed by numpydoc !! .. py:property:: ViscousCoefficientFB :type: Optional[float] Gets or sets the ViscousCoefficientFB. .. !! processed by numpydoc !! .. py:property:: VisibleProperties :type: Optional[tuple[Ansys.ACT.Automation.Mechanical.Property]] Gets the list of properties that are visible for this object. .. !! processed by numpydoc !! Method detail ------------- .. py:method:: Activate() -> None Activate the current object. .. !! processed by numpydoc !! .. py:method:: AddComment() -> Ansys.ACT.Automation.Mechanical.Comment Creates a new child Comment. .. !! processed by numpydoc !! .. py:method:: AddFigure() -> Ansys.ACT.Automation.Mechanical.Figure Creates a new child Figure. .. !! processed by numpydoc !! .. py:method:: AddImage(filePath: str) -> Ansys.ACT.Automation.Mechanical.Image .. code-block:: text Creates a new child Image. If a filePath is provided, the image will be loaded from that file, if not, the image will be a screen capture of the Geometry window. .. !! processed by numpydoc !! .. py:method:: CopyTo(other: Ansys.ACT.Automation.Mechanical.DataModelObject) -> None Copies all visible properties from this object to another. .. !! processed by numpydoc !! .. py:method:: CreateParameter(propName: str) -> Ansys.ACT.Interfaces.Mechanical.IParameter Creates a new parameter for a Property. .. !! processed by numpydoc !! .. py:method:: DeleteAllRestartPoints() -> None DeleteAllRestartPoints method. .. !! processed by numpydoc !! .. py:method:: Duplicate() -> Ansys.Mechanical.DataModel.Interfaces.IDataModelObject Creates a copy of the current DataModelObject. .. !! processed by numpydoc !! .. py:method:: GetAutomaticMassScalingType(stepNumber: int) -> bool Gets the AutomaticMassScalingType for a load step. .. !! processed by numpydoc !! .. py:method:: GetChildren(recurses: bool, children: List[ChildrenType]) -> List[ChildrenType] Gets the list of children, filtered by type. .. !! processed by numpydoc !! .. py:method:: GetLoadStepType(stepNumber: int) -> Ansys.Mechanical.DataModel.Enums.EXDLoadStepType Gets the LoadStepType for a step. .. !! processed by numpydoc !! .. py:method:: GetMassScalingMinTimeStep(stepNumber: int) -> Ansys.Core.Units.Quantity Gets the MassScalingMinTimeStep for a load step. .. !! processed by numpydoc !! .. py:method:: GetParameter(propName: str) -> Ansys.ACT.Interfaces.Mechanical.IParameter Gets the parameter corresponding to the given property. .. !! processed by numpydoc !! .. py:method:: GetSaveProbeDataOnTime(stepNumber: int) -> Ansys.Core.Units.Quantity Gets the Time increment for Save ProbeData On for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveProbeDataOnTimeSteps(stepNumber: int) -> int Gets the Cycle increment for Save ProbeData On for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveProbeDataOnType(stepNumber: int) -> Ansys.Mechanical.DataModel.Enums.EXDSaveProbeDataOnType Gets the Save ProbeData Type for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveRestartsOnPoints(stepNumber: int) -> int Gets the Points increment for Save Restarts On Points for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveRestartsOnTime(stepNumber: int) -> Ansys.Core.Units.Quantity Gets the Time increment for Save Restarts On for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveRestartsOnTimeSteps(stepNumber: int) -> int Gets the Cycle increment for Save Restarts On for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveRestartsOnType(stepNumber: int) -> Ansys.Mechanical.DataModel.Enums.EXDSaveRestartsOnType Gets the Save Restarts Type for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveResultsOnPoints(stepNumber: int) -> int Gets the Points increment for Save Results On for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveResultsOnTime(stepNumber: int) -> Ansys.Core.Units.Quantity Gets the Time increment for Save Results On for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveResultsOnTimeSteps(stepNumber: int) -> int Gets the Cycle increment for Save Results On for a load step. .. !! processed by numpydoc !! .. py:method:: GetSaveResultsOnType(stepNumber: int) -> Ansys.Mechanical.DataModel.Enums.EXDSaveResultsOnType Gets the Save Results Type for a load step. .. !! processed by numpydoc !! .. py:method:: GetStaticDamping(stepNumber: int) -> Any Gets the StaticDamping. .. !! processed by numpydoc !! .. py:method:: GetStepEndTime(stepNumber: int) -> Ansys.Core.Units.Quantity Gets the Step End Time at a given solution step. .. !! processed by numpydoc !! .. py:method:: GroupAllSimilarChildren() -> None Run the GroupAllSimilarChildren action. .. !! processed by numpydoc !! .. py:method:: GroupSimilarObjects() -> Ansys.ACT.Automation.Mechanical.TreeGroupingFolder Run the GroupSimilarObjects action. .. !! processed by numpydoc !! .. py:method:: PropertyByAPIName(name: str) -> Ansys.ACT.Automation.Mechanical.Property .. code-block:: text Get a property by its API name. If multiple properties have the same API Name, only the first property with that name will be returned. .. !! processed by numpydoc !! .. py:method:: PropertyByName(name: str) -> Ansys.ACT.Automation.Mechanical.Property Get a property by its unique name. .. !! processed by numpydoc !! .. py:method:: RemoveParameter(propName: str) -> None Removes the parameter from the parameter set corresponding to the given property. .. !! processed by numpydoc !! .. py:method:: SetAutomaticMassScalingType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDAutomaticMassScalingType) -> None Sets the AutomaticMassScalingType for a load step. .. !! processed by numpydoc !! .. py:method:: SetLoadStepType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDLoadStepType) -> None Sets the LoadStepType for a step. .. !! processed by numpydoc !! .. py:method:: SetMassScalingMinTimeStep(stepNumber: int, value: Ansys.Core.Units.Quantity) -> None Sets the MassScalingMinTimeStep for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveProbeDataOnTime(stepNumber: int, value: Ansys.Core.Units.Quantity) -> None Set the Time increment for Save ProbeData On for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveProbeDataOnTimeSteps(stepNumber: int, value: int) -> None Set the Cycle increment for Save ProbeData On for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveProbeDataOnType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDSaveProbeDataOnType) -> None Sets the Save ProbeData Type for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveRestartsOnPoints(stepNumber: int, value: int) -> None Set the Points increment for Save Restarts On for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveRestartsOnTime(stepNumber: int, value: Ansys.Core.Units.Quantity) -> None Set the Time increment for Save Restarts On for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveRestartsOnTimeSteps(stepNumber: int, value: int) -> None Set the Cycle increment for Save Restarts On for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveRestartsOnType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDSaveRestartsOnType) -> None Sets the Save Restarts Type for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveResultsOnPoints(stepNumber: int, value: int) -> None Set the Points increment for Save Results On for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveResultsOnTime(stepNumber: int, value: Ansys.Core.Units.Quantity) -> None Set the Time increment for Save Results On for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveResultsOnTimeSteps(stepNumber: int, value: int) -> None Sets the Cycle increment for Save Results On for a load step. .. !! processed by numpydoc !! .. py:method:: SetSaveResultsOnType(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDSaveResultsOnType) -> None Sets the Save Results Type for a load step. .. !! processed by numpydoc !! .. py:method:: SetStaticDamping(stepNumber: int, value: float) -> None Sets the StaticDamping. .. !! processed by numpydoc !! .. py:method:: SetStepEndTime(stepNumber: int, value: Ansys.Core.Units.Quantity) -> None Sets the Step End Time for a given solution step. .. !! processed by numpydoc !! .. py:method:: getADRConvergenceMethod(stepNumber: int) -> Ansys.Mechanical.DataModel.Enums.EXDADRConvergenceMethod Gets the Covergence Method for ADR loadstep. .. !! processed by numpydoc !! .. py:method:: getADRConvergenceTolerance(stepNumber: int) -> Any Gets the Covergence Tolerance for ADR loadstep. .. !! processed by numpydoc !! .. py:method:: getADRMaximumIterations(stepNumber: int) -> Any Gets the Maximum Iterations for ADR loadstep. .. !! processed by numpydoc !! .. py:method:: setADRConvergenceMethod(stepNumber: int, value: Ansys.Mechanical.DataModel.Enums.EXDADRConvergenceMethod) -> None Sets the Covergence Method for ADR loadstep. .. !! processed by numpydoc !! .. py:method:: setADRConvergenceTolerance(stepNumber: int, value: float) -> None Sets the Covergence Tolerance for ADR loadstep. .. !! processed by numpydoc !! .. py:method:: setADRMaximumIterations(stepNumber: int, value: int) -> None Sets the Maximum Iterations for ADR loadstep. .. !! processed by numpydoc !! .. vale on